Canon printer won't connect since upgrade to Lion

Ever since I upgraded to Lion I can't connect up with my Canon printer anymore. How do I fix this?

Install driver:
http://support.apple.com/kb/DL899?viewlocale=en_US&locale=en_US

Similar Messages

Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb. Any suggestions? Thanks. LL

My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB. Have had no previous issues with printing, scanning or faxing. When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the on my MAC which shows the same problem. All of the color and black cartridges are new.
The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
Any suggestions? Could this simply be a compatibility problem? I'd sure like to keep my Canon printer.
Thanks, LL

Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
Also an FYI - this is the Mavericks forum. The Yosemite forum is here

Epson SX445W printer won't work since upgrading to mountain lion

I upgraded both my iMac and my Macbook to mountain Lion and ever since doing so the less than 6 months old Epson SX445W printer I have, which is supposed to be compatible with Mountain Lion won't print wirelessly anymore.
I've hunted high and low for new drivers, tried removing and re-installing the printer, switched off gatekeeper, all to no avail, the only way I can get it to work is to print via USB.
The Printer network settings show it is correctly linked to the wireless network.
I've tried adding the printer via IP, when I put the printers IP in, the imac detects the printer and asks me if I wish to use the Epson Stylus SX440 (which I select as it is this driver I previously used before mountain lion) and it the tries to install, tries to download new software and then fails, with the error message
'Can't install the software fo the Epson Stylus SX440 because it is not currently available form the Software Update Server.'
I am at a loss as to how to progress, I'm starting to feel the upgrade from Lion to Mountain Lion was pointless, I must admit I was perfectly happy with Lion anyway as it always worked flawlessly for me.
Any help would be appreciated.
Craig

Hi Mende1
When I do that no printer appears unfortunately, only Adobe PDF 8.0
SInce posting this I did try removing and adding again, I have managed to get it to print by using the IP again to add and entering the ip address and then instead of using the default SX440 driver off my machine I selected from the list on the dropdown and chose Series 440, this successfully added the printer, and it just printed a test page, however I'm a little worried that this won't persist as soon as the printer is switched off and a new IP address is assigned by the DHCP server, and I shouldnt need to have to keep re-adding it, any other ideas are most welcome

Itunes store won't connect since upgrade to itunes 8 (vista)

ever since i upgraded to itunes 8, it won't connect to the store. it says the network has timed out after only trying for like a second. Right when i click the itunes store button, the error pops up immediately. I have vista. When i run a diagnose, it says "Internet connect verified, but then it says "secure link to itunes store failed". how do i fix this? thanks

iTunes 8 has created a serious problem with usbaapl.sys and Windows Vista, the device driver for the iPhone and possibly for every other iPod. According to my research, about 1/3 of all Vista users who have installed iTunes 8 are experiencing the problem. It caused me to have the dreaded BSOD about five times before I did a full system restore from my backup drive to get rid of iTunes 8 and go back to iTunes 7.7.1.11. The new Genius Bar apparently allows Apple to advertise more songs for you to buy while poorly putting together custom playlists based on your song choice and your iTunes music library. Pandora.com does a better job of creating custom radio stations for you for free than iTunes 8 does using its custom algorithm and your song library. iTunes 8 has now become a giant piece of bloatware. Apple should know better by now after experiencing the debacles of the MobileMe launch and the poor connection quality of the G3 iPhone. Apple now seems to be putting the bottom line ahead of all else including satisfied customers other than Apple's lunatic fanboys. Steve Jobs should know better and kick some *** at Apple's programming department.
Come on, Apple. Get back to being known for doing things right the first time.
Larry K.

AFP won't connect since upgrading to Mavericks

Since upgrading to Mavericks I cannot connect to my QNAP TS-210 via AFP; this means my Time Machine can no longer find my backup disk and no longer works. Anyone else having similar issues?
I have tried the usual quick fixes:
Firmware is up to date
All OS updates installed
Server reset
DHCP renewed
DHCP switched to try manual setup
IP changed on server and Mac
It's odd as when connecting to server I can enter my login ID and it seems to be validating it ok but then doesnt connect to the server at all?
Any suggestions welcome!

Use a supported Time Machine configuration.
OS X Mountain Lion: Disks you can use with Time Machine
"Note: Some AFP disks from manufacturers other than Apple don’t support Time Machine. If your network uses an AFP disk, but the disk doesn’t appear in the list of devices available for Time Machine backups, contact the disk’s manufacturer."
Your complaint is very common with NAS devices. Some work and some don't. If they appear to work, they may fail upon attempting to restore from the backup, or they may fail every time Apple updates OS X. Given the goal of a backup strategy, using anything other than a supported TM configuration is not an option.

