Diadem Error: Cannot Store Complete Internal Data

I am trying to save data in my portal to a TDM, but I get the error: "Cannot store complete internal data in the file "FILENAME.TDM" with the format "TDM". I'm not sure how to diagnose the problem, since the error does not provide much information.
I have a script that pulls together two seperate files, a *.dat and an *.atfx file. It searches through the data to find certain measurments, and then averages a few channels and adds these averages to a new group. I have 16 groups and 257 channels. The file is fairly large, so maybe I am exceeding some limits?
Any ideas?
Thanks.

Perhaps this is related. While I have the data loaded that cannot be saved in the TDM, and I am browsing he help file. I get an error claiming that there is not enough memory for this task. I click ok and diadem abruptly closes. I have attached a screen shot of the error, also showing available system resources, and it seems like I should have plenty available. I have 1.5GB of available memory, and 46GB of available disk space. Why am I getting this error. Is there some setting that limits how much resources diadem can use?
I have also attached a screen shot showing system resources AFTER diadem closed.
Attachments:
Not enough memory error.JPG ‏190 KB
Not enough memory error - Post diadem close.JPG ‏74 KB

Similar Messages

Cannot store complete internal data error

Hello Diadem gurus,
I have some tdms files that I am post processing. I use diadem for that purpose. Some files cause the error "cannot store complete internal data error in the file."
See the attached picture. I assume it may be caused by my page file or a setting within Diadem. Any suggestions on how to prevent this?
Nasty detail is that the source files were actually lost! (I am saving changes made with diadem back into the same file, but in reality it simply overwrites the file.)
Attachments:
diadem error.JPG ‏17 KB

Hi aartjan,
There were a number of improvements made to the TDMS DataPlugin, which debuted with DIAdem 10.1. These improvements are available for download at www.ni.com/dataplugins for DIAdem 10.1 users. However, there was one fix made that was too extensive to backport to the DIAdem 10.1 codebase, and this I believe is the one you need. This last fix regarded the saving of enormous TDMS files. The TDMS DataPlugin which shipped with DIAdem 10.1 expected to fit all the data values into memory at one time. The TDMS DataPlugin which ships with DIAdem 10.2 Beta3 is able to buffer the data values to disk, therefore not requiring the entire file to fit in memory in order to succeed in exporting it to TDMS file.
The good news is that if you install DIAdem 10.2 Beta3 you will get the DIAdem 10.2 USI layer along with the correct TDMS DataPlugin. Then even if you uninstall DIAdem 10.2 Beta3, the newer USI and TDMS DataPlugin will remain and work correctly with your DIAdem 10.1. You can get the DIAdem 10.2 Beta3 by visiting the www.ni.com/beta website and requesting to participate in the DIAdem 10.2 Beta program. Once you have requested this, remind me to activate your Beta profile, after which you will be able to download the installer.
Regards,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Cannot Store Complete Internal Data in the File "blah Bla" with format ""

Very Unexpected error.
Not sure what to do with this.
See attached file.
I have Diadem Advanced v12
Tim
Solved!
Go to Solution.
Attachments:
Untitled2.png ‏7 KB

I tried saving it in TDMS and TDM.
I was able to save it in excel so I was able to save my data.
Tim

Error "Cannot connect to 'AD' data repository. Your username or password may be incorrect." while login to ESSO Provisioning Gateway

Hi all,
I'm facing a problem while login into ESSO Provisioning Gateway, it throws error "Cannot connect to "AD" data repository. Your username or password may be incorrect.". My Provisioning Gateway version is 11.1.1.5.2 and it is freshly installed. It throws error while I try to set event log in PG setting menu. The symptom is really like document with ID 467150.1 in Oracle Support but my storage is Active Directory as had mentioned above not Oracle Internet Directory. Have anyone ever faced problem like thisOIM? Any help will be very much appreciated. Thanks
Regards
Johan Saragih

I use only support.mozilla.org and never used any other websites. However, the same problem here. My ID and Password are not accepted. Had to create a new account with a temporary email to use Support - it would not allow me to use my main email, because "it is used by another account". Try to reset password - receive no email (even though there is a confirmation on the website that email to reset password has been sent). At the same time can easily receive a confirmation about User ID and account activation. Thus, the account is completely locked, and I can not use my email address for a new one. Please fix this problem.

Activation - Error:Cannot store binary and a few other NWDI questions.

