[SOLVED] makepkg / configure locks up system
This is really a continuation of this topic. That one is marked as solved, but it's not for me and it appears that others are experiencing the same lock ups.
When compiling through makepkg, at the configure stage the system locks up. kernel.log shows this:
Sep 8 08:35:43 mesh kernel: [ 6570.240246] [ 3258] 1000 3258 3506 1 0 0 0 makepkg
Sep 8 08:35:43 mesh kernel: [ 6570.240249] [ 3412] 1000 3412 3406 0 1 0 0 configure
Sep 8 08:35:43 mesh kernel: [ 6570.240252] [ 3428] 1000 3428 2711 0 1 0 0 make
Sep 8 08:35:43 mesh kernel: [ 6570.240254] [ 3491] 1000 3491 3406 1 1 0 0 sh
Sep 8 08:35:43 mesh kernel: [ 6570.240256] [ 3492] 1000 3492 3406 7 1 0 0 configure
Sep 8 08:35:43 mesh kernel: [ 6570.240259] [ 3497] 1000 3497 3406 7 1 0 0 configure
Sep 8 08:35:43 mesh kernel: [ 6570.240261] [ 3498] 1000 3498 3406 7 0 0 0 configure
Sep 8 08:35:43 mesh kernel: [ 6570.240264] [ 3499] 1000 3499 3406 7 1 0 0 configure
Sep 8 08:35:43 mesh kernel: [ 6570.240266] [ 3500] 1000 3500 3406 7 0 0 0 configure
Sep 8 08:35:43 mesh kernel: [ 6570.240269] [ 3501] 1000 3501 3406 7 0 0 0 configure
<-snip, all the way down to->
Sep 8 08:35:47 mesh kernel: [ 6570.242780] [ 4502] 1000 4502 4934 1400 0 0 0 configure
Sep 8 08:35:47 mesh kernel: [ 6570.242782] [ 4503] 1000 4503 4935 1401 1 0 0 configure
Sep 8 08:35:47 mesh kernel: [ 6570.242784] [ 4504] 1000 4504 4935 1403 0 0 0 configure
Sep 8 08:35:47 mesh kernel: [ 6570.242787] [ 4505] 1000 4505 4936 1404 1 0 0 configure
Sep 8 08:35:47 mesh kernel: [ 6570.242789] [ 4506] 1000 4506 4936 1406 0 0 0 configure
Sep 8 08:35:47 mesh kernel: [ 6570.242791] [ 4507] 1000 4507 4970 1409 1 0 0 configure
Sep 8 08:35:47 mesh kernel: [ 6570.242794] [ 4508] 1000 4508 4970 1409 0 0 0 configure
errors.log reports out of memory:
Sep 8 08:41:51 mesh kernel: [ 306.358181] Out of memory: Kill process 1395 (plasma-desktop) score 22 or sacrifice child
Sep 8 08:41:51 mesh kernel: [ 306.358186] Killed process 1403 (ksysguardd) total-vm:9032kB, anon-rss:4kB, file-rss:48kB
Sep 8 08:41:58 mesh kernel: [ 306.730373] Out of memory: Kill process 1395 (plasma-desktop) score 22 or sacrifice child
Sep 8 08:41:58 mesh kernel: [ 306.730378] Killed process 1395 (plasma-desktop) total-vm:803464kB, anon-rss:49096kB, file-rss:0kB
Sep 8 08:42:08 mesh kernel: [ 322.648070] Out of memory: Kill process 1678 (virtuoso-t) score 16 or sacrifice child
Sep 8 08:42:08 mesh kernel: [ 322.648073] Killed process 1678 (virtuoso-t) total-vm:208672kB, anon-rss:43624kB, file-rss:0kB
Sep 8 08:42:13 mesh kernel: [ 329.718121] Out of memory: Kill process 1356 (kwin) score 6 or sacrifice child
Sep 8 08:42:13 mesh kernel: [ 329.718125] Killed process 1356 (kwin) total-vm:631452kB, anon-rss:3392kB, file-rss:4164kB
Sep 8 08:42:14 mesh kernel: [ 332.438002] Out of memory: Kill process 1412 (mysqld) score 5 or sacrifice child
Sep 8 08:42:14 mesh kernel: [ 332.438008] Killed process 1412 (mysqld) total-vm:339192kB, anon-rss:1584kB, file-rss:0kB
Sep 8 08:42:34 mesh syslog-ng[908]: Error processing log message: <u:
Sep 8 08:42:35 mesh kernel: [ 343.448769] Out of memory: Kill process 1454 (nepomukservices) score 3 or sacrifice child
