Canon Camera Window will not Launch

When connecting Canon Camera the CameraWindow opens then quits.
Error from Sys log shows “ +[204] : Exited abnormally: Bus error “ I have installed all of the latest updates and still get error. Help what can I do to fix connection?

LN
Thanks for the welcome.
I just upgraded to Leopard 10.5.4 Last week. Before all worked fine now I have all kind of problems.
Canon Camera Window
And my entire Adobe Creative Suite 3 software witch wasn’t cheep
Dreamweaver CS3
Flash CS3
InDesign CS3
Photoshop CS3
Stock Photos CS3
Will not launch.
And I wanted Leopard so I could Install Vista to run some school apps on my PB
I’m beginning to think I should have just bought a cheep Dell for the school apps.
What to do??
Bill

Similar Messages

N95-3 camera application will not launch since fir...

I recently upgraded my firmware on my n95-3. I am now on firmware version V 20.2.011 13-05-08 RM-160 Nokia N95 (19.0). Now when I attempt to launch my camera aplication, all that happens i the screen goes to landscape then back to regular and nothing else happens. Launching via the key, the shortcut or even a third party app that calls it, hs the same result.
I have tested the camera with barcode scannr software and it works fine. It is the camera app. that won't launch.
I have done the following in an attempt to fix the problem.
re-upgraded 3 times
upgraded without the mmc card (in case it had a corrupt program)
This may help. When in a call, if i press the focus key enough to focus but not to "snap", I hear a beep noise. This is new. I use my phone a lot and apparently press this key with my little finger all the time while on the phone.
Please help.

Ooops duplicate post. See the thread above

Iv'e upgraded my iMac to 10.6.8 and now microsoft office 2004 and my canon powershot camera software will not work. any suggestions?

I just upgraded my iMac to 10.6.8. Now my Microsoft office applications,(word, excel, ppt) and my camera software to transfer picts from my camera will not launch. (Separate apps but all stopped working as soon as I upgraded from 10.5.8). The software for the Canon Powershot is Ver.37.2. Image browser 6.2 EOS utility 1.1. Any help would be appreciated.
Also if you could tell me what happens to the individual jpegs that get imported through iPhoto, I would go back to using that instead of the Canon software. I want to be able to go into a folder and see all the jpegs and not have to rely on iPhoto's one enormous file. What happens if that iPhoto file gets corrupt? Thanks, Leesha

Leesha wrote:
I just upgraded my iMac to 10.6.8. Now my Microsoft office applications,(word, excel, ppt) and my camera software to transfer picts from my camera will not launch. (Separate apps but all stopped working as soon as I upgraded from 10.5.8).
Actually, Microsoft Office 2004 works fine with Snow Lepoard OS 10.6.x. However, it does require Rosetta, Apple's app for Classic apps. In your upgrade from Lepoard 10.5.8, Rosetta may not have installed but you can manually install it with the instructions here.
On another note, when upgrading the OS, some anomalies get resolved by repairing disk permissions with Disk Utility in the Utilities folder.
One more note, there was an issue with Rosetta crashing with OS 10.6.8 in February 2012. Apple released a security update that fixed it. You can see if Software Update (launch from the Apple menu) shows it or manually download Security Update 2012-001 v1.1 and install it. Software Update will also show other applicable apps available for updating for your upgraded system.
Rosetta is no longer available with OS 10.7 Lion and beyond. Then you will need to upgrade MS Office 2011 for Mac.
HTH

Photoshop will not launch. Window indicates need JAVA SE6. Already have it, but re-installed. Photoshop will still not launch. Help! MacOS 10.10.1

Since installing Mac OS 10.10.1 photoshop will not run, it will not launch. A window indicates that it needs JAVA SE6 to run. JAVA SE6 is installed. I have re-installed and restarted but photoshop will not run and I get the same message window that I need to install JAVA SE6. How do I make this work?