Hi all!
I'm working on the Internet Sales Application (crm/b2b) in CRM 6.0. The work i do is an upgrade from CRM 4 to CRM 6, so I'm new to NWDI.
I'm following the "ISA50DevExtGuideConcepts21.pdf" (since I haven't found a document for version 6), and have managed to add java extensions and librares successfully. I now work on the web-project and have started an activity to merge changes to stylesheets, and also added own mimes like stylesheets and images (.jpg, .gif). The files where added to the project folder (webContent in crm/isa/web/b2b) and then located and added to DTR through a refresh in NWDS. When I try to activate this activity I get the post-proccesing error in the request log below. This might have been caused by an image file renamed to .bak, although its recoginzed as an image in NWDS.
Questions:
1. Any idea what goes wrong? How should I solve this?
2. Can I check out or remove the activity to correct the problem? How?
3. I have a few Activities,already activated on the development server that I would like to get rid of. How do I do that?
4. I have a few Activities that aren't properly named. Is it possible to change the name after activation?
/Anders
CBS Request Log
    ===== Processing ===== started at 2009-04-08 15:53:19.110 GMT
        BUILD DCs
            'sap.com/crm/isa/web/b2b' in variant 'default'
                    'war' PP has been changed. Dependent DCs will be re-built.
                The build was SUCCESSFUL. Archives have been created.
    ===== Processing ===== finished at 2009-04-08 15:54:15.958 GMT and took 56 s 848 ms
    ===== Post-Processing =====
    Waiting for access: 10 ms
    ===== Post-Processing ===== started at 2009-04-08 15:54:15.968 GMT
        Check whether build was successful for all required variants...
            "sap.com/crm/isa/web/b2b" in variant "default"   OK
        STORE activation build results... started at 2009-04-08 15:54:15.972 GMT
            Update DC metadata... started at 2009-04-08 15:54:15.972 GMT
                'sap.com/crm/isa/web/b2b' DC is CHANGED
            Update DC metadata... finished at 2009-04-08 15:54:16.276 GMT and took 304 ms
            STORE build results... started at 2009-04-08 15:54:16.276 GMT
            ===== Post-Processing ===== finished at 2009-04-08 15:54:17.849 GMT and took 1 s 881 ms
            Change request state from PROCESSING to FAILED
            Error! The following problem(s) occurred during request processing:
            Error! The following error occurred during request processing:Database Error:Cannot store binary.
     Original Cause: DB2 SQL Error: SQLCODE=-968, SQLSTATE=57011, SQLERRMC=null, DRIVER=3.50.153
        REQUEST PROCESSING finished at 2009-04-08 15:54:17.855 GMT and took 1 m 6 s 42 ms

I have done some more testing regarding the case with "Database Error:Cannot store binary."
Unfortunately, the behaviour doesn't seem to be consitent or related to particular files. I had a successful activation with 79 of the files in one folder, but could'n add one single file in a new activity. When i removed one of the 79 files and added another file, one of those not possible to add before, it was successful.
After this I tried to remove all 79 files again i one activity, and the add the original 79 files in another. The remove was successful while the adding was unsuccessful. All with the same error message in Request log.
Does anybody have an idea of what is happening here? I don't have a clue.
/Anders

BAPI_BATCH_CHANGE get error : "The format of internal date   . . "

Hi experts,
In my program, i call BAPI_GOODSMVT_CREATE co create Material Doc, then i call BAPI_BATCH_CHANGE to update Last Good Receipt date of material batch. But get the error: "The format of internal date   . . is not correct" of field Shelf Life Expiration Date, although i didn't update this field.
I also tried BDC and another FM to update batch but got the same error. The result is OK if i run BAPI_BATCH_CHANGE in a independent program, but request is 'update batch immediately after create material doc'.
Could you pls help me experts,
Thanks so much,
Hung .

I passed plant adi,
I call BAPI as follow:
    call function 'BAPI_BATCH_CHANGE'
      exporting
        material         = ls_material
        batch            = ls_batch
        plant             = ls_plant
        batchattributes = wa_batchattributes
        batchattributesx = wa_batchattributesx
      tables
        return           = lt_return.

Re: Disk Error - Cannot Continue Retry or Data wil...

i'm using nokia c5-03 n i m havin te same prblm but the solution tats been mentioned is not solvin the prblm i'm using 4gb microsd mc and my os is windows xp plzz help me out

Hi,
Welcome to the forum!
Are you having an issue detecting the memory card? Is it asking for a password? You can remove the password by going to Applications > Office > File mgr. > Options > Memory card password. Otherwise, can you further elaborate your concern for us to provide the proper solution?
Hoping to hear from you soon.

