Captivate 8 - Issues with correct recording of Software Simulations in monitor 2 (of 2)?

I've been recording Software Simulations in monitor 2 (screen 2 of 2) and an application in monitor 2 to produce automatic demo, assessment and training output. It should be possible but the system doesn't capture all recordable actions (the result is 1 slide for each of demo, assessment and training versions with the ‘final’ screen view and one mouse movement). However if I shift my recording area to screen 1 (i.e. monitor 1) there are no issues. It can be worked around, however is there some other set-up option I'm overlooking?
Thanks in advance for any input.
Jenny

Thank you so much for posting your question. I would have never stopped to think that which screen I was trying to record might make a difference. I was having huge issues with a software simulation not capturing all the necessary screen changes (on Monitor 2), but after reading your post, I moved it to Monitor 1, and it's working as it should again.
You just saved me lots of frustration.

Similar Messages

Project Server 2010 - Issue with correct recording of timesheet actual hours with decimals

We have Project Server 2010 and are using the timesheet functionality for recording resource times/costs in the schedules.
It has come to light only recently, that for one user, suddenly the times she is entering are not being summed up correctly. An image of her timesheet and the manage timesheet screens are shown below. Note she entered 9.5 hrs but the total that
appears in the manage timesheet screen is 9.514hrs.
If you look at the history of the previous weeks as well, the weird change toi the total hours has occurred in the previous 4 weeks as well. I have no idea why this has started happening and am not aware of any change to the resource's details (apart
from a change to her hourly rate).
Has anyone experienced this before?
Thanks
Peter

We have this issue and are past the patch that discussed decimal rounding (April 2014, though it was more related to the application of resource rates). This seems different from that noted rounding problem.
We have at least three users (out of 625) that have this problem every week and it isn't always the same users. If we re-enter the time and zero fill the cells for the problem task it will fix it.
It is almost like when a user deletes a value that it is leaving residual numbers in the field.
Our 2010 server version below which is through Sept 2014 CU:
14.0.7132.5000
Any help on this would be appreciated.
Thanks!

Can I show quiz results in the recording of software simulation?

Hello, Everybody, I'm using Adobe Captivate 7. I want to show quiz results after recording the software simulation. If the recording type is training, the user need to click for the instructions. When the user's click is wrong, the captivate will show the failure message and I want to reduce my score due to the wrong click. Please give me a instructions. Thanks!!!

Please do not double post issues.

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

I have to downgrade from Yosemite to Snow Leopard because of compatibility issues with some of my software. Can I use PS Elements 12 with snow leopard?

I have to downgrade from Yosemite to Snow Leopard because of compatibility issues with some of my software. Can I use PS Elements 12 with snow leopard?

PSE12 became a 64 bit app for the first time on Mac. The recommended system requirements are Mac OS X v10.7 through v10.8.
Are you not able to use lion or Mountain Lion?

Auto Record in Software Simulation

Hi, I am attempting to create a software simulation of CATIA
V5.
Only the first frame gets recorded. No mouse activity or
selections frames are created after the initial frame. Then the
only way to end/save the session is to activate Captivate in the
task bar.
I have tested the Software Simulation Auto mode with other
softwares, Maya, Max, and Adobe products, and it seems to work ok.
Problem is, CATIA V5 is my focus software.

I get mouse clicks, and the associated sound, sporadically,
about every fourth or fifth action.
The only way to stop the Captivate 4 session is to first
select the Captivate button on the task bar, then I can select the
"End" button and the session ends.
Full Motion Recording catches more of the action but still
not all.
For Example:
I Select File, the action gets recorded
I select New, the action NOT recorded
This brings up a new project window, the window is recorded
I select part out of the options list, action NOT recorded.
This is a bit frustrating because C4 works with other apps
but CATIA V5 is the ONE I need to record.

Problem with multiple output for software simulated project

When a software simulated project in captivate is published more than thrice, the output is not generated properly, i.e not in-line with the project. Is this a problem with my system or due to some settings in captivate which is not activated?

Thanks for the suggestions Malcolm,
They're very handy app's for sure, but unfortunately they didn't fix the problem.
Detour DID overide the routing for iChat's general bleeps & noises, but not the audio stream from video conferences (which is the problem I want to fix).
If anyone has any other suggestions for fixes, I'd appreciate it!
Thanks again,
Jason

Issue with correct trajectory reading using Labview and Compumotor

Hi everyone,
I am having some issues with my compumotor/Labview communication and was wondering if anyone had any advice.
My setup is a National Instruments PCI-7432 control board linked to a
UMI-7762 Interface board then I have my driver and motor, the Compumotor
M83-135 R14, serial 18054. When I use the NI Measurement and Automation Explorer and tell it to go at a velocity, the velocity is no where near the commanded value.
It is not returning any errors either, I’ll tell it to do say 500 rpm’s and it will take ~2.5 seconds to make a complete revolution. I can get the motor to spin at a very fast rate so it is working, I just was wondering if there was something wrong that would cause it to deviate so far off the assigned velocity.
I didn't know if I accidentally changed a setting with labview that would cause it not to read the velocity correctly or something like that.
Thank You
Keith Kirkwood