Have you added any Photoshop Add-on that uses an external JavaScript. Photoshop itself has is own ScriptingSupport Plug-in and does not use an external java. Also Java SE6 is old and has security issues you should update to version SE8
Note the plug-in is system info
Adobe Photoshop Version: 2014.2.1 20141014.r.257 2014/10/14:23:59:59 CL 987299 x64
Required plug-ins:
   3D Studio 15.2.1 (2014.2.1 x001 x003)
   Accented Edges 15.2.1
   Adaptive Wide Angle 15.2.1
   Angled Strokes 15.2.1
   Average 15.2.1 (2014.2.1 x001 x003)
   Bas Relief 15.2.1
   BMP 15.2.1
   Camera Raw 8.7
   Camera Raw Filter 8.7
   Chalk & Charcoal 15.2.1
   Charcoal 15.2.1
   Chrome 15.2.1
   Cineon 15.2.1 (2014.2.1 x001 x003)
   Clouds 15.2.1 (2014.2.1 x001 x003)
   Collada 15.2.1 (2014.2.1 x001 x003)
   Color Halftone 15.2.1
   Colored Pencil 15.2.1
   CompuServe GIF 15.2.1
   Conté Crayon 15.2.1
   Craquelure 15.2.1
   Crop and Straighten Photos 15.2.1 (2014.2.1 x001 x003)
   Crop and Straighten Photos Filter 15.2.1
   Crosshatch 15.2.1
   Crystallize 15.2.1
   Cutout 15.2.1
   Dark Strokes 15.2.1
   De-Interlace 15.2.1
   Dicom 15.2.1
   Difference Clouds 15.2.1 (2014.2.1 x001 x003)
   Diffuse Glow 15.2.1
   Displace 15.2.1
   Dry Brush 15.2.1
   Eazel Acquire 15.2.1 (2014.2.1 x001 x003)
   Embed Watermark 4.0
   Entropy 15.2.1 (2014.2.1 x001 x003)
   Export Color Lookup Tables NO VERSION
   Extrude 15.2.1
   FastCore Routines 15.2.1 (2014.2.1 x001 x003)
   Fibers 15.2.1
   Film Grain 15.2.1
   Filter Gallery 15.2.1
   Flash 3D 15.2.1 (2014.2.1 x001 x003)
   Fresco 15.2.1
   Glass 15.2.1
   Glowing Edges 15.2.1
   Google Earth 4 15.2.1 (2014.2.1 x001 x003)
   Grain 15.2.1
   Graphic Pen 15.2.1
   Halftone Pattern 15.2.1
   HDRMergeUI 15.2.1
   HSB/HSL 15.2.1
   IFF Format 15.2.1
   IGES 15.2.1 (2014.2.1 x001 x003)
   Ink Outlines 15.2.1
   JPEG 2000 15.2.1
   Kurtosis 15.2.1 (2014.2.1 x001 x003)
   Lens Blur 15.2.1
   Lens Correction 15.2.1
   Lens Flare 15.2.1
   Liquify 15.2.1
   Matlab Operation 15.2.1 (2014.2.1 x001 x003)
   Maximum 15.2.1 (2014.2.1 x001 x003)
   Mean 15.2.1 (2014.2.1 x001 x003)
   Measurement Core 15.2.1 (2014.2.1 x001 x003)
   Median 15.2.1 (2014.2.1 x001 x003)
   Mezzotint 15.2.1
   Minimum 15.2.1 (2014.2.1 x001 x003)
   MMXCore Routines 15.2.1 (2014.2.1 x001 x003)
   Mosaic Tiles 15.2.1
   Multiprocessor Support 15.2.1 (2014.2.1 x001 x003)
   Neon Glow 15.2.1
   Note Paper 15.2.1
   NTSC Colors 15.2.1 (2014.2.1 x001 x003)
   Ocean Ripple 15.2.1
   OpenEXR 15.2.1
   Paint Daubs 15.2.1
   Palette Knife 15.2.1
   Patchwork 15.2.1
   Paths to Illustrator 15.2.1
   PCX 15.2.1 (2014.2.1 x001 x003)
   Photocopy 15.2.1
   Photoshop 3D Engine 15.2.1 (2014.2.1 x001 x003)
   Photoshop Touch 14.0
   Picture Package Filter 15.2.1 (2014.2.1 x001 x003)
   Pinch 15.2.1
   Pixar 15.2.1 (2014.2.1 x001 x003)
   Plaster 15.2.1
   Plastic Wrap 15.2.1
   PLY 15.2.1 (2014.2.1 x001 x003)
   PNG 15.2.1
   Pointillize 15.2.1
   Polar Coordinates 15.2.1
   Portable Bit Map 15.2.1 (2014.2.1 x001 x003)
   Poster Edges 15.2.1
   PRC 15.2.1 (2014.2.1 x001 x003)
   Radial Blur 15.2.1
   Radiance 15.2.1 (2014.2.1 x001 x003)
   Range 15.2.1 (2014.2.1 x001 x003)
   Read Watermark 4.0
   Render Color Lookup Grid NO VERSION
   Reticulation 15.2.1
   Ripple 15.2.1
   Rough Pastels 15.2.1
   Save for Web 15.2.1
   ScriptingSupport 15.2.1 <------------------------------------------------------------------ Photoshop Scripting Support Plug-in
   Shake Reduction 15.2.1
   Shear 15.2.1
   Skewness 15.2.1 (2014.2.1 x001 x003)
   Smart Blur 15.2.1
   Smudge Stick 15.2.1
   Solarize 15.2.1 (2014.2.1 x001 x003)
   Spatter 15.2.1
   Spherize 15.2.1
   Sponge 15.2.1
   Sprayed Strokes 15.2.1
   Stained Glass 15.2.1
   Stamp 15.2.1
   Standard Deviation 15.2.1 (2014.2.1 x001 x003)
   STL 15.2.1 (2014.2.1 x001 x003)
   Sumi-e 15.2.1
   Summation 15.2.1 (2014.2.1 x001 x003)
   Targa 15.2.1
   Texturizer 15.2.1
   Tiles 15.2.1
   Torn Edges 15.2.1
   Twirl 15.2.1
   U3D 15.2.1 (2014.2.1 x001 x003)
   Underpainting 15.2.1
   Vanishing Point 15.2.1
   Variance 15.2.1 (2014.2.1 x001 x003)
   Virtual Reality Modeling Language | VRML 15.2.1 (2014.2.1 x001 x003)
   Water Paper 15.2.1
   Watercolor 15.2.1
   Wave 15.2.1
   Wavefront|OBJ 15.2.1 (2014.2.1 x001 x003)
   WIA Support 15.2.1 (2014.2.1 x001 x003)
   Wind 15.2.1
   Wireless Bitmap 15.2.1 (2014.2.1 x001 x003)
   ZigZag 15.2.1
Optional and third party plug-ins:
   CUR (Windows Cursor) NO VERSION
   Face Control II 2.00
   Fine Touch 3.25
   GREYCstoration NO VERSION
   ICO (Windows Icon) NO VERSION
   Reduce Noise 7.0.0.0
   ScriptListener 13.0
   StarFilter Pro 3 3.0.5.1
   SuperPNG 2.0
   Variations 14.2.1 (14.2.1 x001)
Plug-ins that failed to load: NONE
Flash:
   Libraries
   Adobe Color Themes
Installed TWAIN devices: NONE

