Cannot use SAP HANA Studio with SAP HANA One Instance

Hello together,
i try to make some tests in the SAP HANA environment. But i got the following error message each time:
An internal error occurred during: "Updating system 'HDB' ...".
java.lang.NullPointerException
at com.sap.ndb.studio.datamodel.manager.SAPSystemState.isThereAtLeastOneIndexserverProcessWithStateColor(SAPSystemState.java:44)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:76)
at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:70)
at com.sap.ndb.studio.datamodel.controler.DataModelOperationJob.run(DataModelOperationJob.java:70)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
I often read about different SAP HANA One and SAP HANA Studio versions.
Following information about the versions:
Studio: Version: 1.0.52
Hana One Instance 52.1
What could be the reason for getting this error message? I hope you can help me.
Thanks in advance.
CT

Hi Nicky,
As per my knowledge, there is no separate licensing required for HANA studio. License for HANA d/b or Enterprise HANA license is sufficient.
Installation of HANA studio will not ask for any licenses.
Regards,
Suma

Similar Messages

Connect SAP HANA Studio with SAP HANA One Instance Reg 70

Hello,
i have already create an instance and set all passworts in Management One Console.
If i want to add a new system in Hana studio a got an error message: "Database connection is not available"
SAPControl request failed. Cannot retrieve JDBC connection for: ...
com.sap.ndb.studio.jdbc.JDBCConnectionStatus: Database connection is not available. See error log for more details.
at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:295)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:238)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:84)
at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:70)
at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:67)
at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sap://xxx.eu-west-1.compute.amazonaws.com:30015 [Cannot connect to host exxx4.eu-west-1.compute.amazonaws.com:30015 [Connection timed out: connect], -813.].
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:219)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:203)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateDatabaseException(SQLExceptionSapDB.java:186)
at com.sap.db.jdbc.Driver.connect(Driver.java:238)
at com.sap.ndb.studio.jdbc.JDBCPlugin$3.run(JDBCPlugin.java:590)
I must add, that i test it in the firm's intranet. So we have diverse firewalls. What firewall settings has our IT department change, for enabling the database connection?
Hope you can help me.
CT

Not related to UI Development Toolkit for HTML Developer Center. Moved to SAP HANA Developer Center community.
Regards, Mike (Moderator)

Message "Failed to create Java Virtual Machine" while installing HANA Studio with SP08

Installing HANA Studio with SP08 but getting error as follows:
HANA Version
Errors:
System Info : Win7(32 bit ), 2GB RAM, 500GB HDD

Not same case but related with Java: 32Bit VI Java Virtual Machine error
In this discussion Hanry Banks answers as follows:
1. Did you install using "Run As Administrator"?
2. In your Advanced System Properties, Go to Environment Variables > System Variables
Look for the 'Path' variable. It should include the following values: C:\Program Files\Java\jre6\bin
In the same area, look for the 'JAVA_HOME' variable. It should point to C:\Program Files\Java\jre6
- Can you confirm?
3. Also go Control Panel > Java > Java Control Panel > Java tab > View > User > Path. It should point to C:\Program Files\Java\jre6\bin\javaw.exe .
- How does it look for you?
How much memory is available on your machine as you launch? Go to: Task manager > Performance > Physical Memory > Available (MB)

How to get web application to use Tuscany without conflicting with SAP SDO

Hi,
We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO. As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
common-2.2.3.jar
ecore-2.2.3.jar
ecore-change-2.2.3.jar
ecore-xmi-2.2.3.jar
tuscany-sdo-impl-1.1.1.jar
tuscany-sdo-lib-1.1.1.jar
tuscany-sdo-tools-1.1.1.jar
xsd-2.2.3.jar
We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
However, when we try to run the web application, the following error is logged: java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?

I took a look at the "printerReady" example. Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
Any ideas on how to find the MAC address associated with the IP addresses that respond?
We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
I'll try the InetPing to see how it works,
Kirk

Integrate 'External non-SAP Purchasing Application' with SAP SD for third party purchasing/ drop shipping?

What is the best way to integrate 'External non-SAP Purchasing Application' with SAP SD for third party purchasing/ drop shipping?
Details about expected process Flow.
Receive PO from customer into SAP > SAP SD creates Sales Order > ?? SAP Integrate with External non-SAP Purchasing Application to trigger purchasing > External non-SAP Purchasing Application creates PO, Ships Material to Customer Ship to address (drop ship), Sends Shipping confirmation (FCR) & Invoices to SAP> ??Receive FCR and Invoice in SAP > ?? Initiate SAP Accounts Payable (Vendor Payments) and Accounts Receivable (Customer Invoice) > ?? Update SAP SD Sales Order with shipping status>
Questions we need to answer;
- How to achieve '??' steps from above process.
- What type of Master Data we will need to configure (Say Materials Item Category, Type etc.)
- Any standards options to configure SAP SD (Type of Sales Order)
- We certainly don’t want to trigger SAP MM Purchasing (i.e. PR, PO etc.). How can we bypass it.
- How to make statistical receipts against sales order line items so that SO status will be updated.
- How to receive Invoice and FCR from External non-SAP app to trigger AP and AR transactions.
- Are there any SAP standard configurations/ BAPIs/ BADIs available to achieve this integration.
Any inputs on above questions are appreciable.
Anand.

