Carriage jam and carriage stall on hp m7590

I have an officejet all-in-one 7590 that keeps reading carriage jam and carriage stall. Any thoughts on how to resolve.

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

H470 mobile printer wont print. "Carriage Stalled"

Officejet H470 will not print. Pop up error says "Carriage Stalled". Power button and Resume button blinking. Cartridge lights on. Makes a clicking sound when i push resume but carriage wont move. I've unplugged it, moved carriage back and forth, there's no paper jams....

Try using the steps as explained in the link below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01554876&tmp_task=solveCategory&cc=us&dlc=en&la...
hope this helps you.
I work for HP but my posts and replies are my own thoughts.
If I have solved your issue, please feel free to provide kudos
Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

Carriage Stalled on Photosmart C309a

Message starts with "Paper Jam" on front display of printer. Cannot find any paper where it does not belong. The next message appears on the computer: "Carriage stall. The print cartridge cradle cannot move."
The carriage is stuck on the right side, not accessible because it is parked under a permanent plastic "house." All the troubleshooting tips mention the carriage must move. Yes, but how do I make it move without forcing it and breaking something?
There was a post last month, someone had the same problem and managed to resolve it without explaining how.
The printer worked beautifully UNTIL I received a three-page fax. That carriage parked and never moved again. Have not been able to use the machine since then.
Any assistance is appreciated.
Thank you
KB

Hi - Go ahead and try the steps in this document. It sounds like you may have performed a few of the steps, but it also talks about re-installing the printhead assembly and performing a printer reset.
If the steps in this document don't resolve the issue, you'll want to contact support to see if they have any additional suggestions, and if they don't they can also help you get the printer serviced.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Carriage Stall

My Hp 6310 printer is working OK but I keep receiving an error message re: carriage jam. I have done everything on the HP support site to correct the problem. I can print a self-test page and finally was able to align the cartridges. In the past the cartridges moved when I lifted the cover; not now. The HP printer utility says "carriage stall" for status. Any ideas would be most appreciated. Thanks.

I don't mean for you to repeat steps you've already been told, but just to make sure all the steps have been followed, here's a video explaining how to fix recurring carriage jams. Have you already tried all these steps?
I am an HP employee.

Carriage stall clear carriage

Hi.
I am getting the error message, 'Carriage stall....clear carriage obstruction and press OK to continue'. So I checked HP support to solve this problem and got as far as, "press menu and print test page'. When I press menu, it does not come up so cannot print test page. I did clear a tiny piece of paper from the carriage.
Hope to get help before I have to get an engineer in.
Dave.

CaptainTJ wrote:
hi,
You don't indicate which product you have, but most of the carriage jam or paper jam support documents from the product support page havve documents about clearing the paper jam or carriage jam.
It is good that you found a "little piece" of paper, sometimes this haunts you forever until you find it. If I remember correctly, most of the printers require a "reset" to get the printer functioning.
To do this, you'd unplug the printer from the power source (wall or back of printer), wait 60 seconds, plug the power back in again (if the printer doesn't power on automatically - turn it on), the printer should go through some setting up activitity. I hope this helps.
If not, go to the Support and Drivers section of hp.com, i
http://h10025.www1.hp.com/ewfrf/wc/siteHome?lc=en&dlc=en&cc=us&product=top
nput your product number and press the next button. In the search field for your product, search for carriage jam or paper jam... a couple of good documents should show up.
Thanks Captain TJ.
Sorry, should have said, Phtosmart B9180.
I have done all you suggested as per the support pages but no good. I get to the point where I should print a test page but when I press the menu button, there is no response.

HP 4185 deskjet all-in-one " Carriage Stalled"

Hello,
I have HP all in one 4185,i have recently encountered the problem of "CARRIAGE STALLED".I changed my black ink cartridge but its a while now,and i have started facing this problem about a week ago.
Printer wont print a single page and it displays the error msg,it completely depends on printer's mood when it wants to print,yes it makes some unusual sounds too.I have updated to latest version of SOLUTION CENTRE and have tried cleaning the rollers by opening the rear door of printer.
I have WinXp Sp2 and i think i have performed all the steps available on internet....Please Help!

