Cant create contact out of dialled number - asha31...

For nokia asha 311, i am not able to create a contact out of a dailled number. e.g. I type a new number in dialler, after that i want to create a contact out of this or update a current account, cant do in asha 311

Not an option.

Similar Messages

Cant create contact Group in Itunes

When i create a new Group in my Adressbook on my iMac, that Group does not appear in Itunes when I try to Sync my iPhone.
Is there any special trick i should use?

anyone ?

Delivery Created with out Material Number

HI
I created an STO for material, when i have done the VL10B i got a message "See log for information about creating deliveries"
A Delivery got created with out the Material number, When i look in the Document Flow for the Delivery Created its preceding document (PO) is not linked
In the log information i see an error, Please advise
Diagnosis
The sales unit is not allowed for the material in item
    000001.
System Response
The system does not allow further processing of this item.
Procedure
Check your entry.
    Select a sales unit which is defined for the material in the
    material master record. Normally the sales unit will be
    determined immediately from the master master record.

see the change log of material master in MM04.
check if the sales unit got removed recently (after the PO creation - before delivery creation)
if it is not caused by material master directly, then check if you have any userexit in place that changes the sales unit in the delivery.
SAP has a sales unit in mind which is not available in material master, hence it issues this error.

Create contact group

Anyone know WHY oh WHY oh WHY we STILL cant create contact groups? I'm sick of adding people to emails/textx one by one!
What's the hold up?

w1se,
That's the reason why I developped Easy Group, a free application to create group of contacts, and send group emails and texts in one tap, without adding all people one by one.
http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
Rémi
Note: As I am Easy Group developper, I may receive some form of compensation, financial or otherwise,from my recommendation or link.

Missing contact when "create new contact" from email or number

I am having a really strange problem on my iPhone and think it will be a fun mystery to solve. Please help me!
It is currently set up with google so that my mail/notes are using gmail IMAP and my contacts/calendars are using Google Sync. So far it's been working pretty well except for all the known many bugs and issues (please fix these, google!). I have no other email, calendar, or contact accounts set up (not even syncing with my computer).
I received an email from a friend who I did not yet have a contact for, so in the email header I clicked her name and chose to "Create new contact." As usual, the email address was already in the "email" field, so I just edited her name and filled out the "company" field and pressed Done. The "from" field in the email updated to show that the contact had been added to my phone and that it recognized the email as being from her.
Now, I go to add a number to her contact and when I navigate through my contacts list, her name is no where to be seen. I've tried searching through the contacts by using the search bar at the top of both the Phone and the Contacts apps, but nothing shows up. However, when I compose an email and start typing her address, it recognizes her as a contact. Even weirder, I just tried the entire phone search spotlight feature, and it found her contact right away, as if it were any normal contact. When I click on it, it brings me to her contact page, which I cannot edit, and when I press the little left arrow "Contacts" in the top left of the screen to go back to the whole listing, she's not there!
When I go to add contacts using the little + symbol in the top right of the phone app, it works normally and the contact appears as usual. But every time I try to do a new contact from email, this happens! Choosing to "update existing contact" works fine, though. So I've been forced to create an empty contact with her name in the Phone app, and then add the email to it.
Please help my find where in my phone this contact is residing, and how to bring it out so I can find it. I have tried force-quitting the relevant apps from the multi-task dock, and even turning off and on my phone, but to no luck.
Update: Just tried creating a new contact from a phone number I've previously dialed and the same thing happens! Where are my contacts going?? This is so weird!
Not sure if this is just a google sync issue, but I figured I'd post it in case other people are having similar issues
Device: Apple iPhone 4
Carrier: AT&T
Country / Language: USA English
OS: iOS 4

I recently experienced a similar event. I was adding from Contacts "+" button on the iPhone 4. I completed entering the data & hit "done". I went back to add a photo. I hit "done" & went to test the result. No new contact. Search did not find it. Tried two more times with different contacts. Same result.
At one point, the "All Contacts" directory went blank. Nothing. Seconds later the contacts returned. Scary. I rebooted the iPhone. No new contacts but old ones fine.
I then entered with an old iPhone on OS 3.2 same data. Showed quickly via MobileMe. On the new iPhone added photo the photo. All OK. From an iPad, OS3 I did the same. Added photo in new phone. All OK. I added from the new iPhone including photo. All OK.
The iPhone IOS4 reboot may be the answer. Wish I had tried older systems before reboot.

