Capacity Report for all work centers

Is there a way to get the capacity report of more than one work center at the same time(CM01)

Thanks for the useful reply.
Capacity planner groups are not maintained though.
Client uses CM07 first then selects the overall profile and then runs by each workcenter,downloads the results to spreadsheet.Repeat the same for all the work centers.
Wondering whether there could be a better way.

Similar Messages

  • Summary for all Profit Centers in the Profit Center Report

    There should be a summary for all Profit Centers in Profit Center Report. Now there is only summary by Sort Code but should be also summary for all Sort Codes.

    Alex is right if we are dealing with R/3 and thats not the way you look in BW.
    normally org. levels are not used in BW. unless you created one using ORG_LEVEL_CREATE( normally nobody does that in BW or may be I never heard of it).and that is the reason we create RSR objects. so if you look in AGR_1252
    with VARBL  $PRCTR you won't get anything.
    $PRCTR might be your custom field I guess. Identify the RSR auth. objects which has this field. you already mentioned you did that and you have 6 auth. objects.
    you might have made 0PROFIT_CTR as auth. relevant and created those 6 RSR auth.objects.
    To get the list of roles where those RSR objects getting used and the profitcenter values in those roles, I would say goto AGR_1251, and in OBJECT field give your 6 RSR objects in the multiple selection tab which you can see on  the right side  of that field. you will get the list.
    regards
    Message was edited by:
            Keerti Vemulapalli
    Message was edited by:
            Keerti Vemulapalli
    Message was edited by:
            Keerti Vemulapalli

  • Need a program that will save the capacity settings for all storage bins

    Hey all,
    I would really apprecaite any help with a program I am trying to come up with.
    What I need to do is create a program that:
    1. Will save the capacity settings for all storage bins to
    a file
    2. Then update them all to allow unlimited capacity BUT be able to revert back to the
    original that was saved.
    Any suggestions about possible existig reports that I may be able to modify to suit my needs, or where to start from if I have to do this from scratch?

    I know I'm talking about expensive apps, but having been in prepress for about 30 years now, I really don't look at anything other than Quark XPress or InDesign for page layout apps. Your printing vendor will also be much happier with you when you use these products. Some areas of the U.S. tend to be mostly Quark oriented; others, InDesign. Ask your vendor what they would prefer, and if there are any free or cheap alternative apps they'll accept documents from.
    Apple's Pages app (part of iWork) is a decent page layout program, but hasn't been updated in four years. It also doesn't support CMYK. If you place a CMYK image in the app, it will export out an RGB version of it. Not good! You can work with RGB images if you prefer, but your CMYK translations will be left to the skill of the print shop you use to do the conversions.
    Don't even think about using Word. It has what it calls a page layout option, and does pretty much work like one, but there's no good way to import it into a real layout app such as InDesign. You end up paying the printer for their time to rebuild your entire project in either XPress or InDesign so they can actually do something with it.

  • Need to run the report for All Values when Null is passed in parameter

    Hi All,
    In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
    Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
    IMP : My Database is SQL Server
    where
    (table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
    Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
    I also tried simply
    table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
    Any suggestions on how can I handle this? Any help would be highly appreciated.
    Thanks,
    Ronny

    thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
    also please share the SR number, so i can also check the same.
    can there be any other work around to this?
    thanks,
    ronny

  • Process code for Routings & Work Centers

    Hello All,
                I want to transfer Routings & Work Centers from server to server using ALE transaction <b>POIM</b>.
    What is process code for Routings & Work Centers?
    Regards,

    Hi,
    Routing
    A routing is a description of which operations (process steps) have to be carried out and in which order to produce a material (product).
    Thus in routing  contains details about the work centers at which they are carried out, standard value  and component.
    Therefore there is no limitation for assigning number of time for same work center.
    Regards
    Suresh

  • Sales document report for all open documents

    hi i need the code for sales document report for all open documents is sd
    ...      can anyone help me out.
                                     thanks in advance

    Try transaction VA05. In that choose "Open Orders" along with other selection criteria.
    If you want the Open sales order qty in output and its not displayed, do the following.
    Sales -> System modification -> create new fields ( without condition technique) -> New fields for lists.
    You can change V05TZZMO and structure VBMTVZ from there or use SE38 / SE11.
    For both you'll need an object registration in OSS.
    Hope this helps.
    Thanks,
    Balaji

  • Pull out Report for all configured Collection veriables in SCCM 20007

    Hi All,
    I have tried many ways but failed to pull out a report on collection veraiables.
    It would be great, if someone could suggest how to pull out a report for all collection veriables which are configured.
    Thanks
    Regards, Dan

    Hi,
    Check if this link helps :
    http://it.peikkoluola.net/2013/09/30/display-a-sccm-collection-variable-and-its-value/
    ~ Räjeésh M | Blog:
    ScorpITs | Please remember to 'Mark as Answer' or 'Vote as Helpful' on the post that helps. It helps others reading the thread and recognizes useful contributions.

