CATA - No records for transfer to PS Issue

Few postings were made in CAT2 against a 'Network - Activity'. After CATA is run, there is no CO document generated. For CO document to be generated, number range is maintained for trx RKL in KANK. I have checked CATSCO, PTEX2000 tables. there is no data posted in these tables either. I see a message "No records for transfer to PS". The data is present in CATSDB table though; with status (30 - APPROVED).
Not even the Activity type price maintained (KP26) is being triggered / displayed in CATA.
I have checked the below threads, but still unable to figure out what the reason for this issue is.
http://forums.sdn.sap.com/thread.jspa?threadID=1926978
http://forums.sdn.sap.com/thread.jspa?threadID=1849012
Any suggestions plz.

Refer these notes,
Note 1246420 - Composite SAP Note : Cross Application Time Sheet Docum.
Note 166961 - CATS:Error LR121 durng transfer in target applicatn
Also refer the 2nd point in the Solution in this note,
Note 555947 - PS/PM: Confirmation by CATS (Consulting note). Maybe this is the reason you are getting this error.
Hope it helps.
Post the error message number to analyse further.

Similar Messages

Multiple records for a single transaction - Issue in LSMW

Hi,
i'm facing a issue in LSMW
i have the data coming up in the flat file. the data which constitutes the single transaction consists of data from multiple records from the flat file..
suppose we have 10 records in the flat file... and all the 10 records related to ony 2 transactions i.e say 6 records to first transaction and next 4 records to next transaction.
we have a direct input method to handle this data like field1 for first record, field2 for 2nd record and so on...
while uploading, we will get all the records one by one into our source structure. My question is can we handle this scenario in lsmw? if yes, pls suggest
Thanks in advance
Shekhar

Hi Kris,
this is regarding the asset creation via AS01..
we are getting the flat file in that way. Lets assume like this:
suppose for one transaction we may need to fill 5 depreciation keys and for another option only 3 dep. keys we need to fill.
then in the flat file, we can get like 5 records for first transaction i.e asset and 3 records for 2nd transaction
Can we handle this via lsmw
Regards
shekhar

Automatic PO from PR from MRP for transfer between plants

Hi,
We want to use the automatic creation PO with tcode ME59. this scenario is clear when the purchase is from a supplier. but ¿this can be used also for transfer between plants?
For example we don´t have info records for transfer this material to one plant to another and this is a requirement in automatic po
The PO type is also different when transfering the materials between plants
The PO does not relate a supplier in header, instead it has the plant code.
However I tried to execute the automatic creation of PO with ME59 and I obtain the error below
Thanks
Jorge G

Use ME59N,
But before using ME59N, you have to configure something, we know in ME59N, system will take default document type as NB automatically. (Check the sap note 924105, 114213, 994209)
You have to set the control T for the document type, so system will take the supplying plant instead of vendor.
Only then you can create automatic PO from ME59N.
I've tested that and I've done it successfully.
PO

ME01 LSMW multiple record for same material issue.

Hi Experts,
I have an issue with multiple record for the same material and plant when I upload the data from the file. Lets I have the records.
Material        Plant              Start date      Enddate        Vendor          Porg.
1     0010     20060101     99991231     2     0010
1     0010     20060101     99991231     3     0010
When I upload the above data there are 2 IDOCs created when I am using the method LSMW-IDOC method, but only last record is getting updated and the first one is not getting updated in ME01 souce list. But I am getting the success message for both IDOC in LSMW. So I am not sure how to fix this why only last record is updated and not other records??

why do you have 2 idocs?
wouldn't be 1 idoc with 2 items be more logical?
1 record in structure E1EORDH
and 2 records in structure E1EORDM
I believe your 2 IDOCs get posted, but I think your 2nd Idoc overwrites the values entered from the first IDOC.

Transfer price records for materials

\We have activated transfer pricing for profit centres. However, all materials transfer between profit centres are not subject to transfer pricing.
But while doing any strock transfer between plants & profit centres of materials, system is error messaging that no transfer price records are maintained. It is obviously not possible to maintain price records for all materials which may be around 4000. What is the way out ?

hi..
Goto Profit Centre Accounting > Tools > Customer Enhancement > Develop Enhance for PCA
Here you will find
Document changes for data transfer (PCA00001)
Assignment of a representative material (PCA00002)
Determination of transfer prices (PCATP001)
Enhancement in the authorization check (PCAAUTHO)
Change to selection criteria for data transfer (PCASELEK)
For additional information about this enhancement, see Choose Actitvies for Exit PCASELEK
Apply as per your requirement.
kkumar

How can we integrate CATS & PPM and to retrieve CATS time recording data in PPM ?

