CATA: Time sheet: Transfer to target componets
Could you please please give me an overview of what CATA (t-code) does?
I have done some config in sandbox:
I booked time in cat2 with a sender cost ctr + activity type and receiver cost center in ECC 6.0. With out running cata (t-code), I was able to see the actuals in cost center actual line item report and PS.
I did not understand what was the purpose of CATA ?
Thank you
Ravi
However, I am not sure but, I don't thinks so, because even I am workinng in ECC6.0, I don't belive that this kind of development sap will do in any near future EHP or version. Please let me know you are on which EPH in ECC6.0
Because than there is no point of approval Functionality or T code - CAT4. It is one of the most required functionality of Any type of Time sheet.
There is some thing wrong. Can you double check and try to replicate the same in More reliable environment Quality.
This is not at all std. SAP behavior. Doe some analysis in in CJi3 with whose id actual cost got posted etc.
With Regards
Nitin P.
Similar Messages
-
CATA: time sheet: transfer to target components
Could you please please give me an overview of what CATA (t-code) does?
I have done some config in sandbox:
I booked time in cat2 with a sender cost ctr + activity type and receiver cost center in ECC 6.0. With out running cata (t-code), I was able to see the actuals in cost center actual line item report and PS.
I did not understand what was the purpose of CATA ?
Thank you
RaviYou need to run cata if you want to pass the Entries to all the components which you implemented,
Else you can use CAT6 for HR exclusive ,
Let me know the requirement
Thansk
Shetty -
Dropdown Custom Field in CATS Time Sheet in ESS
I have added a custom field in CAT2 transaction with drop down values from the custom table. When I log on to ESS I was not able to see the dropdown in timesheet for that field. I am able to configure the field to have a search help dialog box.
Let me know how can I configure the field to show dropdown values in time sheet in ESS? Appreciate your replies.
Thank you,
Rohitcheck CL_XSS_CAT_VALUE_HELP*
or
use implicit enhancement of CL_Xss_cat_value_help_general for the purpose
build_f4_help Method in the class CL_XSS_CAT_RFC_COMMAND_TOOLS.
or note 914125 on how to get different helps
The table TCATS_SHLP_ITS also can be explored -
Work Flow for Cat Time sheet approval(more than one employee)
Hello Frn's,
SAP provided workflow for time sheet approval using CAT2 transaction . Currently it is sending mail only a single employee's manager(while Time admin is submiting the time sheet of more than one employee) .
But i need to send mail (work Item) to managers of all the employees .
Please suggest some way to achieve this requirment .
Thanks and Regards ..
Priyank DixitHello Cahndra,
I analyzed the task , it is passing only a single employee . Beacause of that it is sending mail for one employee's manager.
Thanks and Regards..
Priyank Dixit -
Hi Gurus,
My requirement is..system should n't trigger any mail when requester's request approved / rejected. Where can we determine this gap.
Please provide your valuable suggestions / solutions.
Thank you in Advance,
HasiniHi ,
There are many standard workflows in SAP HR and one of them is for CATS Approval or rejections and mail.to see the path of it go to T-Code SWDD and then underinformation Area u fing Workflow just have F4 and see all the availble workflow for it.
I am sure the mail must be triggering to SAP Inbox or the internal mail.
Please let me know if you require any further help. -
How to add customized column in the time sheet CATS (transaction CAT2) ?
Hello,
I need to be able to add some columns in the time sheet CAT2 containing:
- the name and first name of the person (in addition of the number), in display mode in the CATS time sheet.
- a text that I will found by reading some tables and values...
Does anyone have any idea how to do so ? and if it's possible or not?
Thanks a lot in advance for your help.
Best regards
Fanny GROUXHi,
Thanks a lot, it's really help...don't know why I didn't see this customized point before in SPRO.
But I have an other issue, my new fields is added in the CATS screen and now I'm trying to put default value by using the user exit of extension CATS0009.
When I complete the value of my new fields in structure CATSD_IMP, there are not taking into account and the CATS screen doesn't display the value.
