Capacity leveling ..strange behaviour
When I try to execute capacity leveling from the interactive screen....On the first click it does not level completely ..it levels couple of periods...may be ...
And after some 4-5 iterations ( 4-5 clicks on capacity levelling button) its levelling completely..that is assigning the max utilisations and removing all teh overloading
Surprisingly this problem is not there in quality eventhough we have the same settings
can yu pls let me know the things that I should check
Hi,
Are you using an user defined planning book ? Is it possible for you to exceute in the standard planning book ? If yes, please do so to observe.
Is the problem occuring for specific selection objects ( Products/ locations) ?
Please make sure you are doming capacity levelling and that time , no relevant background jobs are running or users are not working on some of your data objects.
Regards
Datta
Similar Messages
-
Strange behaviour from new 2012R2 in old domain
Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb).... -
Strange behaviour of Removal of Alpha for Info object in Quality system
Strange behaviour of Removal of Alpha for Info object in Quality system as compared to Development system.
Hi,
The data for an info object Key in the DSO was 00000000000000000000000000123. I removed Alpha for the info object and data was corrected to 123 in the DSO in development system.
Now, when i transported the info object without alpha to quality and loaded data into DSO, the data is still the same with leading zeros.
I dont want to write routine to remove leading zeros, as I have values as 0. If i write routine, all zeros will be removed and this will be blank.
Both development and quality have same patches applied and are on same level.
Why is this strange behaviour in quality system...
Any inputs?? please suggest.
Thanks.
LavanyaHi,
Did you drop and reload the data after changing the conversion?
Regards,
Raghavendra. -
Strange behaviour of .swf movies - AS2/AS3
Hello from Italy,
this is my first post and I think I need some help from the experts...
I am putting together an interactive Flash movie which is made of several different small movies. For the sake of clarity, I'll call them A.swf, B.swf, ..., Z.swf. The movies are launched from each other depending on certain buttons I've implemented.
The first one, A.swf, is actually a sort of "main menu": it grants access to all the other movies and it is also the point of return from them when a certain button is pressed.
Important: All the movies are scripted in AS3, except for the last one which, for a number of reasons, is scripted in AS2.
The return from any (but the last) movie to the first, say B.swf to A.swf, is implemented like this:
function eventResponseSole(event:MouseEvent):void {
var myLoader:Loader = new Loader();
addChild(myLoader);
var url:URLRequest = new URLRequest("A.swf");
myLoader.load(url);
sole_btn.addEventListener(MouseEvent.CLICK, eventResponseSole);
This is, of course, AS3.
The last movie, which is scripted in AS2, returns to A.swf like this:
luna_btn.onRelease = function() {
loadMovie("A.swf", _root);
The strange behaviour is this: if I launch Z.swf and navigate with the proper button up to A.swf, everything works. But if I launch A.swf, navigate to Z.swf and attempt to return, this doesn't work. There are no problems, instead, moving up and down between movies scripted in AS3, that is with the first bit of code I've pasted. My guess is that the syntax in AS2 is correct, but something stops A.swf from "launching itself" when the control is transferred to Z.swf, but the movie is launched in the original window. Is this diagnosis reasonable? And if so, would someone kindly provide a way out of this? Re-doing Z.swf in AS3 is not an option, I'm afraid, it will have to stay as it is. I also have to add I've tried some solutions by setting _lockroot, but this doesn't seem to work.
Many thanks in advance!
Marco OlivottoMixing AS2 into AS3 is not without stipulations... and I am no expert on translating those stipulations, but here is what the Flash documentation says regarding the matter... the third paragraph may be significant to your case:
- ActionScript 3.0 code can load a SWF file written in ActionScript 1.0 or 2.0, but it cannot access the SWF file's variables and functions.
- SWF files written in ActionScript 1.0 or 2.0 cannot load SWF files written in ActionScript 3.0. This means that SWF files authored in Flash 8 or Flex Builder 1.5 or earlier versions cannot load ActionScript 3.0 SWF files.
The only exception to this rule is that an ActionScript 2.0 SWF file can replace itself with an ActionScript 3.0 SWF file, as long as the ActionScript 2.0 SWF file hasn't previously loaded anything into any of its levels. An ActionScript 2.0 SWF file can do this through a call to loadMovieNum(), passing a value of 0 to the level parameter. -
I have some troubles with implementing capacity leveling. I cannot level with planned orders (cable solution), so it is only possible to plan production orders.