Dear experts,
Following the previous question of Ruxandra Petrina called "record times with CATS", I am facing an issue with the report DPR_CATS_CPR_TRANSF : it shows nothing despite I activated PPM accounting integration.
There are the steps I followed, I really don't understand what is missing. In PPM I can transfer and assign my projects to WBS elements automatically or manually.
1. We allowed time confirmation for projects
2. We replicated personal number as business partners
3. We activated worklists and project assignments @ data entry profiles
4. We set up ALE & RFC connections
5. We activated the integration scenarios on WBS element : automatic and manual creation of WBS element assigned to PPM elements. Then we set up data profiles for time recording in cat2.
6. We enter times, we released it (approval is not required) + saving
7; We launch the program in SE38 of both ERP or SOLMAN systems : NOTHING appears.
Our goal is to see the times recorded in CATS in the Confirmed work field of PPM.
Can you please help me out with this issue ?
Many thanks in advance.
Best,
Cassoké

Hi Cassoke,
If tasks assigned to a user is not listed in CAT2 worklist, then first we need to ensure that the tasks are displayed in the worklist. So the user confirm the times for the tasks using this list and after that only we should be running the report 'DPR_CATS_CPR_TRANF' to transfer the actual times entered by user in CAT2 to PPM project task.
To integrate CATS with PPM, you need to follow these steps.
Customisations:
1) Enable 'Time recording' for tasks & 'Account integration' in project type
2) Customisation related to 'Accounting integration' to be carried out (either single object / Hierarchical controlling, for testing better to use single object - Internal order, since it is easier)
3) Create a time sheet data entry profile
(Refer thread Record working times with CATS for details)
4) Ensure all object links(internal order / WBS) RFC destinations are updated correctly.
Master data:
Business partners creation with BUP003-Employee role & link to HR personnel number
(This is not required if HR integration is activated, since the system creates the BP's automatically. But manually we need to validate the BP's for linkage with few users)
Project:
1) Create project using customised project type (where time recording/accounting integration is enabled)
2) Structure the project with phase/tasks
3) Update duration/work etc., to the tasks
3) Create project roles & staff a resource (BP which is validated for HR personnel number linkage).
4) Assign task to project role with resource in Project role-->task tab
6) Release the project definition and also check for phase/tasks release
7) Change the status of project definition to 'Flag for transfer' (Can be done before project release also)
8) Check whether the internal order / PS project with WBS is created in ERP system(Based on customisation) and linked to project. Check can be made in accounting tab of the project. (If it is not created, then check for object link RFC destination correctness)
In case of automatic internal order creation process, you need to enter the org unit. data in project definition-->additional data of the project.
CATS:
After completing all the steps, the task assigned to the user will appear in the CAT2 transaction.
1) User can confirm the task with actual hours.
2) Run the CATS transfer report mentioned above to update the data in PPM project.
About SOLMAN integration, you can refer to this presentation also.
http://www.sapsa.se/wp-content/uploads/2013/09/9.-ITPPM@SAPSA_131119_IngoPfeiffer.pdf
Regards,
Ravi