Cannot connect to Business Data Connectivity Metadata Store

I am trying to connect to an external data source (web service) that is hosted on another server through SharePoint designer.
I go to the external content type section->new content type-> External system "click here to discover external data sources and define operations"
Add connection->data source type ="wcf service"
enter url in the "service metadata url" and "service endpoint url"
Try to connect. While trying to connect, it gives me this error
"Cannot connect to Business Data Connectivity Metadata Store"
error details: "The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults(either from ServiceBehaviorAttribute or from the <serviceDebug> configuration
behavior) on the service in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs."
Any help would be greatly appreciated.

Hello.
This solution with New-SPTrustedRootAuthority helped me in the following situation (which is like the one in the topic):
I have a WCF service hosted on the SharePoint web site with dynamic binding. SharePoint web site is configured with host header (DNS alias) and SSL. Kerberous is enabled (this config does not work with NTLM only). I use Secure Store Service identity (Windows
type) when configuring BSC connection to the service. When I try to connect to this WCF service from SharePoint Designer to create an external content type, I get this errror: "Cannot connect to Business Data Connectivity Metadata Store".
These two steps resolved the issue:
1) Add SSL certificate of the web site where WCF service is hosted to the "Trusted Root Certification Authorities" of "Certificates (Local Computer)"
2) Run the following command in SharePoint PowerShell console:
foreach ($cert in (Get-ChildItem cert:\LocalMachine\Root)) { if (!$cert.HasPrivateKey) {New-SPTrustedRootAuthority -Name $cert.Thumbprint -Certificate $cert } }

Cannot display table's data from an Excel File

Hi everyone,
I have uploaded my excel table to ODI but now i got an error message on a window that whenever I try to see the info and it says more o less the following:
Oracle Data Integrator Error
Cannot display table's data.
java.sql.SOLException: [Microsoft][ODBC Excel Driver) The Microsoft Jet database engine cannot open the tile '(unknow)', It is already opened exclusively by another user, or you need permission to view its data.
Has any one faced this issue before?
I assume that it is something with the ODBC, but as far as I know it was all right.
I would really appreacite any ideas on how to solve this issue.
Best regards.
J

Something is reading your file, have you got it open in Excel?
I've had similar issues reading Excel via ODBC with OBIEE - once a process opens it you might find you need to kill whatever it was and restart it.
So its either you or the ODI Agent / Console , try restarting it if its not you.

TS1424 is any else getting a "your purchase cannot be completed error" when purchasing anything on apple tv, or iTunes, or the app store.

I am getting a "your purchase cannot be completed error" when I try to buy something on the app store or itunes. I sent an email to apple on saturday and no one has responded. I haven't had a problem to date buying anything on the app store or itunes. has any else gotten this error?

I have the same issue to. I buy gems frequently for a game that I play, then started getting that message. Frustrating cus the item that I want to buy has a limit on it and i don't want to miss it.
It is my money and I do as I please, and no up to Apple in limitting the amount you can spend.

When starting I get an error: "This operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly. "

Each time I start up Firefox 4.0b6 I am getting the following error message: "This operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly. ". I run Firefox 3.6 as my standard Firefox browser in paralell.

See https://bugzilla.mozilla.org/show_bug.cgi?id=588511
(please do not comment in bug reports)

An FTP error occurred - cannot put [file name.htm]. Dreamweaver encountered an internal data error

I get the message “Server not responding” whenever trying to add files to my web site via DW. The following message appears: "An FTP error occurred - cannot put [file name.htm]. Dreamweaver encountered an internal data error. Please try the operation again."
I called the hosting service provider, and they said they were able to upload a 20 mb document with no problem. I was also able to upload a document using Filezilla.
Therefore, the problem must be with DW.
When I go to Manage Sites and choose my site and get to the Test Connection button, the test is successful, which further confuses the issue.
Any guidance would be greatly appreciated.

Does this help?
http://forums.adobe.com/thread/861606
Also check the log:
http://forums.adobe.com/thread/937231
It is possible it is a host issue but because they use a higher level account to test that they do not see the error.