The setup matrix is used (because setup times can be greatly reduced, depending on the succesor).
For some operations, simular machines can be used. CM21 (work center view) is used. Version: R/3 release 4.6C.
Now a couple of problems rise.
Problem 1:
Since there are simular machines, normally production versions are used for capacity leveling. However, we have to level with production orders, so production versions are not applicable.
Making one workcenter with different individual capacities is also no solution, since SAP messes up with setup times then (i.e. two operations of different production orders have to leveled onto the work center. Normally, the setup is 20h, but if it is a right succesor, it has to be 0h. This is mentionned in the setup matrix. If we dispatch now with a specific strategy for setup time optimization, only one operation will have setup time and the other operation will be schedule from the start on of the other operation's setup... In reality, two setups has to be done, since there are two machines!).
Alternative sequences is also no solution. While leveling, the alternative sequence will never be used by SAP, in my view.
Problem 2:
The strange logic of SAP: setup of the next work center can only be done if the production on the previous work center has finished. In reality, the setup of the next work center can overlap with the production of the previous workcenter.
Besides these two problems, there are some more troubles with capacity planning in SAP. SAP messes up sometimes by putting the setup time before the wrong operation (sometimes, the first operation has no setup time and the second does. However, this should be the other way around.).
If you plan an operation manually, SAP doesn't take into account the setup matrix.
Does anyone has a solution?Hi Walravens,
What i have understood is, u have the avilability of multiple resouces to produce same material, if any capacity bottle neck, u level the different production order of same material from "one work center" to "another workcenter".
At cm21, select the mutiple workcenters (selection criteria) and dispatch the operation as need.
For setup time overlap, how to system know ur producing two operations (from two different orders) with same setup.
Even the operations from same production order, system consider the set up time of the second operations unless u define overlap function. . Am I understood your problem in correct way.
So remove the set up time for second operation and dispatch.
Regards
Pradeep -
Strange behaviour msi 7236 with e7400
Hello,
Is the msi-7236 supporting the e7XXX Intel c2d family ?
I've just switched from an e6400 to an e7400 and I've noticed some strange behaviours, mainly
the fact that the performances are the same with both processors ( and even a bit reduced with
the e7400 ! ).
Another big problem is in the bios CPU configuration section: instead of 6 options + C1E hidden features
there is only 2 + the C1E hidden features. Consequence is simple: impossible to setup Intel speedstep or
the other common options.
Additionally there is also a problem when displaying the frequency at the boot-time ( it displays 346xx MHz !)
and in cpuz, the coefficient displayed is 6 ( instead of 8 I guess for this entry level cd2 model)
As the latest msi 7236 bios is now 2 years old (v3.7), I guess this is the motherboard which is
responsible for this weird behaviour.
So anyone can help me with theses questions ?945P Neo3, bios is version 3.7, to be accurate, internal nomenclature is 'MS 7236 revision 2.2'.
With ChristalCPUID I've succeed into putting the coefficient @10.5 so now the performances of the e7400 are as I was expecting, but the bios is still initializing the CPU with the lowest coeff.
Advanced features (64 bits instructions, SSE4 ,speedstep etc) are still not recognized.
I've also noticed that the e7400 is not listed on the 'officially supported CPU list' motherboard webpage.
How can it work partially without system failure ?
Would it be possible that 45nm are supported by this (old) MotherBoard even if it's not clearly specified by MSI ? -
FOR i IN (statement) LOOP - very strange behaviour
Hello, I'm experiencing very strange behaviour in my 9i Development Environment:
If I run this select from SQL Plus a I get six month with number of days:
select to_char(add_months(trunc(sysdate,'month'),rownum-1),'Month-YYYY') tmp_date, add_months(trunc(sysdate,'month'),rownum)-add_months(trunc(sysdate,'month'),rownum-1) colspan from dual a connect by level <=6
But if I try to cycle through it in PL/SQL I only get the first row.
