Cannot update a field

Hi,
I have a question about updating fields.
I am only doing an update:
Update Standard_SAP_Table
Set Field1
Where Primary_Key = Some_Value
Here is the problem. There are fields in this table where I can set to whatever I want but some fields I cannot change the value. It seems like there is some kind of "make field uneditable" function in ABAP?
Is there such functions? How can I find such functions, and disable them? It may not be such a good idea to disable such functionality (since this is a table created by SAP and they may not want custom functionality to update it) but I want to learn how fields may be prevented from being updated/made updatable again.
Maybe I am suppose to use Badis to update it? Either way, how do you find such "make this field uneditable" settings?
thanks!
//Baran

Hi,
Updates values in a database table. If a WHERE condition is specified, only those records which satisfy the WHERE condition are updated.
Example:
UPDATE sflight SET   seatsocc = seatsocc + 3
               WHERE carrid   = 'LH'   AND
                     connid   = '0400' AND
                     fldate   = '20010228'.
The Return Code is set as follows:
SY-SUBRC = 0:
The specified line has been updated.
SY-SUBRC = 4:
The system could not update any line in the table, since there is no line with the specified primary key.
Note: Update is used to change the non-key-fields of a database table with reference to the WHERE condition.
Trythis,
KC

Similar Messages

FRM _40200: You cannot update this field

How can I get this message to display?? I have a text item which has insert allowed, and update allowed set to false, and if the user tries to update the text item, then I want that message to display, like I have seen on other forms... but it doesn't...
cheers

Hi Paul,
Try getting the warning message , i don't remember FRM-40.... <cannot update field> and using this message warning in ON-ERROR trigger in order to display the message you want...
Or ,
getting the status of the text item (new , updated , changed) and on a trigger such as post-text-item , key-others .... call the message procedure to display the message you want....
Simon

Cannot update new field through SharePoint properties on re-pubished InfoPath form

Hello,
I would truly appreciate any help with this problem. I've searched the forum for answers to this issue, but none of the ones I've found seem to
apply.
We are using SharePoint 2007.
When I re-publish a form with a new field, I am unable to modify that new field through SharePoint properties on older forms. I have tried re-linking the old forms but that does not resolve the issue. I can re-create this problem consistently in new
and old InfoPath form libraries.
Here are the latest steps I have taken to re-create the error:
Created Form Library called Error Testing.
Created new form (from blank template) with three data fields in the data source: name, occupation and address.
Added section and all fields onto the form.
Published form to Error Testing library. All fields were promoted and selected the “Allow users to edit data in this field by using a datasheet or properties page” option.
Created and saved Form 1 in library with no issues.
Opened edit properties and was able to modify and save the content in all three fields.
Added a new field to the form template: City.
Published form to Error Testing library. The original fields, and the new field were promoted and selected the “Allow users to edit data in this field by using a datasheet or properties page”
option.
Created and saved Form 2 in library with no issues.
Opened edit properties in Form 2 and was able to modify and save the content in all three fields.
Opened edit properties in Form 1, modified all fields and got the following message when I tried to save:
"Changes could not be saved into the document. The property to change is read-only for the document's content type, or the document is missing XML elements or attributes where
the changes would be saved. Try editing the document in a Windows SharePoint Services-compatible XML editor such as MicroSoft Office InfoPath."
Modified each field one at a time and determined the field I could not edit and that was causing the error message was
the new City field.
I re-linked Form 1 and got same error message when I tried to modify the City field.
I opened Form 1 entered the city and saved.
The content of the city field appears in the SharePoint column and I am able to edit the content through the Edit Properties field.
This is an issue when we run a workflow that tries to update the new field on an old version of an InfoPath form.

