Capturing AED in J2iun transaction for Cenvat utilization

Hi experts ,
Iam unable to view the AED amount (applicable at the time of import purchases) in j2iun transaction.
Because of which the respective amount cannot be utilized through j2iun transaction.
can anbody help out like what configuration needs to be done for enabling the same in j2iun transaction.
Regards
Anand

Hi,
Is any one is having any solution for this thread? I'm in ECC 6 SR3 Patch level 12. but I'm not getting fileds for ECS, AT1 in J2IUN Trnasaction.
Is there any SAP Note u r having?
Rgds
Test

Similar Messages

  • How to reverse J2IUN transaction and re utilization of J2IUN?

    Dear friends
    At my client place user run the J2IUN transaction in current date for the month of April 2009 utilization by mistake. Now it needs to be reverse and re utilize on 30th April 2009 date.
    I tried in the following way in testing client.
    I have done the mistake what the user did in Production server.
    I posted the reversal in J2IH, which is successful in reversal of accounting document and posted the RG23A Part II entry.
    But when I am trying to utilize again in J2IUN, system is not giving me any amount for utilization.
    So how to solve this problem now. Please guide me.
    Regards
    Kiran A

    Hi,,
    u can make JV in T.code  J1IH
    Regards,
    R.N.Reddy

  • AED not visible in Cenvat Utilization.

    Hi ! All,
    At my Client site, in Excise scenario, in addition to BED,ECess,SE Cess, AED ,is also used.
    Now friends, is this AED cenvatable,  because this AED part is not visible during cenvat utilization.
    Do I need to some configuration so that I will be able to view it.
    Thanks,
    Regards,
    DGN

    hope u talking about AED additional duty of excise  and not ADC additipon duty of customs
    If u talk of AED
    then according to law AED can       be motivated agains AED only
    So you will have to have a sales document with AED amount ,    IF u have     sales doc with AED then     Input AED will also be seen in J2IUN
    hoipe this helps

  • Capturing Excise details for CENVAT in Stock Transfer

    Dear Gurus,
    Our requirement is that we have 2 manufacturing plants and first plant sends a semi finished product duly paying all Excise duties, to the second plant and they receive it to manufacture a finished product and sell it from there.
    Both the plant are under the same company code.
    First plant raises a Stock Trasfer Delivery doc with Excise Invoice and sends the goods to the second plant. Second plant captures the Excise duties through J1IEX_C, so these duties can be availed for CENVAT credit.
    I have created Plant 2 as a customer and Plant 1 as a Vendor. Also maintained 'Shipping data for Plants' for both the Plants. I am not able to do J1IEX_C, as the system is saying Maintain Vendor for the Customer 'ABC' attached to Supplying Plant 'ABC'.
    Kindly let me know what have i to do to successfully create STO and allow the second plant to capture the excise duties for CENVAT credit purposes.
    Thanks and regards.
    Venkat - Hyd.

    Thanks Ravi or Raj, did that, but that has not solved the problem. Anyways since no inputs am closing the thread.
    Warm regards.
    Venkat - SD

  • Capturing change code/Reason code in CAT2 transaction for time change

    Experts,
    Wanted your suggestion and expertise in a solution where in CAT2 if a user changes the time/wbs element/tax area/work type he should be forced to put the reason code for change. The change event would populate/capture the change code, reason for change at cell level in CAT2
    Your pointers would be of great help

    The following enhancements are required to achieve the new pop up window functionality:
    1.     A new customer field should be added to the CATS time entry screen in the CATSDB.
    2.     A new check table should be created in CATSDB containing the allowable drop down entries for the new field.
    Customer fields are inserted into the CI_CATSDB structure. This structure is contained in the database table for the Time Sheet (CATSDB).
    Steps:
    1. Create a customer project using the SAP enhancement CATS0005.
    2. On the initial project administration screen, select the Enhancement components field and choose Change.
    3. Select the entry CI_CATSDB and choose Edit -> Components.
    4. Create the structure CI_CATSDB.
    5. Insert the new field to the Time Sheet database table into the structure.
        Select the data dictionary type CHAR
    6. Check and save the structure.
    7. Activate the structure.
    8. In the Cross Application > Time sheet section of the IMG Choose Make field assignment.
    9. Assign the new field to the view.
    10. Assign a number from 1 - 10 specify the name of the field, u201CChange Reasonu201D.
    Then Conditions Check for New Field:According to requirement

  • CENVAT UTILIZATION ON RAW MATERIALS.

