Capturing information from the Resource Object forms

Hello,
I'd like to capture information (dburl, dbdriver,username and password) from my resource objects to use in a class i'm developing through the API.
However, I failed to find any methods in API to get this information... does anyone know how to retrieve this?
Thanks in advance,
Tomic

Hi,
I am not very clear about your question.The information below is usually store in IT Resource.If these information is store in IT Resource you can use tcITResourceInstanceOperationsIntf.
What is your business drive for getting this information from resource object form.Can you explain me so that I can have better answer.
Regards
Nitesh

Similar Messages

How can I get the value of a custom property from a resource object?

I am trying to get the value(s) of a custom property, called "status" within a method. The method has an object of type IResource available to it.
I have tried the following:
PropertyName propName = new PropertyName("","status");
value = res.getProperty(propName).toString();
However, I am getting a NullPointerException when I try to create the PropertyName instance.
Is there a better way to get the value of a specific property from a resource object?
Thanks,
Tom

Thanks Praveen.
I was missing the default namespace of "http://sapportals.com/xmlns/cm" - I thought I could just pass an empty string for the namespace, but it looks like I must always specifiy, even if it is default.
Tom

Is it possible to get the information from the complete forms send to different email account

When i have a paid account is it than possible to get the information from the different forms send to seperate emailaddresses.
Who dont have a account from formscentral but just need the information directly in there own inboxes?
Because we're looking for a good and simple way to make qoustion & complain forms. But these need to go to different people in the company.

You can have notifications sent to multiple email addresses, but each will need to have a FormsCentral account. They can be free accounts. What you do is create your form and set up the email addresses that you want the information to go to to be Co-authors or Contributors. The co-author/contributor accounts will then need to log into FormsCentral, go to the Options tab and check the email notifications checkbox.
I hope this helps.
-Jeff

User defined fields in Resource object; Resource object form

Hi,
Can anyone tell me what is the purpose of having user defined fields for resource object and resource object form and how can we use those fields while requesting for target resource.
Regards,
Alabhya Goel

Thanks for your reply!!!!!!!!!!
I know about resource object form i am just asking what is the use of user define field in resource object form. How can we use it. Like when we create any user defined field in under User form those fields display on create user form but when we create any user defined field in resource object from those are not displayed in form.
If anyone has used or worked on user defined fields in Resource Object or resource object form; please give me an overview over the same.
Regards
Alabhya Goel

Error while changing the Resource Object Status

Hi,
I am trying to change the resource object status from Waiting to Provisioned for a self service task. Before approval I see the Resource Object Status as " Ticket Sent To REMEDY" on the administrator's web console and at the Requestor's web console I get the following error message-
???en_US.global.viewProfileForm.Lookup.Ticket-Sent-to-REMEDY???
But after approval, based on the completion the task, the process on both the consoles is set to provisioned. That is what I want to display but the problem comes when the requestors sees the error status message on its console before approval.
Can any body tell me the reason of the above error and how to resolve it?
Thanks in advance

do you have any custom written event handlers getting triggered off after request submission or during approval?
It might also be due to either a browser issue or you might have missed any entry in the xladmin properties file for a custom label/error message etc.

Trying to read an XML file from the resources

Hi,
I am having a problem reading a file from the resources: In my project I have data.xml in my project resources folder. I tried the following and it does not work:
File xsltFile = new File("resources/data.xml");
or
File xsltFile = new File("/resources/data.xml");
Anybody could help please.
Rgrds.

Hi,
I have tried the following and it does not work:
URL url = this.getExternalContext().getResource("/resources/displayPassengers.xsl");
File xsltFile = new File( url.getFile());
However, the url object has the following properties:
url.getPath() = "/server/benchmark/resources/displayPassengers.xsl";
url.getFile() = "/server/benchmark/resources/displayPassengers.xsl";
but I still can not read the xsltFile. The code are on the prerender() method of the page.
Please let me know.
Rgrds.

Message (on one account) when logging in: The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database.

After installing the reportservice/database i cannot use the Configuration Manager Console 2012 anymore with my own AD account. (The accounts of my colleagues are stil working)
When i login i get the following message:
The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database. The account must belong to a security role in Configuration Manager. The account must also have
the Windows Server Distributed Component Object Model (DCOM) Remote Activation permission for the computer running the Configuration Manager site server and the SMS Provider.
I checked the following:
I am a administrative user in SCCM (Full Administrator)
I am a member of the administrator group on the server
Deleted HKEY_CURRENT_USER\Software\Microsoft\ConfigMgr10
I tried to start it on multiple workstations and deleted my roaming profile
Any more suggestions?