Pulling records where number of records for unique ID = 6

I have a table that contains address information for everyone in the system. It has numerous fields, though I've only included a few in the create table query below for the sake of brevity. The PIDM uniquely identifies each record as belonging to a particular person in the database. A person can have multiple addresses in the table, though we normally do not allow them to have more than one active address of a particular ATYP_CODE. Again, I am doing this here for the sake of brevity. What I need to do is pull all the records for each PIDM, but only where there are >= 6 records per PIDM. The user doesn't care if the data are pivoted (I can do that part if needed). Pulling the actual data isn't the issue. I just need a little help figuring out how to get only the records of PIDMs with six or more records in the table. So, from the example data below, the records for PIDM 12345 and 34567 are the ones that should be in the output, but the ones from PIDM 23456 should not.
DROP TABLE SPRADDR;
CREATE TABLE SPRADDR
(PIDM              NUMBER(8),
ATYP_CODE     VARCHAR2(2 CHAR),
STREETLINE1   VARCHAR2(60 CHAR),
CITY              VARCHAR2(60 CHAR),
STATE              VARCHAR2(2 CHAR),
ZIP              VARCHAR2(10));
INSERT INTO SPRADDR VALUES (12345,'PR','1 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (12345,'MA','1 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (12345,'BU','1 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (12345,'PR','2 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (12345,'MA','3 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (12345,'PR','4 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (23456,'PR','1 MAIN','KENT','OH','44240');
INSERT INTO SPRADDR VALUES (23456,'MA','1 MAIN','KENT','OH','44240');
INSERT INTO SPRADDR VALUES (23456,'BU','1 MAIN','KENT','OH','44240');
INSERT INTO SPRADDR VALUES (34567,'PR','1 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (34567,'MA','1 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (34567,'BU','1 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (34567,'PR','2 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (34567,'MA','3 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (34567,'PR','4 MAIN','CANFIELD','OH','44406');
INSERT INTO SPRADDR VALUES (34567,'PR','6 MAIN','CANFIELD','OH','44406');
COMMIT;I'd greatly appreciate any help you might be able to provide. I'm sure this is easy, but what I've done so far has not worked and I'm not including the code I tried because it's totally cockeyed and not working at all.
Thanks,
Michelle Craig
Data Coordinator
Admissions Operations and Transfer Systems
Kent State University

PIDM 12345 and 34567 are the ones that should.Why 12345? It is repeated 6 times where you asked for > 6. Anyway:
SQL> select *
2    from (
3           select s.*,
4                   count(*) over(partition by pidm) cnt
5             from spraddr s
6          )
7    where cnt > 6
8    order by pidm
9 /
      PIDM AT STREETLINE1     CITY                 ST ZIP               CNT
     34567 PR 1 MAIN          CANFIELD             OH 44406               7
     34567 MA 1 MAIN          CANFIELD             OH 44406               7
     34567 BU 1 MAIN          CANFIELD             OH 44406               7
     34567 PR 2 MAIN          CANFIELD             OH 44406               7
     34567 MA 3 MAIN          CANFIELD             OH 44406               7
     34567 PR 4 MAIN          CANFIELD             OH 44406               7
     34567 PR 6 MAIN          CANFIELD             OH 44406               7
7 rows selected.
SQL> select *
2    from (
3           select s.*,
4                   count(*) over(partition by pidm) cnt
5             from spraddr s
6          )
7    where cnt >= 6
8    order by pidm
9 /
      PIDM AT STREETLINE1     CITY                 ST ZIP               CNT
     12345 PR 1 MAIN          CANFIELD             OH 44406               6
     12345 MA 1 MAIN          CANFIELD             OH 44406               6
     12345 BU 1 MAIN          CANFIELD             OH 44406               6
     12345 PR 2 MAIN          CANFIELD             OH 44406               6
     12345 MA 3 MAIN          CANFIELD             OH 44406               6
     12345 PR 4 MAIN          CANFIELD             OH 44406               6
     34567 PR 1 MAIN          CANFIELD             OH 44406               7
     34567 MA 1 MAIN          CANFIELD             OH 44406               7
      PIDM AT STREETLINE1     CITY                 ST ZIP               CNT
     34567 BU 1 MAIN          CANFIELD             OH 44406               7
     34567 PR 2 MAIN          CANFIELD             OH 44406               7
     34567 MA 3 MAIN          CANFIELD             OH 44406               7
     34567 PR 4 MAIN          CANFIELD             OH 44406               7
     34567 PR 6 MAIN          CANFIELD             OH 44406               7
13 rows selected.
SQL> SY.
Edited by: Solomon Yakobson on May 10, 2012 10:02 AM

Would like to obtain Audition 1.5 version for transfer of LP"S to CD"S.

Would like to obtain ADOBE AUDITION 1.5 version for transfer of LP's to CD's. Have over 200 classical LP's, are living in a retirement village and no place to store those LP's. Can some one out there please help???