Is there a bug with creating a contact out from an app?

I work with my iPhone 3GS OS 3.1.3 and use email, calendar and contacts fully synchronized with the Exchange server at the office. And so far, It works great. But, unfortunately, is there a little bug.
I use only the contacts folder from Exchange and there is no "local" iPhone only contacts folder. But now when I create a new contact out from an app, Maps for example, it is not stored in a default contacts folder (I can also not define such a one anywhere), but somewhere in nirvana??
In the contacts, he is nowhere to be found, and is therefore not synchronized with my Exchange server. Only with the iPhone search this contact can be found and is still accessible.
Someone else has also noticed this problem already? Is there a workaround for it?

It's part of your dev agreement, especially when working with betas. If you can get in to download them, you should be able to hit everything else, including the forums.
Get the login sorted out and you'll have significant resources that will make it worthwhile.
Typically that bounce needs you to use the Safari(Mac) menu 'Empty caches'.
Good luck in any case.

JSR-75 PIM API creating Contact with more than one Number (Phone,Fax ...)

Hi everybody
I try to create a contact with more than one Phonenumber using the method contact.addString(...) .
Contact with one single number is no Problem but contacts with more than one Number are ignored and are not stored to the phonebook. I try to add the Numbers using a for -loop. Is there an other way to solve this Problem?
please Help.
Thank You.

Wonder if you have made any progress - if so,
could you share ?

Cant create connection Pool for MS SQL Server 2000 with Microsoft Driver

i am using bea weblogic server 6.1, i cant create connection pool while using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft website. when
i give the following class name for JDBC driver and the connection url and click
apply while selecting the available server, a number of exception appears in default
server (that is the connection pool cannot be created..... cannot load the driver
class).
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple application in Jbuilder
7.0 the application runs successfully and fetches the data deom MS SQL database
but in at Bea connection Pool is not created with these settings. i do give appropriate
username and password in properties field in connection pool. Thankx for any help!

khabbab wrote:
That was the original code part from "startweblogic" :
:runWebLogic
echo on
set PATH=.\bin;%PATH%
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;
echo off
and i changed it to :
:runWebLogic
echo on
set PATH=.\bin;%PATH%
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;D:\Program Files\Microsoft
SQL Server 2000 Driver for JDBC\lib\msbase.jar;D:\Program Files\Microsoft SQL
Server 2000 Driver for JDBC\lib\msutil.jar;D:\Program Files\Microsoft SQL Server
2000 Driver for JDBC\lib\mssqlserver.jar;I suggest moving or copying the three ms driver jars to a directory that has no blanks
in it so the classpath doesn't have blanks in it. Ie:
go to the "D:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib"
directory and do this:
mkdir D:\microsoft_jdbc_driver
cp *.jar D:\microsoft_jdbc_driver
Then make the classpath include D:\microsoft_jdbc_driver\msbase.jar etc.
Joe
>
>
echo off
when i save and run the bat file, server appears then disappears.
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
The class path which is echoed at server startup does not include thepaths to
driver jar files. when i edited the "startweblogic.bat" file and includedthe
driver class paths to jar files, now the server doesnot even run. tellme what
to do now???Show me what change you made to the startweblogic file.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
kindly tell me how can i check that the class paths for driver jarfiles are included
in that string? thanks. also tell me can not i use the jdriver forsql server
2000?.The startup script will echo what it's doing, including printing out
the classpath
it will use. Yes you can use the jDriver for MS SQL2000. It is sufficient
for
basic JDBC, but the MS drivfer is preferable in some ways.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
i am using bea weblogic server 6.1, i cant create connection
pool
while
using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft
website.
when
i give the following class name for JDBC driver and the connectionurl and click
apply while selecting the available server, a number of exception
appears
in default
server (that is the connection pool cannot be created..... cannot
load
the driver
class).The server startup script creates a string that will become the
classpath
for the server.
This string is part of the java call to start the server with a-classpath
argument. You need to
make sure the MS driver jars are part of that classpath string.
Joe
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple applicationin Jbuilder
7.0 the application runs successfully and fetches the data deom
MS
SQL database
but in at Bea connection Pool is not created with these settings.
i
do give appropriate
username and password in properties field in connection pool.
Thankx
for any help!
khabbab wrote:
The class path which is echoed at server startup does not include thepaths to
driver jar files. when i edited the "startweblogic.bat" file and includedthe
driver class paths to jar files, now the server doesnot even run. tellme what
to do now???
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
kindly tell me how can i check that the class paths for driver jarfiles are included
in that string? thanks. also tell me can not i use the jdriver forsql server
2000?.The startup script will echo what it's doing, including printing out
the classpath
it will use. Yes you can use the jDriver for MS SQL2000. It is sufficient
for
basic JDBC, but the MS drivfer is preferable in some ways.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
i am using bea weblogic server 6.1, i cant create connection
pool
while
using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft
website.
when
i give the following class name for JDBC driver and the connectionurl and click
apply while selecting the available server, a number of exception
appears
in default
server (that is the connection pool cannot be created..... cannot
load
the driver
class).The server startup script creates a string that will become the
classpath
for the server.
This string is part of the java call to start the server with a-classpath
argument. You need to
make sure the MS driver jars are part of that classpath string.
Joe
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple applicationin Jbuilder
7.0 the application runs successfully and fetches the data deom
MS
SQL database
but in at Bea connection Pool is not created with these settings.
i
do give appropriate
username and password in properties field in connection pool.
Thankx
for any help!