Hi,
Maybe you could have a look on the below blog.
http://blog.nimbo.com/how-to-disable-user-account-control-in-windows-server-2012/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact information
may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ERROR: cannot find information from the FND_FORM_FUNCTIONS table

Hi,
I am in CU2, i have created my project, set the right responsibility in Project property panel of my Jdeveveoper.
When i run the first page all is ok, but if i click on a h-grid link , i receive the following error:
"Your system has not been properly set up. The system cannot find information from the FND_FORM_FUNCTIONS table which is needed for this process. Please consult your System Administrator for further assistance."
This happens only if i launch the custom from jdeveloper. On the Applications, the custom works fine.
Any idea about the error?
Thanks in advance,
Carlo

Please check the calling logic which is written to invoke the custom form from the existing form.

Retrieving free/busy information from the server takes very long time

Hello, we are running Outlook 2010 32-bit in Windows 7 64.bit, and have encountered a strange problem, whenever we want to book
a resource (i.e. conference room) from Scheduling assistant, it takes very long time, sometimes even more than a minute to see the utilization of the room, it being stuck at "Updating schedule information. Retrieving free/busy information from the server"
The interesting thing is that most newly deployed PCs exhibits this same behavior, while older machines with basically the same setup gets the availability information almost immediately.
It is unclear whether this is a server setting or desktop issue, as all new Windows 7/Outlook machines that are deployed from the WDS-server exhibits the same slow behavior.
Please advise any troubleshooting steps to investigate the very slow retrieval lookup of free/busy information from the Exchange server.

Hi,
Does this issue occur on OWA?
If no, it means the issue is mainly related to the Outlook client.
Regards,
Simon Wu
TechNet Community Support

Scanner(Warning) : 027: Unable to read the sequence number from the Workstation object.

Hi
We are having trouble storing inventory scans from some workstations.
We have a windows ONLY environment, with middle tier servers. (ZEN65SP1,
W2KSP4).
Some workstations are storing fine. The Storer function is working and we
can see the storer functions for the 'good' workstations in the Inventory
service window.
However some workstations can't store to the inventory db, but DO populate
eDir ZENworks inventory 'minimal information' but show "Scanner(Warning) :
027: Unable to read the sequence number from the Workstation object." in
the Scan Status...
The Inventory service window shows no attempt by these workstations - it's
almost as though the scan file is not arriving (though eDir knows/displays
the scan file name)
How does the workstation access the scandir in Windows only/middle tier
environment? Does the scan xml stream get sent to the MT via http and then
on to the scandir via CIFS?
Any suggestions/explanations welcome!!
Many thanks
David