This question is resolved. We ended up activating purchasing module and used purchasing documents PR/ PO to integrate with third party purchasing system.
Anand.

I get the message "You cannot use the application "AdobeApplicationManager" with Mac OS X

I get the message "You cannot use the application "AdobeApplicationManager" with Mac OS X

Hi LegallyArmedAm,
Are you still getting the message?
-Dave

Cannot use the application "Safari" with Leopard

When I try to open Safari in my non-admin account I get an error message reading 'You cannot use the application "Safari" with this version of Mac OS X'.
Bizarrely, if I logon as the admin account it works perfectly.
I have repaired permissions, run software update, repaired permissions again, logged in as SU and fscked and still the same thing. I discovered that Omni Outliner would open the plist but I don't have the knowledge to interpret that.
I think I have used Safari on this laptop since upgrading to Leopard. Most of the time I use Firefox so it hasn't been an issue anyway. The really bizarre thing is it works normally in the admin account.
All suggestions welcome.

Thanks for that. Tried it to no avail
I have found out what has gone wrong but I have no idea how.
I keep all my browsers in a subfolder of the applications folder. I trashed Safari with the intention of downloading a clean version from the Apple website. When I got there I couldn't find a version for OS X (there may be one, it just isn't obvious). So I thought I'd just try Safari one more time from my admin account. Of course the app wasn't in the browser folder. So I went to put it back in the applications folder with the intention of moving it from there to the browsers subfolder.
But no. There was already a newer version in the applications folder. How did it get there? I have no idea. But it opens. So I've moved it to the browsers subfolder and it still works.
So problem solved. I don't understand how it happened. And especially why it worked all along in the admin account.
Thanks to everyone who suggested solutions.

"YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X"

hi, just downloaded the update for mac 10.5.1 - all went well - then tried to open Safari and received this message "YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X" - I have tried downloading Safari again through netscape but that does not seem to work either - ANY IDEAS???? Thanks

It sounds likely that you have more than one copy of Safari on your hard drive. The one in your Applications folder is the one you should have. The one you're trying to launch is an older version that somehow got moved somewhere else, so that the new version got installed in your Applications folder (where it should be) while the old version is running (or trying to run) from another location.
First, double-click on the Safari application file that you have in your Applications folder. Does it run properly, without error messages? If so, everything is fine. You just need to get rid of the old version of Safari and set it up so you can easily launch the new version that is in your Applications folder.
Are you clicking on the Safari icon in your Dock when you see the error message? If so, do this: Control-click on the Safari icon in your Dock and select "Show in Finder" from the contextual menu. A Finder window should open showing the location of that copy of Safari. If that Finder window is any location other than the Applications folder, delete the Safari file that is in that folder. Then drag the Safari icon out of your Dock. Navigate to your Applications folder and drag the Safari file from the Applications folder to your Dock.
You should be all set, but click on the new Safari icon in your Dock to make sure it is the correct version and runs without problems.
Message was edited by: Rachel R

" You cannot use the application "iTunes" with this version of MAC OS X."

I am getting the response " You cannot use the application "iTunes" with this version of MAC OS X." How do i get Itunes on my Mac. I tried to download the newest version but it won't let me do that either.

What operating system version are you using on your Macbook? If you are still using Tiger 10.4 the new iTunes requires Leopard (10.5) or higher.

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 which works on OS X 10.4 from http://www.mozilla.com/en-US/firefox/all-older.html

My ipod nano gen 4 is stolen! He is my first love with ipod. Can I lock this device by use serial number of the device? I don't want any bad guys use or do anything with my love one. Please let me know if have the way to do thanks.