You can certainly add the fields manually by using SharePoint Designer, but a more effective way to Open the form template in "Design Mode" Click "Tools" and then "Form Options" Choose "Versioning".
InfoPath defaults to not Upgrade forms automatically. If different versions are not a historical issue for this solution, then Change the default to "Automatically Upgrade Old Forms". Then republish form... The Next time you open a from in
the library with this content type it will upgrade the old forms in the library.
Have a look at this post on the same topic:
http://social.msdn.microsoft.com/Forums/en-US/cffd3fa0-0a53-4ef2-8c62-0764cbe9f0e2/adding-new-fields-to-existing-infopath-form-template?forum=sharepointcustomizationlegacy

AR Invoice cannot update due date

Have SAP 2005 installed with 5 databases. In 4 of the databases we can update the due date on the AR invoice screen (As long as document status is open). On one of the databases we cannot update the field. Logging in as manager in all databases.
Anyone know what to look for or why this be happening?

No, I have tested for installments and that does not seem to matter. I should have pointed out that one of the databases this DOES NOT work in has a Netherlands localization. Could it be possible that the Netherlands localizations do not allow update of the invoice due date. It appears that this is the case can anyone confirm this?

Update a field multiple times, but only if the field is empty

I am having trouble updating a field in my table based upon a set of 7 different rules. I have been scratching my head at this for a few days, and am not sure what exactly is wrong, but am sure there is something small causing me problems. My current code
is:
BEGIN TRANSACTION
UPDATE MyTable
SET Field1 = 'Value1'
WHERE svc = 'Y' AND Field1 = '' ;
COMMIT TRANSACTION
BEGIN TRANSACTION
UPDATE MyTable
SET Field1 = 'Value2'
WHERE Dlv Is Null AND Cat = 'svc' AND Field1 = '';
COMMIT TRANSACTION
BEGIN TRANSACTION
UPDATE MyTable
SET Field1 = 'Value2'
WHERE (prod LIKE 'ABC%') OR (prod LIKE 'ABB%') AND Field1 = '';
COMMIT TRANSACTION
BEGIN TRANSACTION
UPDATE MyTable
SET Field1 = 'Value3'
WHERE Dlv = 'Elec' AND Field1 = '';
COMMIT TRANSACTION
BEGIN TRANSACTION
UPDATE MyTable
SET Field1 = 'Value4'
WHERE Ord = '0' AND Cat = 'Hdw' OR Cat = 'Bnd' AND Field1 = '';
COMMIT TRANSACTION
BEGIN TRANSACTION
UPDATE MyTable
SET Field1 = 'Value5'
WHERE Ord = '0' AND (NOT (Cat = 'Hdw')) AND (NOT (Cat = 'Bnd')) AND Field1 = '';
COMMIT TRANSACTION
BEGIN TRANSACTION
UPDATE MyTable
SET Field1 = 'Value4'
WHERE (Ind = '1' AND Cat = 'Hdw') OR (Cat = 'Bnd') AND Field1 = '';
COMMIT TRANSACTION
BEGIN TRANSACTION
UPDATE MyTable
SET Field1 = 'Value5'
WHERE (Ind = '1' AND NOT (Cat = 'Hdw')) AND (NOT (Cat = 'Bnd')) AND Field1 = '';
COMMIT TRANSACTION
BEGIN TRANSACTION
UPDATE MyTable
SET Field1 = 'Value6'
WHERE Ind = '0' AND Cat = 'Hdw' OR Cat = 'Bnd' AND Field1 = '';
COMMIT TRANSACTION
BEGIN TRANSACTION
UPDATE MyTable
SET Field1 = 'Value7'
WHERE (Ind = '0' AND NOT (Cat = 'Hdw')) AND (NOT (Cat = 'Bnd')) AND Field1 = '';
COMMIT TRANSACTION
My biggest problem seems to be that between the piece that updates Field1 as either Value4 or Value5 is that something is not right. I initially had this set up in MS Access, and so am using that as a comparison
to check my final values once the field has been udpated. When I run in Access I get a total of 9,802 for Value6 and 14,107 for Value4, yet when I run the SQL code I get 19,548 for Value 6 and 4,478 for Value4.
I also get some differences for the other values, but nowhere near as large of a difference as with the 2 values above. I feel fairly confident that I have something not quite right with my syntax, but I cannot
figure out exactly what it is. Field1 at the beginning of the query is inserted into the table as a blank value.
Thanks.

