Canteen configuration in the system

Dear Team,
We have canteen facility and for this we want to do the configuration in the system.
For each personnel sub area we have diff rates for breakfast and lunch deductions. Based on the count of the breakfasts and lunch system should calculate the amount for each personnel area and that need to be deducted from employee salary.
How to configure this in the system, Can anybody please suggest how to address this?
Kind Regards
Nag

Hi Nag,
My Approach is like this.
1. Create a Z Table with fields
       1. Personnel Area
       2. Break Fast Rate
       3. Lunch Rate.
2. Create an infotype with fields
        1. No. Of Breakfasts
        2. No. Of Lunches
     and this will be maintained once in payroll period.
    Important thing here is while maintaining This infotype, System should calculate the total amount for breakfasts and lunches and should update 0015 with deduction wagetype. ( Create Deduction wagetype for this).
3. Thats it, While running payroll that particular amount will be deducted from his salary.
You need an ABAPer to meet this requirement.
Hope this helps.
Pradeep.

Similar Messages

  • Visualizing SAP XI routing configuration across the system landscape

    Hi Experts
    Iam facing some challenges in visualizing SAP XI routing configuration across the system landscape (Development, Quality, Production). Basically routing is based on a field (technical target system). Depending on the environment we have different target systems (different Mainframe DB that represent the same target system) configured.
    Any word/excel/ppt/pdf templates or any comments that could help visualizing routing would be highly appreciated.
    Thanks! Santosh

    Hi Santhosh,
    If you are worrieed about how your Business Systems will change when you move from Dev to QA to PROD for the Configuration in your ID, then the answer is simple.
    You can create transport target for your Business System and so when you migrate the ID objects from dev to Qa and so on, the business Systems will be automatically replaced.
    Take a look at this blog,
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Regards,
    Bhavesh

  • Managing Consumer Proxies and related configuration in the System Landscape

    Hi,
    I have successfully created and tested the Consumer proxy in our development server.
    Scenario background: A Java Web Service has been developed and deployed on the Portal server which i am consuming in ECC6.0 in ABAP.
    We would soon need to move it through the system landscape concerning which i have the following queries:
    1. The Consumer Proxy was created with the WSDL URL of the Development Portal server. I checked the Consumer proxy and did not find any signature of the WSDL URL in the Consumer proxy object generated. Can we therefore transport this consumer proxy to QA/Production without any issues?
    2. The Logical port configuration - What's the standard used in its maintenance across the landscape? Will we need to manually do it in every system? Can this also be made generic and transported across the landscape?
    regards
    Nitesh

    Hi,
    Logical port you can create in two ways.
    One using LPCONFIG and other is using the SOAMANAGEr.
    When you create a logical port using LPCONFIG you get the Customizing transport request which is client dependent. you can move this to any land scape. Only the thing we need to do change in the port is just accessing URL.
    But the latest transaction SOAMANAGER does't give any transport number. I guess there should be a way for this too. If not then there is only one choice left is configure on each client.
    Thanks,
    Kishore.

  • Issue in triggering central alert server- (Unable to subscribe the alert which was configured in the system)

    Hello Team,
    I'm facing an issue with the alert.
    Created alert classification and alert category in the transaction "ALRTCATDEF".
    Created container for alert category and maintained the short and long text for alert.
    Assigned the particular role "SAP_BC_ALM_ALERT_USER" in the authorization subscription and the same role has been added to user in SU01 transaction.
    Setting up Action:
    In processing method the alert category has been assigned as initial value.
    I have made all the configuration to subscribe the alert.
    Issue:
    In WEB UI under the servicepro business role, The navigation bar "Work list" there is an option to "personalize alert". Once we click on that then we will be able to subscribe the alerts. But in my case the alert category is not appearing in the subscription list. It is completely empty.
    System should show the configured alert category to subscribe. But now it is completely empty row.
    Thank in advance for your help!!!!
    Thiru.P

    Hi Ravi,
    Thanks for the suggestion. Actually the server and domain all are running well. I can start and stop from the startup menus and command scripts.
    The only issue is in the Eclipse (OEPE) when I try to connect the server. However I found the solution that I need comment the localhost entry in hosts file as below.
    # 127.0.0.1 localhost
    Now the server is connecting well. However I have another issue, that I am not able to shutdown the server from startup menus. I suspect the t3 protocal and HTTP protocal related. If you have any suggestions please help me.
    Note: if still have issues then try by removing the LAN connection, or install the Microsoft Loopback Adapter.
    But I am still looking for options without commenting the localhost in the hosts entry.
    --Khaleel
    Edited by: Khaleel Shaik on Dec 8, 2010 2:58 PM

  • Output type configuration for the Goods Receipt without the PO.