Sorry but we cant create a repair while Find my iPhone is active

Hello everyone. First of all please accept my appologies in case im posting to the wrong place. I bought an iphone 5 used, like half year ago on ebay and now it stopped turning on. I browsed for troubleshooting on expresslane and came up to the page where it offered to mail phone to apple for repair. I decided to do that but on a certain step i got a message "Sorry but we cant create a repair while Find my iPhone is active. Youll need to turn off Find My iPhone and retry this serial number." Well i knew i never turned this feature on personally, it appears that the previous owner did that and never erased this feature before selling and i never checked for that before using. I even never installed any apps of any kind. Decided to contact ebay seller to ask if they could turn the feature off. They appeared to be wholeasalers who resell used devices and never keep a record of what they buy and sell. Contacted Apple telephone support, they confirmed that the only way device could be serviced is to turn the feature off. A vicious circle. Dead end? Any thoughts?

fletchjay wrote:
Yes and in my case i cant find who i bought it from. Now its a useless device for me
I don't understand? You don't know who you bought it from? So, was this a purely private sale over the internet or something?
Activation lock may lead to many such scams if people insist on buying used from unknown parties. Someone steals someone else's phone, sells it online, and of course, it is blocked from being restored and activated by the original owners perfectly legitimate use of Activation Lock.

Creating Contact Sheets by selecting images in sub-folders

I'm new to scripting, so not sure whether this is within the realms of possiblity, but hope that there's an expert out there up to the challenge!
My goal is to develop a script to automate the process of creating contact sheets for each pupil of a school photoshoot. The folder structure being used presently is:
1st level folder:     School name (e.g. "Southbridge School")
2nd level folders:     Class teachers name (e.g. "Smith")
In each 2nd level folder (i.e. representing each class) there are always 3 images per child (post processed, so ready to convert to contact sheets). The image numbers run sequentially, so the first 3 image numbers in the folder are of the 1st child, the next 3 are of the 2nd child, and so on....
The script I'm looking for would allow me to point Photoshop to the 1st level folder and then automatically create a contact sheet for all children 'found' in the sub-folders. To do this the script would need to do the following:
Taking each 2nd level folder in turn, recognise each 'child' is represented by 3 consecutive images - and starting with the 1st 3 images in the folder create a contact sheet. Then, move on to the next 3 images in sequence and create the next contact sheet, and finish after it completes the final 3 images in the folder. Then, move on to the next 2nd level folder...
Create each contact sheet with the 3 images in colour and then the same 3 images in black and white (so 6 images per contact sheet), including the image number under each and a copyright watermark
Save all contact sheets generated from all of the classes all together in 1 new folder at the 2nd level called "Contact Sheets"
Give each contact sheet a unique name in the format "<Class teachers name> - xxx"   (e.g. "Smith-1", "Smith-2" etc...)
So, are there any Photoshop masters out there up to this challenge?! Your help would be greatly appreciated because the learning curve on this one looks v. steep!
Alternatively, if you can think of a better way of doing this I would also be keen to hear!
Thanks