FOR i in (
select to_char(add_months(trunc(sysdate,'month'),rownum-1),'Month-YYYY') tmp_date, add_months(trunc(sysdate,'month'),rownum)-add_months(trunc(sysdate,'month'),rownum-1) colspan
from dual a
connect by level <=6 )
loop
-- print something out
end loop;
Any ideas why does this happen this way? If I use a query that does not contain CONNECT BY it works ok.Hi
Just change as given below:
FOR i in (
select * from (select to_char(add_months(trunc(sysdate,'month'),rownum-1),'Month-YYYY') tmp_date, add_months(trunc(sysdate,'month'),rownum)-add_months(trunc(sysdate,'month'),rownum-1) colspan
from dual a
connect by level <=6 ))
loop
-- print something out
end loop;
Regards
RK -
Roaming Profiles / Wrong permissions? Strange Behaviour...
Hi, got some problems with roaming windows profiles.
Server: XServe G5 | Mac OS X 10.5 | working as PDC
Client: Windows XP Professional SP2
1. I'm able to connect with Windows-Client to PDC, newly created folders (e.g. on Desktop)
are stored in the profile, also files / programs within this folders - when user logs off
files and folders are stored properly.
2. When I try to get the same profile at a second Windows-Client the profile could not be
loaded because of that created file within that folder (1.).
I get an Windows-Error-Message: "Error performing Inpage Operation"
That only happens because of the saved /created files in the new created folders. When I create a folder, without saving a file inside, it works without problems. Profile settings are loaded properly.
Here is the content of my samba config (with testparm) , hope that helps - I didn't make any modifications to that file manually. Would be really nice to get help with that strange behaviour.
[global]
dos charset = 437
unix charset = UTF-8-MAC
display charset = UTF-8-MAC
workgroup = SKDL
server string = skdl-pdc
auth methods = guest, odsam
map to guest = Bad User
obey pam restrictions = Yes
passdb backend = odsam
log level = 2
debug pid = Yes
max xmit = 131072
printcap name = cups
add user script = /usr/bin/opendirectorypdbconfig -c createuseraccount -r %u -n /LDAPv3/127.0.0.1
add machine script = /usr/bin/opendirectorypdbconfig -c createcomputeraccount -r %u -n /LDAPv3/127.0.0.1
logon path = \\%N\profiles\%u
logon drive = H:
domain logons = Yes
os level = 65
preferred master = Yes
domain master = Yes
wins support = Yes
usershare allow guests = Yes
usershare allow full config = Yes
usershare max shares = 1000
usershare owner only = No
usershare path = /var/samba/shares
idmap domains = default
idmap alloc backend = odsam
idmap negative cache time = 5
com.apple:filter shares by access = yes
darwin_streams:brlm = yes
idmap config default:backend = odsam
idmap config default:default = yes
ea support = Yes
stream support = Yes
use sendfile = Yes
printing = cups
print command =
lpq command = %p
lprm command =
include = /var/run/smb.conf
vfs objects = darwinacl, darwin_streams
[netlogon]
path = /etc/netlogon
write list = @admin
browseable = No
strict locking = No
[profiles]
path = /Users/Profiles
read only = No
browseable = No
strict locking = No
[homes]
comment = User Home Directories
read only = No
create mask = 0750
browseable = No
root preexec = /usr/sbin/inituser %U
com.apple:show admin all volumes = no
[printers]
comment = All Printers
path = /tmp
create mask = 0700
printable = Yes
browseable = No
----------------try using cacls to check the access control on the files and directories
-
APEX Listener and EPG - strange behaviour
Hi
For some years, I've used EPG for APEX but have struggled with performance particularly as I can have up to 150 student developers using at any one time.
I do a fair amount of work using ORDImage and have successfully developed APEX applications to upload image files and display full-size and thumbnail images.
After upgrading to APEX 4.1 (from 4.0), I decided to install APEX Listener standalone.
Before I did so I checked that my applications still worked in 4.1 and they did.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.
Configuring APEX Listener and running the same application through that DOES display the images.
So this part of the application works under APEX Listener but not under EPG.
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank page with a wwv_flow.accept URL although the image does indeed upload. Under EPG it works as expected and I get a success confirmation.
So this part of the application works under EPG but not under APEX Listener.
Has anyone else come across different behaviour depending on the mode of connection?
