Cark 91 and 6210 - No Sound

Hi everyone
recently bought a car from a trader with a Cark 91 fitted so not sure if it's in working order.
borrowed a 6210 which fits the cradle, the phone charges in the cradle but no sound from speaker when either making or receiving a call.
bought a new Cark 91 in box, never used before so should be ok and have replaced all the parts but still no sound from speaker apart from a crackle when the phone is placed into the cradle.
anyone have any ideas please?
intend buying a CA-55 and a CR-56 cradle so I can upgrade to a 6233 but would like to know the system is working as it should before I do this.
Help!!!!!!!!!!

Hi Danny
Have got my 6233 now and the CA-55 and CR-56 came in the post this morning. Have fitted both, the phone works fine and even the cd mutes when it rings!! only prob is when I put the phone in the holder a message comes up saying charging, 2 or 3 seconds later it goes off and another message saying charger not supported comes up, any clues please? according to the nokia website the CR-56 cradle charges the phone!!
Cheers
Graham

Similar Messages

Problem with rotation and keyboard click sound

Ok, there's still a problem with the rotation and keyboard click sound and I thought I had the problem fixed.
It's a serious bug when you want the keyboard click sound enbabled without having the rotation locked. I noticed this bug started when I had the previous iosinstalled 7.0.6.
Everytime I wanted to enable the keyboard click sound, I have to always go to settings and have lock rotation checked. And it would stay locked.
If I wanted to rotate my iPad, I have to have mute enabled, but no keyboard click sound.
I know it sounds confusing. I'm already confused... beh.

I completely forgot about that.
Thank you!

I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?

I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?

I used disk permission repair to try to resolve this as well as a 'soft' restart. Still have a grayed-out mute checkbox in the sound section of system preferences.

HP Pavilion dv6700 CTO Notebook PC and I hook to HDMI cable and connect to tv and get no sound

i have a HP Pavilion dv6700 CTO Entertainment Notebook PC and I hook to HDMI cable and connect to tv and get no sound when attached to tv. I attach the cable get the video but no sound. I check sound and do not see anything other than the altec lansing speckers and realtek. Th altec lansings are the default. Help

Hello gman0700.
Welcome to the HP Forums. I understand you are unable to produce audio through an HDMI connection. I apologize for the late response, but I will do my best to assist you. Before anything else, please answer these questions:
1. What is the current computer's operating system? Does the same behaviour occur on multiple operating systems?
2. The title seems to imply that there is no audio when connected to a television, using HDMI. Does this only occur when you connect to a television? Will it occur if you connect to something else using HDMI?
3. Have you tried connecting to a television using VGA or DVI? If so, what are the results?
As an additional suggestion, for now, I would review the television's manual to confirm that everything is correct from the television's standpoint.
Please post this information as soon as you can. Thank you posting on the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

No sound form :
- Speaker?
- Headphones?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Since updating to iOS 6 I no longer can hear the send and recieve text sounds when texting

Updated to IOS 6 yesterday and now I am having trouble hearing the text "swoosh" or whatever it is called while in a converstation the sound you hear when you send one or recieve one. Also when my phone is switched to vibrate mode when I receive a text message all my phone does is light up and it dosn't not vibrate which stinks cuz if it is my pocket I don't know if I'm getting a text message. I went into the message settings to try and set a vibrate tone for when recieveing a text and It won't even vibrate when I click on an option or click to create my own vibration pattern. My phone still however vibrates when I recieve an email or when someone calls me ect.... just not on texts and no sound when in a text conversation as in sent and recieved sounds. My sister, and both my parents updated to IOS 6 yesterday and they are having not probems of any sort? Anyone else have this problem and know of a solution? Ive already tried resetting my phone thinking maybe it was a glitch but still have the same problems.

I figured out my problem...... I have custom text tones set up for certain ppl and had the default text tone set to "none" well with the iOS6 update it made it so if your default text tone is set on "none" then you won't hear what I call the send and recieve text sounds when in a converstation... if you change the default text tone to any text tone other than "none" you will get your send and recieve sounds back.... kinda annoying if you don't won't random texts from ppl waking you up... so I made a custon text tone that is called silence with just recording a few seconds of dead noise then edited it and turned all the sound levels down to 0 and set that as my default text tone.... now I have the send and recieve text sounds in a conversation and everything is fine! Sorry Nehucskter the first time I had this problem thats the first thing I did was reboot my phone.... first thing you do for everything lol....