    HI ,
          AM INTO SALES & DISTRIBUTION.
    CAN U PL EXPLAIN  WTS CENVAT CREDIT & HOW ITS  UTILIZED , ON RAW MATERIALS & FINAL PRODUCTS.

    Hi Jerry,
    Background
    When we Purchase goods we pay duty (Excise) this we can take credit if we are making some Finished goods out of the raw material by doing some value addition. When we do Sales of the Finished goods which was made by converting our raw material we have to Pay Excise (because goods are Physically moved outside our Plant).
    According the Concept of CENVAT since we have already paid Excise for the raw materials which we have used for making our Finished goods we can claim the excise we have paid & only the difference amount we will pay to the government.
    So normally when we do Procurement we will capture the Excise duties in Seperate GL's & when we do Sales we will capture the Excise payable on sales in Seperate GL's & at the end of every month or before 7th of the next month we will do utilization ( i.e we will utilize the excise payed on inputs(purchase) against the excise to be payed on Sales).
    In SAP
    Procurement Side
    Capture & Post Excise - T.code - J1IEX or MIGO
    The duties (BED,Ecess & SHEcess) will post in different A/C's say X,Y & Z
    The sum of X,Y & Z will be posted in a clearing A/C & we will pay the same to Vendor when we do Bill Passing.
    Sales Side
    When we Sell goods we will create an Excise Invoice as goods are movin out of our Premises.
    T.Code - J1IIN
    We will post the Excise Payable on Sales to different GL's
    CENVAT Utilization
    T.Code - J2IUN
    If our input GL balance (Purchase Excise Credit) is less than our Sale side Excise Payable - We will pay the balance amount from PLA
    We Will Configure the GL A/C's in SPRO/Logistics General/Tax on Goods Movements/India/Account Determination
    Go through the CIN threads in the Forum for more clarifications.
    Award points if you find this as useful.
    Thanks,

  • Excsie effect in Cenvat Utilization Register after Vendor Return

    Dear Freinds ,
    I had a query , kindly clarify it.
    I am doing vendor return for a particular material, after doing vendor return in J2IUN(cenvat Utilization) the payable amount against BED , ECS & SECess is increasing, is this right , what I feel the available amount against BED/ECess/SE Cessshould reduce .
    If what ifeel is right then what sholud be done to get the right effect.
    Kindly guide
    Thanks

    Hi,
    after doing vendor return in J2IUN(cenvat Utilization) the payable amount against BED , ECS & SECess is increasing, is this right ?
    Right, system posting correctly.
    Simple logic;  if sales occurs, we are charging excise taxes from customers  and pay to Govt, ok.
    If you send back to vendor i.e indirectly you are sending to customer, so that it may reflect in J2iun also.
    Cheers
    R

  • Excise capturing problem after goods recept for import PO

    Hi friends.
    excise details doesn't flow to the transaction of j1iex after receiving the goods in migo and capturing part one entry in excise tab for the import po.
    if i try to capture and post the excise during migo the whole excise values flows inthe fields.
    but ithe same is not possible if i want to capture seperately with j1iex transaction.
    kindly guide me if any configue required
    thanks

    Welcome to SDN,
    Since you are newbie,i will guide you with steps,please search forum before posting in your next postings.
    Correct steps to do GR along with excise for import p.o are,
    1. Enter respective customs duties/rates in p.o condition type & also enter respective customs vendor in same.
    2. Do customs miro with reference to p.o
    3. If you are doing J1IEX capture excise using J1IEX referring purchase order,later system will ask for customs invoice no. & year for validation.
    4. Refer excise invoice no. in GR(MIGO).
    5. Finally post excise invoice in J1IEX.

  • CENVAT utilization by Manual Journal Entry

    Hi All,
             Can anybody explain me the process of cenvat utilization by passing Manual Journal Entry.
    Please reply fast
    Regards,
    Abhishek

    Please read the following document which explains answers to your questions
    [https://websmp205.sap-ag.de/~sapdownload/011000358700006192062006E/IndiaLocalization_2005B.pdf]
    Check page no. 29 which explains "Creating Opening Balances for PLA/ CENVAT"
    Also have a look at the following Blog, Implementing SAP Business One for India Localization
    [https://www.sdn.sap.com/irj/sdn/weblogs?blog=/cs/junior/view/wlg/10739]
    Edited by: Sridharan T on Sep 8, 2008 11:14 AM

  • Cofiguration cenvat utilization

    Dear gurus,
    i want to have clear idea reagrding cenvat and how it is determined and tell me how to configure it plz help me regardin this

