Captivate 5.5 Template -- Settings for Demo and Training modes

Hi
I am trying to create a Captivate 5.5 template for our simulations which will be captured in both Demonstration and Training modes.
In the template file, I go to Edit > Preferences > Modes, select the both the modes (from the drop-down list) and make required settings, and save the template.
Now, when I try to record a new project based on this template, I am asked to select any one of the modes. As a result, I get only one type of output. How to get both modes in one go? Is there a workaround?
Thanks for your help.

You'll need to add your simulation capture slides to the template AFTER capturing the two outputs. The template can only really be used as a shell to add introduction and conclusions, as well as quizzing etc.
Since (as Lieve points out) you end up with separate files for each different output, you'll also need to use the templates to create a shell project for each different output, and then paste the slides from the captures into the shell as it were.
Quite frankly, you're better off doing things this way anyway (capturing first and then pasting the capture slides into another shell project) because in any capture project you need to do quite a bit of editing and culling of duplicates or redundant captures. It's quicker and easier to do this editing when the project file is smaller. So what I do is clean up my captures first to get down to the minimum number of slides required for the simulation, and then paste those slides into my project file generated from the template. I do the copy/paste after culling out the unnecessary slides, but before saving the capture file. That way, I always have all of the original captures as a backup in case I went too far in the culling. Only after the project has been finalised to I go back and delete the original captures.

Similar Messages

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

Make Flash Plug-In for Firefox Remember Privacy Settings for Camera and Mic Access on Local File

My company is using Flash Player to develop some kiosk-style applications to run on a standalone computer (no network connection). This computer will contain web pages containing Flash content. They will be opened from the local HD with Firefox with the Adobe Flash plug-in (v11.7.700.224). One of the applications accesses the microphone hooked up to the computer. When this application is started, it always asks for permission for "local" to access the microphone and camera. In previous versions of our system, we could click "Remember" if we did it once and that would make it so it wouldn't ask for permissions again (in this case, the Remember option isn't available, and the site settings don't even offer the Privace tab). However, in the previous case, we were running IE with a previous ActiveX Flash version (unfortunately, this approach is no longer available as we have had to switch to Windows 8 and that changes the game with IE and Flash entirely).
At this point, we have tried to use the Global Settings for "Camera and Microphone Settings by Site..." to enter "Local" as an always allowed site. This does not seem to have any effect. We also tried entering the root directory of the applications in "Trusted Location Settings", but that also seemed to have no effect.
I'm not sure what has fundamentally changed here. I think there might be some differences in the Plug-In version (compared to ActiveX), but I'm not sure what they might be or how to do the same thing as before.
Any help would be appreciated. Thanks in advance.
Torrey

Chris,
We learned that the Privacy tab (in Settings) can be found under the Flash plug-in for Firefox, but only if Firefox is running under an administrator.
Unfortunately, we haven't had much luck with the mms.cfg file. The following was used in the mms.cfg file (placed in both the %WINDIR%\SysWow64\Macromed\Flash and %WINDIR%\System32\Macromed\Flash” directories):
AVHardwareDisable = 0
AVHardwareEnabledDomain = local
AVHardwareEnabledDomain = 127.0.0.1
AVHardwareEnabledDomain = localhost
AutoUpdateDisable = 1
The AVHardwareEnabledDomain settings seem to be getting ignored regardless of whether the user is a standard user or an administrator. I also checked to make sure it wasn't just a local problem by going to a website that uses a microphone (http://www.testden.com/accent-reduction/systemcheck.htm). Adding the requested domain to the list (AVHardwareEnabledDomain = train.act360.com) still didn't bypass the allow/deny dialog box.
We know that the mms.cfg file is being read because setting "AVHardwareDisable = 1" will result in no prompt and that section being greyed out in Global Settings. I saw a post that suggested this setting was required to even make the AVHardwareEnabledDomain work, but it seems to block the local entirely and still brings up the dialog query on the internet site.
Thanks,
Torrey

I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto. My iCloud email works ok otherwise. I have check all mail settings for ID and password.

I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto. My iCloud email works ok otherwise. I have checked all mail settings for ID and password.

In the iPhoto preferences ==> accounts delete the account and re-enter it - sometimes that resolves this
Or IMHO the best long term solution is to set Apple Mail as the iPhoto e-mail client in the iPhoto preferences and use it - it has a number of advatages and has fewer problems
LN

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

Rules for importing AND preview mode

At this moment I shoot a mix of JPEG and RAW files.
I have defined two "standard" Develops settings: one for the JPEGs and other for RAWs.
The preview mode only show thumbnails so I can't see what are JPEGs and what are RAWs (the extension is not shown!). I need to apply different Develop settings for JPEGs and RAWs. I need to open a Windows Explorer Window to see what are JPEGs and what are RAWs, then select JPEGs, select the develop setting and Import. Again select RAWs and Import... This makes the import process a bit slow and tedious.
It could be desirable two new features:
1. The preview mode need to show the name + extension of the files beeing imported
2. Rules to define what Develop settings to apply to different kind of files (JPEG & RAW).
This way, I can import JPEGs and RAW in oly one step, with the correct develop settings applied.
Thanks.

Thanks Alexander:
Of course I could do that. I could do some pre-import task and some post-import task ... or more that one import process. But I think is better do do all the import work at the beginnig and in only one step.
Another point is that, when you apply a new develop setting to one or more files, LR renders the previews again. So If I import and then apply a develop setting, I'm doing an "extra" rendering (Am I wrong?). I could disable the rendering at import time, and then activate the rendering after the import, but this seems to be a slower process and, also, another extra step.
Regards.