Combining OR and AND may be tricky, so I think your problem lies here:
UPDATE MyTable
SET Field1 = 'Value4'
WHERE Ord = '0' AND Cat = 'Hdw' OR Cat = 'Bnd' AND Field1 = '';
You can change this to
UPDATE MyTable
SET Field1 = 'Value4'
WHERE (Ord ='0' AND Cat IN ('Hdw','Bnd')) AND Field1 = '';
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Error while updating Date Field on Process Form.

Hi,
I am using java code to pre-pop date on the process form.First I used a java code whic took java.sql.date as input and returned the same java.sql.date.But it gave an error that:java.lang.String cannot be converted to java.sql.date.......
So I changed the java code and now it takes string as input and returns java.sql.date. This code works fine for Pre-pop adapter and the date is populated on the process form.
But when i use the same code in a Process Task adapter to update the date, then it gives the following error:
ERROR [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.ADAPTERS - Class/Method: tcAdpEvent/updateDataSetValuePost encounter some problems: Adapter Execution Error: updateDataObjFieldValuePost: error updating UD_OID_USR_DATE_OF_BIRTH
ERROR [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.ADAPTERS - Class/Method: tcAdpEvent/updateDataSetValuePost encounter some problems: {1}
Can anyone suggest any method to update date field on process form?

Hi Abhi,
Can you tell me how you have implemented populating an UDF based on Prepopulation of another UDF. I have a similar kind of requirement. It would be great if you share your code or relevant part of it.
Regards,
Sunny Ajmera

Error while querying - You cannot update this record

Hi all,
I have a builded a form and was successful when i enter the data. But when i query the form it is showing me the error FRM-14050 YOU CANNOT UPDATE THIS RECORD.
I have pre-insert, pre-update and pre-query triggers at block level.
In PRE_INSERT iam setting the property to insert allowed and true.
same way for pre-update and pre-query.
Can any one guide me.
Thanks
Sunil

Hi
check your fields name name and match with database fields.
vikas

Months later and I still cannot update to IOS 5.1!!!

You name it, Ive tried it. Done all the different trouble shooting bits and bobs, ie uninstalled security, itunes reinstalled ,disabled apple mobile, used a different pc, etc yet still i cannot update my ipad?
I even ventured to my local Apple store and the assistant had the same problem and couldn't help me either!
Is it only my Ipad having this problem? Why can't the Apple people see this device either??
Apart from throwing the thing in the bin does anyone else have any suggestions of what I can do that might work please?
Hoping someone will suggest something that I haven't already tried and will work.
Thanks in hopeful anticipation but i'm not holding my breath........!
Thank you..
Below I have pasted the last thing I tried that still didnt work...
From the Start menu, click All Programs and click Accessories.
Click Run. A Run window (command prompt) appears.
Type msconfig in the Open field and click OK.
If Windows needs your permission to continue, click Continue. The System Configuration Utility opens.
Click the General tab.
Select the "Selective Startup" option.
Deselect the "Load Startup Items" checkbox.
Note: This step requires disabling third-party System Services and Startup Items, which can prevent some software or OEM hardware on your computer from working correctly. For example, this can affect the CD/DVD control buttons on portable computers or prevent wireless keyboards and mice from functioning. This is only required during troubleshooting to help isolate third-party conflicts with Apple software.
Click the Startup tab.
Select the "iTunes" and "QuickTime" checkboxes in the list.
Click the Services tab.
Make sure that "Hide All Microsoft Services" is selected.
Click Disable All.
Note: If you are troubleshooting an issue related to iPad, iPhone, or iPod touch, select the Apple Mobile Device checkbox.
Click OK.
Click Restart. After restarting (and logging in to Windows), a message may appear stating that Windows has blocked startup programs and indicates the Blocked startup programs icon in the notification area (far right) of the taskbar. Click the message.
Click the Blocked startup programs icon, select Run blocked program and select System Configuration Utility.
If Windows needs your permission to continue, click Continue. A window appears confirming that "You have used the System Configuration Utility to make changes to the way Windows starts." Click OK. The System Configuration Utility appears. Do not click OK here as this will prompt you to restart again. First try to reproduce the issue you were having.
If following these steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one or a few at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict. You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to recur.
Additional Information
If the issue is still occurring with Selective Startup mode, third-party security software may still be operating regardless of the state of Msconfig. Follow iTunes for Windows: Troubleshooting security software issues.
Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple’s recommendation or endorsement. Please contact the vendor for additional information.
Rate this article:
Not helpful Somewhat helpful Helpful Very helpful Solved my problem

