Business Unit Analyst create planning round problem

In the Business Unit Analyst 2.0 (mySAP ERP 2005) portal business package when creating a planning round I can go through to the 3rd screen "Review and Save", but when I hit save the following error appears on the screen and it does not save the planning round:
java.rmi.RemoteException: Service call exception; nested exception is: java.net.ConnectException: Connection refused: connect
I am using java version 1.4.2_12-b03. The portal is NW2004s stack level 8.
Has anyone found the same problem?
Regards

Hi Sunil
Your point about the prerequisites lead me to the solution. The settings were wrong in Virtual Room settings in the Visual Administrator and the Collaboration Room Backend Properties in the portal. These need to be correct as a virtual room is created by the system when the planning round is created.
Thanks
Fergus

Similar Messages

Offline doc : Business package for business unit analyst

Hi experts,
I'm looking for an offline doc for the business package "business unit analyst 2".
I've found the online doc <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/5e/083f403f0a9354e10000000a155106/frameset.htm">here</a>, but I want something offline, printable.
Does anybody knows where I can find that ?
Regards
Quentin

Hi Sunil
Your point about the prerequisites lead me to the solution. The settings were wrong in Virtual Room settings in the Visual Administrator and the Collaboration Room Backend Properties in the portal. These need to be correct as a virtual room is created by the system when the planning round is created.
Thanks
Fergus

Business Unit Analyst

Can we have a configureation document for +Business Package for Business Unit Analyst+
Regards,
Sujana

Hi Sunil
Your point about the prerequisites lead me to the solution. The settings were wrong in Virtual Room settings in the Visual Administrator and the Collaboration Room Backend Properties in the portal. These need to be correct as a virtual room is created by the system when the planning round is created.
Thanks
Fergus

Use of MSS or Business Unit Analyst for FICO Forms.

Hi,
Please let me know about FICO following forms:-,
1.Create Cost Center
2.Create Profit Center
3.Change Cost Center
4.Change Profit Center.
We could not get navigation for FICO forms in ESS/MSS package for Adobe Interactive forms.
It shows that all FICO forms are available under this Business Package.
From the SDN I could get information about "Business Package for Business Unit Analyst 2.0 (mySAP ERP)"
http://help.sap.com/saphelp_erp2005/helpdata/en/5e/083f403f0a9354e10000000a155106/frameset.htm
Kindly guide us on the FICO forms issue. Use of MSS or Business Unit Analyst.Please let me know also whether it is not adviced By SAP to use Profit center in Portal.
Thank you,

Solved

Downloading Business Package Business Unit Analyst

Hi All!..
I'm trying to download from SAP Service Marketplace the Business Unit Analyst Business Package, but when I open the zip that contains the package it only has an SCAN FILE, do any of you know what's happenning here? Do any of you has the actual version of this BPs...??
Thanks in advance!!!...
Maria

Hi Maria,
when you say scan file, do yo mean an file called BPERP4BUA0.sca? If so that is correct. In EP6, the archive files you import are SCAs. Just specify the sca file on the import screen when you go to bring in the BP.
Hope this helps.
John

Elimination Business Units and being able to manually journalize to them

Elimination Business Units are created and marked as consol only under general ledger definition. The assumption based on functionality in previous version of PS including 9.0 and 8.9 is that business units marked as consol only can only be used by the consolidations process. During unit testing, user was able to successfully manually create a journal entry and book to the elimination business unit. Is this a defect or a feature change? If this is a feature change and business user has a requirement that elimination business units can not be manually booked to, how can I meet this requirement?

Hello Brad.
Don't know how you had trouble with any attachments being embedded in a Mail.app message prior to Tiger Mail since all Mail.app versions prior to Tiger Mail didn't support composing or sending HTML formatted messages including when forwarding a message received that was composed in HTML.
If the recipient is accessing the email account via webmail, doubtful it is the computer having this problem. Non-image/photo type attachments should not be available in the body of the message when a recipient accesses the account via webmail regardless that all attachments appear in the body of the message when sent by Mail. The same when a recipient uses Outlook or Outlook Express when receiving non-image/photo type attachments such as Excel, Word or PowerPoint attachments. These type of attachments appear in an attachments only area below the message header and the same with image/photo type attachments that may also appear inline or viewed in place within the body of the message when the message is opened by the recipient.
The recipient can try clearing the cache for the browser used but if the attachments are not available at the server when the message is received, this is a Bell South issue since the attachments are being stripped at the server when received.