Sep 8 08:42:35 mesh kernel: [ 343.448776] Killed process 1454 (nepomukservices) total-vm:570132kB, anon-rss:308kB, file-rss:0kB
Sep 8 08:42:35 mesh kernel: [ 352.703132] Out of memory: Kill process 1482 (kio_http_cache_) score 3 or sacrifice child
Sep 8 08:42:35 mesh kernel: [ 352.703136] Killed process 1482 (kio_http_cache_) total-vm:312872kB, anon-rss:0kB, file-rss:0kB
Sep 8 08:42:49 mesh kernel: [ 365.412969] Out of memory: Kill process 1449 (nepomukserver) score 2 or sacrifice child
Sep 8 08:42:49 mesh kernel: [ 365.412976] Killed process 1701 (nepomukservices) total-vm:248868kB, anon-rss:264kB, file-rss:0kB
x86_64, AMD Athlon(tm) II X2 250 cpu, 4GiB ram, kernel 3.0.4-1, Nvidia GeForce 9600 GT, KDE. Lock-ups occurred before and after yesterday's -Syu.
Any ideas?
Edit: this is on my desktop. No such problem on my laptop (intel based).
Last edited by ploub (2011-09-10 08:09:59)
All's good with pkgtools 23-2. Great work guys
Similar Messages
-
Steps to configure R/3 system to Portal implementation
Hi
Please provide steps to configure R/3 system to Portal implementation
when i m opening standard iview in ESS in portal i m getting following runtime error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'SAP_R3_SelfServiceGenerics_MetaData' in the SLD. No such JCO destination is defined in the SLD.
Please help
ThanksHello Bhupinder Singh,
To use ESS/MSS services in Portal follow the following Steps
Maintaining jCo Connections
Use
jCo connections are used in iViews to connect directly to a backend. They are delivered with the portal content and must be activated (configured to access a specific system).
jCo connections have two parts: one with <jCo name>, and the other with suffix <jCo Name>_MetaData. The first one transfers user-specific data within the scenario; the other transfers only the needed metadata. For the jCo with name <jCo name>, SAP Logon Ticket is recommended as an authentication method. For the metadata connection, a user ID and password is needed. A system user created before is sufficient.
Procedure
Within this guide we generically describe the step-by-step procedure for an example connection set. Perform all steps for the following jCos:
u2022 SAP_R3_Financials / SAP_R3_Financials_Metadata
u2022 SAP_R3_HumanResources / SAP_R3_HumanResources_MetaData
u2022 SAP_R3_SelfServiceGenerics / SAP_R3_SelfServiceGenerics_MetaData
u2022 SAP_R3_Travel / SAP_R3_Travel_MetaData
u2022 SAP_R3_SelfServiceGenerics_MetaDataFIN
1. Open the Web Dynpro Tool Applications overview page of your SAP NetWeaver Application Server Java: (http://<host>.<domain>:<port>/webdynpro/welcome)
2. Select the Content Administrator link (or use a direct link, such as http://<host>.<domain>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer) and logon with j2ee administrator rights
3. Choose the Maintain JCo Destinations button.
4. The available jCos are displayed with a red light, indicating that they are not yet maintained.
5. In the JCo Destination Details iView, choose the Create button for the jCo you want to create.
6. In Guided Procedure Section 1: General Data, make the following entries:
Field name User action and values Note
Name <jCo_Name> or <jCo_name>_Metadata Do not change the client number (for example, 100)