Thanks
Brian
[Oracle EE 11gR2, Windows Server 2008R2, APEX 4.1, APEX Listener 1.1.3]Hi Brian,
it sounds like you have both EPG and APEX Listener running on the same machine, so your problem might result from a port conflict. Note that both services use TCP port 8080 as default.
At least a port conflict would explain the strange behaviour in your case, some things working on one web server and some on the other.
Some parts of your initial post hint to that direction, e.g.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on >wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.... because the APEX Listener only interfere with the EPG if it is at least running on the same machine as your database and furthermore, if it is unconfigured in terms of ist database connection, a port conflict might be the only way it could cause anything like that.
However, if you are sure that's not the issue, please check if you see any error in the APEX Listener's log for the following action you performed:
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank >page with a wwv_flow.accept URL although the image does indeed uploadIf you actually see just a blank screen, something very bad must have happened and you should see some kind of stack trace there.
For further investigations, if necessary, it would be helpful to know how you deployed or started your APEX Listener and which JDK version you use.
For the moment, I still think the port conflict is my best guess.
You could avoid it by either changing the port for EPG (I'd not recommend that if you have other users still using it) or by changing the port for your APEX Listener.
-Udo -
Strange behaviour of Runtime.getRuntime().exec(command)
hello guys,
i wrote a program which executes some commands in commandline (actually tried multiple stuff.)
what did i try?
open "cmd.exe" manually (administrator)
type "echo %PROCESSOR_ARCHITECTURE%" and hit enter, which returns me
"AMD64"
type "java -version" and hit enter, which returns me:
"java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
type "reg query "HKLM\SOFTWARE\7-zip"" returns me:
HKEY_LOCAL_MACHINE\SOFTWARE\7-zip
Path REG_SZ C:\Program Files\7-Zip\
i wrote two functions to execute an command
1) simply calls exec and reads errin and stdout from the process started:
public static String execute(String command) {
String result = "";
try {
// Execute a command
Process child = Runtime.getRuntime().exec(command);
// Read from an input stream
InputStream in = child.getInputStream();
int c;
while ((c = in.read()) != -1) {
result += ((char) c);
in.close();
in = child.getErrorStream();
while ((c = in.read()) != -1) {
result += ((char) c);
in.close();
} catch (IOException e) {
return result;
}the second function allows me to send multiple commands to the cmd
public static String exec(String[] commands) {
String line;
String result = "";
OutputStream stdin = null;
InputStream stderr = null;
InputStream stdout = null;
// launch EXE and grab stdin/stdout and stderr
try {
Process process;
process = Runtime.getRuntime().exec("cmd.exe");
stdin = process.getOutputStream();
stderr = process.getErrorStream();
stdout = process.getInputStream();
// "write" the parms into stdin
for (int i = 0; i < commands.length; i++) {
line = commands[i] + "\n";
stdin.write(line.getBytes());
stdin.flush();
stdin.close();
// clean up if any output in stdout
BufferedReader brCleanUp = new BufferedReader(
new InputStreamReader(stdout));
while ((line = brCleanUp.readLine()) != null) {
result += line + "\n";
brCleanUp.close();
// clean up if any output in stderr
brCleanUp = new BufferedReader(new InputStreamReader(stderr));
while ((line = brCleanUp.readLine()) != null) {
result += "ERR: " + line + "\n";
brCleanUp.close();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
return result;
}so i try to execute the commands from above (yes, i am using \\ and \" in java)
(1) "echo %PROCESSOR_ARCHITECTURE%"
(2) "java -version"
(3) "reg query "HKLM\SOFTWARE\7-zip""
the first function returns me (note that ALL results are different from the stuff above!):
(1) "" <-- empty ?!
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
the second function returns me:
(1) x86 <-- huh? i have AMD64
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
horray! in this version the java version is correct! processor architecture is not empty but totally incorrect and the reg query is still err.
any help is wellcome
note: i only put stuff here, which returns me strange behaviour, most things are working correct with my functions (using the Runtime.getRuntime().exec(command); code)
note2: "reg query "HKLM\HARDWARE\DESCRIPTION\System\CentralProcessor\0" /t REG_SZ" IS working, so why are "some" queries result in ERR, while they are working if typed by hand in cmd.exe?ok, i exported a jar file and execute it from cmd:
java -jar myjar.jar
now the output is:
(1) "" if called by version 1, possible to retrieve by version 2 (no clue why!)