Programs that rely on Java won't work since upgrade to Lion!!!

I opened a program yesterday after the I upgraded to Lion and a message box opened up stating that it would have to update Java for the program to work. The java update seemed to work but the program never opened. I tried to re open the program again and it appreared to start up and then it closed down. I restarted the computer but I got the same result. Any one know how to fix this?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.

External drives won't work since upgrading to Lion.

This is a really frustrating problem. I have two portable external hard drives that have both ceased to work ever since I upgraded to 10.7. These are both used for large video files and I need them to work as they have some important stuff on them.
One is a 1TB WD MyPassport, USB connection.
The other is a 500GB Seagate FreeAgent, FireWire 800 connection.
The drives are both giving me the same weird phenomenon:
I plug them in, and they'll boot up--sometimes right away, sometimes after several minutes--but then they make my Finder worthless. The files won't preview in Cover Flow, and expanding a folder takes forever. When I try opening a video file in QuickTime, I end up with the beach ball of death. I try restarting the computer, but I can't even do that because "Finder (Not Responding)."
So I tried manually shutting down by holding down the power button. When I restarted the computer with the drive attached, the Finder wouldn't launch. The dock would appear, but no icons on my desktop whatsoever. When I unplug the drive, once again hold down the power button to shut down, and restart without the drive attached, everything boots up just fine.
If anyone has experienced this, please help ...

Open Disk Utility, select the external disk in the sidebar and verify the disk. If there's an issue with them, repair the disks

Print menu different since upgrading to Lion 10.7.4. Pop up menu no longer has Preview and lost paper size selection. Photos all printing credit card size. Still using iPhoto 6.0.6. Have upgraded printer drivers.

Print menu is different since upgrading to Lion 10.7.4. Pop up menu no longer has Preview and lost paper size selection. Photos are all printing credt card size and I can't get it changed. (Have tried changing in Page Setup.) Have upgraded my printer drivers, but still no luck. Still using iPhoto 6.0.6.

A slow boot time can be caused by login items.
User Login Items:
    Flux
    NoSleep
    ClipMenu
    Canon IJ Network Scanner Selector2
    BetterTouchTool
    USBOverdriveHelper
    TotalFinder
    Gmail Notifr
Open System Preferences > Users & Groups > Login Items
Remove one login item noted above then restart your Mac to test. It may be one or multiple items causing the slow boot.

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error. Any ideas?

Hi Pebbles2313,
It sounds like you have an issue with your printer software. You may find some of the software necessary to run your printer through the following link:
OS X: Printer and scanner software available for download - Apple Support
http://support.apple.com/en-is/HT201465
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but comes up with software unavailable error.

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

Try downloading the driver directly from Canon's web site.

Canon MX700 Printer problem since upgrade to Lion.

Hi
Since upgrading to Lion every time I try to print something on my Canon MX700 networked printer I get a communication error. I found that what I have to do to get it to work is to print the document a second time and then delete the first document in the printer queue. This pauses the printer and when it is resumed the second document prints successfully.
Anyone else have this problem or can anyone shed any light on what might be wrong?
Scanning seems to work OK.
Many Thanks

you need to upgraded canon MX700 that's support Lion.
you can download updated driver from http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_s eries/pixma_mx700#DriversAndSoftware
But remember, you should trash the BJPrinters folder, located in HD > Library > Printers > Canon. This action to uninstall driver canon MX700 that's installed on your mac

Can't always connect to remote speakers since upgrading to lion

In one fell swoop I did a lot of upgrading, and ever since I haven't been able to reliably connect to any remote speakers using iTunes on my iMac. From iTunes (or the Remote app on the phone or iPad) I can see remote speakers, but I cannot connect. From iTunes, I just get the stripy progress bar, and it won't ever go away unless I cancel out. From the remote app, it just becomes unrepsonsive.
Context:
I have a iMac with OSX Lion, that I upgraded from Snow Leopard a few weeks ago. At about the same time, I updated iTunes to 10.5 from the last 10.4 release to be able to get the IOS 5 update on my and my wife's phones.
I have an Airport Extreme connected to our broadband, with 3 airport expresses in various places in our house connected on a wireless network to stereos for remote speakers. The iMac is connected to the Airport Extreme via ethernet. After upgrading the OS and iTunes, I got a notice that there was a firmware update for my two most recent airports (the Extreme and one of the expresses). They are running version 7.6 of the firmware, the other two airports are running 6.3.
There has been no change to the physical environment -- no sources of interference or anything like that. I can play music from the Music app on my phone to any of the remote speakers, there is no problem there.
About half the time, if I restart everything (wireless base stations, and then the computer) I can get the remote speakers to work. However, the next time the computer wakes up from sleep mode, I have the same connection problem described above.
Has anyone else experiences these sorts of troubles? I have seen some similar problems with older versions of all these applications and OS's -- and the solution there was to turn off ipV6 -- however, it doesn't look like that's an option now. Is this an identified bug, and is there a fix on the way? Is there anything I can do in the meantime?