    Utilization Determination
    Menupath:
    SPRO > Logistics-General > Tax on Goods Movement > India > Business Transatctions >Utlization Detemination
    In this activity, you specify which CENVAT accounts are to be debited by the Fortnight Utilization of CENVAT report: When the report calculates how much excise duty you must remit, it automatically proposes which CENVAT accounts the duty should be debited to. Here, you specify those defaults.
    You can either:
    • Debit all the excise duty to one account
    • Debit the excise duty to more than one account, in which case you specify which percentage is to be debited to each account
    Example
    If you want 50% of basic excise duty (BED) to be debited to the RG 23A account and the remaining 50% to the RG 23C account, you would make the following settings:
    Acct name                       BED perc.
    RG 23A BED account          50
    RG 23C BED account          50
    Alternatively, to debit all of the BED to the RG 23A account, and then RG 23C account, if there is not enough in the RG 23A account, you would make the following settings:
    Acct name                  BED perc.     +
    RG 23A BED account          X
    RG 23C BED account          X
    When you come to run the report, the system takes the RG 23A account because it is the first one you have entered. If this account does not cover the BED, the system takes the RG 23C account instead.
    Immediate Utilization of CENVAT
    Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.

  • Cenvat Utilization and Service Tax

    Dear Gurus,
    Below mentioned points is comes under  Which module (FI/MM/SD)??
    1.) Cenvat Utilization
    2.) Service tax utilization and maintainance of Service Tax Register
    Please provide the Honest Inputs.
    Thanks & Regards
    Nitin Chhabra

    Hi,
    In many of the organisations, finance & accounts departments handles this activities. The entries for CENVAT and Service tax generates from all the three modules. Monthly Utilization, updating the RG registers and statutory tax returns are solely
    handled in accounts department.
    Regards,
    Sadashivan

  • Transaction for Open Sales Orders

    Hi Experts
       can u let me know the Transaction for Open Sales Orders.
    Regards,
    kumar

    you can check the tcode
    VA05.
    vijay

  • How to create transaction for a maintenance view, Thank you.

    How to create transaction for a maintenance view,
    Thank you.
    deniz...

    Hi Deniz,
    Go to se93.
    Then create the new T.code.
    Under that select parameter Transaction.
    Then give the sm30 in the t.code in default values tab.
    check the checkbox skip initial screen.
    in classification tab.
    click checkbox inherit gui attributes..
    Now below..
    In the default values..
    select
    viewname and give ur table name.
    UPDATE= Xsave
    view - table name ( Should be upper case
    update X ( should be upper case).
    http://www.sap-basis-abap.com/sapbs011.htm
    Hope this helps you.
    Regards,
    Viveks

  • How can i pull the payment transactions for each invoice?

    Hi folks
    iam developing report for following requirement.
    want to disply the vendor transaction file for all company codes Fiscal year,of 2004,2005,2006, and 2007 (to date).
    The purpose of oureport is to analyze our company invoices and investigate potential overpayment opportunities. In order to effectively accomplish this, we need a single invoice record for each invoice that was received by compnay from their vendors. The single invoice record would contain at least the following columns: Vendor Number, Vendor Invoice Number, Invoice Date, Invoice Amount, SAP Document Number, Check/Wire Number, Check/Wire Date, Check/Wire Amount. SAP would have multiple rows in a table for any one invoice, whereas we would only want to see ONE row for every vendor invoice.
    if you know that company pays (for example) 75,000 invoices/year - then the transaction file you would have about 300,000 records in it. 75,000 Invoices * 4 years.
    inodrer to develop this report iam using table PAYR -payee
    BSIK ( closed items) BSAK ( open items).
    my question is any one tell me how can write logic to  pull the payment transactions for each invoice?
    regards
    neeru

    Hi rob,
    yes you are right,  an invovice may contaion duplicate records
    example  PAYR table contain
    invice no         compnay code  checkno vendor  fisclyear
    ( doc.number)
    2000134373     001                    10287200          2007
    2000134373     001                    10427890          2007
    so as per my requirement how can i write the logic.
    regards
    neeru

  • End User Transaction for Mass Change Sales Orders

    Hello,
    Transaction MASS can be used to change sales orders using object type BUS2032, however, end users are not allowed access to MASS.
    In most other cases, the object types can be accessed by individual transactions, for example, MEMASSPO for BUS2012 and XD99 for KNA1.
    But I cannot seem to find a similar transaction for object type BUS2032, does anyone know whether one exists or how to create such a shortcut.
    Thanks,
    Jake.

    Hi
    See SAP Note 483303 - BUS2032: Only sales orders of category VBAK-VBTYP = 'C'
    Regards
    Eduardo

Maybe you are looking for