Thank you for clarifying.
I would suggest following these steps prior trying a clean boot:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
If the issue persists, open the device manager and expend the Processors section.
What processor you have on your PC?
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet H470 carriage stalled

On screen message says "carriage stalled". Green 'power on' light is flashing, as is the orange/red error light. Both ink cartridge lights are on. When I open the cover the ink cartridges usually move to the center, but not this time. Turned it off and unplugged, then back on several times - nothing. I manually slid the cartridges to the center and then to the other side and back - they did not appear to be stuck- then tried it all again. They still wouldn't move on their own. Getting the flashlight out and slowly moving cartridges to center again I noticed what appears to be something looking like a twist tie laying under where the cartridges slide (on the right side). Upon closer examination I can see one just like it on the left side under what appears to be a gear. How did the one on the right side come undone and where do I put it to make this thing work right, or is this not the problem. There is a small door on the bottom of the printer on the right side, but when I open it I can see the gear but no clue where this 'twist tie' goes. HELP!!!
Thanks

Hi cr180,
1) For the LED blinking, perhaps this link can answer your query on what is it and how to resolve.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01182351&tmp_task=solveCategory&cc=us&dlc=en&ju...
2) For the twist tie you mentioned, on the left side is it brown color, whilst the one on the right is black color (but to the extreme right)?
3) For the bottom cover on the right which you open, it is actually for your to replace the ink service module.
(Look out for this "Issue: The Resume light is on or blinks, the Right Cartridge light blinks, and the Power light is on" on the below mentioned link)
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01182351&tmp_task=solveCategory&cc=us&dlc=en&ju...
Although I am an HP employee, I speak for myself.

HP Officejet H470 "Carriage stalled"

Officejet H470, Windows XP. HP MINI. Printer message "Carriage Stalled". Carriage stuck on left hand side. Carriage will not move. Re-loaded print driver, restarted printer. Power light blinking gree, cartridge lights solid, resume light blinking. Carriage remains stuck on left side, and won't move, after repeated attempts to move it.
Thanks,
Mike

Hi gomike,
Please follow the steps in this document: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01554876&cc=us&dlc=en&lc=en&product=3434455&tmp...
Start at Solution 2 as you have already performed the steps in Solution 1.
Please let me know if still having difficulties.
Thanks!
I am an HP Employee
Click the KUDOS Star to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"

'Ink Cartridge Carriage Stalled' - Repeated Error Message

DeskJet 2050 All-In-One J510C. Serial CN07N2B3CF. FPU CH350 or 355, -64001 Having just run HP Print & Scan Doctor!I still keep getting this message.It must be erroneous, because when I click "OK" it rattles and whirrs and then carries on as normal, with a quality print. BTW:- searched Support numerous times with NO RELEVANT results, hence this post. How do I resolve "Ink Cartridge Carriage Stalled" ? (Previously, downloading & updating software chased it away. So I did that yesterday, again!) Please advise your correction to this irritation.Thanx.

NEW info!
computer still says yellow ink is out...print with Black only option and I'm able to print regularly from another computer tied to the same printer.
But just now I attempted to print a picture. The screen said the yellow ink was out and would I like to print using Black only? I clicked Black (just to get something) and the device printed a color picture. Thanks but what's up?

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

Make an appointment at the genius bar and get the phone replaced.

Trying to restore iphone 4 on Windows 7, 64-bit. It goes so far and then stalls. Have updated itunes, unplugged other USBs. this is my fourth attempt. Any suggestions?

Trying to restore iphone 4 on Windows 7, 64-bit. It goes so far and then stalls. Have updated itunes, unplugged other USBs. this is my fourth attempt. Any suggestions?

Disable your firewall and antivirus.

Error message: itunes library .itl cannot be read because it was created by a newer version. I downloaded and in stalled the latest version of itunes and it did not help. What now?

error message: itunes library .itl cannot be read because it was created by a newer version. I downloaded and in stalled the latest version of itunes and it did not help. What now?

Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

Payment Wizard- If there is a check jam and the run was executed.

If there was a check jam and the check run was executed, can they run the payment wizard
using the saved executed run? What do they do?

You flag the check(s) as damaged and then you can re-print them and remember to verify the new Chk starting number.

