Captivate 7 issue for refresh the slide

have trouble refreshing slide:
The set of actions that I use work well when the course is viewed for flash output however the same when viewed on Ipad do not work and vice versa.
Would the actions to work when publishing for both .swf and html5 output.
We are using a cpCmndGoToSlide to cpInfoLastVisitedSlide which works fine with Flash based build but not in HTML version when we exported the build for both.
There are some other instance which we have found weird in Captivate7. some method that we used to assign in the action works for flash but not for html build eg. execute a javascript method, jump to the current slide. etc.
Need help with reload slide, please suggest a work around.

Set:
cpCmndPlaybarMoved to true
cpCmndGotoSlide to cpInfoCurrentSlide - 1
cpCmndResume to 1

Similar Messages

Time trigger for refreshing the screen

Hi all,
How to implement the time trigger for refreshing the screen after some time interval .
Thanks in advance .

hello Naval ,
set the delay propert Eg : 10
in the on action of the Time trigger Ui
invalidate the node of table .
write the select query for retrivig the PO from table into Itab .
bind the internal table to the node ...
But for your requirement it will efficient if you implement POWL query .
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f1d5ee-84ab-2c10-ce97-97dfd89bc238?quicklink=index&overridelayout=true]
Regards
Chinnaiya P

Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Ever since upgrading to iOS 7.02 and 7.03 having issues with getting the slide button to work to open up iPad 2. Happened last week and was able to restore it to new and get it to work again and it worked great until one week later (this morning) doing the same thing. Have tried restoring iPad to new 3 times (via itunes) and still unable to get the slide button to move so can use the iPad. IPad able to charge, able to restore, able to sync with itunes even able to recover but not able to get past first screen where you have to slide to access iPad. Any help would be greatly appeciated. Live about 300 miles from nearest Apple store.

I am beginning to wonder whether there isn't some weird problem with that Home button.
Try this: Settings > General > Accessibility > AssistiveTouch = On
This will place a button on the iPad's screen.
You can move this button anywhere on the screen.
This button gives you - amongst many other things - a soft Home button.
To turn your iPad on, you can use the Sleep/wake button or move a small magnet across the bezel of the iPad where the volume controls are.
If you use the magnet, then: Settings > General > Lock / Unlock = On
Now should not need to press the Home button anymore.
If this method allows you to use your iPad without a hitch, then suspect hardware problems with the Home button.

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If you make an appointment at the Genius Bar about a problem, they will check and evaluate the device, and if it warrants a replacement under warranty, they make the final determination. We are users here. This is a user to user support forum. We cannot determine what Apple will do. I can tell you what I already did, the warranty follows the device.

Adobe Captivate CS6 importing audio to the slide, worked correctly for 50 PowerPoint slides and the stopped working how do I resolve?

Hi
I am working on a project as normal where I import a PowerPoint presentation to Captivate. Then record the audio to the slide or if need be import the audio to the slide. This has worked perfectly fine until today.
I went to the slide clicked on the option to import audio selected the audio and it imported to the library but not to the actual slide.
I tried doing this also from the menu bar.
Then I tried to drag and drop from the library with no luck.
I then deleted the audio file and tried the process over again.
Next I tried rebooting and starting over.
Still no luck. What are my other options? The file is a a mp3 that is 273 kb.
Thank you

I'm relieved (if a little frustrated!) that others have the same issues, it makes me feel at least it's not just me! :-)
I am running Windows 7 64 bit Intel quad core processor 8Gb RAM if that helps Jim?
Another quick test shows I have exactly the same issues as shooternz and Ann Bens above at 7 & 8 respectively. An audio only or audio/video clip from Bin to SM and I can add markers on the fly perfectly. Audio/video from the timeline to SM works just the same. Audio only from the timeline will not work however.
I tried linking a video clip to my audio clip to see if that would allow me to add markers then unlink and remove the video... but when I opened that in SM the add marker button was greyed out and the keyboard shortcut (M) didn't work either!
Curiouser and curiouser...

