Cannot view virtual service from host

Hi,
Apologies for posting this here, I could not find a more appropriate forum and I am desperate and this is the nearest fit.
I have an Oracle VirtualBox which is running various web services for BI - see => SmartView: Cannot Connect to Provider for more
I am trying to use one of these services in the machine that is hosting the VM.
My network is bridged.
However I cannot connect to it via the ultimate consumer (excel add in), via browser or via telnet.
I can ping my vm successfully from the host.
I have successfully mounted a directory which I use to transfer files in and out of the VM instance.
I have tried to check the firewall settings in virtualbox but when I do so nothing launches - I have the password correct as I have tried wrong passwords and I am reprompted in this case, so I am confident that I am not forgetting my route password.
Can anyone tell me a simple method that I can use to open ALL of the ports in VM to the host p.c., or even to open ports on a selective basis - without being able to launch my firewall normally - it is linux OS on one of the pre-created Oracle BI builds.
thanks for any light you can shed on this,
Robert.

Hi Arun,
Thanks for your prompt reply..
Yes, correct i have given join condition to ODS and Infocube..
save, check, & activated ...without errors perfect..
I formed query and checked also.....no data available...
What will be problem..not only this infoset...all infoset which already available also....
Explain me..Y>

Similar Messages

  • Cannot Open Topology Services from client

    Hi, I'm using LMS 3.2 and I can open the topology services from LMS server itself.
    This LMS didn't use a DNS resolution
    I can telnet from my laptop to port 42342 and  43242 using the LMS IP Address and Hostname, But unfortunately I still  cannot open Topology Services from my laptop.
    I already disable AV at my laptop and Ciscowork Server.
    Looking forward for your advice.

    I would suggest you need to check again for hostname issues;
    1) check the hostname of the LMS server with the command "hostname" in a DOS box of the server
    2) from the client try to telnet to the ports 42342 and 43242 using the hostname from step 1); like this in a DOS box on the client:
        telnet yourlmsServer 42342
    3) check the entry of PX_HOST in the file
        NMSROOT\lib\classpath\md.properties
        (NMSROOT is your installation path; windows default: C:\Program Files\CSCOpx)
    if the value of PX_HOST is different form the one in step 1) test if the mentioned ports are available using this name
    4) if you cannot establish a connection with one of the names you have to fix this issue by either adding a DNS entry or adding the names to the clients hosts file

  • I cannot view/sync albums from iPhoto on my iPhone whilst iCloud photo library is on. Why? and is there a way of doing it.

    I cannot view/sync albums from iPhoto on my iPhone whilst iCloud photo library (beta) is on. Why? and is there a way of doing it. It is especially frustrating given I have subscribed to more space yet I have to turn it off to view!

    I found the answer in another discussion group, so I have just erased everything through settings on my new iphone and in Backups on itunes, I have clicked on restore back up. So it appears to be working.

  • I cannot view images imported from nikon d4

    i cannot view images imported from nikon d4.
    I have just upgraded to the most current version of aperture and when I import images from my qxd card it looks like it is importing but no images show up.

    So the images show up in the Import pane of Aperture but after you press the Import button they do not show in the project you are importing into?
    Does this happen for both Raw and JPG images?

  • Cannot ping for either from host to guest nor from guest to host

    Hi I have installed virtual box 4.1.20 r80170
    my host os is centos 6.3 64 bit
    my guest os is oracle linux 5.8 64 bit
    I've using bridge adapter for the network settings, but I'm neither able to ping
    from host to guest
    from guest to host
    may I know what's wrong?
    how should I trouble shoot this?
    my host os network configurations is as follow:
    [oracle@localhost ~]$ /sbin/ifconfig
    eth0 Link encap:Ethernet HWaddr E8:E0:B7:D2:F9:54
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:20 Memory:c4800000-c4820000
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:3488 errors:0 dropped:0 overruns:0 frame:0
    TX packets:3488 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:320590 (313.0 KiB) TX bytes:320590 (313.0 KiB)
    wlan0 Link encap:Ethernet HWaddr 9C:B7:0D:96:F4:DF
    inet addr:192.168.0.199 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fe80::9eb7:dff:fe96:f4df/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:22932 errors:0 dropped:0 overruns:0 frame:0
    TX packets:22068 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:15525818 (14.8 MiB) TX bytes:5127595 (4.8 MiB)
    I'm using wlan0 on the host os
    my eth0 configurations on the guest os is as follow:
    #Intel Corporation 82540EM Gigabit Ethernet Controller
    DEVICE=etho0
    BOOTPROTO=static
    HWADDR:08:00:27:08:19:50
    ONBOOT:yes
    DHCPHOSTNAME=source.localdomain
    IPADDR=192.168.0.11
    NETMASK-192.168.0.1
    TYPE=Ethernet
    USERCTRL=no
    IPV6INIT=no
    PEERDNS=yes
    I've a router to connect to the Internet. It is dlink DIR-615
    I've done a dmesg while pinging from guest to host here's the partial output:
    spurious NAK ON isa0060/serio0
    some program might be trying to acces hardware directly
    e100:eth0 NIC link is up 1000 Mbp
    Full Duplex, Flow Control: RX
    ADDRCONF (NETDEV_UP) eth0: link is not ready
    ADDRCONF (NETDEV_CHANGE): eth0 becomes ready
    eth0: no IPv6 routes present
    Any assistance is deeply appreciated!
    thanks a lot!
    Edited by: oraclewannabe2 on Aug 25, 2012 11:28 AM
    Edited by: oraclewannabe2 on Aug 25, 2012 12:10 PM