Maximal Pool Size <keep default value>
Maximum connections <keep default value>
Connection Timeout (msec.) <keep default value>
Maximum Waiting Time (msec.) <keep default value>
7. Choose Next.
8. In J2EE Cluster, make the following entries:
Field name User action and values Note
Use Local J2EE engine <SID> on <host> Selected Keep default values
9. Choose Next.
10. In Connection Type u2013 Data Type, make the following entries:
Field name User action and values Note
Data Type Dictionary Meta Data Dictionary Meta Data selected for <jCo_name>_MetaData; Application Data selected for <jCo_name> maintenance
Destination Type Load-balanced Connection (recommended) For Dictionary Meta Data Connection, the value cannot be changed
11. Choose Next.
12. In Msg. Server Connection, make the following entries:
Field name User action and values Note
Message Server <select message server for your SAP ERP HR system> The values are taken from the technical system list of the SLD
Logon Group <select logon group for your SAP ERP HR system> The values are taken from the technical system list of the SLD
13. Choose Next.
14. In Security u2013 User Authentication, make the following entries:
Field name User action and values Note
Used Method <if using <jCo_name>, select Ticket>
<if using <jCo_name>_Metadata, value cannot be changed>
Name <enter connection user name> For example, rfcsysuser
Password/Confirm Password <enter a password>
Language English
SNC Mode Off For more information on SNC Mode, see the SAP NetWeaver 7.0 Help.
15. Choose Next.
16. In the Summary step, verify your settings, then choose Finish. The system displays a positive status message.
17. In the JCo Destination Details iView, choose the Test link. The system displays a positive status message.
If the test fails, try to ping the ABAP system using the URL link. Check your settings, especially SLD, and certificate upload.
Let me know weather your problem solved or not.
Please reward points if helpful
Please close the thread if problem solved
Thankyou,
Regards
Vijai -
Error in ODI while configuring ERPi Source system
Hi All,
Hyperion Version : Hyperion 11.1.2.1
OS: windows 2008
I'm getting the following Error in ODI while configuring ERPi Source system in workspace.
"942 : 42000 : java.sql.SQLException: ORA-00942: table or view does not exist
java.sql.SQLException: ORA-00942: table or view does not exist "
can anyone guide how can achieve this. thanks in advance.
Regards,
RaviHi All,
Please find the below error log from ERPi configurator [Workspace] and let me know further steps to solve this issue....
ERPI Process Start, Process ID: 71
ERPI Logging Level: DEBUG (5)
ERPI Log File: C:\Windows\TEMP\2\/aif_71.log
Jython Version: 2.1
Java Platform: java1.4.2_08
COMM Create Process Detail - Create Process Detail - START
COMM Create Process Detail - Create Process Detail - END
Error in Start PS HCM Setup Source System
java.lang.Exception: The scenario did not end properly.
at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
ERPI Process End, Process ID: 71
Thanks
Ravi -
hai friends,
i know the lock box system in general terms, but i need to now how to configur in r/3 wat is the flow of lock box systm pls help me out, i ma in to the supporting project
thnx in advance
regards
SreenathHi
Good afternoon and greetings,
Please go through the following link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/7a/af0eba9ffa11d295d900a0c9426c73/frameset.htm
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan -
Error in configuring Windows File System Repository
Hi All,
While trying to configure Windows File system repository we are getting the following error
1. Getting this error when we give
<ip address>\<shared folder name>
Startup Error: The localroot does not exist:
10.1.100.44\Shared_folder
2. Getting this error when we give
<ip address>
Startup Error: host is unkown in file path '
10.1.100.44' - invalid network path:
10.1.100.44
Could any one help in solving this issue.
Regards,
SravanthiHi Chiluveru Sravanthi
According to the documentation, there is a difference between the path syntax for the repository manager and the network path. Did you pay attention to this difference when doing your configurations?
Network paths (Network Path)
Specifies the path to the Windows remote server.
The path consists of the IP address of the Windows remote server, and a path specification.
For example,
192.168.0.1share
Alternatively, you can enter the UNC name and path of the server, for example,
servershare.
SAP recommends that you specify the IP address, since you can then check the availability of the server more easily, using the ping command.
Note: It is not sufficient to enter the server name alone. Specifications in the form of c$ cannot be resolved either.
http://help.sap.com/saphelp_nw70/helpdata/EN/63/7f283ac3d7c54b94964931fa1b4ed9/frameset.htm
File System Repository Manager (Root Directory)
This denotes the path to the root directory in the file system to which the repository manager is assigned.
If you want to integrate documents from a Windows system, this can be a drive letter (followed by a colon) or directory path on the local server or a remote server share (for example, //myserver/myshare/somedir).