Hi Fred,
quite a few here have 1.5's, but we can not legally sell them because our
later versions are upgrades and most here also need to keep them installed
and running because we may need to re-open projects made in them.
Adobe Audition is an excellent tool for what you want to do, but it is not
the only tool for it on the market and it is Adobes business choice - quite
a few here disagree in it, but we are just users/customers - not to cater
for "household restoration". They have left that market niche to Magix Audio
Restoration Suite and Goldwave.
In my opinion, and it is a skilled opinion, what matters in making a
transfer of vinyl is to get a good cartridge on a good tonearm on a good
grammophone deck and a good riaa preamp and then make a clean, unclipped,
recording via a good sound card of a well cleaned record.
I then use "fix single click" functionality to handle the few large clicks,
and - because I happen to have a Bruel & Kjaer test record that I got at an
audio demonstration 30 years ago - correct the known frequency response
aberrations of the actual cartridge and the actual riaa preamp,
In my professional opinion any further processing tends to cause a loss of
perceived quality, you can not treat ""crackle"" without also loosing some
of the sound of the violin and brass transients fare no better. Now that I
have A3 there are phase correction things that I might want to try because
A3 offers at least one correction that deals with what may have gone wrong
in the original recording. However please DO understand and remember that it
is better not to process than to process incorrectly or inadequately .... do
no harm.
Also using audio software properly actually takes time to learn. It appears
that what you need is a household type software implement, Adobe have made
the business choice of not currently offering such. Two such tools
suggested, there are qute many other ways to do the same in, including
simply recording with Audiograbber and editing with the sound editor that
comes with some CD burning software and doing nothing about any clicks, just
allow them the headroom they need to remain unclipped for easy treatment
later.
Kind regards
Peter Larsen

Making system to use the latest Infotype Record for the Current Period

Hello,
I would like to know how the system behave if there is a record modified in the middle of the Pay Period, which record would the PY schema use? Ex: in IT0009 EE has selected multiple Bank Transfer. He say 100$ Bank 1 and Rest to Bank 2. In the middle if the Pay period, the EE comes and makes changes to his Bank Transfer, as he closed the account in Bank1, he creates new Bank and transfers 100$. Now when the PY run, it think both Banks (Bank1 prev and Bank 1 current ) are valid and tries to send 100$ to each back and sends rest to Bank2. Which is not correct. This issue happens when someone changes their record in the middle of the period. So It is assumed to change the process to not to change in the middle of the period. It has to be effecting of 1st of next period.
But I want to check is there anyway we can make the system to use the latest one if it finds multiple record for the same period?
any suggestion please.
Thank you.
Raj

Hi Donnie,
This system actually delimits the previous record but since the change is happened in the middle of the period, but record are considered as active.
For Ex: The Pay Period is 01/01/2009 to 01/15/2009 and There was a record for Bank1 for that period and user comes and creates a new record on 01/05/2009 for Bank1. Now for this payperiod since its with the period both records are becoming active. So system uses both the records and deducts. Hope you get what I'm saying.
Thanks,
Raj

How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade?

Dear wise & wondeful people:
How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade? Half of my contacts, notes, ect. were on my iCloud so have happily moved to my new iPhone but the rest are completely resistant. For example, on my iCloud I have 14 missing contacts starting with the letter A alone, however they are happily viewable on my old iPhone 4S and won't budge over into the iCloud.
There are also 3 notes missing yet still acessible on my onld iPhone 4S, the list goes on.
Your help would be most appreciated. Thank you so much.
BCHR

Hi BCHR,
If you are having issues transfering your content from your old iPhone onto iCloud so it can be transfered to your new iPhone, you may find the following articles helpful:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/TS3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
iCloud: Notes overview
http://support.apple.com/kb/PH12081
Regards,
- Brenden

Movement type for transfer of stock from Stock-in-transit to Vendor

Hello,
Is there any movement type for transfer of stock from Stock-in-transit to Vendor.
For internal transfer from Plant to Plant we follow Purchase Requisition -> Stock Transfer Order (PO Modified) -> Delivery (VL04) -> MIGO (Goods Receipt against Delivery) method.
The problem arises when the actual delivery quantity is less then what is entered in the system (due to clerical error). That is, physically less quantity were dispatched and received at the receiving plant. Now the balance quantity is lying as stock-in-transit. To clear it we are receiving the material and using transfer posting for plant to plant transfer. Though physically there is no transfer of goods. Now we do not want to receive the material instead we want it to transfer from stock in transit to the supplying plant. Is it possible ?
Thanks.
Ashish