Well, after some experimentation and internet-lookin', I deduced that is possibly a wi-fi problem. It seems that many people are having wi-fi problems since upgrading to Lion, and although I'm not connecting directly to my wireless network, it does form a pretty big chunk of my setup describe above.
So I tried the fix outlined on OSX Daily here: http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
Essentially what it has you do is to create a new network location, name it, and then renew your DHCP lease. This seems to have worked for the time being.

HT2506 Is there anyone else who is having problems printing with Preview since upgrading to Lion OS X?

Since upgrading to Lion OS X, I have not been able to print any of my documents that were created in Adobe PDF. All calls to customer support have been a bust.
When I try to print anything it comes out looking like this:
Apple PREVIEW team!!!! PLEASE HELP!!!

Hi Linc...
Here is a copy of your prior post to me on a different forum...
Still no resolution...
Linc Davis
Re: Anyone having problems with Preview since upgrading to Lion OS X? When using a pdf form that allows multiline text, I am finding that the printing is completely illegible. The lines are stacking on top of each other.
Mar 11, 2012 3:13 PM (in response to pshrynking)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, selectHelp from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.
pshrynking
Re: Anyone having problems with Preview since upgrading to Lion OS X? When using a pdf form that allows multiline text, I am finding that the printing is completely illegible. The lines are stacking on top of each other.
Mar 11, 2012 4:13 PM (in response to Linc Davis)
Did all of that yesterday, with the Apple Representative on the phone, and nope, still a problem...it was kind of exciting, really, they kept going up and up the tiers of support until I got disconnected...Fortunately I had the email address of the gentleman who was helping me so that I could email him back and let him know that we got disconnected...as you might imagine, he still has not emailed me back. They were able to receive a copy of the form that I use for charting and try it in their facility on their computers, so we know:
1- it is not just my computer.
2- it occurred only after installing Lion OS X, not sure if they have tried it on Snow Leopard, but that's what I would have done if I was them...assuming that somewhere in Apple someone has not upgraded to Lion.
3- it is not just my software.
I think the problem is with the newer iteration of Preview not communicating well with the Adobe .pdf. probably some line of coding that needs to be written and insertedinto their program for multiline text.
:-) Thank you for your help!

Problem Printing PDFs since upgrading to Lion

Since upgrading to Lion on two machines (macbook pro 2011 and imac 2010) I have had a HP CM2320 and a HP M2727 produce the following error whilst printing from Preview PDF documents:
/usr/libexec/cups/filter/cgpdftops failed
The PDF documents are many but here is an example,
http://dl.dropbox.com/u/26737363/Modified%20contract%20Causing%20error%20in%20pr int.pdf
The only way I can print is to print using Generic PCL printer driver. Gereic Postscript also causes the problem.
The problem doesn't occur when printing from Snow Leopard.

I went to the page of your link: Safari 5 without plugins displayed the pdf page perfectly.
Then I saved as.. to the desktop.
Then I opened it with preview, printed pefectly.
Closed Preview and opened it in Adobe Reader (I do not use Acrobat): printed perfectly.
I don not have a HP printer but I tried it on Canon Multifunctionals.
So I conclude: it is not Safari (or a plugin), it is not the document itself, it has to do with the HP driver(s) probably.

Safari works great on my iMac, but not so well on my Macbook Pro since upgrading to Lion. I get a message that I am not connected to the internet when I try to open a webpage even though the wireless icon at the top of my screen shows I am connected.

Since upgrading to Lion I am having problems with Safari on my Macbook Pro. I am using wifi to access the internet and the internet works in all other application except for Safari. When I try to access a webpage most times I get a error message saying I am not connected to the internet. If I click on diagnose the problem, I get connect again to the internet through the diagnostic process and the webpage generally works. This is not a problem when wired to the internet.

Check your network settings, in particular the advanced setting "DNS Server". If it is by chance 127.0.0.1, make sure to change is and use a know DNS Server (from Google for example, or your own Router local address).

Canon printer won't connect since upgrade to Lion

Similar Messages

Maybe you are looking for