    Hi ,
    This is OL 6.
    Now,after doing guestadditions this is working fine altough I am not sure what exactly guest addition is.
    Additionally,I installed firefox in same VM but when I click on firefox then nothing comes up.
    Best regards,
    Vishal

  • Most recent RAW update, New Aperture and Maverick but still Aperture cannot view RAW files from my Sony RX-100 camera.

    I have all the most recent Software updates and a brand new version of Aperture but when I connect my Sony RX-100 to my MBP, Aperture cannot view or import the RAW files. It will import JPEG format. I am new to Aperture and would appreciate some advice here. Do I need an old RAW format update or is there something else I need to do here.
    Thanks for any help.

    Keith, the latest raw support claims to have fixed issues with the RX-100 raw support:
    Digital Camera RAW Compatibility Update 5.03This update adds RAW image compatibility for additional cameras to Aperture 3 and iPhoto '11. Jan 16, 2014
    This update adds RAW image compatibility for the following camera to Aperture 3 and iPhoto '11:
    Canon EOS M2
    It also includes fixes that:
    Resolve an issue that prevented lens correction from working properly with Sony Cyber-shot DSC-RX100 images
    Address a color cast issue on some Olympus OM-D E-M1 images
    The RX-100 has been supported since earlier, but the previous raw support has introduced a bug.
    itunesisbullshitplopcrapshould update the raw support. 
    This requires Aperture 3.5. and Mavericks.
    Correction: This requires
    System Requirements
    OS X 10.8.5 w/ iPhoto 9.4.3 or Aperture 9.4.5
    OS X 10.9 w/ iPhoto 9.4.3 or Aperture 9.4.5

  • Cannot Start Workflow Service from Service Manager

    Hello Professionals,
    I have a problem with starting Workflow service from Service manager,
    I have configured all the settings and connection to database was successful.
    However, after closing the settings window and try to start the workflow service, i got "Cannot start Service; configuration is not correct or cannot connect to database"
    What may cause this issue?
    Thanks and Best Regards,

    Hi,
    Please check SAP note:
    2019304 - Workflow server connection stops if many workflow
    instances with script tasks run simultaneously
    Thanks & Regards,
    Nagarajan

  • Cannot access Portal Service from Web dynpro DC

    Hi all,
    I cannot access the portal service from my web dynpro dc.
    1. I created a Portal Service (say xxxservice) in a DC (say the DC name is testservice and the vendor is xx.com)
    2. Created a public part under the testservice DC and added my classes to it.
    3. Built and deployed the testservice DC.
    Now,
    4. I created a web dynpro DC.
    5. In the used DC section added the public part of the testservice DC and also the epbc.prtapi._api.jar for build time and runtime with strong qualifier.
    6. In the web dynpro "Sharing Reference", I added PORTAL:xx.com/testservice
    7. In the component controller, I am calling a method from the Portal Service.
    8. Built the web dynpro DC and deployed it.
    9. But at the run time it gives, NoClassDefFoundError on the xxxservice.
    I looked at many forum threads and tried everything. For eg: changed the Sharing Reference to PORTAL:sap.com/testservice but nothing works.
    Please do suggest me if I am missing something
    Thanks