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Doubt on updating PROJN field in EKKN

Hi Friends,
I have a requirement to update the PROJN(old pos number) field in EKKN table with some shipment date from input file.
i have checked with BAPI_PO_CHANGE for updation.
I cannot accurately find a specific field where i need to update for PROJN in that BAPI.
Actually the PROJN field is not in use now.
Can anybody help me with which field in ME22N denotes the PROJN field.
Is there any ways to update an non-existing field with some other field.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo

As the field is no longer used I doubt if there is a bapi or other object that allows you to update the field. Even if there was a bapi then support for updating that field could be withdrawn in the future. To be safe you should look at using another field. If you get replies telling you to directly update ekkn-projn then ignore them, thats silly.

Hz_party_site_v2pub.update_party_site-You cannot update column location_id

Hi All,
I am working on customer conversion and need to call hz_party_site_v2pub.update_party_site. It throws me error "You cannot update column location_id".
Follwoing is the scenario:
1. Initially, I create a customer, with bill to and ship to addresses different from each other.
New Customer: 12345678
Bill To: 1 ADDRESS
Ship To: 2 ADDRESS
Result:
1 customer got created.
2 sites got created one for bill to and one for ship to.
2 Locations got created , one for bill to and one for ship to address.
2. Now, I try to update the bill to and ship to address for the customer and my new bill to ship to are
Bill To : 1 ADDRESS
Ship To: 1 ADDRESS
Now, when the code hits the point hz_party_site_v2pub.update_party_site() it returns the error message "You cannot update column location_id".
Any pointer to resolve the issue or throw some light on the situation would be of great help.
Thanks in Advance !
Lalitha.

Hi,
Please see if (How to Update an addressee Field Information using TCA API [ID 219595.1]) helps.
Thanks,
Hussein

Error message " You cannot Update an Expired Instance. Instance needs to be

Hi,
I am trying to update Insatll base records in csi_item_instance table( like updating system_id value) by calling API csi_item_instance_pub.update_item_instance. I am getting error message " You cannot Update an Expired Instance. Instance needs to be un-expired before any updates". But actually instance is not expired and active_end_date field is null and instance_status_id=3(Latest).I am getting this error message for only some records.but for these records also x_return_status = S.
Please suggest what could be the reason.
Thanks in advance.

It took quite a while to find this:
Dear xy,
Thank you for purchasing “Inside Apple”. A new version of the book is available to you at no charge.
Here is how to download the new version:
1) Tap the iBooks app on your iPad, iPhone or iPod touch. If you are already in the iBookstore, tap on “Library”.
2) Tap the “Edit” button.
3) Locate “Inside Apple”, tap “Edit” and then “Delete” to delete the book.
4) Tap the “Done” button.
5) Tap the “Store” button, scroll down to the bottom of the page and sign out of your account.
6) The page will refresh. Scroll down to the bottom of the page and sign back in to your account.
7) If you are not already in the “Purchases” page, tap the “Purchases” icon at the bottom right corner of your screen.
8) Locate “Inside Apple” in your purchases and tap the “Redownload” button.
You will now have the updated version of the iBook in your library. Thank you for being a loyal Apple customer and have a great day!
Sincerely,
iTunes Store Team

