Catalog ID / vendor incorrect

Hi all,
I'm in SRM 5.0 in classic scenario, and are using some external suppliers catalogues via OCI.
Occasionally a shopping cart is created that has the wrong catalog ID. It appears as though the user has managed to open two catalog windows at the same time, or SRM has lost track of which catalog session is current.
eg. And item is ordered from Catalog1, but in SRM, the catalogue ID stored against that item is Catalog2.
Any suggestions?
Thanks,
Darren.

Hi,
Opening two webservices within the same SRM session is not supported by SAP, it will, as you have identified, only use the webservice ID of the first catalog. Only 1 cataog window at any one time should be opened, this is how the system is designed.
Regards,
Jason

Similar Messages

  • Reserved fields in the catalog record have incorrect data???

    I inserted the orginal installation disk for the Mac mini. I ran the verify disk. Then nine of these messages in red showed - "Reserved fields in the catalog record have incorrect data." I then did repair disk and now it shows that 1 volume could not be repaired. I have the MiniStack as well. I am assuming that the Hard Drive is the one needing repair. Not the MiniStack which also has OS installed along with Classic. How can I fix the disk? How important is the message in red?

    You have directory damage.
    Use Disk Warrior to repair the drive: http://www.alsoft.com
    Explanation of what directory damage is and what causes it: http://alsoft.com/DiskWarrior/details4.html
    The other option is to wipe your drive and re-install everything.

  • FYI DU error:"Reserved fields in the catalog record have incorrect data"

    I had a very perplexing problem...
    My iMac G5 was shutting down by itself so I took it to Apple and had the power supply replaced. After it was repaired I was concerned about the hard drive health after the unexpected shutdowns. So I ran Disk Utility and encountered the following...
    The iMac G5 is running OS 10.4.6.
    I ran "Repair Disk Permissions" from Disk Utility and encountered no errors.
    I ran "Verify Disk" from Disk Utility on the drive and I get these results (copied from DiskUtility.log):
    Verifying volume “TheDisk”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Reserved fields in the catalog record have incorrect data
    Checking volume bitmap.
    Checking volume information.
    The volume TheDisk needs to be repaired.
    Error: The underlying task reported failure on exit
    Disk Utility stopped verifying “TheDisk” because the following error was encountered:
    The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    This occurs whether I run it while booted from the hard drive or the restore disc. While booted from the restore disc, running repair disc indicates that the failure could not be fixed.
    Booted from the hardware test disc and all tests passed.
    Booted from TechTool Pro disc and all the tests passed.
    Booted from Disk Warrior (had to get the "free" update to boot my iMac G5) and rebuilt directory. No errors reported.
    Still same error reported in Disk Utility. ???
    Booted iMac in 'safe' mode. Rebooted iMac normally.
    Disk Utility now reports success!

    Sorry but this is not assistance to you but an additional request for help from someone!!!
    I had the same thing occur just now!!!! I have used everything in site and keeps returning............
    Hope someone has an answer as to why this occured....

  • OCI Catalog for Vendor problem : Logical system for catalog not maintained

    We have set up an OCI catalog with on of our vendors. This works fine untill we transfer shopping basket data from Vendor sysem into our SRM-system (SRM5.0). Then data is not being transfered and Vendor Webshop screen remains 'open'.
    in SLG1 i have found an error "Logical system for catalog not maintained. Inform system administrator'
    Anyone an idea what the cause of this error can be or what we need to check ?
    Thanks in advance

    Hi,
    I have not seen that error before. However, I think it may have to do with the LOGICAL_SYSTEM OCI field. Can you check if your punch-out catalog vendor is populating that field? Also, check if you have the correct BP# populated in the catalog configuration and the LOGICAL SYSTEM Field on the define External Webservices is blank.
    SG

  • Catalog(Punchout) Vendor

    Hi,
    We have a Punchout Vendor, where the shopping cart is eligible for free shipping if it is 10$, less than 10$, no free shipping, Our requirement is if the user submits a shopping cart less than 10$, it should not submit and instead it should show up a message saying that the Order did not meet the minimum requirements for free shipping.
    Please advice what is the best way we can achieve this requirement.
    Regards

    Hi. Dinesh is correct, but to make it vendor specific you could define a custom attribute in table T77OMATTR called "minumum spend".
    Then in PPOMA_BBP (before SRM 5) or in PPOMV_BBP (SRM 5) you can find the org unit for the vendor and assign the minimum spend value.
    Then you can use function BBP_READ_ATTRIBUTES in the BBP_DOC_CHECK_BADI to read the minimum spend for that vendor and issue an error accordingly.
    Regards,
    Dave.