Awesome! I didnt even know aperture could do that
Now another quick question on this topic, if im using RAW files, does aperture need to convert the file to jpeg or tiff (like it does if you export version as jpeg)?
If it does, that may be a problem as it takes forever for aperture on my macbook to convert raws and save as jpegs, like a good minute or two per photo, and if i have 200odd photos....not good, people will crack it waiting and leave.
Or does it print as raw? Cause im pretty sure my printer (or any printer) can not print raw files. Will try it tonight on my printer but a heads up will be useful.
I could just shoot in hi-res jpeg, but id rather shoot raw incase they want a large poster size print etc.
Thanks.

How to easily create contact groups from MacMail

Here's my dilemma: I want to create a group contact that consists of 27 individuals. The email addresses of these contacts are contained in one email that someone sent me. In order for me to put each contact into a group, I have to go through an exasperating number of steps which are
1) click on the email address, which brings me a drop down menu
2) select "Create Contact"
3) Go to Address Book and type in the name of that contact, then click save
4) Go to the menu to select the "View by Group"
5) Pull the contact into that group
In SnowLeopard, the Address Book allowed one to see in one window the groups, contacts, and new form, so that I didn't have to vascillate between the different views. Is there anything like that in Lion? If I have to do this for 27 new contacts, this is really going to wear out my patience! Thanks in any advance for any suggestions.

Use Mail Scripts' Add Addresses script. It seems to work under Lion, but very slowly. I had to let it run several minutes before it put up the dialog to select addresses and add to a Group.

Palm Profile cannot sign in and cant create new palm profile!

Hello,
I am looking for help with my company Pre 2 EU Unlock Phone.
I am an HP Employee and i got my Pre 2 months ago, then i dont have any issue to create my palm profile - [email protected]
Few days ago I wipe my phone coz it was very slow and when i try to sign in i get an error - Sign In Failed.
Of course i check the site and everything looks fine. I delete the device under my profile coz i thought that cause any issue. And try to log on again - unsuccessfully
Then i try to create new profile and again nothing happen
I go to live chat and i have 3hours chat with support - again no success(Chat session ID:99825861). We try everything possible but its not working..
Ofcourse web chat rep try to explain me that the root cause is in my carrier which is not true because my card have 3G and its working perfectly.
Because when i type wrong password it said me password is wrong and i click on forgot password i select the secret question and change the password via the phone - which is a clear proof that Internet 3G is working!
Then i decide to downgrade to 2.0 - again cant login and cant create new profile, try with 2.01 again no success.
Now back on 2.1 with #*DEVMODE# everything is working i have signal and i can use the phone but i dont have app catalog and cant install apps because there is no Palm profile on the phone.
I try SDK tool and to find what is the app which start profile creation card with palm-launch but without success.
So i have few Question
- Do we(you) have a problem with WebOSProfile Services ?
- why i cant create new or login to my existent profile ?
- in DEVMODE how i can create palm profile (is that possible) and if it is how to do it ?
- what is the HP internal group which support this services and how i can contact you internaly ?
Looking for your reply because thats and urgent and i cant use my phone more than 3 days
Post relates to: Pre 2 p102ueu (Unlocked EU)
Post relates to: Pre 2 p102ueu (Unlocked EU)

Djumanta wrote:
Dear Friends
Please Help me !!
I try to upgrade my palm pre + and after that i cannot login to my palm profile
i have tried so many time and it keep rejected all the time
Please give me solution coz i cannot use my phone, i cannot make a call or anything before finish the palm profile login
i will appriciated your help
Post relates to: Pixi Plus p121vzw (Verizon)
What do you mean by "upgrade?" If you've installed some software version that isn't supported for your device, then you may have to use the WebOS Doctor to go back to a supported version.
If you've "upgraded" to a supported version, then this problem will require you call Palm/HP's support to find out why you can't sign into your profile.
HTH

Cant figure this out! Help needed!