Cannot update 'last_update' column, please help

I want to add a column 'last_update' in all tables in database, then add a tigger to update 'last_update' timestamp after the row is updated. However, tigger cannot allow me to update 'last_update' field on updating row. The error is ORA-04091 means table is mutating. How can I solve the problem ?

according to your reference, my trigger is as below:
CREATE OR REPLACE TRIGGER lastudt
After UPDATE ON test
FOR EACH ROW
BEGIN
:new.lastupdate:=sysdate ;
END;
but, i got
ERROR at line 1:
ORA-04084: cannot change NEW values for this trigger type

How to update specific fields of a db table using MODIFY

Hi all.
I understand that MODIFY allows us to insert a record into the database if the a record with the same key is not there. If a record is there, it would update that record.
However, when the record is there, could i update SPECIFIC fields of the record, instead of updating ALL fields of the record?

Yes, you can with exception that you can not modify primary key values.
Here are the details about MODIFY db table command with examples
MODIFY - Change a database table
Variants:
MODIFY dbtab. or   MODIFY *dbtab. or
MODIFY (dbtabname) ... .
MODIFY dbtab FROM TABLE itab. or   MODIFY (dbtabname) FROM TABLE itab.
MODIFY dbtab VERSION vers. or   MODIFY *dbtab VERSION vers.
Effect
Inserts new lines or updates existing lines in a database table (s. relational database). If a line with the specified primary key already exists, an UPDATE is executed. Otherwise, an INSERT is performed. You can specify the name of the database table either in the program itself in the form MODIFY dbtab ... or at runtime as the contents of the field dbtabname in the form MODIFY (dbtabname) ... . In both cases, the database table must be defined in the ABAP Dictionary. If the program contains the name of the database table, it must also have a corresponding TABLES statement. Normally, records are inserted or updated only in the current client. Data can only be inserted or updated using a view, if the view refers to a single table and was created in the ABAP Dictionary with the maintenance status "No restriction".
MODIFY belongs to the Open SQL command set.
When the statement has been executed, the system field SY-DBCNT contains the number of edited lines.
The Return code is set as follows:
SY-SUBRC = 0:
    All lines were successfully inserted or updated.
SY-SUBRC = 4:
    One or more lines could not be inserted or updated.
Notes
   1. You cannot modify a line if there is already a line in the table with identical key field values in a UNIQUE index.
   2. Automatic definition of INSERT and UPDATE is expensive. You should therefore use MODIFY only if you cannot define the INSERT and UPDATE cases yourself in the program.
   3. Since the MODIFY statement does not perform authority checks, you have to program them yourself.
   4. Adding or changing lines with the MODIFY command is only completed after a database commit (see LUW) has been performed. Before the database commit has been performed, any database changes can be reversed with a database rollback (see Programming transactions).
   5. Synchronization of simultanous accesses by several users to the same set of data cannot be exclusively achieved with the lock mechanism of the database system. In several cases, you are recommended to use the SAP lock mechanism.
Variant 1
MODIFY dbtab. or
MODIFY *dbtab. or
MODIFY (dbtabname) ... .
Extras:
... FROM wa
... CLIENT SPECIFIED
See Cannot Use Short Forms and
Cannot Use *Work Areas.
Effect
Inserts a new line or updates an existing line in a database table. If you specify the name of the database table yourself, the primary key for identifying the line to be inserted or updated and the relevant values are taken from the table work area dbtab or *dbtab (see TABLES). If you declare the name of the database table explicitly, the program must also contain a corresponding TABLES statement. If the name of the database table is not determined until runtime, you need to use the addition ... FROM wa.
Example
Insert or change data of the customer Robinson in the current client:
TABLES SCUSTOM.