  • Running-report-for-all-values

    Hi ,
    Based on this link i have implemented this logic....
    http://bischool.wordpress.com/2009/08/26/avoid-running-report-for-all-values-on-dashboard-when-using-multi-select-prompt/
    But for the intermediate report its taking more time to run...nearly 4min...is there any way to reduce it.
    Thanks

    hi User,
    Quick question
    Why you are giving (-1) value's as per the doc we can give any value which has to give no results? Have u tried to give some other value ?
    Next,Do u have left outer joins between those tables? If yes you should face the same problem with the main report because the filters to be same as intermediate report am i right ?
    First tune-up the rpd and get the main report query ,run-it over DB
    Due to huge data and the join taking more time....is there way any thing to add to reduce the time??Huge data ?? Intermediate report will not get any results i think it will not take more time to give a message,but due to join conditions only it is taking long time to run
    Note :Before getting value from DB it will check the where condition( joins)
    Thanks,
    Saichand Varanasi

  • Can Cisco Mars do the reporting for all devices (checkpint, ISS etc)

    Is this is true that cisco mars can do the reporting for all the devices(like checkpoint, juniper, sonicwall, and IBM-ISS ) devices.
    Requesting plz reply ASAP

    no, it's not true. the following MARS lists what mars has direct support for:
    http://www.cisco.com/en/US/docs/security/security_management/cs-mars/4.3/compatibility/local_controller/dtlc43x.html
    Anything else would require creating a custom parser, which is great functionality to have in a pinch but is a major pita to maintain. That's one of the biggest reasons to buy a SIM in the first place, so you don't have to manage parsing yourself.

  • Capacity Planning for all Sales Order Items

    Sir,
    A Sales Order have 4 different line items & need to produce on single work center.
    In schedule line of sales order requirement dates are given priority wise.
    After running the MRP I have observed that for all schedule lines, all planned ordered are starting on same date & time on the given capacity.
    I need to level it manually.
    Here I have few Question.
    1) Can Capacities are Scheduled as per priority given in SO automatically.
    2) Can revised availability dates will be reflected in SO.
    3) Which reports will be useful for understanding consolidated availability date of material for given sales order/s.
    Regards

    Dear ,
    To answer the question for Capacity requirement planning on sales order I would say that MRP does  only materials planning based on demand and reciept  but never does Capacity Requirement Plannig .MRP generates Planned Order  and susequently , production order can be genreted and farther you can carry out capacity requirement planning based on the work cente available capacity , requirement and load for those MTO orders .
    But there are SAP business suit like APO-SNP APO PPDS which carriy our details scheduleing and caapcity check based on the demand situation : Sales Order ,Independent Order  and does capcaity vaialbality chek for those demands while planning .
    Now , here is the answer of your question :
    1) Can Capacities are Scheduled as per priority given in SO automatically. : Not possible  through  SAP MRP but in APO-PPDS, APO-SNP-CTM , Herustic model .
    2) Can revised availability dates will be reflected in SO. : It can be reflected as per the ATP chekc , Replishmenet Lead  Time and re-scheduling horizon maintained in OPPQ-Carry all overall plant parametres.
    3) Which reports will be useful for understanding consolidated availability date of material for given sales order/s. : You can check through MD04/MD05 or in sales order -Availaibility check -Schedule Line -Availaibility date .
    Hope your are clear about the requirememt .
    Regards
    JH
    Edited by: Jiaul Haque on Jun 5, 2010 1:59 PM
    Edited by: Jiaul Haque on Jun 5, 2010 1:59 PM

  • Restrict creation of inspection lot for certain work centers

    Hi
    My client needs to restrict the creation of inspection lot at certain work centers although QM is active for all material processed in these work centers.
    I am using the  function module 'EXIT_SAPLQAAT_002' of QAAT0001 for this purpose. Z04 inspection type ( with Post to insp stock) is maintained for all these material.
    A different Z table is there , where material-work center combination is maintained for which no inspection lot is required.
    Logic provided so that system searches Material-Work center from production order then compares it with the Material-Work center combination with the maintained Z Table.If both found same then no inspection lot will be generated.
    But an error message (Change the inspection stock of material XXXXXX in QM only) appears for all those material while doing confirmation in CO11N . Hence system does not allow to complete confirmation for those material where QM is active.
    Please suggest if i am using the correct Exit or any further improvement is required.
    Thanks and regards
    D Mohanty