Hi Ashish,
When You issue the stock, the accounting document is posted . There is no accounting entires when you do Goods receipt at receving plant . In case , we are developing to make it happen , I feel it may have impact on the Material Valuation aspects .
Hence, I feel it is better to adopt any of the following 2 options.
1) Cancellation of the entire delivery and make new delivery or 2) Receive the entire qty at the receiving plant and decide what you want to do with the unavl qty . For example in your case of loss of material due to accident , you can scrap the material in the receving plant itself or return the material back to the sending plant.
Regards
Mani

Troubleshoot: How to process messages in "Recorded for Outbound processing"

Dear Experts,
I have File >XI(3.0)>IDoc scenario with 10-25 interfaces. Per interface an average of 200 msges.
Now we have an issue. from past 6 days all the messages for one of the interfaces are in status: "Recorded for Outbound processing"(with that single small black right arrow) in SXMB_MONI(around 1760 till now). Other than this few 100 messages for couple other interfaces are also in same status. There are other message interfaces using the same Idoc type; but they dont have this problem.
I have checked the queues: SMQ1/Q2. There are no errors. The other threads mention about some reports; but all are for error messages. So that also did not help!
On the first day someone had deleted the error queue entry. They had first checked the message in the queues but that was not showing any status. (This is very strange... but for some messages , the left most status column is not showing any status at all.. but while clicking on the end time column; I am getting the pop up which says succesfully processed). But this is not our problem right now.
Please help me process the messages in the "Recorded for Outbound processing" status.. some how!!!
Thanks in advance for your inputs....
P.N: Runtime workbench here is not configured properly. No CC monitoring tab; message monitoring shows only adapter messages etc.... So cannot check anything here

Thank you for your inputs.
@Udo.... SMQR- no issues.
The RFC destination is fine.
@Abhishek The Idoc has not reached SAP. The xml messages in XI are in "Recorded for outbound processing" which is kinda like Scheduled, i think. Anyway I checked the R/3 cant find the messages or errors.
Any help would be highly appreciated....

Error in connecting SAP R/3&Load Runner thr' recording for script creation

Hi SAP Gurus!!
I am New to SAP environment.
I got the following Error
" Scripting Interface is disabled on SAP Server"
No action can be recorded on this connection.
What I try to do is:
I tried to connect the SAP R/3 (4.77 EE- IDES environment) through Load Runner (8.1 evaluation version) through recording for creating a script.
What I did at load runner :
Start Creating Script by by pressing "start recording" by giving the following options
Program to Record : SAP logon
Working Directory :C:\Program Files\SAP\FrontEnd\SAPgui
Record into action : vuser_init
and in options : enable the Auto logon by providing the details of
SAP Server name,client,username,password and language.
By pressing OK button I got the above error and it was trying to connect the SAP.
If i give manually again logon details it is loging in to SAP but it is not recording any thing.
Can any body help in this regard?
Thanks in advance
Regards,
Vam C

Hi HP
Was wondering if you can help me, I am trying to create a trouble shooting sheet for possible reasons why sap scripting fails to connect at some of our clients. We write a screen reader that consumes the sapfewse.oxc, I have implemented this in C sharp and have great results. However I constantly getting support issues that my screen reader fails to connect.
Often the problem is fixed by just enabling Scriping on the client or using RZ11, I noted that you seem to indicate, however that RZ11 is short term solution and you mentioned a permanent change.
Can you please give details on the permanent change and how one can achieve this. Could you also list any other possible reasons why connecting to scripting might fail. I will be happy to mail you my connection code for a peer review as well, I would feel more comfortable with expert stamp of approval.
Thanks
Shaun,
Your help will be much appreciated,