I purchased a movie from iTunes and when i try to play it on my mac or iphone its just black and has no sound...

I purchased a movie from iTunes and when i try to play it on my mac or iphone its just black and has no sound...
help please!

Are you going to Movies - Purchased or Computers - Movies ?
If you go to iTunes Store on your computer - Quicklinks - Purchased. Is it showing up there?
Is this a purchase or a rental?

I want to use a video projector with powerpoint can I use my mac to drive it- and what about sound?

I want to use a video projector with powerpoint can I use my mac to drive it- and what about sound?

Hi Scott,
You should be able to. If the projector has a speaker with acceptable sound, that's one option, otherwise powered speakers or a surround system.
What connections does the projector have?
Exactly which MBP do you have?

A workflow to burn AVCHD camcorder video and 5.1 sound to BluRay disc.

A workflow to burn AVCHD camcorder video and 5.1 sound to BluRay disc.
After weeks searching through many posts by the Forum’s experts with Final Cut Pro and Compressor, I have a crude workflow that seems to work for me, and might be of interest to others. This information I couldn’t find in the Help files of either FCP or Compressor, and would appreciate feedback on other options. Thanks to the Forum contributors who have helped me with suggestions.
I have successfully burned a BluRay DVD of the video and audio outputs of my new Panasonic AVCHD camcorder, that is, 1920x1080 video and 5.1 surround sound, using Final Cut Studio 2 (FCP 7.0.2, Compressor 3.5.4.) on an Intel iMac with OS 10.6.3
Using AUNSOFT-PAVTUBE or CLIPWRAP, I converted the camcorder’s MTS files to ProRes 422 .mov files containing 5.1 six channels of audio.
In FCPro, set the Sequence / Settings / Audio Outputs to 5.1 Monitoring:
     L+R Stereo,     Stereo
     Center             Dual Mono
     LFE                Dual Mono
     Ls +Rs            Stereo
Uncheck the “Downmix…to Stereo” in Warning box that pops up when this step is completed.
Drag the ProRes .mov file into the time line of FCP 7:
The next steps are important for assigning each of the six audio channels to the Dolby 5.1 configuration (L, R, C, Lfe, Ls, Rs). This step was new to me and something I couldn’t find in the FCPro or Compressor Help file manual. If anyone can reference a page number, I would appreciate that info.
In the FCP time line, unlink the video from the audio channels (Linked Selection) in the upper right corner of the FCP time line.
Select each audio channel, then right click in the area of the blank column near the padlock. Assign A1, A2, A3 etc to each of the audio channels as they fit the Dolby configuration ( L+R, C, Lfe, Ls+Rs) This process is kind of clunky and it may take patience to accomplish.
The best Forum ideas that I could find for setting up the six channel audio came from the following posts which I credit for their help:
https://discussions.apple.com/message/9095726#9095726
https://discussions.apple.com/message/12525373#12525373
In FCPro, Mark In and Out points, Select In to Out
Under File / Share option ………Select BluRay job……then Select either “Export” or “Send to Compressor”
(Note: At this point, the Option Export which enables FCPro to burn a BluRay DVD, seems to work well, and the resulting DVD video and six channels of audio seems as good as that produced by the more complicated option of “Send to Compressor”……..which is described below.)
If the Send to Compressor option is selected, Compressor is automatically started by this selection. At this point, do not Quit FCPro, because Compressor needs to transfer file data (or something like that) to Compressor.
In the job pane of Compressor, will exist two targets, H264 for BluRay and Dolby Digital.
I deleted the Dolby Digital and replaced it with Dolby Digital Professional Auto.
Clicking any where in the Sequence 1 job pane (not in H264 nor Dolby target rows) will reveal the A/V attributes:
Under the Job Action tab, select the BluRay unit that will eventually do the burning.
Clicking on the target H264 for BluRay located in the larger Job Pane reveals the settings I chose:
Clicking on the target Dolby Digital Professional (Auto) reveals these settings I chose:
I left settings on the Bitstream tab untouched. However the Preprocessing tab, I set the Compression Preset to “None”.
I found that turning on the BluRay burner with a preloaded BD/RE is best to do at this time, or even better, to energize the burner at the time that the “Send to Compressor” function is activated.
When settings are complete, select “Submit” in the lower corner of the Compressor larger pane and processing will begin, and a status pane indicating time elapsed and time remaining will appear. These estimates are not very accurate.
I have found that my 1 minute test video was initially estimated to require about two hours of processing time, but actually required only 1 hour which is still unusually long. Based on my experience, be prepared for an “overnight” processing to occur for longer movie durations.
This is the part of the overall process I need to understand better: How to estimate the duration to encode and burn 1 minute of video / audio? This 1 hour duration for 1 minute of video/audio was the same whether I SHARE-Exported to FCPro to burn DVD, or SHARE-Send to Compressor option.
Wondering if the encoding of the six 5.1 audio channels caused the lengthy processing(?). Perhaps settings that I made in Compressor affected time to process and burn.
Finally, I hope this poorly written process will help someone who has been looking for the same information as I had been. I would appreciate feedback from those who have already done this; what OS are you using, what hardware are you using? What software package have you tried. And lastly, Thanks to all who contribute to these Community Forums, who take the time to detail their processes. You all have helped me to get this far.
BoBo