HT3204 new ipod touch. can access iTunes store. cannot create iTunes ID. get error "could not complete iTunes request. unknown error occured (-1202)".Ipod updated to latest issue,firewall exception allowed.SSL 3.0 & TSL 1.0 ok. Running windows Vista. Help

New ipod touch 32gb. Can access iTune store.Can sample music selection. Completed latest update for ipod Can't make any purchases. Get error "could not complete your iTunes store request. An unknown error occured (-1202)". security SSL 3.0 & TSL 1.0 OK. Firewall enabled for iTunes. ???

laneymenion wrote:
Using Proxy: Yes
HTTP Proxy: 192.168.100.15:80
Change the Using Proxy to No
Have you allowed itunes and itunes helper in your security software firewall?

SharePoint Foundation 2010: search error: "Your search cannot be completed because of a service error."

Hi,
I have SharePoint Foundation 2010 running on a single server with databases, with a second server in the farm serving as a 2nd app tier. Both server have the exact same versions of SharePoint loaded (according to the Central Admin site).
Whenever I try to run a search from any site in my SharePoint Foundation 2010 installation (in this example I typed "this is my query"), it hangs for 20-30 seconds while the IE status bar says:
Waiting for http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2Ftfs2010db%2Ftfs%2FSITE1
Then it finally returns a results screen with an error that says: "Your search cannot be completed because of a service error. Try your search again or contact your administrator for more information."
Checking the SharePoint logs under C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS, the relevant entries say the following (items I deem important
bolded):
11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (HEAD:http://172.22.100.101:80/)) 11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Logging
Correlation Data xmnv Medium Name=Request (HEAD:http://172.22.100.101:80/) a7ab70a3-61bd-4d62-b5a4-cf77a45dafb9
11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (HEAD:http://172.22.100.101:80/)). Execution Time=3.33645756653429 a7ab70a3-61bd-4d62-b5a4-cf77a45dafb9
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1))
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)
fea6cc87-0404-497a-838e-5e154f422aa4
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)).
Execution Time=4.3055751499143 fea6cc87-0404-497a-838e-5e154f422aa4
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1))
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.75 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/tfs/SITE1 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.77 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Query dn6r High FetchDataFromURL start at(outside if): 1 param: start 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.79 mssearch.exe (0x58A4) 0x2534 SharePoint Foundation Search QueryComponentSelection aee7 Medium
Did You Mean Suggester not found. [smart2.hxx:382] d:\office\source\otools\inc\search\common\ytrip\tripoli\smart2.hxx 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.91 mssearch.exe (0x58A4) 0x2534 SharePoint Foundation Search Query Processor e0pg Medium 1dd958fb-b605-4b3b-a676-28a3cafb2eb6:
Query completed 125 ms, detailed time: Query stage execution ms times: 0 125 0 0 125 0 0 0 Query stage cpu ms times: 0 31 0 0 31 0 0 0 Query stage hit counts: 1 1 1 7 1 0 1 1 Cursor count: 260 Mapped page count: 164 Total index count: 7 [srequest.cxx:5526]
d:\office\source\search\native\ytrip\tripoli\cifrmwrk\srequest.cxx 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Exceptions 1hjo
Medium Exception thrown: 0x80040e31 (d:\office\source\otools\inc\search\common\ytrip\tripoli\timeout.hxx:51 ip 0x000007FEECF099B7) 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search
Query Processor e2o1 High In CRootQuerySpec::Execute - caught exception: 0x80040e31, translated to: 0x80040e31 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Administration 0000
High Log Query: More Information: Execution stopped because a resource limit was reached. No results were returned.
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a1
High Error while executing web part: Microsoft.SharePoint.Search.WebControls.Srhdc GenericException: Your search cannot be completed because of a service error. Try your search again or contact your administrator for more information.
---> System.ServiceProcess.TimeoutException: System error. at Microsoft.SharePoint.Search.Query.KeywordQueryInternal.Execute() at Microsoft.SharePoint.Search.Query.QueryInternal.Execute(QueryProperties properties) at Microsoft.SharePoint.Search.Query.Query.Execute()
at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.GetResultData() --- End of inner exception stack trace --- at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.get_ResultsReturned() at Microsoft.SharePoint.Search.Internal.WebControls.CoreRes...
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08* w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a1 High ...ultsWebPart.ModifyXsltArgumentList(ArgumentClassWrapper argList) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean
bDeferExecuteTransform) 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a2
High InnerException 1: System.ServiceProcess.TimeoutException: System error. at Microsoft.SharePoint.Search.Query.KeywordQueryInternal.Execute() at Microsoft.SharePoint.Search.Query.QueryInternal.Execute(QueryProperties properties) at Microsoft.SharePoint.Search.Query.Query.Execute()
at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.GetResultData() 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (DataBinding DataFormWebPart ()). Execution Time=15302.2074034549 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.09 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)).
Execution Time=15358.1002613461 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png))
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png) f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af71 Medium HTTP Request method: GET f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af75 Medium Overridden HTTP request method: GET f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af74 Medium HTTP request URL: /tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.60 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png)). Execution Time=9.75459171486879 f0d03f8e-d78b-4004-9a5f-3ee9955afa60
Not sure what "resource limit is reached" actually means. This SharePoint installation is running under regular SQL 2008 R2, and the
WSS_Content database is fairly small (10gig). I've reviewed the Search Service, the process account running it, the
WSS_SEARCH index database, and verified that the Content database is using the proper index database. Everything looks like it should be crawling/indexing/working fine. But the WSS_SEARCH
database isn't very large, so I'm not sure if the crawling is actually filling it with anything.
Not sure where to start seriously troubleshooting this. Any advice would be appreciated. Thanks.