I am using Windows XP. I have loaded Firefox, but it will not launch. I had success loading and launching on my other computer that is running Vista. I need help please? I do not get an error message.

I am running windows XP and have successefully loaded Forefox. My Firefox will not launch and I do not get an error message. When I click on the firefox icon I see an hourglass for two to three seconds and it still does not launch. Please help!
== Each time I try to launch Firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Do you have NoScript or Flashblock or some similar Extension installed? If so, are you allowing the site, at least on a temporary basis, access by such an Extension?
Your Shockwave for Director is out of date. You can check here: http://www.mozilla.com/en-US/plugincheck/
To update it, use the link on the page below under "Installing Shockwave", download and save to your hard drive, close Firefox, click the file you downloaded, after the install, open Firefox and check on the above link again.
https://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox

Itunes will not launch on Windows Vista no error code

Itunes will not launch on my computer. I have windows vista. I have uninstalled and downloaded itunes repeatedly. I have also tried all of the troubleshooting tips available on the apple support site. But none of them worked. Quicktimes works fine. It is just itunes. I even opened up task manager to check the processes and itunes appears for about a second in the processes tab then just disappears. I have no idea what to do i have an iphone 3gs and havent updated it for a few months now and cannot sync my iphone without itunes. I Have kaspersky internet protection but i doubt thats the problem because itunes was working fine until i updated it.PLEASE HELPPPPPP!

Presumably the configuration fails to complete, so every time you start iTunes it has another go.
As iTunes works normally when you plug in your iPod, you should be able to work round this by creating a new iTunes short cut.
Go to Program Files\iTunes and right click on iTunes.exe. Select: Send to>>Desktop(create shortcut). If you are lucky you will be able to open iTunes using this short cut.
However this work around does not fix the underlying problem that WIndows fails to complete configuring iTunes.

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

Indesign CS4 will not launch in Windows Vista

Indesign CS4 will not launch but all other CS4 programs will in Windows Vista, has been worked perfectly up until mid february, I have spent two weeks dealing with Adobe support, and finally I ran “Windows Installer Clean Up” and restarted as requested on phone call to adobe today, then ran “WinCS4Cleanupscript” which inform me that it was clean (or words to that effect) and restarted. Did new install of CS4, at registration I noticed that the Reg Form was pre filled and with my preferences which was a bit strange. After all that Indesign still does not launch but is running. Please can anyone help.