Logic for Refreshing the ALV Report (Very Urgent)

Hi Experts,
My ALV report needs a refresh button on the output.
The Refresh button should be available to allow user to keep this report on screen and refresh regularly rather than going back and running it again.
I am using Function modules and not OOPS Concept here.............As i am unaware of OOPS Please provide me solution in FM's Only.
Kindly send me sample logic for this, Very urgent if ur reply is helpfull.... u will be rewarded heavily.......................
THanks in advance.
Rajesh Kumar

Hi,
This mean to say that if you have a 'refresh' push button in your gui status, every time you press the button, the list should get refreshed.
In ALV, to refresh the table you have to call the method "refresh_table_display".
It has the syntax very similar to creating the table.
It has two parameters. In the first one, you can mention if you want to refresh only the data (the icons are not refreshed)
or
if you want to refresh only the icons around the grid (the data is not refreshed - this option is mostly not used in day to day applications).
the synatx is :-
call method grid (name of grid )->refresh_table_display
exporting
IS_STABLE = <STRUCT OF TYPE LVC_S_STBL> (THIS IS FOR DATA REFRESHING)
I_SOFT_REFRESH = <VARIABLE OF CHAR 01> (THIS IS FOR ICON REFRESHING).
Regards,
Bhaskar

Having issues with getting the slide to advance properly after audio is done playing

Before I describe the problem I will describe what I'm trying to do.
I have a slide that plays a video. When the video is finished the user clicks a Continue button, and a short audio clip plays, and then the slide advances to the next screen. The problem comes when I'm trying to integrate closed captions. Since CC is only allowed at the slide lever I created an advanced action that is intended to display the audio text and play the audio. The caption with the audio text displays fine, but one of two things happens with the audio:
The slide advances before the audio is done playing.
I add a pause action to the advanced action and the slide does not advance at all.
Does anyone have any advice on how to control the slide so it will advance once the audio is done? Thanks in advance for your help.

The Pause action WILL pause the slide if invoked. And there is no way to set the duration of the Pause in the Advanced Action.
I would suggest you add a button to the slide that the user clicks to go to the next slide. Add the short audio clip that you want the learner to hear to the On Success caption of that button and set the button properties to Pause for Success/Failure captions. You can add the CC text for the short audio clip into the success caption so that it appears as the audio is playing. As soon as the audio clip finishes playing the success caption will disappear and the timeline will continue to the next slide.
No Advanced Actions required for this solution.

Your opinion on whether to insert a Captivate 5 swf or copy the slides from the swf's project?

I was wondering what peoples opinion is on inserting a Captivate swf or just copy and paste the slides from the project? If I insert a swf the project would be smaller, but sometimes its harder to control the swf (as in playing it inside of a project). If I copy and paste the slides, my project could have over 150 slides. I know that I can break down into small chunks, like one project per procedure, but..
I just would like some other people's opinion on this. I really appreciate any insight you may have ont. Thanks.

I've not had good luck putting Captivate-published SWF files into a new CP project file... As you say, playback can get crazy, slide completions not marked correctly, timings off...
If the SWF files I have are not interactive, I convert them to FLV/F4V and import them into the new CP project that way - much more reliable in my experience.
If they are interactive though, I just past the slides themselves.

Captivate 6 Issue - Faded Objects on Slide

Hello!
I inserted a widget into a slide. When I preview the project, the whole slide is "faded". I have tried bringing the widget to the front, I have tried to send the smart shape to the back. Nothing seems to be working. Here is a screenshot:
http://ttastudents.com/Screen%20Shot%202013-11-05%20at%2010.02.56%20AM.png
Any ideas?

If this widget is an interactive widget, have you perhaps forgotten that interactive widgets have a pause point that is not shown on the timeline? Look in the Properties tab > Timing accordion to see when the widget is set to pause the timeline. The default is at 1 second into the slide. Perhaps your widget is pausing the timeline when other objects are still fading in?

Code for refresh the workspace

Hi,
does any one knows how to write the code to make a refresh in the workspace???
thanks

mmm make a refresh an update like the green arrows in the boxes, you click those arrows and all the boxes refresh the content (similar to a refresh of a webpage in a browser but here internally at the workspace elements)

Select list null value issue - for filtering the tabular form report

hello,
I have a tabular form created on emp table and in the table their are entries for the employees who don't have a location, like it is null for some of the employees.
Now I have created a select list item - for filtering the results based on location.
my select query for select list item is
select distinct location_name d,location_id r from emp order by 1
-- so my select list contains all the distinct location_name including the null on my tabular form.
so based on the selelcted value(in the select list), I am able to filter the results in my tabular form.
but the thing is that when i try to select an null value from my select list - i am not able to filter my report - like its displaying all the records, its not filtering.
can anyone help me out with this.
thanks.

Hi
Try below select for LOV
select distinct nvl(location_name,'No Location') d,nvl(location_name,'No Location') r from emp order by 1 And then change tabular from select where clause also use nvl(location_name,'No Location') like
SELECT *
FROM emp
WHERE nvl(location_name,'No Location') = :Px_YOUR_ITEMBr, Jari

Captivate Bookmarking Issue - Returns to Wrong Slide!