Hi,
The query ran in tens of seconds. This indicates that at some point a bad plan compiled and stayed in the cache.
It may have gotten there because the statistics were out of date.
A possible way to keep this from happening is to rebuild statistics with full scan more frequently.
Try free the proc cache and see the result.
http://msdn.microsoft.com/en-us/library/ms174283(v=SQL.105).aspx
Thanks,
Rock Wang
Regards, Rock Wang Microsoft Online Community Support

Java.sql.SQLException: Internal error: Cannot obtain XAConnection

Hi,
I am getting this error .
I have a multi data source which serves two Data source and is using load balancing
I get the below error:
Cannot obtain XAConnection weblogic.common.ResourceException: No good connections available.
The complete error trace is below:
GWMDBBean [onMessage(Message)] 09_MAY 16:24:13:165->EXCEPTION
java.sql.SQLException: Internal error: Cannot obtain XAConnection weblogic.common.ResourceException: No good connections available.
     at weblogic.jdbc.common.internal.MultiPool.findPool(MultiPool.java:187)
     at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:87)
     at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:61)
     at weblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:1514)
     at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1301)
     at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:426)
     at weblogic.jdbc.jta.DataSource.connect(DataSource.java:383)
     at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:346)
     at com.iflex.fcubs.gwutil.db.GWDBUtil.getConnection(GWDBUtil.java:119)
     at com.iflex.fcubs.gwservices.db.GWMsgProcessor.getConnection(GWMsgProcessor.java:95)
     at com.iflex.fcubs.gwservices.db.inbound.GWMsgSchemaProc.processMsg(GWMsgSchemaProc.java:165)
     at com.iflex.fcubs.gw.mdb.GWMDBBean.processMessage(GWMDBBean.java:1051)
     at com.iflex.fcubs.gw.mdb.GWMDBBean.onMessage(GWMDBBean.java:371)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
     at weblogic.ejb.container.internal.NewJMSMessagePoller.processOneMessage(NewJMSMessagePoller.java:245)
     at weblogic.ejb.container.internal.NewJMSMessagePoller.run(NewJMSMessagePoller.java:121)
     at weblogic.ejb.container.internal.NewJMSMessagePoller.timerExpired(NewJMSMessagePoller.java:204)
     at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
     at com.iflex.fcubs.gw.mdb.GWMDBBean.processMessage(GWMDBBean.java:1060)
     at com.iflex.fcubs.gw.mdb.GWMDBBean.onMessage(GWMDBBean.java:371)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
     at weblogic.ejb.container.internal.NewJMSMessagePoller.processOneMessage(NewJMSMessagePoller.java:245)
     at weblogic.ejb.container.internal.NewJMSMessagePoller.run(NewJMSMessagePoller.java:121)
     at weblogic.ejb.container.internal.NewJMSMessagePoller.timerExpired(NewJMSMessagePoller.java:204)
     at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The Data Sources Configuration are as below:
<initial-capacity>15</initial-capacity>
<max-capacity>15</max-capacity>

This indicates that none of your datasources have been able to successfully connect to the database.
Please check the connectivity to your database from the datasources.
Also, you can login into the console and check if the connections are good, by doing test connection on the datasource.
http://docs.oracle.com/cd/E21764_01/apirefs.1111/e13952/taskhelp/jdbc/jdbc_datasources/TestDataSources.html
The error you get when you do test connection will help you to understand any connectivity issues.
Arun

Diadem Error: Cannot Store Complete Internal Data

Similar Messages

Maybe you are looking for