Am I using the wrong table ? wrong user-exit ? or my code ..
Thansk a lot again for your help.
Fanny GROUX -
Query on CATS (Cross Application Time Sheets)
Hi,
Need help on below scenario,
I have charged time to an activity in a network. CAT5 has not been done. By mistake I delete the activity from the network for which I already charged time. After this when I went to my time sheet, against that particular activity number I am getting ****. I am not able to edit or delete the entry pertaining to ****.
Can anyone please advice what I should do to correct my time sheet.
Thanks & Regards
Sreekanth.P.SHi Minal,
<b>Ok after all this help file.</b>
now i can give you one example for CATS.
The following things are required to explain it.
1. Punch card machine
2. SQL Server.
3. SAP Server
4. RFC program.
Now if an employee punch his card it will going to store in SQL server .
Now RFC program is needed to fetch the data from SQL server to SAP server to It 2011 for the calculation.
Rptime.
From 2011 - B2 cluster .
B2 (ZL )cluster to Payroll.
This process is just an small example of CATS.
now after this interactive session .
Where it can be used :
<b>
CATS is another form of ESS
CATS Classic
CATS Regular
CATS Note Book
CATS instant
CATS phone</b>
<b>So explore more you can find more on this on google.</b>
Manoj Shakya.
<b>Reminder : Points should be given on answers.</b> -
In CATS, where can I assign "Activity type to default Time sheet",
Hi gurus,
In CATS, where can I assignt Activity type to Default time sheet. Please help me asap.
If any cats doc. available plz share with me.
Thanks in advance,
Sadana.If you have defined activity types then you can define them with the right price in KP27 for each costcenter.
the costcenter is connected with the personelnumber.. in infotype 315 you can define which is the default activitytype for each person.
if you have only 1 activitytype you can also programm the user exit to fill it in by default
see EXIT_SAPLCATS_002 to implement a fixed activitytype for whole cats
kind regards
arthur de smidt -
Report to Verify Pending Aproval of Time sheet on CATS
Hi Experts,
Earlier Manager has faced some problem in approving Time sheet because of some missing authorizations, we have fixed that now we have to verify if he has any time sheets still pending for his approval.
We use Cats Applicatiosn, all the employees has to fill the time sheet and it will be sent to managers appoval this is built on CATS application.
Is there any report i can run in SAP to find out how many employees time sheet is pending for particular manager approval.
Regards
HR UserHi Bhargavi...
One of the ways is to approve the time sheets viz MSS where in Manager will be able to see which all personnel time sheets are pending for approval. -
Cats Configuration for time sheet upload
Dear All,
I have time sheet file now i have to upload .Kindly guide me how i can do this thing with help of CATS.I am not aware of the cats how i have to maintain the profile and field selection CAC1,CAC2.
I want to know the steps for doing the same kindly tell me it's urg.
thanks
sandeepHi
Create a profile in CAC1 and setup the profile settings in CAC2.
What you select in CAC2 appears in CAT2 sheet.
The CATS config is self explanatory.
R K -
Cross Application Time Sheet (CATS) - Documentation for ECC 6.0
Hello everybody,
i'm searching for new documentation for customizing of Cross Application Time Sheet (CATS) for
SAP ECC 6.0.
I found on
http://help.sap.com/saphelp_nw04/helpdata/en/64/3fff9a470211d189720000e8322d00/frameset.htm
support SAP link.
I have also Cross Application Time Sheet (CATS) pdf documentation but for SAP R/3 4.6c release.
Can somebody suggest me where to find "how to" pdf documentation for ECC 6.0 release?
Thanks
JerryHi,
you can refer to books by SAP press... Configuration CATS
and can log on to Service.sap.com
Regards,
Kapil Kaushal -
PR workflow kick off again when CATA -Time transfer was done by Accounting
Hi,
PR workflow kick-off again when accounting ran tcode -CATA(Time transfer ).This PR was approved converted into PO .When account ran CATA the workflow kick off again .I deleted the workitem through tcode -SWWL still the PR shows Release Possilble.Any body has faced this kind of issue .I want to delete the Release possible option for this PR
This PR was created for service order for performimng services.