Join on all_synonyms and all_objects stalls

I have used this query for many years to see what synonyms can access tables and views within a user account. It has worked through Oracle 8 up to Oracle 11.2.0.3.0 Now, on one database, Oracle 11.2.0.3.0, this select stalls:
Select 'S' IND from dual where exists
(select null from all_synonyms s, all_objects o
   where :b1_owner in(s.owner,s.table_owner)
     and s.table_owner=o.owner
     and s.table_name=o.object_name
     and o.object_type in('TABLE','VIEW'));I tried this select, and it stalls too:
Select s.table_owner,s.table_name
from all_synonyms s
where :b1_owner in(s.owner,s.table_owner)
   and (s.table_owner, s.table_name)
     in(select o.owner,o.object_name
       from all_objects o
       where o.object_type in('TABLE','VIEW')
         and o.owner not in('SYS','SYSTEM') );The same select works on a different instance, same version of the database, 11.2.0.3.0
One version is considered "production", the other "development".
Here is the SQL Plus script that works:
connect abc_def/pppwwwwddd@example88
VARIABLE B1_OWNER VARCHAR2(30)
Exec :B1_OWNER := 'ABC_DEF';
select count(*)
    from all_synonyms s
    where :b1_owner in(s.owner,s.table_owner);
COUNT(*)
         0
select count(*)
    from all_objects o
    where o.object_type in('TABLE','VIEW')
    and o.owner not in('SYS','SYSTEM');
COUNT(*)
      5814Any ideas why it would stall when joined? ...and only on the one database?

Scott-
Now this is a bit strange. I just checked and APPUSER has select, insert, update and delete directly on tables (not through a role) and has private synonyms for the tables. I realize that left out some details, like we are using APEX 2.2.1 (planning on upgrading to 3.1 "soon") and running on a 9.2.0.7 database. Are there any issues/limitations with 2.2.1 or our 9i database?
Greg

Unable to verify burn, and DU stalling?

Heres my problem(s). (semi related).
I wanted to install XP on my 2007(8)? Mac mini. and i have done so before. But now here is my problem.
I have a XP iso. So i tried to use DU to burn it to a cd. Well, all was fine until it was done verifying, at this point, it said it was unable to verify (don't remember error, sorry) So, i tried to burn via my New MBP, burned just fine.
Next, i went into boot camp, pert. the drive. gave it 30gigs. When i rebooted, the screen was all black, with a white dash, blinking.
I google this. And people are saying I need to repair permissions. SO i verify permissions and sure enough, need to repair. So, i'm repairing right now, and the progress bar is stalled at 1 min left, (right under the 'i' in 'disk'.) , and its stalled on:
Well, never mind. It was stalled on a warning, but now its log moved, but bar is still stalled. guess ill wait more. but i do have 1 more question.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
i can has fix?
(incase you don't want to re-read/read)
1. Possible reasons my Mac mini cant burn anymore? Will not verify and Will not read disk after.
2. When i boot from my XP cd, the screen is black, with a white dash.
3. Mysterious DU warning? (see above)
Any help is welcome <3
Edit: THe repair just finished....:s dont laugh.
Message was edited by: DeeJaayMac

Heres my problem(s). (semi related).
I wanted to install XP on my 2007(8)? Mac mini. and i have done so before. But now here is my problem.
I have a XP iso. So i tried to use DU to burn it to a cd. Well, all was fine until it was done verifying, at this point, it said it was unable to verify (don't remember error, sorry) So, i tried to burn via my New MBP, burned just fine.
Next, i went into boot camp, pert. the drive. gave it 30gigs. When i rebooted, the screen was all black, with a white dash, blinking.
I google this. And people are saying I need to repair permissions. SO i verify permissions and sure enough, need to repair. So, i'm repairing right now, and the progress bar is stalled at 1 min left, (right under the 'i' in 'disk'.) , and its stalled on:
Well, never mind. It was stalled on a warning, but now its log moved, but bar is still stalled. guess ill wait more. but i do have 1 more question.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
i can has fix?
(incase you don't want to re-read/read)
1. Possible reasons my Mac mini cant burn anymore? Will not verify and Will not read disk after.
2. When i boot from my XP cd, the screen is black, with a white dash.
3. Mysterious DU warning? (see above)
Any help is welcome <3
Edit: THe repair just finished....:s dont laugh.
Message was edited by: DeeJaayMac

Carriage jam and carriage stall on hp m7590

Similar Messages

Maybe you are looking for