Hi,
Ok I need some clearing up and some help. This is a program that generates receipts for an art supply store which sells three items: a brush set; a set of oil paints; and a can of oil canvas primer. The program is able to process multiple orders. For each order placed, calculate the order and print a receipt itemizing each item @ cost, the tax, the Environmental Levy, and the total cost.
The cost of the items are:
1- Brush Set: $8.00
2- Set of Oil Paints: $40.00
3- Oil Canvas Primer: $18.75
4- Taxes: 14%
5-Environmental Levy: 2% on all oil based products (including the paint set and primer). Levy calculated on product cost only (i.e. calculate without tax).
The program should also keep track of the total numbers of each item ordered. Using these values, the user can, at any time, generate a receipt summarizing all orders placed up to that point. When the user enters the sentinel to quit the program, calculate and print one final receipt summarizing all of the orders that were placed. You should also calculate and print some receipt statistics: the average cost of the receipts and the smallest and largest receipts (in terms of cost).
Your program will make use of 2 static methods (in addition to the main() method): toCurrency() and createReceipt().
Ok the deal is that I have the input loops set up fine they all work, except for Total because nothing shows up! I dont know what to do for the output nor the calculations and where or what methods I have to use and how to call them up into Main. This is what I have so far...I added in comments to guide myself but I cant figure it out...Please help thanks
import javax.swing.*;
import java.text.NumberFormat;
class Store{
public static void main(String[]args){
String input = JOptionPane.showInputDialog(null,"Welcome to the Arts Store! \nEnter the following selections: \nOrder\nTotal\nQuit");
String header,numBrush,numOil,numCan;
while(!input.equalsIgnoreCase("quit"))
          if(input.equalsIgnoreCase("order"))
                    numBrush = JOptionPane.showInputDialog(null,"Enter the Amount of Brushes:");
                    double brush = Double.parseDouble(numBrush);
                    numOil = JOptionPane.showInputDialog(null,"Enter the Amount of Oil Paint:");
                    double paint = Double.parseDouble(numOil);
                    numCan = JOptionPane.showInputDialog(null,"Enter the Amount of Canvas Primer:");
                    double canvas = Double.parseDouble(numCan);
     else if(input.equalsIgnoreCase("total")){
          //calculate the reciept
          //call the method createReciept
     else
          System.out.println("Sorry wrong input! Try again!");
          input = JOptionPane.showInputDialog(null,"\nEnter the following selections: \nOrder\nTotal\nQuit");
     }//end while loop
//calculate and print final reciept
//call up createReciept() method
//display average cost and smallest and largest order
     }//end main
public static String toCurrency(double value) {
NumberFormat num =NumberFormat.getCurrencyInstance();
String str = num.format(value);
return str;
public static double createReceipt(String header, double numOfBrushSets, double numOfOilPaints, double numOfPrimers){
/*This method will generate a receipt in System.out.println
This method has 4 parameters: a String header that describes the order being calculated
(e.g. "Receipt Number 1", "Total of 10 Receipts", etc.) and 3 int parameters for the number of Brush Sets, Oil Paints, and Oil Canvas Primers.
Calculate the cost each item, the tax, the environmental levy (2% only on oil based products), and the total receipt cost.
Use toCurrency() to format all currency values to 2 decimal places. Finally, createReceipt()
should return the total cost to the calling method where it will be used to update the receipt statistics. */
numOfBrushSets=8.00;
numOfOilPaints=40.00;
numOfPrimers=18.75;
double total=numOfBrushSets+numOfOilPaints+numOfPrimers;
double tax;
tax=total*0.15;
System.out.println("Welcome to the Store");
System.out.println(" You have purchased this many brush sets:"+numOfBrushSets);
System.out.println(" You have purchased this many paint buckets:"+numOfOilPaints);
System.out.println(" You have purchased this many canvas primer sets:"+numOfPrimers);
return tax;
}