    Hi Laxmi,
    I am sure something wrong at Portal Service DC creation. On webdynpro part you done fine .. by putting PORTAL:sap.com/testservice
    Check the below steps:
    1. Create DC Portal Applicaiton Stand alone (SDA)
    2. Add portal Service for the newly created portal service dc
    3. build and activate
    4. by default you should be get public part by name API which is compilation dependency
    5. here you dont need to do anything else
    6. on webdynpro just add the used dc to this API public part of portal service dc
    7. add PORTAL:sap.com/testservice  sharing reference
    If u go by this you shouldnt get any error..
    Now, u are saying something like ur own classes .. i think u are trying to put u r own classes to service.. but remeber portal service is to have only IYourService class and YourService class.. other classes should be made to be jar.. and add that jar to External library DC and create PPs compile & Assemble and add that DC to current service dc.
    Hope it is clear.. if not pls let me know..
    Thanks,
    Raags

  • Using Adobe Reader XI I cannot view pdf files from internet. It tells me the error is 103;103

    Using Adobe Reader XI, I am unable to view pdf downloaded from my secure internet sites. I get the error message 103;103

    It worked! Thank you very much.
    Sent from my iPad

  • No longer able to view virtual machine from Hyper-V Manager

    From the Windows 2008 R2 host machine, I can run the Hyper-V Manager and 'connect' to the Virtual Machine.  The window pops up with nothing but a gray background (clearly the same gray background of the log in screen), but no 'ctrl-alt-delete' prompt
    and no ability to log in.  This was previously working fine.
    Note that I can still make a Remote Desktop connection to the Virtual Machine and it works fine.
    Thanks.

    Hi,
    I never seen this issue before, base on my experience, it may cause by your AV soft block some critical components of Hyper-V host, please try the following exclude specific
    directories or process with your AV soft.
    •Default virtual machine configuration directory (C:\ProgramData\Microsoft\Windows\Hyper-V)
    •Custom virtual machine configuration directories
    •Default virtual hard disk drive directory (C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks)
    •Custom virtual hard disk drive directories
    •Custom replication data directories, if you are using Hyper-V Replica
    •Snapshot directories
    •Vmms.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    •Vmwp.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    The related KB:
    Virtual machines are missing, or error 0x800704C8, 0x80070037, or 0x800703E3 occurs when you try to start or create a virtual machine
    http://support.microsoft.com/kb/961804/en-us
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • No Longer Able to Successfully Backup Hyper-V Virtual Machines from Host Without Shutting Them Down First

    Hi all,
    Prior to the new year, I was able to backup my VMs (two of them) using Windows Server Backup on their host server (running Server 2012) without shutting them down, no problem.  Something has obviously changed, and this no longer works.
    When I try to back up my VMs now, the process basically seems to timeout during the 'Creating Shadow Copy of Volumes' phase.  The error log file points to the 'Microsoft Hyper-V VSS Writer' as the culprit (Status [5]; Unexpected Error), and the specific
    message I receive from WSB is:  Component was skipped from volume shadow copy.  The writer experienced a transient error.  If the backup process is retried,
    the error may not reoccur.
    I've seen only a handful of useful articles online about this particular error, but nothing I've tried has worked for me yet, like:
    - Making sure the integration services are installed and enabled
    - Making sure Windows Server Backup is installed on both VMs
    - Making sure there is enough disk space in the VM for the backup to complete
    The most compelling piece of information is that this process worked just fine before the new year started and now I can't make it work at all unless I turn off my VMs and then run the backup.  It just seems like there's some small thing I'm missing
    (a service needs to be updated or turned off or on, etc), but I can't seem to find that information anywhere...
    Any help is appreciated.  Thanks...
    -T

    Hi aalbert140110
    you may want to try using our VssDiag freeware to inspect your Windows and Hyper-V logs:
    http://backupchain.com/VssDiag.html
    All you need to do is enter the date/time when the backup failed and it will collect whatever it finds
    Hope this helps!
    Octavio Tech Support @ BackupChain

  • How to access Sql Server Express installed on Virtual PC from Host?