  • Catalog vendor having different vendor number in different R/3 system

    Hello Experts,
    We are in SRM 7.0 classic scenario and we are facing an issue as described below:-
    We are using a punched out catalog which has different venor number in different backend system.We have 2 R/3 backend system say R/3 sys1 & R/3 sys2.
    Vendor No for the Catalog vendor is say:-
    Vendor No     R/3 sys
    V123              R/3 sys1
    V567              R/3 sys2
    We have connected the R/3 sys2 just a week back.We have replicated the catalog vendor number V567 from R/3 sys2 into SRM system and we are able to successfully create a Shopping cart in R/3 sys2 using catalog.
    However,we are facing a problem and the problem is that,
    When we create a shopping cart in R/3 sys2 using catalog,by  default we get a message that "Vendor V123 is not intended for plant"
    We are able to change the vendor from V123 to V567  in the portal,but we are unable to understand why the vendor V123 is picked up as a default catalog vendor.
    Can you all experts,plz help us understand why this vendor V123 is picked up as default vendor and how we can ensure that Vendor V123 is picked up when we are creating SHC is system R/3 sys1 & vendor V567 is picked up as default vendor when we are creating SHC in system R/3 sys2?
    Any pointers will be highly appreciated.
    Thanks & Regards,
    RKS

    Hello RKS,
    >
    RKS_Jsr wrote:
    > (...)
    > Can you all experts,plz help us understand why this vendor V123 is picked up as default vendor and how we can ensure that Vendor V123 is picked up when we are creating SHC is system R/3 sys1 & vendor V567 is picked up as default vendor when we are creating SHC in system R/3 sys2?
    >(...)
    This means for same Product Category (and same material ID) coming from your Punch-Out catalog, you can create a Purchase Requisition in R/3 sys1 OR R/3 sys2 ?
    If i am correct, how can you manage in your catalog two vendor numbers for same Product Category (and material ID) ?
    I guess only one vendor number (V123) is maintained in your catalog. That's why, even if your management rule is to send your SC to R/3 sys2, you will have always vendor V123 as the default one, as it is the only one in your catalog...
    Regards.
    Laurent.

  • Vendor Missing on SC when Purchasing from Internal & External Catalog

    Hi All -
    I have a strange problem and I am wondering if anyone else has run into this and how they solved it.  We are implementing SRM 5.0 on SRM Server 5.5 with SRM-MDM.  We are using both internal catalogs as well as punch out catalogs. 
    If we select items from an internal catalog and put it in our shopping cart and then select items from a punch out catalog into the same shopping cart, the vendor for the punch out catalog is not returned.  This only happens when you purchase from the internal catalog first.  If you purchase form the punch out catalog and then add items from an internal catalog, the vendor is displayed for every item. 
    Has anyone seen anything like this?  How do I resolve it?  Thanks
    Jane

    Hi Jane
    Hope you aware that there is no relationship between internal catalog as well as punchout catalog?
    Internal catalog- retrieve data from SRM-MDM catalogs
    Punchout catalg -retrieve data from external marketplace catalog.
    Did you debug ?
    Hope you might have mapped with BBP_CATALOG_TRANSFER badi to map the catalog to OCI maping.
    Debug and check you might have some clues.
    regards
    Muthu

  • Catalog Problem - Automatic vendor assignment problem...

