Catch event in WDA and process in SAPGUI

Hi all,
class CL_GUI_WDR_VIEWER provides the ability to embed a web dynpro ABAP application in a SAPGUI screen custom control. Using class CL_WDR_SAPGUI_INTEGRATION2 can be used to fire an event in the web dynpro logic that is processed by the SAPGUI screen PAI logic.
On our SAP discovery server, an example report DEMO_GUI_WDR_VIEWER1 has been delivered, this works fine.
Now I've copied the report and the embedded web dynpro application to our CRM system, however, for whatever reason it doesn't work there.
Basis release of discovery server: SAP_BASIS 700 Patch 0014
Basis release of CRM server: SAP_BASIS 701 Patch 0003
The following notes have been considered/implemented: 993464, 1409234, 1409237.
Any ideas?
Thanks & regards
Wolfgang

>Now I've copied the report and the embedded web dynpro application to our CRM system, however, for whatever reason it doesn't work there.
It likely doesn't work for the same reason that the demo application wasn't there in the first place. SAP no longer supports this SAPGUI integration approach and has removed the demo applications in later release and support package levels.

Similar Messages

Reading busines object event in WDA

I have a alv table , and its the list of quotations . On document no click (whcih is a link) , I am calling CL_WD_RUNTIME_SERVICES=>ATTACH_FILE_TO_RESPONSE to call sap shortcut. Now i have a question here as well
The VA22 screen opens up in a very small display , how do I default this to maximum size ?
Once the user changes a quotation , this should generate a BOR event namely BUS2031( CHANGED ). I believe we can link change document events to BOR events in SWEC transaction.
Now is there any way to read the change event in WDA and refresh the ALV accordlingly.
Also is there any other way to refresh ALV as soon as the document is changed.
Thanks
Awaiting your response.

i know I can timed trigger a refresh say every 30 seconds , but this will happen even if the user is doing some processing ,
(for eg entering values on a popup in a different window.)

Process chain Error: This AND process is not waiting for event RSPROCESS

Hi All,
I am facing an error in the process chain in PRD.
Error message: This AND process is not waiting for event RSPROCESS.
We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
Thanks in advance,
Sai Chand.S

Hi,
If you did any transports related to that metachain we face similar kind of issues.
not only the AND process , we need to remove all the process before executing the AND process and create it again.
It helps you, you said your in production So you should take the proper approvals and do it.
Regards,
Yerrabelli.

Service and operation options are not visible in catch event.

I have created a file adapter service and calling the same using throw and catch event.I have created service call type conversation which is configured in throw event with default conversation option.But when i am trying to config same in catch event my service name and operation does come up.
Any idea ?
http://postimg.org/image/orb03h29x/

Hi Madhu,
My Understanding:
1. When you enter the main/header product in the item details, the item catefory for the header product gets determined.
2. Your components can also be seen below as sub-items automatically, but the item category is not determined.
Tell me if my understanding is correct.
If Yes, u need to maintain the item category determination for the sub-items or components as well.
Transaction Type: Put the service order transaction type
Item Category Group: Check the item category group of your component product in COMMPR01 (Material tab/ Sales and Distribution Tab)
Item Category Usage: Leave it Blank
Main Item Category: Put the header product item category
Item category: Put the desired item category here.
Also ensure that in the customizing of the header item category, u have maintained the Structure Scope as A- Single Level Explosion of Structured Products.
Regards,
Shalini Chauhan

Event and Process Types - Urgent

Hi All,
I am little confused between Events and Process Types in a PC. How an event can be used in a PC ?
I know that SM62- To create event, SM64 Execute Event. But how its used in PC.
Thanks in adv for your reply.

Events can be used to start the process chain based on the event raise. In order to use the events
1. Create an event using SM62
2. Go to your process chain start variant and select the start type as After event and give the event name which you created and then activate and schedule the process chain
3.Now go back to sm64 and trigger the event that should actually start the Process chain. This can be monitored using the Process chain log.
Regards,
Jagadeesh.

Process on Help request and Process on value request events examples

HI All,
Can anybody please give me some examples of Process on Help request and Process on value request events.
Thanks in advance

HI,
Check programs
<b>demo_selection_screen_f1</b>.
<b>demo_selection_screen_f4.</b>
Regards,
Sesh

Subtype event not triggering and supertype event triggers twice!!!!!!