If you are running your portal on UNIX and want to access the file system on another UNIX host, you must mount the required directory on the portal server.
Example path when using a UNIX system:
/usr/company/share
The repository manager is responsible for the specified directory and all its subdirectories.
Note that multiple repository manager configurations are not allowed to have the same subpath in their Localroot parameter.
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Best regards,
Martin Søgaard -
Configuration locked by user in fusion middleware enterprise obiee 11g
Hi All,
one of my team member locked the configuration and forgot to release the lock.when i login to the fusion middleware i m getting warning configuration locked by User.
Please help me to solve the issue.
Reply ASAP.
Thanks and Regards
Kiran.I have cleared the tmp Folder under the Admin Server Directory and restarted the server..but still facing the same error..How to resolve the error *"oracle.adf.share.security.authentication.AuthenticationServlet"*
-
The maximum report processing jobs limit configured by your system ...
Hi,
I'm a developer with WXP, VS2003 and CR2008, Framework 1.1.
I have a message from my server (W2003): "The maximum report processing jobs limit configured by your system administrator has been reached":
What's the matter?
The server has installed redistributable of CR2008.
Thanks.I solved it in Page Unload, doin' this:
private void printReports_Unload(object sender, System.EventArgs e)
CrystalReportViewer1.Dispose();
CrystalReportViewer1 = null;
if((reportDocument1 != null) && (reportDocument1.IsLoaded))
reportDocument1.Close();
reportDocument1.Dispose();
Then, I stressed webapp with WAPT 4.0, and everything works perfect.
Do you advise me to change too keyreg?
Thanks.
Edited by: Santiago Magaña on Nov 3, 2008 9:47 AM -
Guys,
I have been unable to configure any adapters for Hyper-V on my Windows 8.1 Surface. Here is the error
PS C:\Users\Martin> New-VMSwitch -Name “NewSwitch” -NetAdapterName “WiFi” -AllowManagementOS $True
New-VMSwitch : Failed while creating virtual Ethernet switch.
Switch create failed, name = 'B3D5509F-6645-42F8-8917-0C9831905460', friendly name = '': Operation times out (0x80041069).
Timed out trying to acquire network configuration lock, current owner = 'iphlpsvc.dll'.
The operation timed out.
At line:1 char:1
+ New-VMSwitch -Name “NewSwitch” -NetAdapterName “WiFi” -AllowManagementOS $True
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OperationTimeout: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VMSwitch], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : OperationTimeout,Microsoft.HyperV.PowerShell.Commands.NewVMSwitchCommand
I would appreciate any help as I could not find anything online.
-MrHinsh <br /> <br /> Principal Consultant | naked ALM Consulting <br />Hi,
Have you tried to restart Ip Helper service for testing?
Considering if the related DLL file was corrupted or blocked, you can test in Clean boot.
Also run SFC /scannow command as admin to scan your system, if any file was failed to repair, post back the CBS.log for our research.
Kate Li
TechNet Community Support -
Error configuring a Managed System
Hello everybody
When I try to configure a manged system in SMD I get this error in the SSO configuration:
Failed to access RFC meta data of ADD_TRUSTED_TICKET_ISSUER on ABAP Host=xxx.yyy.net sys=00 client=550 admUser=job_admin rfcUser=job_admin gwHost=xxx.yyy.net gwPort=3300
Does anyone know what this error means and how to solve it?
Solution Manager version 701
Thank you in advanced.
Best regards
RubéHello
These are our installed SP:
SAP_ABA 700 0017 SAPKA70017
SAP_BASIS 700 0017 SAPKB70017
PI_BASIS 2005_1_700 0017 SAPKIPYJ7H
ST-PI 2008_1_700 0000 -
SAP_BW 700 0019 SAPKW70019
ST-A/PI 01L_BCO700 0000 -
And the function was:
ADD_TRUSTED_TICKET_ISSUER
Hope this help you
Best regards. -
Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS. This unit should be joining a Windows Server 2008 R2 network and needs to be shared with all users. This unit will replace a File server running Win 2003 SP2.