I have a Captivate course with over 270 slides divided into 7 sections. There are 3-4 quiz questions at the end of each section with a score page on the second last page.
when through the course and exiting, bookmarking works until you get around half way through, at which point bookmarking returns me to a slide about halfway through the course. Ive made various version trying to rectify this, and at times it was a quiz slide, other times a standard slide. I tried moving all the quiz questions to the end of the course, and bookmarking would return me to a specific quiz slide each time. This bookmarking issue would appear when I existed the course after not completing it, or completing it and failing the quiz. Has anyone experienced this or got an idea what might be causing this?

What version of SCORM are you publishing to?
The bookmarking info is held in the suspend data, along with quiz info and all variables in the project. It could be that the suspend data has reached it's limit. Or it just can't handle that many slides.
There are ways to manipulate the bookmarking in CP as I wrote in this blog:
http://www.tlcmediadesign.com/blog/2015/01/controlling-captivate-bookmarking/
This probably won't help your situation though. Depending on the SCORM version you can use the comments field to store info and use that to bookmark.
With a project of that size and depending on the info you need to tract/save, it would be best to connect a non-Captivate SCORM driver and make a SCORM calls yourself..
Or you can split the course into 7 separate SCO's to reduce the suspend data.

PowerPoint parsing into Captivate 8 issues - where are the Adobe personnel to get this right?

In Captivate 5.5 I can import PowerPoint slides without any problems, BUT in Captivate 8 the parsing is TERRIBLE (even in high fidelity) leaving me with this result:
I have checked the size of the PP page vs the size of the Captivate software simulation video. I have imported it into an existing capture, I have started a new PowerPoint project and I have imported it into a new Blank project. Nothing works! The parsing is still terrible.
I have now read a number of Forum posts about problems with importing PP into Captivate 8 - NONE of which had answers.
So my real question here is: where are the actual Adobe staff members to answer this question and FIX THE PROBLEM! I have a contract to make videos for a company and I will lose my contract if I cannot produce good quality work.
This is NOT GOOD ENOUGH!!!!

Lilybiri
You are a star! Thank you so much for the link.... I will certainly write to them.
And hopefully someone from Adobe management will see this and consider actually paying some of the generous users who contribute so much to this Forum, at least a stipend... Especially as Adobe is being paid good money for the software.
The response that I had to problems with Articulate Storyline is outstandingly good. Yes, they do have a general forum which is quite helpful but when I need specific help, their support is excellent. Eg. At about 1am on New Year's day I had a query about transferring my program from one computer to another. Thinking I would only get an answer a few days later I was really surprised when five minutes later I received an email telling me exactly what to do and inviting me to online chat if I still had a hassle.
I also belong to other Forums for various paid-for software that I use and although many of the people who answer in the space are just fellow users, their super-users (who are always around) are actual developers and are paid by the software provider to help the people who have bought their software.
So why can't the mammoth Adobe do the same?
Cheers
Ann

Steps for Refresh the Test Database with cold-backup

Hello everybody !
Can any body write me the steps to referesh the test db ( T1 -> already there) from the cold backup of production database ( P1 on another machine ) . all the datafiles are there available in the backup of production ..controlfile or redolog files are not available of production database. Both databases are 9.2.0.8 and are on different machines with same OS of AIX.
Thanks in advance !

Steps
1.) Before Shutting down P1 DB for cold back execute
alter database backup controlfile to trace;
2.) copy the created the trace file from udump to test server
3.) shutdown the P1DB and take cold backup containing all datafiles
4.) Copy dbf to test servers
5.) Edit trc file copied in step no 2
6.) As you are changing the name of db use option SET ( in place of REUSE)
7.)Also remove unwanted portion
8.) Change the name of trc file to <somthing>.sql
9.) Startup test db in nomount stage
10.) run the above created sql
11.) tHis will create controlfiles, place db in mount stage
12.) issue alter database open reset logs
13) add tempfiles to temp tbsp
regards
Pravin

How can I automatically run animations when the slide is invoked?

Hi All
My question is (hopefully) simple, I have a number of Microsoft Powerpoint presentations that I want to import into Adobe Captivate 6. I want the slides to automatically run their animations when the slide is invoked either by clicking on the Table of Contents or by clicking on the Playback Control Panel. In other words, I want the slides to play their animations as soon as they are opened up rather than the viewer having to click on each side to make the animation work. Many thanks in advance for your time and efforts.
Moon_dogworth

Hi there,
Welcome to Adobe Forums
I apologize but I did not quite understand what exactly you are trying to achieve. If you want certain transition on the slide when the TOC is clicked or the slide is entered then you can choose the transition under the Properties panel on the right side.
See picture:
Hope this helps!
Thanks!

Captivate 7 issue for refresh the slide

Similar Messages

Maybe you are looking for