    Hello All
    One of the procurement catalog (Green flow Items) was corrupted by uploading a supplier catalog Schema. We got this corrected by once again uploading the correct schema to this catalog and mapping it to the master catalog. There after the corrupted schema is published.
    After this when the users are creating the shopping carts with the items in this recovered catalog, 'Automatic Vendor Assignment' facility is not working . All these shopping carts are being directed to the Professional Purchaser, even though they are Green route shopping cart
    Due to the 'Automatic Vendor Assignment' failure; if the requisitioner manual enters then Vendors details when creating the Cart then the Vendor Details will appear in the Professional Purchasers In-Box.
    Alternatively; the Vendor Details will not appear.
    Did I miss any thing while correcting the the Procurement cataloge.
    Any help or guidance on this is very much appreciated.
    Thank you in advance.
    Wishes & Regards,
    Mahesh. J

    Hi,
    Please check returned OCI value from Catalog. Did you get correct business partner ?
    [https://service.sap.com/sap/support/notes/395312|https://service.sap.com/sap/support/notes/395312]
    Implement the Note 487917 and check the log in SLG1 transaction.
    Regards,
    Masa

  • Incorrect vendor number is appearing during invoice entry

    MIRO is been made with the reference to the Delivery note.Even though after selecting the correct vendor, incorrect vendor is getting pickedup by the system.
    Note:
    1.No partner functions has been maintained.
    2.Frieght vendor is not been maintained.
    Please send me the reply ASAP.

    Hi,
    Check the company code your are using , means press F7 or switch company code,
    whether are you using the concerned company code for that vendor  or some other company code.
    As you are referencing the Delivery note number , may be this note  number is used in the Other company code also,
    Check and confirm.
    rgds
    Chidanand

  • Vendor name is deleted after the approver changes the product category.

    Hello,
    We have implemented workflow WS14000044(Completion by Purchaser) and
    WS14500015(Item-Based Main WF).
    At workflow WS14500015 level, when the approver changes the product
    category, the vendor name is deleted.The previous validation allows the
    PO creation , But the PO is created without vendor.
    Furthermore under transaction process purchase orders 'BBP_POC' the
    purchaser can not access in change mode to the vendor field in order to
    add a vendor.
    How can we give access in change mode to the vendor field for purchaser in transaction 'BBP_POC' ?
    Regards,
    Lina

    Hi,
    Which SRM version are you working on?
    Please see if the foll notes help:
    <b>801591 Source determination after item change</b>
    881346 Vendor incorrectly deleted
    873972 Sources of supply in the shopping cart with catalog items
    908178 Transferring reference: Deleted vendor
    Note 829652 - Completion workflow in shopping cart: Vendor
    789087 Changed product category: Vendor not deleted
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Multiple info records for the same material record in the catalog

    Hi Guys,
    I have got sort of a puzzle I can not solve at the moment, maybe some one can help me to solve it. The situation in our system landscape  is as follows:
    Systems:
    SRM 5.0 (Classic implementation scenario)
    ECC 6.0
    SRM-MDM 2.0
    PI 2005
    Material master is maintained in R/3 and the materials are replicated to SRM. From SRM we replicate all materials to the catalog repository in  SRM-MDM.
    As the material master in R/3 is vendor independent, the materials replicated to SRM also have no vendor attached. For the first initial material replication from SRM to the catalog SRM-MDM this also means that the products in the main table of the repository, u2018catalog positionsu2019, will not have a vendor or vendor number attached (i.e. no reference to a source of supply).
    To assign a source of supply in the repository to a product (record) we will use info records which are replicated from R/3 to SRM-MDM.  The mapping for this in the Import Manager can only be based on the product number. As this is the only unique value available which can map a info record to a already existing (but vendor less) ptoduct item in the catalog.
    As long as every item in the repository has only one unique info record, meaning one source of supply with a specific price, there is no issue in the above scenario. Based on the product-id, the info record data will be matched with the material item in the catalog.
    The issue for me arises when multiple info records exists for the same material. The info records can heave different vendors and different prices. All possible vendors should be available in the catalog for the same material (at least this is the requirement ). 
    At this point the product-id will no longer be an unique value. Importing the info records will cause problems, as only one material record is available in the repository for the specific product-id (remember that when doing a initial replication of the material master to the catalog, no vendor data is replicated).
    Does anyone had this issue before, and knows a solution? Is it for example possible during the import of the info records in the Import manager, to duplicate material records in the destination data, based on the number of info records available in the source data for the same product-id. Or is there an other solution that I am missing?
    Your help would be appreciated!
    Regards,
    Skander

    Dear Poster
    Your thread has had no response since it's creation over
    2 weeks ago, therefore, I recommend that you either:
    - Rephrase the question.
    - Provide additional Information to prompt a response.
    - Close the thread if the answer is already known.
    Thank you for your compliance in this regard.
    Jason Boggans
    SAP SRM SDN Moderator