SCUSTOM-ID        = '12400177'.
SCUSTOM-NAME      = 'Robinson'.
SCUSTOM-POSTCODE = '69542'.
SCUSTOM-CITY      = 'Heidelberg'.
SCUSTOM-CUSTTYPE = 'P'.
SCUSTOM-DISCOUNT = '003'.
SCUSTOM-TELEPHONE = '06201/44889'.
MODIFY SCUSTOM.
Addition 1
... FROM wa
Effect
The values for the line to be inserted or updated are not taken from the table work area dbtab, but from the explicitly specified work area wa. When doing this, the data is read from left to right according to the structure of the table work area dbtab (see TABLES). Since the structure of wa is not taken into account, the work area wa must be at least as wide (see DATA) as the table work area dbtab and the alignment of the work area wa must correspond to the alignment of the table work area. Otherwise, a runtime error occurs.
Note
If a work area is not explicitly specified, the values for the line to be inserted or updated are also taken from the table work area dbtab if the statement is in a FORM or FUNCTION where the table work area is stored in a formal parameter or local variable of the same name.
Addition 2
... CLIENT SPECIFIED
Effect
Switches off automatic client handling. This allows you to edit data across all clients even when dealing with client-specific tables. The client field is treated like a normal table field that can be programmed to accept values in the table work area dbtab or *dbtab where the line to be edited occurs.
The addition CLIENT SPECIFIED must be specified immediately after the name of the database table.
Variant 2
MODIFY dbtab FROM TABLE itab.or
MODIFY (dbtabname) FROM TABLE itab.
Addition:
... CLIENT SPECIFIED
Effect
Mass modify: Inserts new lines or updates existing lines of a database table. The primary keys for identifying the lines to be inserted or updated and the relevant values are taken from the internal table itab. The lines of the internal table itab must satisfy the same conditions as the work area wa in addition 1 to variant 1.
Note
If the internal table itab is empty, SY-SUBRC and SY-DBCNT are set to 0.
Addition
... CLIENT SPECIFIED
Effect
As for variant 1.
Variant 3
MODIFY dbtab VERSION vers. or
MODIFY *dbtab VERSION vers.
See Cannot Use the VERSION Addition.
Note
This variant is obsolete.
Effect
Inserts a new line or updates an existing line in a database table, the name of which is taken from the field vers at runtime. If no line exists with the specified primary key, an INSERT is executed. Otherwise, an UPDATE is performed. The database table must be defined in the ABAP/4 Dictionary and its name must conform to the naming conventions for R/2 ATAB tables. These stipulate that the name must begin with 'T' and may contain up to four further characters. The field vers must contain the table name without the leading 'T'. Only lines in the current client are inserted or updated. The line to be inserted is taken from the statically specified table work area dbtab or *dbtab.
SY-SUBRC is set to 0 if the line is successfully inserted or updated. SY-SUBRC <> 0 is not possible since any other result causes a runtime error.
Hope this helps.
ashish

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

Getting a permission error while updating a field.

hi,
I want to update a field in OIM and push the same to OID. When i try to update it for like 20 times it woks for 18 times and doesnt work for couple of times. I check the log and i get the below error.....
*Caused by: javax.ejb.AccessLocalException: [EJB:010160]Security Violation: User: 'xelsysadm' has insufficient permission to a*
ccess EJB: type=<ejb>, application=Xellerate, module=xlDataObjectBeans.jar, ejb=tcLookupOperations, method=create, methodInte
rface=LocalHome, signature={}.
at weblogic.ejb.container.internal.MethodDescriptor.checkMethodPermissionsLocal(MethodDescriptor.java:573)
at weblogic.ejb.container.internal.StatelessEJBLocalHome.create(StatelessEJBLocalHome.java:60)
at com.thortech.xl.ejb.beans.tcLookupOperations_u50o5o_LocalHomeImpl.create(tcLookupOperations_u50o5o_LocalHomeImpl.j
ava:70)
Kindly help me to fix this.
Thanks
thilak

http://bbs.archlinux.org/viewtopic.php?id=83076

Cannot update a field

Similar Messages

Maybe you are looking for