Import multiple info records for 1 material item in repository

Hi Guys,
I have got sort of a puzzle I can not solve at the moment, maybe some one can help me to solve it. The situation in our system landscape is as follows:
Systems:
SRM 5.0 (Classic implementation scenario)
ECC 6.0
SRM-MDM 2.0
PI 2005
Material master is maintained in R/3 and the materials are replicated to SRM. From SRM we replicate all materials to the catalog repository in SRM-MDM.
As the material master in R/3 is vendor independent, the materials replicated to SRM also have no vendor attached. For the first initial material replication from SRM to the catalog SRM-MDM this also means that the products in the main table of the repository, u2018catalog positionsu2019, will not have a vendor or vendor number attached (i.e. no reference to a source of supply).
To assign a source of supply in the repository to a product (record) we will use info records which are replicated from R/3 to SRM-MDM. The mapping for this in the Import Manager can only be based on the product number. As this is the only unique value available which can map a info record to a already existing (but vendor less) ptoduct item in the catalog.
As long as every item in the repository has only one unique info record, meaning one source of supply with a specific price, there is no issue in the above scenario. Based on the product-id, the info record data will be matched with the material item in the catalog.
The issue for me arises when multiple info records exists for the same material. The info records can heave different vendors and different prices. All possible vendors should be available in the catalog for the same material (at least this is the requirement ).
At this point the product-id will no longer be an unique value. Importing the info records will cause problems, as only one material record is available in the repository for the specific product-id (remember that when doing a initial replication of the material master to the catalog, no vendor data is replicated).
Does anyone had this issue before, and knows a solution? Is it for example possible during the import of the info records in the Import manager, to duplicate material records in the destination data, based on the number of info records available in the source data for the same product-id. Or is there an other solution that I am missing?
Your help would be appreciated!
Regards,
Skander

Hi Shai & Ravi,
Thanks for your answers. The MDM version which we are using is 5.5 - currently on SP6
@ Shai: you are right; the standard SRM-MDM 2.0 catalog repository has a qualified lookup table u2018priceu2019, in which itu2019s possible to store the info record data. The standard fields in this sub-table are: Purchase Org, Amount, Currency Lower B, PIR-ID, price based quantity and Price based quantity UoM.
I added some extra fields (non qualified), to accompany the remaining info record data (product no. u2013 vendor id u2013 product category) which is exported/imported, via the standard extraction program in R/3: Tcode MECCM
I tried the solution Ravi proposed. This scenario works fine when, for example you want to maintain multiple info records for one specific material record in the main table (all info records related to the same source of supply, i.e. vendor). But as I described, the info records we import for one product can have different vendors.
The source of supply (vendor) in the shopping cart of SRM is determined via the u2018supplieru2019 field in the main repository table (which is in itself a flat lookup table ). What happens now is that all related info records are added to the u2018price informationu2019 field of the specific product record in the main table. Thus info records which have different suppliers are attached to a record in the main table which will have one specific supplier in the u2018supplieru2019 field. So from my point of view this will not work.
I am still stuck with the situation that the material master import will only import one record for every distinct product, which can have multiple info records. The info records can/will have different vendors. As the supplier field in the main table determines the source of supply in the shopping cartu2026. Iu2019am seeking for a solution which will duplicate the material records in the main table, based on the amount of imported info records for that specific material record, that have distinct vendors.
Shai, if you have some useful info on how you accomplished this requirement on a previous version of SRM-MDM, it would be greatly appreciated if you can share it..
Thx.
Skander

Using the same Asset Master Record for similar assets

Dear all,
I would like to ask if it is possible to use the same asset master record for multiple assets which are similar. The assets will be posted in different periods / fiscal years and therefore the depreciation would change and be charged according to the useful life of the individual assets posted to the same master record and which in turn will vary according to periods / fiscal year posted.
For example, an asset master record is created for Vehicles. The 1st vehicle with a useful life of 4 years is depreciated at the start of the year for 4 years. The second vehicle is purchased on 6 months after on the 1st June using the same asset master record. However the depreciation is not worked out over the same useful life of the previous vehicle but is extended for a further 6 periods. Is this possible and how is it done.
Many thanks for any feedback and help.
Thanks
PRG

Dear Peter
What is the issue in case you created separate Asset Master for each Vehcile ? Is there any specific need for you to accommodate all the assets in one single asset master ?
I don't think it is correct method as per Company's Act. Over and above, how would you plan for the Fixed Assets Register in the given situation ?
Regards
Gemini

CATA - No records for transfer to PS Issue

Similar Messages

Maybe you are looking for