  • SC - Contract and vendor information disappear afeter change plant

    Dear friends,
        I'm using SRM 5.5 and i have the follow problem:
        I create a SC using a item registered in MDM 2.0 the item has contract information and vendor information, but there is not information about plant.
        The SC get the contract and vendor information but i need sometimes change the plant and when a change the plant the information about catalog and vendor disappear.
        I tried use the BADI BBP_SOS_BADI to recover contract and vendor information, but in this moment i don't have how to get contract information because the catalog information disappear.
        I'm using the classic scenario so i don't create contract in SRM just in backend System.
    Thanks.
    Roberto Aran.

    Hi
    Could see the plant data in the SC( Ship to address/ Performance location)
    BR
    Muthu

  • How does a catalogue vendor gets charactarized as a fixed vendor in SRM?

    Dear Expters,
    can you please help me understand the standard SRM behaviour (7.0, CS) for the following point:
    When a catlogue item is purchased from a third party catalogue platfrom, than the vendor of this catalogue item is displayed as a fixed vendor in the EBP shopping cart, afer the return from the catalogue platform from SRM.
    How exactly does the charactarization of the vendor as fixed vendor happens?
    I mean, does it happen in a way that during the return from the catalogue platform to SRM, the catalogue platform sends the
    content 000019 into the SRM field partner_fct?
    Or is the approach completely different and it is done somehow in a way that SRM receives that data from the catalogue platform, than for example understands somehow that this position was sent from a catalogue and based on that decides that the vendor should have the "fixed vendor" partner function?
    Thank you.

    Hello,
    The SRM system behaves as described below:                                                                               
    Limit item:                                                               
    If a SC is created with a vendor, it is considered as a "Fixed Vendor".                                                                               
    Free text item:                                                           
    If a SC is created with vendor, it is considered as a "Preferred Vendor".                                                                               
    Catalog items:                                                            
    When an item is added from a catalog to SC, the vendor is always considered as "Fixed vendor".                                                                               
    It is possible to change the "Preferred Vendor" to "Fixed Vendor" through BADI implementation BBP_DOC_CHANGE_BADI~BBP_SC_CHANGE.
    Anyway, if you create a cart using catalog item, vendor will always be considered as fixed.
    Regards,
    Ricardo

  • Error - Incomplete items in catalog. Only complete items were transferred

    Hello Friends,
            Iam working on a requirement which maps Vendor UOM(Unit Of Measurememnt) to SAP UOM.
    For this i created custom table which contains Catalog id, Vendor UOM(non sap system), SAP UOM.
    Here iam getting following error while mapping TU(Vendor UOM) to TB (SAP UOM) in shopping cart portal.
    Incomplete items in catalog. Only complete items were transferred
    But while mapping EA (Vendor UOM) to PK (SAP UOM), it is working fine. Could any one throw some light on this why iam getting the above error.
    Thanks
    Srikanth

    Hi,
    Please refer the below thread for the same issue.
    Re: Incomplete items in catalog. Only complete items were transferred .
    Hi,
    Looks there is a improper matching with UOM maintained in the catelogue . Go to trxn CUNI and check the unit of measurement , you should be maintain the same UOM for bottle in the catelogue too ( Should be BO for Bottle). So change the UOM in the catelogue should be resolved.
    Hope this helps.
    Best Regards,
    NMK

  • Catalogs in MM

    Folks,
    We're on ECC 6.0 and it should be possible to use vendor catalogs. Anyone experience on this? I can't find any documentation on this topic.
    Thanks for helping.
    MZ

    Hi,
    Note 1092922 - Using several catalogs in purchasing describes the following:
    Description of functions
    As of ECC 6.0, you can use Web-based catalogs in purchasing (using an OCI interface). You can now transfer catalog data to the material items of purchasing documents (purchase requisitions and purchase orders).
    In Customizing for purchasing, you can specify several catalogs. In the transactions for purchase orders and purchase requisitions, only the catalog is used for which the default indicator is set.
    If you want to use more catalogs for vendors or for different article classes, their usage is restricted.
    Furthermore there is a catalog button available in ME21N, which now obviously does not trigger anything.
    MZ

Maybe you are looking for