This is the earlier thread http://forums.adobe.com/message/2621367#2621367
I think the onus is on Rapport to sort its software to prevent it interfering with other applications, and there is a post in that thread that indicates that Rapport is both aware of the problem and is working to overcome it.
I would hope that Adobe itself would have picked up this problem by at least monitoring this forum, but other than adding it to the knowledgebase for its technical support, which I don't expect is an overnight thing to do, I can't see what else it would be expected to do.
Perhaps if anyone from Adobe is monitoring this problem they could chime in here and let us know what the position is. I strongly suspect that Trusteer may have been the reason I couldn't get InDesign to run under Windows 7, and so I rolled the whole shooting match back to XP. I am planning to reinstall W7 with the knowledge that I may have to toggle Trusteer on and off to run InDesign, but it would be helpful to have some assurance from either party that a fix is on its way.
In the previous thread the Rapport response implied there was reference to the problem on its FAQ page. If there is I can't find it.
k

Adobe Digital Editions will not launch on my Windows 8.1 laptop

Adobe Digital Editions will not launch on my Windows 8.1 laptop
I have uninstalled and re-installed several times.
I have successfully used previous versions of ADE on this laptop in the past.

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)

Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)
Yeah

OK, so i cannot enter into iTunes safe mode, whilst monitoring proccesses in the task manager I noticed that itunes will only stay open if i keep my fingers on shift and control-i dont know if that is worth mentioning- the proccess promptly ends after the release of the said keys, (I tried both the shift control keys on either side of the keyboard-same result) so i am stuck there.
P.S.
This version of iTunes had previously worked before, I uninstalled everything apple related after noticing how many processes (-id est-) /applications, were using up my memory.
afterwards I had need for iTunes, (i needed to wipe my iDevice) I reinstalled and this problem has arisen.

I am running Windows 8.1, adobe will not launch, please advise

Can anyone help me resolve why acrobat 10 will not launch in windows 8.1, thanks

Moving this discussion to the Acrobat Installation & Update Issues forum.

TS1717 I tunes 10.7 will not launch on windows 7

I tunes 10.7 will not launch in windows 7

I am having the same problem. Like me, so many posts describe days of work with little to show for it. I have read numerous "solutions" but none work or work fully.
Here we have two of the most influential computer companies in the world: APPLE and MICROSOFT, and hundreds of posts with people asking for help in connecting their Iphone to Windows7, or in getting Itunes under devices, to show their connected IPhone when it does not do so.
You would think that Apple and Windows would have solved this problem and developed wizards to help their customers, but if they have done so, none of the many posts I have read make any mention of it.
Like many who have written on their attempts to solve the problem I have installed and reinstalled Itunes, disabled USB devices, and so one.
I am as interested in understanding what the technical problem(s) are as I am in solving my problem.
Windows has managed to recognize literally thousands of devices yet when I connect my IPHONE 4s (presumably one of millions sold) it is silent. That is as amazing to me as it is frustrating.
If anyone ever gets this figured out a gold star to you, and please contact [email protected]
Thankyou,
Professor Hal

Photoshop Elements 10 will not launch from it's tile in windows 8

Photoshop Elements 10 will not launch(open) from it's tile in windows 8,if I restart the computer then try it, it launches. but once I close the program and try to launch it agian from the tile it won't launch (open)
What going on ?

You might unpin (Unpin from Start) the photoshop elements 10 shortcut from the start screen and then go to
C:\Program Files (x86)\Adobe\Photoshop Elements 10 and right click on the PhotoshopElementsEditor.exe and choose Pin to Start.
And/or if you want an shortcut on the actual desktop you can use Send to>Desktop (create shortcut)
Perhaps the shortcut directly to the pse 10 editor will work better when using the start screen.

I use to be able to click on a link in a website to watch a video and it would launch windows media player. I have installed the plugin but it still will not launch

Windows Media player will not launch from a video link within a website. it worked until I installed FF4. I did install the plug in but still nothing it just goes to a black then blank page when you try to launch the video.
Ideas?

At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Then... Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply. For 10.5/10.6 Network, highlight Interface>Advanced button>DNS tab>little + icon.
DNS Servers are a bit like Phone books where you look up a name and it gives you the phone number, in our case, you put in apple.com and it comes back with 17.149.160.49 behind the scenes.
These Servers have been patched to guard against DNS poisoning, and are faster/more reliable than most ISP's DNS Servers.
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.

HT1926 I downloaded the latest version of iTunes; however, it now will not launch, citing Windows error 127, any suggestions?

I downloaded the latest version of iTunes, now it will not launch. I get a Windows Error 127 message. Any suggestions?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

Canon Camera Window will not Launch

Similar Messages

Maybe you are looking for