How to create a new Business Unit

Hello,
I have problem.
Can anyone tell me
1 : How to create a new Business Unit, New Company from Jd Edwards screen means webpage.
2 : Can i find the User Defined Codes means UDC in jd edwards screen.
Thanks,
Shakti Prasad Priyakumar.

First, let me confirm that you are on JDE World, and not JDE Enterprise One/One World. They are very different environments. JDE World is normally a green screen, IBM Client Access based system.
If you are on a JDE World menu and you have the proper security access, just type in UDC on the command line and hit <ENTER>. You hopefully are in a test environment when you do this, since it sounds like you have very little knowledge of JDE. The UDC screen will come up. If you know the system code and code of the UDC table you want to look at, you can key them in and bring up that table. Otherwise, do F5. That will let you search by system code and see what table codes are available in each system. If you are not sure what UDC table you need, you can look at the JDE data dictionary for the data item you are interested in and that will tell you the UDC table, if the data item is UDC based.
As for setting up new business units and company, get to the main general ledger menu. Don't remember the exact path, but you want to get into the setup/define menu for general ledger accounts. There will be separate options there for maintaining companies and for maintaining business units. You want to play with this in a test environment before you do anything for real.
Hope this helps a bit.
John Dickey

Unable to Create Contract Templates In Other Business Units In Fusion Contract Management

Hi All.
I am working on Fusion PPM Release 9.
I Have set Profile Options HZ_DEFAULT_BU_CRM to SH-Business Unit & HZ_ENABLE_MULTIPLE_BU_CRM to Yes in task Manage Administrator Profile Values.
But LOV is showing only SH-Business Unit. I am not able to get other Business Units In LOV & Not able to create contract Template.
Any help regarding above issue is Appreciable
Thanks
Shaan

Hi Vara,
Check the basic settings for Student Contract accounting. Are you using "Create RFC Destination for Automatic Creation and Update" functionality? Please check that whether you have maintained any RFC or not. If yes, then remove that.
The automatic creation function causes the system to automatically create a student account with the account-specific master data when it creates student master data. Check this in SAP_CM_ACCOUNT_DATA_UPDATE.
The automatic update function causes the system to automatically update the relevant account data when it updates account-specific student master data.
You can activate and deactivate the automatic creation and change function. You make this setting in the IMG activity (De)Activate Automatic Student Account Creation and Update.
Regards
Vinod Kumar

Create a customer in several business units

Hi SD experts,
Is there any option in SAP to create a customer in several business units, simultaneously, without being obliged to do it manually ?
regards,
Bahia.

Dear Bahia,
Could you please explain whats a "Business Unit"?
As in Standard SAP terminolgy, I've not heard Business Unit.
Best Regards,
Amit.
Note: Are you reffering to Sales Area or Business Area?

Questions on setting up PeopleSoft FIN AP Business Unit for India with TDS

Hi,
Does anyone here have some advice for me on how to handle AP transactions for a business unit set up for India with TDS (withholding) and statutory reporting.
We are configuring AP BU for India in our existing database which has other BUs for other countries not using withholding. For India the way we understood on statutory is that all invoices must be recognised for withholding at the time of invoice entry or payment which ever ealiest. For PeopleSoft we always have to create voucher before we can make mayment so the earliest occurace will be at voucher entry that withholding should be deducted (at voucher post).
The problem that we are encountering is that if we have prepayment invoice, we can use prepaid voucher to record this. However, when we receive the final invouce and entered into PeopleSoft the voucher post reversed the original withholding lines and recreate in the final invoice with final invoice amount. This could be in different period. As for the India rule the way we understood this is that the entries that created at prepaid should not be reversed, also those withholding might already be paid to the goverment in prior period before receiving the final invoice. The final invoice should have withholding calculate just for the difference of the invoice balance.
Our other problem is on the statutory reporting that all transactions should be recorded in that particular period. Our current setup has AP close period at the end of each month which means we cannot enter invoices raised in previous period or have adjustments put in the period that already closed.
Any help and advice on how companies that has India AP business unit deal with the above mentioned issues are much appreciated.
Thank you.