David,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

027: Unable to read the sequence number from the Workstation object

Environment:
NW 6.5 sp4
Zen 6.5 sp1
We had a problem with our inventory server processing .STR files a couple
months ago - had to turn off inv. policies on workstations while we resolved
it. Now it's resolved and we're running inventory again. We have a large
number of workstations reporting this error:
027: Unable to read the sequence number from the Workstation object
They have no data in the DB, although they do have minimal scan info, and
the last scan status date matches that of the sequence number error.
I've seen this sporadically in the past and have been able to resolve it by
initiating a full scan on the individual workstation. However, that does
not seem to be making a difference this time.
Novell's troubleshooting document basically says see if the server's
running, and see if there's data for the workstation in the db. Then call
tech support.
Any other ideas?
~~~Nicoya...

Jared wrote:
> Nicoya Helm,
>
>> 027: Unable to read the sequence number from the Workstation object
>
> I am thinking that this can also mean a previous full scan was not
> found. Or maybe the STR file name is bad.
>
> This information is stored here
> HKEY_LOCAL_MACHINE\Software\Novell\Workstation
> Manager\InvScanner\"STRFileName"
The machines I'm troubleshooting have valid formats for their STR names,
but that doesn't necessarily mean they are valid STR sequence numbers.
Does removing the value in the reg key cause the STR file name to be
recreated?
>
> Because imaging is used, it's possible that this information is matching
> on some machines which could cause problems.
I've verified that none of our images contain the c:\zenworks history
folder, and we run a script that cleans up any zenworks items before
sysprep (i.e. makes sure there's no registration info on the
workstations, etc). Our imaging scripts also clear any ZIS info to
avoid any duplication as well, so I don't think imaging would be causing
this.
> I believe 6x also has a hist.ini file like 3x inventory does, you might
> delete the file also.
Good tip about the hist.ini file, I didn't know about that. It does not
solve the sequence number error, but it does seem to force a full scan
of the system and cause the new scan to be stored in the DB, which was
not happening before.
Thanks!

HT4539 how do I download information from the cloud. I just purchased a new phone?

How do you download information from the cloud? I just purchased a new phone?

What information are you referring to? You may mean restoring an iCloud backup from a previous device. Or you may mean adding iCloud calendars, contacts, etc. to your iPhone.
In the former case (restoring a backup), the setup assistant should walk you through that process.
In the latter case (adding contacts, etc.), simply set up your iPhone as an iCloud device in Settings > iCloud.

How to get information from ODBC sources to Forms Builder environment

Hi,
Could anyone help me, to get some examples or more information, that how can I get information from ODBC sources to Forms Builder environment. I have a need to read data for example to LOV.

If you are on Forms 6i you install the Oracle Client Adaptor from the Forms CD. You then have a way of connecting to ODBC datasources.
To connect to ODBC at the same time as you are connected to Oracle you can use the EXEC_SQL package to create a second connection via odbc and issue select statements against that datasource.

Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine

Hello,
When implementing a VDI solution, I'm getting an error on our virtualization host server. The error is:
Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine [VDI-PC].
Hresult 0x8000FFFF
Event ID 8467, Severity: Warning, Source: Microsoft-Windows-TerminalServices\TSV\VmHostAgent
This error happens every time a user or admin connects to a VDI desktop. This is a fresh install of Remote Desktop Services on completely fresh servers. This is in testing and we have not ever had it working before without the error.
Topolgy: Server2012 R2, Windows 7
Srv-RDCB1: Is the connection broker and Web Access server. It is Virtualized thru Hyper=V.
Srv-RDVH1: Is the virtualization host. It is a physical server. It also has a separated hyper-v role (for RDS VDI deployment).
Everything seems to be functional other than this error in the log, and I haven't found any information on what this could mean.
Any help is greatly appreciated, thanks!

Hello. I have this trouble too.
All roles on one server.
Deployment type - Quick start
Deployment Scenario Virtual mashine-based desktop deplyment
Reinstall all roles 2 times
Warning TerminalServices-TSV-VmHostAgent
8467 Orchestration
Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine [per-0] .
Hresult: 0x8000FFFF
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TerminalServices-TSV-VmHostAgent" Guid="{92618A87-2F6A-4B75-9AE2-E77BE7EAF43C}"
/>
<EventID>8467</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>22</Task>
<Opcode>14</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-11T13:24:45.579138000Z" />
<EventRecordID>1655</EventRecordID>
<Correlation
ActivityID="{F4200EF7-FEDD-4CAD-9F5D-6219A5F30000}" />
<Execution ProcessID="3164" ThreadID="13164" />
<Channel>Microsoft-Windows-TerminalServices-TSV-VmHostAgent/Operational</Channel>
<Computer>blade2.vzfei.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<EventXML xmlns="Event_NS">
<param1>per-0</param1>
<param2>0x8000ffff</param2>
</EventXML>
</UserData>
</Event>
In RD Gateway Manager, right-click on the RD RAP and click Properties. On Network Resources tab select
“Allow users to connect to any network resource”.
not work.

Error while deleting a row from the Entity Object

Hi OAF Guys,
i am unable to delete the newly created row from the entity object.
let me explain my scenario.
1. i have a table of which some of the columns are mandatory.
2. I am writing the code in the validateEntity to check wether the user really enter anything into the fields.
3. My problem is, when the user creates row and wanted to delete the row without entering any details, the validate entity of the EO gets fired which will not allows to delete the row.
Is there any workaround for this problem.
Regards,
Nagesh Manda.

Hi Tapash,
I am very sorry for not providing you the complete details of my scenario. Here i am explaining
1. what code you have placed while creating the row and in validation method on EOImpl.
while creating a new row i am initializing the primary key of the EO with the sequence value.
2.When you say, you are unable to delete the row, are you getting a error message ? if yes, custom message or fwk error ?
its not the fwk error, its the custom message which wrote in my validateEntity method of EO to check whether the user had entered all the necesary columns or not.
3.How are you trying to delete the row ?
while the user clicks on the delete switcher i am getting the primary key of the row and searching for the row in the vo and finally deleting it.
The problem arises when the user creates a row, and later doesnt want to enter the details and delete it. Here while deleting the row the validateEntity method of the EO gets fired and doesnt allow me to do so :(.
Any way appreciate your help tapash.
Regards,
Nagesh Manda.

Capturing information from the Resource Object forms

Similar Messages

Maybe you are looking for