     
    I have SQL Server Express 2008 R2 installed on Virtual PC. and on my Host machine i have SQL Server 2008 R2 ( Enterprise Version) installed.
    Since Management studio that comes with SQL express does not support SQL profiler, i want to access SQL Server Express from the Host machine’s management studio which has SQL profiler.
    But I could access it using VM’s ip address & instance name

    Hi lax,
    Follow below steps in your Virtual Machine:
    1. Allow remote connections to this server
    The first thing you want to check is if Remote Connections are enabled on your SQL Server database. In SQL Server 2008 you do this by opening SQL Server 2008 Management Studio, connect to the server in question, right click the server and open the Server Properties.
    Navigate to Connections and ensure that Allow remote connections to this server is checked.
    2.  Protocols for MSSQLServer
    The next good thing to check is the SQL Server Network Configuration. Open the SQL Server Configuration Manager, unfold the node SQL Server Network Configuration and select Protocols for MSSQLServer (or whatever the name of your SQL Server instance is). Make
    sure that TCP/IP is enabled.
    3. The Firewall
    If there is still no communication happening between your computer and the remote SQL Server you most likely need to configure your firewall settings.
    A good first step is to figure out which port is being used by TCP/IP (and which you need to open in your firewall). You can do this by right clicking TCP/IP and selecting Properties. Click on the tab IP Addresses .
    That was easy enough and all there is left to do is to allow inbound TCP/IP traffic on Port 1433 in your firewall. In Windows 7 this works something like this. Open the Control Panel and navigate to Windows Firewall. Click on Advanced Settings on the left hand
    side and you should see the Windows Firewall with Advanced Security. Select the Inboud Rules on the left hand side and click on New Rule on the right hand side. This opens the New Inbound Rule Wizard which you can use to allow inbound traffic on Port 1433
    for TCP/IP.
    For more information, please refer to
    http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx.
    In host machine:
    After you have done steps above, you could use the SQL Server Management Studio in the host machine to connect the SQL Server Express R2 in Virtual PC. If you installed a default instance in Virtual PC, you could use VirtualComputerName to login the SQL
    Server database engine. If you installed a named instance in Virtual PC, you could use VirtualComputerName\InstanceName to login the SQL Server database engine.
    Thanks,
    Maggie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

  • Cannot view html images from only one sender

    I have the option set to view remote HTML images. I have junk filtering turned off. I have reset my junk mail filters just in case that was the issue.
    There is email from one sender that is a problem. Instead of images I get the blue squares with question marks. I know the images are available because I can view them if I go directly to my Web based email account.
    Additional info - the account is IMAP. It makes no difference if I copy the message to a folder stored on my Mac.

    I figured it out. I had adjusted the height of the input element to a height that did not work well with the padding. Once I removed the height style and adjusted the padding I got the size I wanted and can see the text as it should be.
    Thanks for your help forgottengods!

  • E71 - Cannot view Video streams from YouTube

    Hey ther,
    i recently picked up the E71, great phone, must say.
    However, i have a concern...
    I tried browsing YouTube & MetaCafe using my WiFi & GPRS connection to view videos of youtube and metacafe.
    The problem however is, once I click a Video thumbnail on the browser, it loads the Real Player as default. However, once the video is buffered 100%, it only plays out the Audio (sound). The Video simply doesn't show up. the RM player simply displays the loading screen.
    Even if I save this video post its audio only playback and view try viewing it offline, the same result, only Audio play.
    Can someone please help??
    Thanks n rgds,
    Raj S

    Check out TubeSock.
    You don't indicate which version of Panther you are using. TubeSock for Mac requires Mac OS X 10.3.9 or later.

  • MD3000 - Change Access From Host to Host-Group

    I've got a Hyper-V partition on an MD3000 called "HyperV-CSV".
    At present, in the "Host-to-Virtual Disk Mappings" it is only accessible by "Host HyperV1".
    I'm trying to allow host HyperV2 access as well, and without causing problems.  What I have done is created a Host Group called "HyperV-Group" where both HyperV1 and HyperV2 are members.
    So what I think I need to do is change the access of the Virtual Disk from "Host HyperV1" to "Host Group HyperV-Group".
    My questions though - will this disconnect the disk from HyperV1 briefly while making the change? Will this properly allow both HyperV1 and HyperV2 to access this virtual disk?
    This topic first appeared in the Spiceworks Community

    Hi AlexMtl,
    It seems the host accesses internet via wifi ,right ?
    The host still can access internet after removing bridge connection then reboot , right ?
    If it is the case , please refer to following setps :
    1. remove bridge from wifi then reboot it to ensure host can access internet
    2. create a new internal virtual switch
    3. share wifi connection  to the new Vswitch (right click wifi connection --> properties --> sharing --> check "allow another network ..."  and select the new internal Vswitch in the drop list)
    4. configure an IP for the new Vswitch same subnet as VM's IP
    5. configure VM's gateway same as the IP of new Vswitch (also configure the DNS server IP for VMs)
    Hope this helps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for