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

Shoeb, hi.
Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.)

Regional and Language Settings for Window and BEX Style

Hi All,
When I change the Regional and Language Settings for Windows, Standards and Formats value to English (USA) the standard Style for BEX is active. For instance, input-ready cell is bordered with blue. But when I switch to Turkish this style is not active.
Additionally, I have to change Style for each Workbook one by one. How can we adopt a style to every workbook.
Regards,

Lars,
This is a setting on the 'Defaults' tab in the User Profile. This can be set when a new user is set-up in SU01, or it can be changed by each user according to personal preference in SU3. I'm sure there is a system table where these settings are stored that could probably be edited for all users, if that is desired, but I don't know which table that would be off the top of my head.
Hope this helps...
Bob

I have selected "Use custom settings for history" and pressed "OK" but it defaults back to "Remember history", how do I stop this?

I have to enable cookies in order to have an online purchase credited to my mileage account. So, I opened Firefox Tool and selected Options then Privacy. There, I changed "Remember history" to "Use custom settings for history," as, this will achieve what I am trying to do. However, when I press "OK" the box jumps back to the Privacy box and I see that "Remember history" is still the setting. What steps do I take to prevent the Privacy box from defaulting to "Remember history" when I want to change that setting to something else?

The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
"Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
Do you have a problem with the cookies?
You can inspect and manage permissions for the domain in the currently selected tab via these steps:
*Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
*Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Master/Slave settings for HD and SuperDrive

i recently updated the hard drive to a 17" usb2 iMac flat panel, I upgraded the standard 80GB HD with a new maxtor 250GB disk, the problem is that the transfer rate from dvd/firewire/hd to hd are superslow.
what i don't know is the jumper settings for the two units, i used slave for the superdrive and master for the hard drive, is it possible that they go inverted?
thanks
g

I don't know if that's causing the low data rate, but Apple sets the superdrive to master and the harddrive cable select (see http://developer.apple.com/documentation/Hardware/DeveloperNotes/Macintosh_CPUs-G4/iMacNov03/index.html). I know from own tests that the 17" iMac G4 is capable of 50 MB/s for the internal HD.
Mac mini G4 1,42/512/80, PowerBook G4 12" 1,5/1,25/80 + 23" ACD Mac OS X (10.4.7) as well as iMac G4 17" 1,25/2/320, PM G3 DT 500/576/20 + 17" Syncmaster 710T

Adobe Captivate 5.5: Quiz Review for Correct and Uncorrect answers

Hello,
While making a quiz on Captivate 5.5, I couldn't set a review for correct and uncorrect answers. This in order to explain the correct answer.
The review area only appears when the question is not answered. I would like to know how I can fix this or a simple trick to make text appear only when reviewing the question.
Thanks!

Hi and welcome to the forum,
For Quizzes you can customize the immediate feedback by editing the Success/Failure captions. However for Review, if the user has given an incorrect answer the Text Caption has always the same content, it will indicate the given answer and the correct answer. Out of the box there is no possibility to adapt this Review message so that is more personalised for each question.
If you do not mind some more work, I blogged about customising the Review messages. Feel free to have a look:
Customise review messages
Lilybiri

Best scanner settings for black and white text only

I need to scan a lot of older text documents, I have a DRG 1100 scanner. what are the best settings for text only black and white, thanks

"How about under "Default Settings"? Is there a option for B&W printing?"
No there isn't.

Technical Monitoring one template used for production and non-production system.

Dear All,
Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
Regards
Lukasz Goral

Hi Likasz,
You first create and customize the template, and then assign to a system.
If it was selecting a system and then customizing a template, then may be such functionality makes sense.
So, I don't think that is possible.
Better would be copy the template used for production to non-production and make the adjustment to it.
Regards,
Divyanshu

Missing registry settings for importing and burning?

When I start iTunes, I keep getting the message saying that "registry settings are missing for importing and burning CDs and DVDs. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I've reinstalled iTunes ten times (and I've done the "Repair" option through Microsoft Window's Control Panel). Nothing works. I keep getting this message.
(I have QuickTime and RealPlayer already installed on my computer, in addition to the Microsoft Windows cd burning tools.)
Can anyone please tell me what I need to do?

I too have experienced the same problem. The fix to add an UpperFilters with "GEARAspiWDM" followed by a return only resolved the error message relating to the warning indicating that the iTunes drivers used for importing or burning CD's & DVD's are missing. While I can now import CDs to iTunes 8 still no luck in getting it to burn. I have installed the GEAR drivers and followed the steps in http://docs.info.apple.com/article.html?artnum=302976
but to no avail. I also tried the suggestion related to Vista that appears below but to no avail. Hope Apple has spent at much time trying to eliminate this problem as I have trying to fix it!
From GEAR works:
It appears that the AFS driver does not meet Windows Vista driver signing requirements and thus is not compatible with Vista. As a result, the AFS driver prevents the GEARAspiWDM.sys driver from functioning correctly resulting in CD/DVD drives ‘disappearing’ in Windows Explorer and applications using the GEARworks API, such as Apple iTunes and Norton Ghost.
Solution:
Disabling the AFS driver appears to resolve the issue.
This can be done by renaming the afs.sys driver file in the C:\Windows\System32\Drivers directory to afs.txt and rebooting the system. After the reboot the CD/DVD drives should re-appear in Windows Explorer and be available in GEAR and GEARworks powered product (such as Apple iTunes and Norton Ghost).
Note that disabling the AFS driver may result in the loss of the CD recording functionality in the above mentioned software that uses the AFS driver.

Captivate 5.5 Template -- Settings for Demo and Training modes

Similar Messages

Maybe you are looking for