Cant open itunes

I cannot open iTunes on my iphone but the app store opens perfectly fine. I have tried SETTING, GENERAL, DATE & TIME and make sure SET AUTOMATICALLY is turned ON and that didnt work I have also tried turning it off and also pressing the home button and the top power/sleep button. I have also tried to turn my restrictions on and that also didnt work.  I have also tried to changed my block cookies from third parties but that was already checked off.

ya...thats kind of weird that i have to turn that off to run it. is there any other alternative that anybody knows of that could help? thanks again.

Similar Messages

  • Cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.  I have re-installed, SO many times and I still cant open iTunes.

    Hi Support,
    I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
    Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
    I have re-installed, SO many times and I still cant open iTunes.
    Please help!!

    Click here and follow the instructions.
    (98888)

  • Cant open itunes after upgrading to yosemite

    Cant open itunes on my macbook pro after upgrading to yosemite. Someone please help if they have faced similar issues.
    Thanks.

    Try Terence's instructions here  Is Iphoto gone ? i want it back!
    Pete

  • I cant open itunes please help

    i cant open itunes i get this message "itunes was not installed correctly. please reinstall itunes" and i get this error 7, and i have try to reinstall itunes over and over but every-time i try opening itunes i get the same pop-up and i dont know what else to do

    Starting to steadily work through the possibilities with that.
    Have you checked on your .NET framework as per the following document?
    iTunes for Windows: "Error 7" message when opening iTunes

  • I downloaded the new update, and now cant open itunes

    I recently downloaded the new itunes update, now cant open itunes, redownloaded atleast ten times, still cant open it all i get is an error message, reinstalled the itunes i had before the update, that wont open either, so i deleted itunes and went to redownload it, still cant open up itunes or download it

    Hello there, thumerick.
    The following Knowledge Base article addresses the very issue you're describing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I cant open itunes on computer

    I cant open itunes on computer

    I'm having the same problem.  Already followed the steps and removed the SC info.sibd file then repaired the Quicktime program.  Nothing has worked.  Should I remove the Itunes program?  I recently updated Iphone and synced iphone and ipod now cant open itunes at all.  No error message.  The icon thinks a moment then does not open.

  • I installed itunes11 on windows 7, i cant open itunes

    Help emergency
    I installed itunes 11 on pc windows 7 , and then i cant use i tunes, i cant open itunes,
    i followed the process and uninstall all, and re install again  and no solution
    pat

    In regards to iTunes content, an iPhone can be synced or manually managed with music and video with an iTunes library on a single computer only, and photos can be transferred from a single computer only. When transferring iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first.
    You need to decide which computer you want to transfer iTunes content and photos from. If this will now be your computer at work, you will need to transfer your iTunes library and your photos from your Mac to your PC. You can transfer your iTunes library from your Mac to your PC at work following the instructions included with this link. This will make the iTunes library on your PC at work identical to your iTunes library on your Mac at the time it is transferred from your Mac. You will also need to authorize your PC at work with your iTunes account with iTunes - the same iTunes account used on your Mac.
    http://support.apple.com/kb/HT1751

  • I cant open itunes cause quick time failed to initialize (error - 2096)

    i cant open itunes cause quick time failed to initialize (error - 2096)

    hmmmm.
    doublechecking something before proceeding ... are any boxes ticked in the Compatibility tab for your QuickTime?
    (i've seen that message produced when some of the Display Settings boxes in there are ticked, not just the compatibility mode one.)

  • TS2380 It's says I have error code (13014) but I cant open iTunes or get on the internet

    It's says I have error code (13014) but I cant open iTunes or get on the internet

    "Extended" network means your phone is picking up towers from another carrier that Sprint has an agreement with. Long story short, Sprint does not have adquate coverage in the area where you are located when you see "extended".

  • I get a message MSVCR80.dll is missing reinstall itunes which i did but i keep getting the same message and cant open itunes at all

    i get a message MSVCR80.dll is missing reinstall itunes which i did but i keep getting the same message and cant open itunes at all

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't normally affect its library, but that should be backed up anyway.
    (99134)

  • I cant open ITunes because of QuickTime

    Hi, I am really hoping someone can help me! I cant open ITunes, every time I try a message pops up stating 'Itunes requires QuickTime 7.5.5 or later' but i have now downloaded QuickTime and installed 3 times and it still isnt working! Please help community! This is my first mac and im itching to get stuck in!

    I am having the exactly same problem with my recent installation of update for Itunes 5.0 and Quicktime 7.
    when trying to download Quicktime 7 separately I get Error 1402 followed by Error 1603.

  • Cant open itunes on android

    I cant open itunes on android tablet

    Hi,
    Yes you can't open itunes on android tablet - it is not compatible.
    Jim

  • TS1286 cant open itunes on my computor

    Cant open itunes on my computer

    Try to open iTunes by Right Clicking > Run as Administrator..... it work for me

  • Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

    Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Mobile Device Support
         C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
    tt2

  • Cant open Itunes on PC

    cant open itunes on PC

    Hello, Hasya.
    Thank you for visiting Apple Support Communities.
    If you experiencing issues with a blank iTunes Store, I would recommend the steps in the article below. 
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    Cheers,
    Jason H. 

Maybe you are looking for

  • Problem Topology Data collection LMS 4.1

    Hi there, I have an issue with the lms 4.1 Topology Data Collection. In the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary, there are only 2 devices succeeded and 0 device fail. but I have more 500 device in state

  • Call oracle stored procedure in OLE DB Command of SSIS

    hi buddies, i try to invoke oracle procedure or some simple insert/update script in the Data Flow Transformations component -- OLE DB Command, it failed! the error occured when i used the provider: Microsoft OLE DB Provider for Oracle Error 1 Validat

  • Hi, what formula would I need to use to show current age?

    I'm not a big numbers user and have very little concept of how to use it. What I need is a formula to calculate an age in years and months based on a date of birth in a previous column. Many thanks in advance for your help. Kate

  • Exporting Clipped images for the Web... CONFUSED! ? Help ..? AI CS3

    Hi folks, I don't use Illustrator as much as I'd like, since my workflow is mostly on the web, but I'm finding it nearly impossible to export images I receive from print designers for web use. Many of these images are EPS or AI. They are clipped imag

  • Debugging LDAP queries in Security Provider

    I need to output the queries my Novell Security Provider is doing in Weblogic 9.2 to our LDAP provider. Does anyone know the setting that will turn that on? I tried turning all items in the server to debug but no luck. thanks!