    Hi,
    I have a scenario whereby I want two Smartform(s) to fire from the MIGO Transaction. It is for Goods Recepit / others . Movement type '501'. Now we have created a new output type ZWE1 and configured in the system in the Transaction SPRO as follows:
    Materials Management Inventory Management and Physical Inventory Output Detaremination Output types
    ZWE1 is configured along with the Program and the Routine name but no Smartforms has been specified since there are two smartforms to be triggered via this Z program and via MIGO based on the material type which would be decided by the Program internally.
    We have also configured the Material Output Determination and the Procedures fin the Ciondition Procedures for the Control data  ME0001 mentioning this output type without the requirement code 173.
    We have also configured the Output type ZWE1 with the Program name and the Routine in the link  Assign Forms and Program
    but somehow the Program still does not get trigerred.
    Can anyone please tell me what is the reason for this and how this Prpblem should be addressed.
    Any help on this front would be appreciated.
    Suitable eward points would be awarded if Your solution works.
    Thanks,
    Regards,
    Deepak.

    Answered.

  • How the systems pick pricing procedure in PO?

    Hi Masters
          I have deleted the pricing procedure assignment thro schema group in the configuration.But the system picks the pricing procedure RM0000.How?
    Regards
    Mohan

    Hi
    Thank you for your replies
      I have maintained blank entries of shema group for the purchasing organisation and vendor.And I have also deleted entries for assignment of blank entries to a pricing procedure in the  following path
    Materials Management->Purchasing->Conditions->Define Price Determination Process->Define Schema Determination->Determine Calculation Schema for Standard Purchase Orders
    ie., Schema grpPorg      Schema Grp          Procedure
            Blank                       Blank                       XXXXXX -
    deleted this entry
             01                           Blank                       AAAAA
    My question is how the systems picks pricing procedure in PO although the assignment is deleted?
    -Mohan