Go to https://discussions.apple.com/thread/4719249
BoBo

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

When I open a music in itunes got a message "connecting to apple tv" and got no sound from my mac

When I open a music in itunes got a message "connecting to apple tv" and got no sound from my mac.

AirPlay isn't anything to do with homesharing. (Home sharing lets you share the iTunes libraries on computers)
Basic AirPlay: Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
Mirroring: When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Restart your mobile device.

Theres something wrong with my ipad lock and keypad click sound

If i turn my ipad off, then back on again, theres a problem with the sound of the keyboard and lock clicks

When you lose keyboard clicks and the lock sounds, those are system sounds and they can be controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
However, if the problem is intermittent, I would first try resetting the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen, then let go of the buttons. That might cure the problem.
If it doesn't, then I would try resetting all settings. No data will be lost, but you will he to enter all of the device preferences and settings again. Settings>General>Reset>Reset All Settings.

Is it possible to play my guitar and have the sound changed to different instrument like a sax? Like an emulator.

Is it possible to play my guitar and have the sound changed to different instrument like a sax? Have my Mac act as an emulator. I'm a guitar player, not a sax player, but I want a sax solo in my song.

You'd need a midi guitar for that. GarageBand does not create midi from audio. Use a different application, like Finale to create a midi file from your Guitar audio file.
Or play the sax track using a midi keyboard or simply GarageBand's musical typing. You can use the track editor to add expression and articulation afterwards.

Airport Express icw wireless modem and B&O sound system

Hi all,
I am considering buying the Airport Extreme. Main reasons are:
1) playing iTunes via the sound system and
2) wireless connection possibility to external hard disc.
I will use it in combination with my current wireless modem and B&O sound system.
From where my internet enters the house it is quite a distance to the sound system location that I can not easily (esthetically acceptable) connect to the sound system.
My main questions are:
1) Is Airport Extreme the right system to buy?
2) Can the Airport Extreme audio output signals be combined through 1 cable for both iTunes and cable radio?
3) Can I use the Airport Extreme device for playing movies on my television as well?
I am quite an amature if it comes down to setting up networks and systems, so all (low key) tips are more than welcome. Many thanks in advance!
Kindest regards,
Robbie W

Ummm.....
The express will not extend your modem, since Apple hasn't shipped its own brand modem for years. You can't extend third party routers. You can try a few tricks if you have ethernet cables though...

I plugged a HDM1 cable from the Sony flat screen TV into a mac pro book and get not sound. great picture. Help?

I plugged a HDM1 cable from the Sony flat screen TV into a mac pro book and get not sound. great picture. Help?

Mac computers: Frequently asked questions about using ...

Cark 91 and 6210 - No Sound

Similar Messages

Maybe you are looking for