    Hi
    Actually the issue is resolved now.The problem was with coding where we were using Table-AFRU for reading prod order details.But AFRU does not consider fresh orders for which it was replaced with AFKO.
    Also the Z table must be maintained as Plant-Material-Work center combination prior to go for any order confirmation.
    Thank you all who have gone through the post , hope this will help those who have to map the same scenario at their end.
    Regards
    D Mohanty

  • Standard Report for all inspection lots

    Dear all,
    Pls guide me from where I can retrieve the data for result recorded for MIC, inspection lot wise.
    Actually currently working for Pharma company where we are using, Inspection Plan (task list type Q), with inspection point 200 u2013 Physical sample. Materials are being managed through Batches, so each inspection lot is having separate batch number.
    Now the requirement is to find a STD sap report that can retrieve us the result for a material for all the inspection lots (Batches) it have, in the report type from where I can down load it to word/excel.
    In short, the report should contain, Material, results for all MICs under all inspection lots.
    I have already tried out;
    QGP1 but it shoe the result for only a MIC at a time.
    QGA2 but not able to visualize results for all MICs at once.
    MCXB but, gives only the quantity of MICs not the results of it.
    Regards,
    Shyamal Joshi

    Hi Craig,
    The requriement is to have results for the Inspection lots only, not for the batch values.
    The report MCXD is giving the quantitative analysis for the batches, I will be very pleased if you suggest me any report that gives me the results (values entered during result recording) of these MICs, inspection lot wise, just as the MCXD give quantitative.
    I think the term BATCH is creating confusion, that is Y u have suggested me CL03N, but as I have mentioned eariler also, currenlt working with Pharma company, where each manufacturing lot is give a batch number, (in sap terminology the Batch management function, MSC1N), that is why i freauently used BATCH. Sorry for that communicational error from my side, and I am very much thank full to you for your each valuable comment, suggestion.
    Regards,
    Shyamal Joshi

  • CATA for all cost centers

    Hi experts!!
    I have the following problem:
    t-code CATA works just fine if we select the cost centers one by one, but it dows not work if we do not give any cost center on the selection screen, so that it selects all.
    Any ideas????
    Please help!!!
    Thank you all in advance!!!

    Hi,
    Yes, in CATA no need to select cost centers, once you run this t code , if you have any entries for that cost center it will run for that all cost centers and posted hours to that Cost center.
    Try it it may help.
    Thanks

  • How to generate a report for all Analyses which conatins a specific column

    Hello Experts
    I am trying to generate a report of all Analyses which contains a specific column. We are currently using OBIEE 11.1.1.7.0.
    I have tried to use the command line options using ./runcat.sh, but did not find any arguments that can filter the analyses by a specific column used.
    Any help is much appreciated.
    Regards
    Rakesh 

    Hi Rakesh,
    SampleApp has your answer: everything is available for free, just copy/paste and run on your own instance.
    http://slc02ojw.oracle.com:7780/analytics/saw.dll?Dashboard&PortalPath=%2Fshared%2F10.%20Lifecycle%20and%20Admin%2F_port…
    (as long as this instance will be up...)
    In the dashboard named "10.31 Webcat Analysis" you have a columns to analysis report where you select the presentation column and you get all the reports using it.
    This dashboard require a script to be run on your catalog, it will parse it and extract all the column info (and many other interesting things) and load it in a database. The scripts are simple and well documented, so you can easily adapt them to your own environment.
    If you want the script there is no miracle solution: download SampleApp and extract it (it's not small, but with all the great content it has we can't complain about that ...).

  • Can we take standard report for all sales orders based on the condition typ

    Hi all,
    Based on the condition type, we need to take a report for sales orders on the particular date.
    Thanks and Regards.....VM

    Hello again.
    Searching for a solution, I found a Logical Database for sales orders, that have all the information that you need.
    Using like reference the post of Bhagavatula, in the same transaction SQVI you can use, instead of the suggested join, you can select a logical database called VAV in Data source.
    This logical database links the tables, VBAK, VBAP, VBUK and KONV that is the central point of the question.
    You can list the information of logical database using the transaction SLDB.
    In 'Logical Database' inform VAV.
    Press F8 to list all the fields.
    More information about logical database in:
    Link: [SAP Logical Database|http://help.sap.com/saphelp_46C/helpdata/EN/9f/db9b5e35c111d1829f0000e829fbfe/content.htm]

Maybe you are looking for