  • [SOLVED] makepkg / configure locks up system

    This is really a continuation of this topic. That one is marked as solved, but it's not for me and it appears that others are experiencing the same lock ups.
    When compiling through makepkg, at the configure stage the system locks up. kernel.log shows this:
    Sep 8 08:35:43 mesh kernel: [ 6570.240246] [ 3258] 1000 3258 3506 1 0 0 0 makepkg
    Sep 8 08:35:43 mesh kernel: [ 6570.240249] [ 3412] 1000 3412 3406 0 1 0 0 configure
    Sep 8 08:35:43 mesh kernel: [ 6570.240252] [ 3428] 1000 3428 2711 0 1 0 0 make
    Sep 8 08:35:43 mesh kernel: [ 6570.240254] [ 3491] 1000 3491 3406 1 1 0 0 sh
    Sep 8 08:35:43 mesh kernel: [ 6570.240256] [ 3492] 1000 3492 3406 7 1 0 0 configure
    Sep 8 08:35:43 mesh kernel: [ 6570.240259] [ 3497] 1000 3497 3406 7 1 0 0 configure
    Sep 8 08:35:43 mesh kernel: [ 6570.240261] [ 3498] 1000 3498 3406 7 0 0 0 configure
    Sep 8 08:35:43 mesh kernel: [ 6570.240264] [ 3499] 1000 3499 3406 7 1 0 0 configure
    Sep 8 08:35:43 mesh kernel: [ 6570.240266] [ 3500] 1000 3500 3406 7 0 0 0 configure
    Sep 8 08:35:43 mesh kernel: [ 6570.240269] [ 3501] 1000 3501 3406 7 0 0 0 configure
    <-snip, all the way down to->
    Sep 8 08:35:47 mesh kernel: [ 6570.242780] [ 4502] 1000 4502 4934 1400 0 0 0 configure
    Sep 8 08:35:47 mesh kernel: [ 6570.242782] [ 4503] 1000 4503 4935 1401 1 0 0 configure
    Sep 8 08:35:47 mesh kernel: [ 6570.242784] [ 4504] 1000 4504 4935 1403 0 0 0 configure
    Sep 8 08:35:47 mesh kernel: [ 6570.242787] [ 4505] 1000 4505 4936 1404 1 0 0 configure
    Sep 8 08:35:47 mesh kernel: [ 6570.242789] [ 4506] 1000 4506 4936 1406 0 0 0 configure
    Sep 8 08:35:47 mesh kernel: [ 6570.242791] [ 4507] 1000 4507 4970 1409 1 0 0 configure
    Sep 8 08:35:47 mesh kernel: [ 6570.242794] [ 4508] 1000 4508 4970 1409 0 0 0 configure
    errors.log reports out of memory:
    Sep 8 08:41:51 mesh kernel: [ 306.358181] Out of memory: Kill process 1395 (plasma-desktop) score 22 or sacrifice child
    Sep 8 08:41:51 mesh kernel: [ 306.358186] Killed process 1403 (ksysguardd) total-vm:9032kB, anon-rss:4kB, file-rss:48kB
    Sep 8 08:41:58 mesh kernel: [ 306.730373] Out of memory: Kill process 1395 (plasma-desktop) score 22 or sacrifice child
    Sep 8 08:41:58 mesh kernel: [ 306.730378] Killed process 1395 (plasma-desktop) total-vm:803464kB, anon-rss:49096kB, file-rss:0kB
    Sep 8 08:42:08 mesh kernel: [ 322.648070] Out of memory: Kill process 1678 (virtuoso-t) score 16 or sacrifice child
    Sep 8 08:42:08 mesh kernel: [ 322.648073] Killed process 1678 (virtuoso-t) total-vm:208672kB, anon-rss:43624kB, file-rss:0kB
    Sep 8 08:42:13 mesh kernel: [ 329.718121] Out of memory: Kill process 1356 (kwin) score 6 or sacrifice child
    Sep 8 08:42:13 mesh kernel: [ 329.718125] Killed process 1356 (kwin) total-vm:631452kB, anon-rss:3392kB, file-rss:4164kB
    Sep 8 08:42:14 mesh kernel: [ 332.438002] Out of memory: Kill process 1412 (mysqld) score 5 or sacrifice child
    Sep 8 08:42:14 mesh kernel: [ 332.438008] Killed process 1412 (mysqld) total-vm:339192kB, anon-rss:1584kB, file-rss:0kB
    Sep 8 08:42:34 mesh syslog-ng[908]: Error processing log message: <u:
    Sep 8 08:42:35 mesh kernel: [ 343.448769] Out of memory: Kill process 1454 (nepomukservices) score 3 or sacrifice child
    Sep 8 08:42:35 mesh kernel: [ 343.448776] Killed process 1454 (nepomukservices) total-vm:570132kB, anon-rss:308kB, file-rss:0kB
    Sep 8 08:42:35 mesh kernel: [ 352.703132] Out of memory: Kill process 1482 (kio_http_cache_) score 3 or sacrifice child
    Sep 8 08:42:35 mesh kernel: [ 352.703136] Killed process 1482 (kio_http_cache_) total-vm:312872kB, anon-rss:0kB, file-rss:0kB
    Sep 8 08:42:49 mesh kernel: [ 365.412969] Out of memory: Kill process 1449 (nepomukserver) score 2 or sacrifice child
    Sep 8 08:42:49 mesh kernel: [ 365.412976] Killed process 1701 (nepomukservices) total-vm:248868kB, anon-rss:264kB, file-rss:0kB
    x86_64, AMD Athlon(tm) II X2 250 cpu, 4GiB ram, kernel 3.0.4-1, Nvidia GeForce 9600 GT, KDE. Lock-ups occurred before and after yesterday's -Syu.
    Any ideas?
    Edit: this is on my desktop. No such problem on my laptop (intel based).
    Last edited by ploub (2011-09-10 08:09:59)

    All's good with pkgtools 23-2. Great work guys

  • SAP DMS - How to do an external DMS configuration for the existing system ?

    Hi All.
    Greetings.
    Request help and understanding.
    Am new to the world of SAP. And request SOME clarity for understanding of DMS.
    We are wanting to put an external DMS server and wish to configure for the same.
    So that the load on the production SAP R/3 database is reduced.
    We are now wanting to test the same on Dev environment.
    From SDN Link :
    I understand that :
    DMS basically has a content server. which stores documents.
    That can be accessed through Web, SAP R/3 Gui , SAP Portal.
    I have gone thro various links and the following links i have found to be informative and helpful :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
    http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
    http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
    However, would like to know the following because am not getting the clarity :
    1) Is there any supported platform / compatibility guide for DMS ?
    if yes, can someone send me the link?
    2) We have oracle 11g as our for SAP R/3 backend.
    Windows 2003 server 64 bit system.
    When i check the system status on the dev server of sap.
    It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
    After much search on the SMP site,
    we finally discovered and downloaded the DMS software for unicode and / 64 bit.
    Which we saw under the maintenance components separately seen for DMS 7.0
    Now for this DMS content server which we would like to make it external for storage of documents -
    do we need to have a separate database for this purpose as a repository.
    If i run a setup of DMS - will that automatically install any default repository for this or
    will it allow me to choose any other repository for the same ?
    Can anyone advise on this.
    Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
    3) I read some thing like this on some of the SDN links :
    P40 - Integration of DMS
    P62 - R&D Document Manage¬ment and Workflow
    P71 - Document management
    What are they referring to.
    4) We would be accessing these thro web, gui, customised portal.
    This content server configuration is a bit confusing.
    5) Is SNC configuration required to be done for the separate DMS server setup.
    If yes, how to do that ? any configuration link for that please ?
    Can anyone advise on the things to do.
    Steps to do.
    What all are the pre-requisites to check, before we start the set up of DMS.
    Can anyone help me understand this whole thing regarding the DMS installation and configuration.
    Step-wise.. from the start to end.
    Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
    Many thanks for your help in advance.
    Wishing you a happy and relaxed weekend.
    Kind regards
    Indu