Thanks Marc Sachdeva.
I don't mean where to set up withholding. I have alredy configured all withholding details and everything works fine in AP.
However, as India statutory comes in, I'd like to know how other companies handle cases like accounting entries for transactions in specific period if your system has AP/GL closed periods. Normal cases would be put entries in the next accounting period. But as my understanding on the Indian rules is that withholding must be recorded at the time of entering the invoice. So how should adjustment be made.
Another thing is the prepayment invoices, using PeopleSoft Prepaid voucher would cause the accounting entries for withholding lines to be reversed and then re-recorded when posting the final invoice (that matches with the prepaid). I would like to know how companies are dealing with such case as the TDS lines could be revsersed and recalculate in different accounting period. Also if the period that it revsered the TDS % could have changed and when the reverse happens it will recalculate withholding based on the new rate for the whole of invoice amt.
For example an invoice of 10000 INR, 50% is to be recorded and paid in advance so raise the invoice of 5000 INR in Feb. TDS is 10%.
- So vendor will be paid 4500 and 500 is for withholding.
- In April then receive final invoice of 10000 INR, record into PS as 10000 but matched to prepaid so the remaining invoice is 5000. withholding rate in Apr is now 15% so 15% should be applied to the remaining invoice of 5000 INR. As the prepaid voucher option reversed withholding lines and recalculate with final invoice total so the withholding to be deducted is calculated at 15% = 1500 (10000 * 15%).
- As the prepaid invoice withholding might have already been paid in March before the rate changed, the final invoice should have withholding of 750.
I'm not sure if my understanding of recording withholding for India is correct and whether it really needs to be recorded in the month that invoice is raised. As the way I understood and have been told it has to be recorded in that month. I.e. invoice received on 30 April must be entered into accounting period of April. Our business close AP/GL about a week before the end of month so if we receive invoice on 30th April but our AP/GL already closed on 25th Apr then 30th Apr invoice should go to May accounting period. As statutury requirement is to record this into April. How does anyone handle this?
Thanks.

Sufficient stock but MRP create planned order and purchase requisition .

Hi Expert,
After MRP run planned order and purchase requisition created . but the problem is for child material sufficient is there but still PR and plnd order is created .
MRP type PD, LOT size EX,Strategy group 10, for testing purpose I made safety stock 0, min lot size 0 , max lot size 0.
I cant find the cause why MRP create PR and Pland order for the material which has sufficient stock. Please help.

Dear Anirban
could you check the following master data value:
Lot size -> MB Monthly ( only for test)
Rounding value -> null
Strategy 40 MTS.
You can try with this setting in order to figure out what is the problem.
You can check also orizzon planning and re-scheduling (set to 999).
Let me know if i have been useful for you
Daniele

Multi-tenancy for a seperate business unit

Apparently, we can't do multi-tenancy with SCSM 2012 R2 (see link below). We'd like setup SCSM for one of our business units, but we don't want any of their stuff mingling with our IT stuff. It looks like we'll have to create a
new Management Group. Is it possible to create a new Management Group on the same server as our current IT Management Group, or do we need a new server ?
https://social.technet.microsoft.com/Forums/systemcenter/en-US/0891a803-c5f6-4e21-9958-ea4adc2381c6/scsm-2012-multitenant-architecture
Also, to save some work, is there a way to export settings (eg. for the connectors) from our current IT Management Group to the new Management Group ?
Thanks

Hi,
as per Microsoft Definition "The Service Manager management server and its associated Service Manager database make up a Service Manager management group." This means, that if you need additional Service Manager Management Groups, you have to install
additional servers.
I find it very handy, that you can leverage a single data warehouse Management Group and centralize your reporting if you register your many Service Manager management groups with a single data warehouse management group:
"In your enterprise, you might create multiple Service Manager management groups. You can centralize reporting for multiple Service Manager management groups by registering multiple Service Manager management groups with a single data warehouse management
group."
Source:
Planning for System Center 2012 - Service Manager Deployment
https://technet.microsoft.com/en-us/library/hh519640.aspx
About exporting your settings...They should be stored in management packs, which you can import in the new management group. About the connectors - you have to recreate them in the new environment and this shouldn't be a big administrative effort. It will
take probably not more than 30 Minutes to recreate all possible connectors.
I hope I could help you further.
Best Regards,
Stoyan

Business Unit Security Access

I have created a Child Business Unit that has a Parent Business Unit. The Child Business Unit has a team associated with it. The team has members that are all in the Business Unit.
I have restricted access in the security role so that Read access on Entity A is set to Business Unit.
My problem is that when a User from the Busines Unit I have created views the entity they can Read records of people in the Parent Business Unit but I only want them to see records for the Child Business Unit which they are a member of.
Anyone know how to resolve this?
Thanks.