import java.text.NumberFormat;
import javax.swing.*;
public class StoreRx {
    public static void main(String[]args) {
        String input = JOptionPane.showInputDialog(null,"Welcome to the Arts Store!" +
                          "\nEnter the following selections: \nOrder\nQuit");
        // create some variables to remember things as we go
        int totalBrushes = 0;
        int totalPaint   = 0;
        int totalPrimer = 0;
        double totalReceipts = 0;
        double smallestReceipt = Double.MAX_VALUE;
        double largestReceipt = Double.MIN_VALUE;
        int count = 0;
        while(!input.equalsIgnoreCase("quit")) {
            if(input.equalsIgnoreCase("order")) {
                String numBrush = JOptionPane.showInputDialog(null,
                                 "Enter the Amount of Brushes:");
                int brush = Integer.parseInt(numBrush);
                String numOil = JOptionPane.showInputDialog(null,
                                 "Enter the Amount of Oil Paint:");
                int paint = Integer.parseInt(numOil);
                String numCan = JOptionPane.showInputDialog(null,
                                 "Enter the Amount of Canvas Primer:");
                int canvas = Integer.parseInt(numCan);
                double total = createReceipt(brush, paint, canvas);
                if(total < smallestReceipt)
                    smallestReceipt = total;
                if(total > largestReceipt)
                    largestReceipt = total;
                totalBrushes += brush;
                totalPaint    += paint;
                totalPrimer   += canvas;
                totalReceipts += total;
                count++;
            else
                System.out.println("Sorry wrong input! Try again!");
            input = JOptionPane.showInputDialog(null,
                        "\nEnter the following selections: \nOrder\nQuit");
        }//end while loop
        // "quit" brings us here
        System.out.println("Welcome to the Store");
        System.out.println(" You have purchased this many brush sets: " +
                             totalBrushes);
        System.out.println(" You have purchased this many paint buckets: " +
                             totalPaint);
        System.out.println(" You have purchased this many canvas primer sets: " +
                             totalPrimer);
        //display average cost and smallest and largest order
        double average = totalReceipts/count;
        System.out.println("smallestReceipt = " + toCurrency(smallestReceipt) + "\n" +
                           "largestReceipt = " + toCurrency(largestReceipt) + "\n" +
                           "average receipt = " + toCurrency(average));
    }//end main
    public static String toCurrency(double value) {
        NumberFormat num = NumberFormat.getCurrencyInstance();
        String str = num.format(value);
        return str;
     * This method will generate a receipt in System.out.println
     * This method has 4 parameters: a String header that describes the order being
     * calculated (e.g. "Receipt Number 1", "Total of 10 Receipts", etc.) and 3 int
     * parameters for the number of Brush Sets, Oil Paints, and Oil Canvas Primers.
     * Calculate the cost each item, the tax, the environmental levy (2% only on oil
     * based products), and the total receipt cost. Use toCurrency() to format all
     * currency values to 2 decimal places. Finally, createReceipt()
     * should return the total cost to the calling method where it will be used to
     * update the receipt statistics.
    public static double createReceipt(int brushes, int paints, int primers) {
        double priceOfBrushSets = 8.00;
        double priceOfOilPaints = 40.00;
        double priceOfPrimers   = 18.75;
        double taxRate = 0.14;
        double environLevy = 0.02;
        double subTotal = brushes * priceOfBrushSets +
                          paints * priceOfOilPaints +
                          primers * priceOfPrimers;
        double total = subTotal * (1.0 + taxRate + environLevy);
        return total;
}