(2) "java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
(3) C:\Program Files\7-Zip\
so all three problems are gone! (but its a hard way, as i need both functions and parse a lot of text... :/ )
thanks for the tip, that eclipse changes variables (i really did not knew this one...) -
Report S_ALR_87013542 strange behaviour
Hi All,
Report S_ALR_87013542 - Actual/Comm/Total/Plan in COAr crcy - is showing up cross signs in some of the columns.When the cross sign (like any other column value) is clicked the line item detail are sown correctly.
Has anybody encountered this kind of issue before ?
I googled and searched various forums but all in vain.
Please provide inputs to correct this strange behaviour of Report S_ALR_87013542. Thanks!
Regards
DevHello Dev,
Did you execute report RKACOR04 for the affected object number and checked if this still happens ?
Suresh Jayanthi. -
View Master mode strange behaviour with jpg files
Hy all,
I'm using Aperture, and I'm tweakin a lot the SW to discover all secrets ....
I'm really concerned about a strange behaviour of the SW in view mode.
If I open a jpg file, do not apply ANY modification, and apply the "show master" command (pressing M), there's a subtle behaviour :
*the images get sharper !!!!*
It behaves as if an "edge sharpening" was applied !!!!!!
With _RAW files this thing doesn't happen at all._
Even stranger, if I zoom to full definition (by pressing Z), and toggle between normal view and "show master" view, the immage remains the same !
The effect is not so evident with all images, but sometimes it is !!
Anyway, I expect not to have such kind of things with a professional SW.
With professional cameras and good quality files it's really annoying not to beeing sure what's the REAL content of the jpg image.
Has anyone noted this thing ? Is there a reasonable explanation ?
The only one I tried to figure out is the following : may be Aperture applies some kind of resampling algorithm with jpg files (bicubic, bilinear, etc).
May be this resampling is not applied with 100% magnification, as weel as with raw files.
But it's only my guessing. Now, I'm tweaking other viewers and other SW to understand what's the real jpg image stored in the file : the blurer one form normal view or the sharper one with "show master" mode.
I stress once again : of course, the jpg file I'm talking about have no settings at all, just imported and toggled with M button.
Thanks in advance.
Regards,
EnzoHy,
I'm afraid I'm not been clear.
The problem is this :
1) jpg image opened in normal view mode, no zoom, (no quick preview, of course) : image with a certain amount of blour
2) jpg image opened in show master mode, no zoom, (no quick previre, of course) : image SHARPER with respect with the previous.
No edit applied from import, so "show master" command shouln't apply any change in rendering, should it ?
The only thing I said on 100% view is that such difference (between normal mode e show mastermode) is not present with 100% magnification.
That was the issue.
Enzo -
Strange behaviour: two servers on the same port
Hi!
I hope this is the right section for this post. I need help about a strange behaviour involving a ServerSocket.
For my thesis I need to write a program that receives data from a pre-existing DSMS client, filters them and then sends them to a pre-existing DSMS server. And here is my problem: if I try to create a ServerSocket on the same port of the DSMS server, my program throws no exception, and the servers seem running on the same port. This is a behaviour that I'd like to avoid, but I cannot understand what the problem is. Can you help me?
The source code of the DSMS server can be found here (it's written in C++): http://infolab.stanford.edu/stream/code/stream-0.6.0.tar.gz
The source code of my server class, instead, is this one:
import java.io.*;
import java.net.*;
public class ThreadGenerator {
private ServerSocket server;
public void connect(String servPort, String cHost, String cPort) {
try {
server = new ServerSocket(servPort);
System.out.println("SERVER running on port "+servPort);
} catch (BindException e) {
System.out.println("Address already in use!");
} catch (Exception e) {
System.err.println(e);
try {
while(true){
Socket client = server.accept();
StreamThread T = new StreamThread(client, cHost, cPort);
T.start();
} catch (EOFException e) {
System.out.println("Server closed connection!");
} catch (Exception e) {
System.err.println(e);
}I'm programming on Mac OSX Tiger, with Java 1.5.0.