My ipod nano gen 4 is stolen! He is my first love with ipod. Can I lock this device by use serial number of the device? I don't want any bad guys use or do anything with my love one. Please let me know if have the way to do thanks.

zenith_nm wrote:
My ipod nano gen 4 is stolen! He is my first love with ipod. Can I lock this device by use serial number of the device? I don't want any bad guys use or do anything with my love one. Please let me know if have the way to do thanks.
Nope!
http://support.apple.com/kb/HT2526 How to report lost or stolen Apple product

SAP Developer Studio with no Portal Application option

Hello everyone, can someone help me in this problem:
I have installed these days the SAP Enterprise Portal 6.0 SP 7 on Web AS 6.40 and additionally after that I installed for development the SAP Netweaver Developer Studio the version 2.0.3.
I deployed with SDM those 2 files of PDK 6.0 SP6 in .sda format and add the Java developer role to my admin. I've downloaded from the portal the plugin Connector for Eclipse and copy it in the IDE plugins directory. I made a download in a local directory of the jar files too.
Starting the Developer Studio with the reason of developing, I can't see in my File-> New ->Project any option like Portal Applications. Not in Windows -> Preferences either.
Have I done something wrong? If someone had the same problem maybe and want to give a little help.
I'm thinking now that maybe the version of Developer Studio is too old. If so, does anyone can tell me from where I can download a newer one, because I have seen some links that dont work.
Thanks,
Best Regards.

Hi,
your version of DevStudio seems indeed to be outdated. If I remember correctly, then EP6 SP7 runs on WebAS 640 SP8? Therefore you should use DevStudio 2.0.8 (where .8 denotes the support package of your WebAS installation)
You can download a newer version of DevStudio from service marketplace. A trial version of DevStudio 2.0.7 is available here on SDN in the "Downloads/WebAS" section.

Using CR and Xcelsius with SAP BW - what is the minimal installation?

Hi,
If this question is allready asked and answered several times i appologize.. but I'm having a hard time finding the correct information.
Our situation is that we run an SAP ERP and SAP BW solution with a federated SAP Enterprise Portal on top. The users require more graphical solutions for both static reporting and dynamic dashboards. So we want to use Crystal Reports and Xcelsius to provide frontend interface, but we want to do as little as possible backend, i.e avoid installing a full BO server with roles etc.
I appriciate that we need SAP NW EhP 1 SPS 5 to load data directly into Xcelsius and the BO integration kit transports have to be loaded into the BW system for full CR connectivity.
The problem that I'm having a hard time finding anwsers to is if this setup is capable of storing and and distributing the CR reports and dashboards to endusers? Can CR reports be stored on the BW server? Or can the CR reports and the dashboards be stored in the KW part of the portal?
Another partly related question, what desktop tool does the enduser need to run CR reports that updates with data from the BW server?
Alot of customers will have an SAP environment without any BO server/tools. Naturally we want to change as little as possible. A guide to what is needed for each BO BI tool to be implemented on SAP BW would be appriciated.

Hi
for the CR reports you need a BO Enterprise (or BO Edge) installation. The access to the BOBJ server is done transparently for your SAP BW users (they are able to start their reports in SAP GUI) but the reports are not stored on the SAP system rather in the BO repository.
Regards,
Stratos

Configure Sap NetWeaver MDM with Sap Netweaver XI

SAP NetWeaver MDM communicates with SAP NetWeaver XI by writing an XML file into a directory on a file server.
Can someone gives me an idea about the path of this file server? How can I configure it?

Hi Stan,
In addition to that Harrison told you,if you want automatic syndication of records ,then you must have to use syndication server.In case of syndication server the path of output file is always fixed and you cannot configure it.Path will be as follows:-
<b>
SAP MDM Root Directory\Server\Distributions\<server name> \ <Database instance name>\<Repository name>\Outbound\<client System code>\<Output Port Code> \Ready\</b>
If u want scheduled syndication of records(i.e. in batch mode) ,then u can use syndicator batch.And for manual syndication ,use syndicator .Both of these components will syndicate file where ever u want/specify on the file system.
For more details about syndicator batch
<a href="http://help.sap.com/saphelp_mdmgds55/helpdata/en/a4/21c4a4f6a247b1940fc8bf1cf41f65/frameset.htm">Click here</a>
Hope it will help you.Let me know the results.
Thanks,
<b>Shiv Prashant Dixit</b>

SAP Sourcing 7.0 integration with SAP ERP - issue with SAP PI

Hi All,
We are integrating SAP Sourcing 7.0 with SAP ERP 6.0 with SAP PI 7.1 in middle. So the Sourcing will talk to PI and this intern will talk to ERP. Sourcing is on oracle 11g where as PI and ERP are on SQL 2008. All these 3 are on windows 2003 x64.
We are following the "Configuration Guide Integration of SAP ERP and SAP Sourcing 7.0" provided by SAP.
We have successfully configured Sourcing and PI systems as pe the document. In Sourcing, by using background jobs we are able to successfully generate files in "export" folder which is part of FTP directory.
However the issue is with PI, we configured the "configuration scenerio" in Integration builder and point all channels to the FTP folder in Sourcing. But PI is not picking up these files.
Is there any way to trigger this in PI system. Or do we need to do anything in sourcing itself.
Regards,
Siva.

Hello Siva,
I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
Let's see what other experts suggest.
Thanks,
Siva Kumar

Cannot use SAP HANA Studio with SAP HANA One Instance

Similar Messages

Maybe you are looking for