Error while creating contact through API in Install Base

Hello
I am trying to create contacts when creating a install base through API...
I tried below code as per metalink note# 215456.1 and giving the below error. I checked setup andI have 'Ship To' exists in Instnace Party Account Relationsship setup in the aplication and also I have a party Id 1232890 exist in hz_parties table with party type as 'Person' and I passed contact_ip_id as instance_party_id from CSI_I_PARTIES table for the instance to be update...
Also, can anybody help me how to purge the error messages before calling the API, suppose if i have 2 records and all two records will error then my second record error getting contatenated with my first error and message count also getting increased(see error message below as message count coming as 2 even though there is only one error)
SET SERVEROUTPUT ON SIZE 1000000
DECLARE
p_instance_rec CSI_DATASTRUCTURES_PUB.INSTANCE_REC;
p_ext_attrib_values_tbl
CSI_DATASTRUCTURES_PUB.EXTEND_ATTRIB_VALUES_TBL;
p_party_tbl CSI_DATASTRUCTURES_PUB.PARTY_TBL;
p_account_tbl CSI_DATASTRUCTURES_PUB.PARTY_ACCOUNT_TBL;
p_pricing_attrib_tbl CSI_DATASTRUCTURES_PUB.PRICING_ATTRIBS_TBL;
p_org_assignments_tbl CSI_DATASTRUCTURES_PUB.ORGANIZATION_UNITS_TBL;
p_asset_assignment_tbl CSI_DATASTRUCTURES_PUB.INSTANCE_ASSET_TBL;
p_txn_rec CSI_DATASTRUCTURES_PUB.TRANSACTION_REC;
x_instance_id_lst CSI_DATASTRUCTURES_PUB.ID_TBL;
x_return_status VARCHAR2(2000);
x_msg_count NUMBER;
x_msg_data VARCHAR2(2000);
x_msg_index_out NUMBER;
t_output VARCHAR2(2000);
t_msg_dummy NUMBER;
BEGIN
p_party_tbl(1).instance_party_id := null;
p_party_tbl(1).instance_id := 1216497;
p_party_tbl(1).party_source_table := 'HZ_PARTIES';
p_party_tbl(1).party_id := 1232890;
p_party_tbl(1).relationship_type_code := 'Ship To';
p_party_tbl(1).contact_flag := 'Y';
p_party_tbl(1).contact_ip_id := 1699185;
x_msg_count := 0;
p_party_tbl(1).OBJECT_VERSION_NUMBER := 1;
-- Now call the stored program
csi_item_instance_pub.update_item_instance(
1.0,
'F',
'F',
1,
p_instance_rec,
p_ext_attrib_values_tbl,
p_party_tbl,
p_account_tbl,
p_pricing_attrib_tbl,
p_org_assignments_tbl,
p_asset_assignment_tbl,
p_txn_rec,
x_instance_id_lst,
x_return_status,
x_msg_count,
x_msg_data);
-- Output the results
if x_msg_count > 0
then
for j in 1 .. x_msg_count loop
fnd_msg_pub.get
( j
, FND_API.G_FALSE
, x_msg_data
, t_msg_dummy
t_output := ( 'Msg'
|| To_Char
( j
|| ': '
|| x_msg_data
dbms_output.put_line
( SubStr
( t_output
, 1
, 255
end loop;
end if;
dbms_output.put_line('x_return_status = '||x_return_status);
dbms_output.put_line('x_msg_count = '||TO_CHAR(x_msg_count));
dbms_output.put_line('x_msg_data = '||x_msg_data);
-- COMMIT;
END;
ERROR
SQL> @p
Msg1: The Party Relationship Type (Ship To) entered is either invalid or it does
not exist in the Installed Base Lookups
Msg2: The Party Relationship Type (Ship To) entered is either invalid or it does
not exist in the Installed Base Lookups
x_return_status = E
x_msg_count = 2
x_msg_data = The Party Relationship Type (Ship To) entered is either invalid or
it does not exist in the Installed Base Lookups
PL/SQL procedure successfully completed.

Hi
We are in 11.5.10.2 and I already checked notes which you sent before and setups are fine as the relationship type' Ship to' having 'contacts' enabled in the setup.
I am also seeing a differernt issue as once I update existing item instnace with the status 'Return for Credit' through API, system is not allowing me to update the extended attributes through front end application manually and I am seeing a note at the end of the screen as 'Note: This item instance cannot be updated. ' and this is only happening when I update the item instance status to 'Returned for Credit' not when I create new item instances with status as 'Created'. Is this intended functionality to restrict update on extended attributes if I change the status of item instnace to 'Return for Credit' ?
Thanks

Contacts created on iPod do not sync to Exchange server. Outlook created Contacts sync to iPod correctly.

I have an iPod Touch 4th gen (model MC544LL), running iOS 5.1.1
My Contacts and email synchronize with the corporate Exchange server of my employer.
I use Outlook 2007 (Windows) on my Desktop.
If I create a contact in Outlook 2007, it synchs to the iPod.
If I modify that contact on the iPod, it synchs back to the Exchange server.
All that works great.
However!
If I create a Contact on the iPod, it never syncs to the exchange server. It is only available on my iPod.
I do not see contacts in Outlook, that were created on the iPod.
I only discovered this today. I'm not sure how many contacts I created on the iPod that do not exist in Outlook. (I have hundreds of contacts).
It is a most vexing problem. I hope that someone may have a solution.

Searching the site more, I found this link to be very helpful.
https://discussions.apple.com/thread/2047996?start=0&tstart=0
I did not find a way to move the contact to the Exchange server directly, but I found out how to find the locally created contacts and then I could email the contacts one by one, to my Outlook email, then add them to the Exchange server contacts.

Cant create contact out of dialled number - asha31...

Similar Messages

Maybe you are looking for