    Thanks christoph & pradeep kumar.
    did a few more research and atleast have come to understand that.
    DMS server installation has content server which works only with MAXDB.
    So my understanding is correct.
    And what we see as Easy DMS is a client installation.
    which probably i would look at at a later stage.
    Found this link to be a little more informative :
    http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
    I really wish. That life were to be so easy. To call a consultant and finish it off
    Wishful thinking
    thanks and cheers
    indu

  • The Apple trackpad won't except the "pinch open and close" command on Firefox version 4. It is configured correctly in the system preferences. HELP!

    I am using the Apple trackpad with Firefox version 4. The trackpad won't "pinch open and close". It is configured correctly in the system preferences. It also worked in version 3. Anyone have any suggestions?

    Do the related browser.gesture prefs on the <b>about:config</b> page still have a value set for those gestures?
    Which Firefox function should be performed with those gestures?
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

  • Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

    Hi,
    I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
    Your help is really appreciated"

    Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
    Thanks really appreciating your help

  • Trying to download icloud control panel - only getting so far.  Got message: The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.  Your system has not been modified.  To retry these operations at ltr time, pls run again.

    First time on here... so not sure if doing correctly.
    I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok).  I only get so far - 2 times I've tried it.  Keep getting message:
    The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
    Your system has not been modified. To retry these operations at a later time, please run the installer again.
    huh?

    As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
    Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
    Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
    - Right click on "my computer"
    - Select the "Advanced" tab
    - Click on "Environment Variables"
    Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
    Or you may just go to a DOS Prompt and type the following commands:
    1 - %temp% and hit enter
    2 - %tmp% and hit enter
    to both of these commands you will get a reply such as:
    'c:\temp' is not recognized as an internal or external command, operable program or bath files.
    So by looking at the reply you can see that my temp folder is c:\temp
    The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
    I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
    IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
    Hope it helps.

  • The system encountered error before Itunes could be configured

    Hi, i can't seem to get Itunes 8 to run. Each time after the installer is launched, it has an error message that says "The system encountered error before Itunes could be configured. Your systems has not been modified. To try this application at a later time, please run the installer again."
    I am using windows vista home premium and a iTouch
    I am running out of ideas
    thanks for your help!

    me too. except now i can't delete all the programs from my computer to reinstall not happy

  • [SOLVED] Configure The System (Beginners Guide) Question

    Hello!
    I'm currently working my way through the beginners guide, from the wiki.  All going ok so far and I've reached the Configure The System section. Which is where I'm a bit stuck.
    Beginners Guide wrote:You will be presented with a menu including the most important configuration files for your system. If you want to look up the available options as stated in /etc/rc.conf just press Alt+F2 to get a shell, look it up, and switch back to the installer with Alt+F1.
    The problem I have is looking up the available options. For example, to find my locale it states I should run locale -a, however when I hit Alt+f2 and enter the command at the bash shell ([Arch Linux: /]# ) I get the following error
    -bash: locale: command not found
    When I attempt to lookup other items I'm also unable to find those (such as timezone in /usr/share/zoneinfo).
    Can anyone let me know what I'm doing wrong, I'm missing something very obvious here, but sadly I just can't work it out!
    Last edited by Laatia (2008-03-23 08:56:38)

    dyscoria wrote:
    I wouldn't skip all of the steps, particularly adding your hostname to /etc/hosts. Just fill in as much as you can, and edit the rest after you've finished installing, though I think the defaults are safe enough to have a running system.
    If you typed in 'km' and chose your locale before you ran the /arch/setup command to start the installation, it should automatically enter in the locale you selected earlier (if you press yes in the dialog box that pops up).
    Confirm this as that's what happended in this location on 2 recent install.

  • HT1926 After installing the lates version of iTunes, a bubble pops up and says, "iTunes installation complete, Error occured during installation before iTunes could be configured. Your system has not been modified.." How do I correct this?

    After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
    iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
    I did this, but this bubble keeps appearing. What do I need to do?

    Hello there, glenkram.
    The following article outlines great steps to try for troubleshooting your very issue:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for