Keith,
It sounds like one possible issue is that your feedback is not correct. In which case you'll want to check encoder feedback -- disable your motor in software but leave everything connected. Then manually turn the motor and check if the 1-D Interactive section in MAX reports the correct steps per one revolution. If not, then check that the encoder setup section is correct, specifically the encoder counts per revolution.
Also, your motor may need to be tuned, assuming that it hasn't already been tuned. Is your motor a servo or stepper motor? From what I could find online it looks like the M83-135 is probably a servo. Here are a couple links to documents that will help you tune your motor, which often solves velocity issues:
Understanding Servo Tune
http://zone.ni.com/devzone/cda/tut/p/id/2923
And if that seems not to work,
Unable to Tune a Servo Motor
http://digital.ni.com/public.nsf/websearch/19668AB2D4997F3D86256E940082F1EF?OpenDocument
Let me know how it goes, or if you have more questions. Thank you.
-Allison S.
Applications Engineering
-Allison S.
Calibration Services
Product Support Engineer

Issue with E51 and Blackberry software

Hi all,
I'm having an issue with the connectivity between the phone and the PC.
I have installed version 8.7.1 on the mobile phone and 2.1.1.22 on the pc and when I try to connect both it shows a message "Communication with the devide was not successful. Please verify the following and try again: 1. Ensure the handset is connected to the computer. 2. Ensure the BlackBerry software is running on the handset."
I've tryed everything ang "googled" for help but until now I was unable to go further on the instalation.
Can someone please help me on this?
I've already uninstalled the sw from the PC but each time I install it again he has all the configurations already done so I'm not able to do a completely brand new installation.
It's a BES with Lotus Notes.
Hope someone can help.
Regards.
Message Edited by schummy on 11-Feb-2009 12:35 AM

I fixed it by using a PC and not a Mac

Issues with the latest N86 software update

As the title says, i updated my n86 software to the latest version with the pre-instaled application in my phone..And then the troubles started...The themes effects such as fading when rotating the screen takes like 10 and i repeat 10 second to finish, the camera starts after too much time and i'm always asked to connect to the internet..what happened?
With the 11.43 software i did not found any problem..suggestions?

The light sometimes remains on, even if i lock the keypad. Beside this, i noticed take my battery lasts like 1 hour while the light is on. This happens few times, but is really annoying.. Also, i now that the theme effects are not essential, but i want to keep my phone fully functional, so i'd like to know what's this issue about..
@metalfan I didn't expected a quick answer, i was only preoccupied for these problems
How can i to restore the original firmware?
I tried to remove my sim(also i don't use a memory card), but nothing changes...

2 issues with X-Fi Titanium software (Dolby Digital related)

These arnt anything major but worth fixing IMO.
1. There is a slightly noticable sound quality drop in nati've Dolby Digital sources when using the "Speakers" as the defualt device compared to using SPDIF in Windows playback devices.
For example I have a movie encoded in Dolby Digital, I use the optical input on my 5. and leave "Speakers" as default device in Windows playerback devices, this way I can add effects such as CMSS3D EQ etc, but leaving EVERYTHING off the SQ is not as good as selecting SPDIF in Playback devices, the major downside though is having SPDIF in windows audio panel bypasses any settings in the creative console.
I realise this may be an issue with Windows rather than Creative.
2. Dolby Digital remains enabled when Headphones is automatically Activated / When Dolby Digital is activated with headphones 5. sound is used but the center, sub and 2 rear channels dont get passed.
I have my entertainment mode set to 5. wich automatically switches to Headphones when I plug them in.
I used Windows playback devices to do a speaker check, this is always set to 5. and the creative console never overrides this.
When I test my headphones with DD off I hear all 6 channels in my headphones, when I enable Dolby Digital I only hear the front left and front right channel, if headphones mode is suppose to be automated it should automatically adjust for Dolby Digital either by disabling it until the headphones are unplugged or to pass all 6 channels to the headphones like it otherwise normally would.

Edit: I now installed the Dolby Digital Live drivers, that were hidden on the download page until I pressed "All".
The DDL option now appears under "Encoder", but still there's not sound coming through.