If the issue is with a user from the child BU seeing records in the parent business unit, it is likely a security role issue and you may wan to check the users' security role. In CRM, if more than one security role is being compared (and in this case there
are at least 2, 1 with the team, and the other with the user record) the role with the highest privileges will be taken. Not the most restrictive as some people may think. So my guess is that the user security role has org level read privileges.
You may also consider checking of there is any sharing being done with the record in the child business unit. A user could have easily shared a large chunk of records with one or more users in the parent business unit. If this is the case, you
will need to unshared them one at a time which is time consuming. You may also find a third party tool on Codeplex that will do the unsharing or you may be able to create a console app if you have someone with coding skills.
If the issue is with user seeing related records to the entity, such as seeing emails (that they shouldn't see) of others related to the an account record (that they are allowed to see) for example, this could be the result of inheritance.
I have seen this before going back to CRM 4.0. There is an older document for CRM 4.0 that covers this in depth. I don't have it on hand, I haven't reviewed it in at least 2 years, and I'm not sure if they have anything updated for the
newer versions. Not sure it this applies, since it sounds like the issue is with lower business units seeing parent BU records.
Jason Peterson

Linking Corporate cockpit and Business Unit Cockpit

hi all,
Our requirement is to create Management cockpits for Corporate and Business unit : providing a picture of overall situation in corporation as well as in its strategic business units.
The user should be able to move from aggregated figures for the entire group to the detailed information on each stategic business units.
My problem is how should i link Corporate Cockpit with Strategic Business Unit Cockpit so that the user would be able to move from aggregated to detailed information ?
Thanks in advance for suggestions.
regards,
Yogesh

Hi,
Q no 1:
Sourcing Cockpit is an area from where you can source the requirements..There are two ways by which sourcing can be done.
1. The Purchase requisiton created from ECC 6.0 can be pushed to SRM for Sourcing . Either direct material with Part no or
Service requirement without part number
2. The shopping cart created in SRM can be converted to sourcing.
once the requirments are flown from ECC 6.0 and SRM . in the SRM server in sourcing node--click Carry our sourcing.
you can get all the requirements.
From this you can convert it to Purchase order,contract,Auction. Bid invitation.
Q. no 2 :Business Rule Framework.(BRF)
This is related to Workflow .From SRM 7.0 this workflow is called Process controlled workflow. Only by simple rules the
Workflow for Approval process for P.O ,Contract,Bid invitation can be done.
If you are SAP ABAP person they you can confugure this .Normally ABAP person will do this.. Please go to S ID and get the
details there for Business rule framework
Just check in this forum in Search you can get more details and notes
go to Google.com and enter business rule framework you get more material
check this link
http://www.sdn.sap.com/irj/sdn/nw-rules-management?rid=/webcontent/uuid/d00df7db-c783-2b10-aa97-ccfeacc19fcb [original link is broken]
Regards
G.Ganesh Kumar

Planned Value Problems

Hi everybody
hi everybody
I will
thank any help.
I have a Schedule with Resource
Labor and budget quantity distribuited in manual curve
resource (future period bucket), my baseline is definided
in this way too.
Now, i want show
in Activity Table:
Earned Value
Labor Units (BQWP),
Planned Value Labor Units
(BQWS), and
Actual Labor Units (AQ) 
and my problem is this:
my
activity BBB, have 66331 Man hours distribuited in 6
months in this way 17881, 12759, 12116, 11940, 7707,
3928.
So at finish of first month my Planned
Value is 17881 Man hours but P6 show 10993 same error in
Earned Value Report, but in Resource Spreadsheet the
Planned Value is 17881.
This
problem is in each activity of my schedule, the activities
are definides like fixed duration&units. and i try
solve this problem changing % complete type at Units,
Physical and Duration, without sucessfull. 
Then, how can set P6 for calculate
Planned Value from resource curve in my baseline? 
Regards,
Henry

Dear Friends,
I was trying to solve this
problem, and make a schedule with just one activity
with one resource assignment, and the problem is
same.
I make one activity with 100 Budgeted
units, duration 181 days, scheduled early start
July/01/08. I enter manually budgeted units by month
27, 19, 18, 18, 12, 6.
 Then:
1.- Created Baseline from copy
of this schedule
2.- Start activity on
July/01/08
3.- Run Data date on
July/31/08
this current
schedule have Planned Value units=17, I don´t know
what is wrong?
In WBS i set Earned Value
Tab, for caculate Earned Value by futupe period
Bucket.
in Summary, the Planned
Value Unit and Schedule % Complete are diferent of
Planned Value Expected in Baseline.
 I hope you can help me
 Best Regards
Henry

Business Unit Analyst create planning round problem

Similar Messages

Maybe you are looking for