Thanks in advance for your help.The problem is still happening to me, I tried in this very moment. The code I'm using is the one I posted, and the second server is the one that I linked. I don't think there's anything else to add.
If you're sure that the problem is not in my code, then it means that it is in the linked server, which partially solves the problem. But I'd like to know, if it's possibile, if there is any other way to check if the port is already in use. -
Cursor shows strange behaviour in 10.9.5
HI,
I'm using a 15" MBPr late 2013, i7, 16 GB RAM, 1 TB SSD, running on 10.9.5. Lately I registered a very strange behaviour of the cursor when using the built in trackpad. If hovering over one of the symbols in the bar at the upper right corner of the screen and then moving the cursor downward, the menu of the symbol on the right of the cursor pops up (not the one the cursor ist pointing on).
For example: the symbol for WiFi is located left from the one regulating the volume. When hovering over WiFi and moving downwards to activate/deactivate it, the volume-controle pops up ! If I want to use the WiFi, I have to hover over the symbol for bluetooth-connectivity instead....
Any idea whats happening here ?
Help is very much appreciated !
MIchaelOK, found the solution by myself. The reason seemed to be related to the resolution of the display. Changed it to another one (no matter which one), waited for the display to change and the changed the res back to optimal for display.
The cursor now works fine and exactly....
Really weird. -
Windows 8.1 Enterprise Evaluation- Strange behaviour of network adapter
Hello there are discussions and questions around this community about network adapter dropping connection while system is running. But I have found unique problem with my network adapter driver.
I have tried to state my problem as clearly as possible. Please ask if any detail is required.
My network status shows no access on following occasions:
1. On alternate system wakeups.
eg:
a. System boots up
Internet accessible
no problem
b. I put system to sleep(first time) and wake it up
No access to internet !!!
When I check in network and sharing center not even adapter shows in disabled status.(See video from the link given below).
c. Without restarting system or without installing network adapter again, I put system to sleep again and wake it up (2nd time).
Internet accessible
d. I put system to sleep for (3rd time) and wakes it up.
No access to internet!!
If I put system to sleep again and wake it up definitly I get network access.
2. If I switch off the modem before windows shutdown completely or in the process of shutdown, next time when I boot system, even though the modem is switched on before booting the system, No internet access tooltip will be shown on network
sysbol.
Another strange behaviour is on no internet access status, I start installing adapter, and it loads required files and prompt me to click "next" and "click" install.
But the thing is before I go to "next" button, I will get network access as shown in this link
http://youtu.be/sPlXVEiYBeo. Ignore virtualbox adapter. Same behaviour was there when there is no vbox adapter. Same was happening in Windows 8 Pro, but not in windows 7, so that there is no H/W problem I think.
Any idea on how to fix this or any alternate solution ?Hi,
Firstly, access your network adapter official website to get the proper driver applied to your system.
Then going to Control Panel > Device Manager, right click your adapter > Properties. Under the Power Management tab, make sure "Allow the computer to turn off this device to save power" checkbox unchecked.
If it still persists, try to disable "fast startup" as below steps:
1.In Control Panel, open the Power Options item.
2.Click the Choose what the power buttons do link.
3.Clear the Turn on fast startup (recommended) check box.
4.Click Save Settings.
Karen Hu
TechNet Community Support
Maybe you are looking for
-
Specify image for a pop-up LOV in a tabular form?
Hi, I am using a tabular form for users to edit data. One of the fields has too many options to use a select list, so I have to use a pop-up lov (query based)... grrrr The lov shows up in my form as [Field value]List I would like to remove the text "
-
Custom class to load a webservice in flex
class allows user to load any wsdl file and user can listen all necessary events in any mxml file by heaving an object of this class.
-
How do I remove search engines I don't want in firefox
-
App store Will start to download à app, but stops directly and want run and finisch the Job. Wat to do to fix THE problem.
-
Restore Failure from Drive Image backup
I have just restored three OS partitions from backups made by Drive Image 7. My problem is that one of them failed to boot, and the follwing error messages were returned: Broadcom UNDI PXE-2.1(Build 082) v6.2.11 Copyright(c) 2000-2003 Broadcom Corp