Thanks in advance
Nitin AmritkarI whould suggest you to call Apple
http://support.apple.com/kb/HE57
Here the Apple Support Communities is only used by normal users as you are. No Apple people to be found here. -
Transfer the data time sheet to CO
Hello
I transfer the datas time sheet to CO.
I want to use BW for the reporting but I don't see the datas, which extractor can use for extract these datas to BW...
Have you got an idea?
Thank you
JeremyHello
When I use the the extractor CATTS , I can see the datas.
But after the transfer the dats to CO, I don't see the datas in the cube
I don't see the details per personn in CO
Have you got an idea?
Thank you
Jeremy -
Cross Applicatin Time Sheet (CATS) Vs Time Manager's Workplace
Dear Guru,
I am not an expert in HCM Module.
I would like someone to kindly do me a favour in explaining the diffent between CATS and Time Manager's Workplace.
The main objective is to select the right tool for implementing Time Sheet User Interface for "Incentive Wage/Piece Work Payroll Scheme".
Please kindly give me some light.
Thanks in advance.
SurapongThe Cross-Application Time Sheet (CATS) is a cross-application tool for recording working times and tasks. It enables you to control all business processes concerning your employeesu2019 tasks u2013 from paying the employees, through monitoring the progress of a project, to creating invoices.
Its main strength is that it enables your employees to record their own data.The Time Sheet is a cross-application component in SAP R/3.
The Time Manageru2019s Workplace is a user interface incorporating the tasks involved in administrating employee time and labor and time evaluation messages. It was specifically designed to meet the needs of time administrators in decentralized departments.
The Time Manageru2019s Workplace enables time administrators to do their daily work quickly.
The Time Manageru2019s Workplace replaces the majority of functions of the Maintain Time Data (PA61) Time Management Pool (PT40), and Time Recording for Multiple Persons and Infotypes (RPTTMW00) transactions -
Find out the time sheet data entry fields
hi
this is satish,
i inserted the time sheet values in the time sheet data entry view. now the my problem is where these field values store in which tables.
thanks for allHi:
I need to transfer CATS data to FICO. I found out about transaction CAT7.
At the moment, I have 2 issues:
1) My CATSDB data have status "30". However, there is no corresponding entries in CATSCO. Could you tell me what I need to do to ensure that CATSCO has values?
2) My FICO system is running on 4.6C whereas my HR system is running on ECC6.0. Can CAT7 still works?
I appreciate your response.
Thanks,
Ash
Maybe you are looking for
-
Because of a lack of enough memory on my old Mac Book, I put all my music on an external hard drive. Now that I have a new Mac Book Pro with lots of memory, I want to move the music onto this new computer but I haven't been able to yet. I tried the
-
I need information regarding the creation of Workbook and WAD.
Hi, I need information regarding the How to create the Workbook and WAD. Can any one help me to get the information.. Regards, Suman Edited by: Suman Reddy Vuyyuru on May 19, 2009 8:22 AM
-
Isync error when sinc with Nokia E71
Mac OS X 10.6.2 When I sinc my nokia E71 with iSync, Isync Crash with this message: Process: iSync [858] Path: /Applications/iSync.app/Contents/MacOS/iSync Identifier: com.apple.isync Version: 3.1.0 (585.0) Build Info: iSyncUI2-5850000~8 Code Type: X
-
Hello, Since Friday i have an new MacPro and until an hour ago everything was fine. But after restarting my mac colornavigator continuously crashes when i try to open it. I paste the protocol of the crash, but to be honest i can't really "read" this.
-
We are developing the current version for better. These are what we have done.... 1)Check out the latest code from subversion. 2) Now, using Jdeveloper, open up an existing application 3) point it to the *.jws JavaWebStart file that should pull in a