Message was edited by: Hermann Koster
Thank you very much for your reply. The idea is to decommission the Windows file server which is running Windows Server 2003 SP2 operating system but is not running as a DC but just a member server. All this server is doing is providing file server services so my idea is to replace it with the NSS 324 box. My only concern is that when my NSS joins the domain all my users would be able to see and access network shares transparently, the same way they saw the former W2003 file server. After I transferred the data from File server I will use the same for NSS that was used for file server as well as same IP address and folders path as before.
Any suggestions or advice?
Once again thank you very much for your reply.
Cheers,The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!! -
Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace: at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace: at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====Have you installed AppController on the same machine with VMM?
-
First time on here... so not sure if doing correctly.
I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok). I only get so far - 2 times I've tried it. Keep getting message:
The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
huh?As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
- Right click on "my computer"
- Select the "Advanced" tab
- Click on "Environment Variables"
Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
Or you may just go to a DOS Prompt and type the following commands:
1 - %temp% and hit enter
2 - %tmp% and hit enter
to both of these commands you will get a reply such as:
'c:\temp' is not recognized as an internal or external command, operable program or bath files.
So by looking at the reply you can see that my temp folder is c:\temp
The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
Hope it helps. -
After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
I did this, but this bubble keeps appearing. What do I need to do?Hello there, glenkram.
The following article outlines great steps to try for troubleshooting your very issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
How to configure a Logical System for XI External System
I'm following the 'How to configure SAP XI to use the standard SAP communications APIs (idoc, pabi, rfc) from external system - How to create XI content with the Integration Builder' document.
I have everything configured, but in section 6.7 when I try to do a transaction BD10 on to send a MATMAS01 idoc using my Logical System IQS_EXTERN to my external system, it says '1 master IDocs set up ...', then it says '0 communication IDocs generated ...' and my external system does not get the IDoc. The NX7 Integration Engine does not get a message from SAP_CE8 to IQS_EXTERN.
How do I specifically configure my Logical System IQS_EXTERN to communicate with my external system via XI (NX7)?
I'm using the ICC Test-System CE8, SAP R/3 Enterprise 4.7 IDES and the NX7 Exchange Infrastructure (http://iccpi7.sap.com/rep/start/index.jsp).
Thanks,
Ed Culnane
Edited by: Ed Culnane on Oct 15, 2008 7:02 PMCheck whether you have setup Partner profile for receiving system ( Here its XI system). You need to create outbound parter profile for XI system.
Check out this forum ...
Re: trying to send Idoc using Standard Outbound Processin option
and blog ..
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Hope this will help.
Nilesh -
Vat declaration - configuration in erp system
Hello experts,
I configured elster vat declaration in PI system as described in sap note 1293294.
But what I have to configure at erp system? sap note 1293294 only describes that I have to select the Exchange Infrastructure transfer type in transaction FOTED1 in the ERP system (I could not imagine that thsi is all what I have to configure on erp side?).
I could not find any documentation regarding the configuration in erp system? can you help me?
we have PI 7.11 and ECC 6.02 System.
Thanks and best regards
Christopher
Edited by: Christopher Kühn on Nov 11, 2009 4:37 PM
Edited by: Christopher Kühn on Nov 12, 2009 9:07 AMHello,
you can find the solution to my question in sap nite 1414411 or under the link http://help.sap.com/saphelp_nw04s/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
best regards!
Christopher
Maybe you are looking for
-
Error in setting up message control in WE21...
Hello Experts, I am currently setting up the partner profiles of my new IDoc in transaction WE21(Partner profiles). Under the message control tab, I chose 'EF' under 'Application', 'NEU' under "Message type' and entered my process code under the 'Pro
-
Lost all info I had on my calendar How do I get it back?
Lost all info I had on my calendar. Doctor apps etc. One day it was there next day GONE! How do I get them back?
-
Park the incoming invoice without PO#.
Hi All, I have a issue where i need to park the incoming invoice without PO#. I found one BAPI 'BAPI_INCOMINGINVOICE_PARK', but when I checked it, It is asking for PO#. Is there any BAPI, or FM which can serve the purpose. Please help me on this iss
-
Dreamweaver MX some versions of Safari displaying menu bar incorrectly
I am updating my website, built with Dreamweaver MX, running on a Power Mac G5 Using Dreamweaver MX on a power mac (non intel) running 10.4.11, when I test the pages in safari and explorer (older versions for that particular OS) everyhing works fine
-
there's no option to install the CC product. What's the deal?