Issue with correct slide background not displayed

I am experiencing problems when publishing content captured from a simulation apart from the really annoying cursor ghosting when playing back typed text and the red screen of death and ghosting from previous slides when scrolling
I am now getting a completely different background on the published and previewed through browser slide to the background the unpublished slide is designed to show I have of course checked the timeline for hidden overlays and have also dragged the background from the library over the existing background to see if that cured it but no it still shows a background that is present in the library but is nowhere on the slide
the 2 slides either side play and look correct
The slide is also displayed correctly when previewed using "from this slide" it is only when published or through browser that the problem occurs
Strikes me that some of these issues are well past the time they should have been sorted I am begining to lose confidence in what should be a good tool but needs to be far more reliable
what with giving hackers my credit card details Adobe seem to be sliding and I am gueesing it is because they are getting greedy and quality is taking a back seat
Everything is getting so buggy Acrobat Pro, Photoshop etc all getting very unreliable I work in a large training dept for a majopr co and I am seeing issues on all different machines and OS so it is not just my machine

Hi Rod
Thanks for your reply
I have tried all the supposed fixes
Inc changing quality of slides to 24 bit and no compression
Maintain slide quality and not maintain slide quality, reducing size of file, export background to photoshop reimport jpg
With mixed results, I would just like your product to do what it says it will
The only way I have found to eradicate this problem and the others mentioned is to remove any fmr from the content
I have checked for proxy cache republished in 3 versions of flash sometimes have got different results but all unacceptable
I also note many others have had same problem without resolve
Can you please halt development on new products until you resolve problems that have persisted across several versions
I am also experiencing the close browser problem which I have solved by adding Javascript but surely you with your resources could do this for your
Customers who pay very good money for your products
I didn’t think I was buying a do it yourself kit
Regards Chris Lord

Issues with 2007-004 AirPort Software Update

Hello - I saw some threads around this re: other updates.. however, I have a MacBook Pro 15.4" with version 10.4.10. This weekend, Auto Software Updates updated the Mac OS with the 2007-004 AirPort patch. Prior to this, I had perfect 801.11NG connectivity with my router (D-Link DIR-655 N-Extreme) - all 4 bars lit up no matter where I was in the house. However, since this patch, my connectivity has become very flaky. Sometimes I'll have strong connectivity for a few hours, then it will suddenly drop (will go from 4 bars to 3 - then will have performance drag on my applications or drop completly).
I notice while watching my router statistics page that throughput drops from 50-60mb down to 11 when it drops.
We have an iMac in the house which is NOT experiencing this issue (it is on 2007-003). I also have 2 Apple-Tv's, neither of which are having this issue either.
This is extremely frusterating - as not having stable wireless on a laptop is very painful. I've noticed threads where this patch was suppose to fix this problem for people who had 2007-003 patch. For me, it has caused the reverse.
Any recommendations or thoughts? I'd like to roll-back to 2007-003, but it's not clear how to do this - but if I could, I could at least isolate it to the patch, and not some other coincidence.
Thanks, Ed

The light sometimes remains on, even if i lock the keypad. Beside this, i noticed take my battery lasts like 1 hour while the light is on. This happens few times, but is really annoying.. Also, i now that the theme effects are not essential, but i want to keep my phone fully functional, so i'd like to know what's this issue about..
@metalfan I didn't expected a quick answer, i was only preoccupied for these problems
How can i to restore the original firmware?
I tried to remove my sim(also i don't use a memory card), but nothing changes...

Only last slide showing when recording a Software Simulation in CP5

I'm working on a series of lessons about a database application. I've recorded 3 lessons with no problems. Of course today is different. I've set CP5 up to record a new set of screens and when I finish recording only the last slide is showing up on the filmstrip. I've checked and it isn't on FMR. Any ideas. I've ran through the simulation 3 times making sure I've clicked somewhere on each screen I want it to capture and no luck.
Thanks for any and all help.
Susan

I have the sound turned down since I work in a cubical.
The problem resolved when I rebooted the computer.
Thanks
Susan Wright (Equilady)
Remember, the mighty oak was just a nut that held its ground.
http://www.equilady.com

Mac Mini DVD issues with 3rd party player software

New to the forum. I have a Late 2012 Mac Mini with 16GB RAM and 256 SSD (Crucial) fitted and the latest version Yosemite OS. I get a slight jerkiness when playing DVDs from an external Panasonic UJ265 USB3 Blu-ray drive using either Aurora or Macgo software, however Blu-rays play fine and the jerkiness disappears with Apple's native DVD player. Any ideas what might be going on? Many thanks.

I'm having a similar issue as well with my Mac Mini (Macmini 4,1) connected to an HP LP3065 via the Mini DisplayPort to Dual-Link DVI adaptor. I also have a Dell 2407WFP connected via the the HDMI->DVI connector:
Summary:
When the Mac Mini wakes from sleep, the display for the Dual-Link DVI connection is set to the wrong resolution and cannot be modified in System preferences.
Details:
In my case, this manifests as a blank screen and flashing green power led on the HP, which is how the it indicates the display resolution is set to something other than 2560x1600. The Dell still wakes up, but is now in Mirroring mode. At this point, Displays system preference shows a generic "Display" with a resolution of "640x480", plus the HP2407, with no option to change the resolution for the generic Display)
The only thing that seems to fix the problem is restarting the Mac Mini.
This seems to happen about 30% of the time the Mac Mini wakes from sleep. The rest of the time, everything works fine. It's extremely annoying.

Captivate 8 - Issues with correct recording of Software Simulations in monitor 2 (of 2)?

Similar Messages

Maybe you are looking for