Hi,
We have created a subtype for object bus2030 and also an event created for that. My workflow should trigger whenever an inquiry is created.
I've maintained this as triggering event in SWDD and done type linkage is SWE2 and everything looks fine.
When i simulate or create event the WF is triggered but when create inquiry in VA11 WF does not triggers.
I've checked SWEL for event trace but no event is triggered at all... Am i missing something... I've done almost everything that i used to do...
Even synchronized buffer!!! nothing paid me a solution...
Infact the same was working with 3.1i system but after migration to ECC6 we had to create new WF template for the same Process.
Now I also see that the supertype bus2030-created event is triggered twice but, obviously no receiver type exists. But the zbus2030 event is not being triggered at all!!!!
Kindly help me understanding my mistake...
Regards,
PB

Hope you have already set the deletegation in SWO6.
Now, event dont get triggered automatically, jus because they are defined in object. They have to be explicitly published in thesystem.
Check for a suitable user exit in your transaction, which makes use of function module to create the event, from that you know how to proceed.
If you dont find user exit, try other triggering techniques such as change documents, logistics, BTEs... etc.
regards,
Sandeep Josyula

'AND' process in a process chain failure - need help

For the first time and out of no where, two separate 'AND' processes in two separate process chains failed on two separate days. It displayed error the same messages in both isntances as below. It seems that when the first load completed and the second was still in progress, this 'AND' attempted excecute and failed.
I had to manually resume the chain by setting the 'AND' status'to 'G' in RSPCPROCESSLOG table. I also plan to recreate those 'AND'.
But did anyone here experience this problem and know the root cause?
Thanks for any assistance!
Julian
This AND process is not waiting for event RSPROCESS, parameter
Job cancelled after system exception ERROR_MESSAGE

Thanks, Shambhu!
I am planning to create new ones. But my problem is that I hate to recreate all 'AND's I have in all our chains. There are a lot of them. But if I don't, I have no idea which is the next victim ...
Julian

Process chain AND process

Hi,
I have a process chain that has two parallel processes of loading DSO and Infocube data. There are two infopackages on one side and two on the other side. The two processes are connected with and AND process at the end and after that there is a datastore activation process.
When I executed the process chain, the infopackages on both sides started loading data. The two infopackages on the left side finished first while the second infopackage on the right side had not finished yet when the AND process errored. I get the following message:
This AND process is not waiting for event RSPROCESS , parameter
47VKUORHMXQKR2AN73AVAR0C9
After the AND process I have a Datastore generation process and I want it to continue only when all infopackages have been loaded.
Why does the process stop at AND even though all infopackages have not finished yet?
thanks
Michalis

There was no error message in ST22 or SM37. There was very little info to go on. I just deleted the requests and run the process chain again and there's no error. However the process chain does fail at a later step.
Update Datastore Object Data (Further update)
I don't know what that further update is for. It was automatically selected in my Process chain when I selected the infopackage for the DSO.
There's a MESSAGE_TYPE_X error.
Information on where terminated
    Termination occurred in the ABAP program "SAPLRSM2" - in "RSSM_MON_WRITE_3".
    The main program was "RSBATCH1 ".
    In the source code you have the termination point in line 2659
    of the (Include) program "LRSM2U16".
    The program "SAPLRSM2" was started as a background job.
    Job Name....... "BI_PROCESS_ODSPROCESS"
    Job Initiator.. "CSPAPADM"
    Job Number..... 14103000
Source Code Extract
Line SourceCde
2629       CALL FUNCTION 'RSSM_GET_TIME'
2630         EXPORTING
2631           i_datum_utc = rsreqdone-tdatum
2632           i_uzeit_utc = rsreqdone-tuzeit
2633         IMPORTING
2634           e_timestamps = l_s_status-t_timestamp.
2635       IF rsreqdone-tstatus(3) = icon_green_light(3) OR
2636          rsreqdone-tstatus(3) = icon_red_light(3).
2637         CALL FUNCTION 'RSSM_GET_TIME'
2638           IMPORTING
2639             e_timestamps = l_s_status-ts_proc_ended.
2640         l_not_yellow = 'X'.
2641       ENDIF.
2642       IF l_not_yellow = 'X'.
2643         CALL FUNCTION 'RSSTATMAN_SET_STATUS'
2644           EXPORTING
2645             i_s_status    = l_s_status
2646             i_with_commit = 'X'.
2647         IF l_s_status-t_status(3) = icon_green_light(3) AND
2648            l_s_status-dta_type   = 'ODSO' AND
2649            t_data-aufrufer <= '70'.
2650           CALL FUNCTION 'RSS2_CALLBACK_ODSADM_ODS_SUCC'
2651             EXPORTING
2652               i_ods = l_s_status-dta(30)
2653               i_rnr = l_s_status-rnr.
2654         ENDIF.
2655       ENDIF.
2656     ENDLOOP.
2657     IF sy-subrc <> 0.
2658       IF t_data-aufrufer <> '09'.
2660       ENDIF.
2661     ELSE.
2662       IF l_not_yellow = 'X'.
2663         CALL FUNCTION 'RSB1_OSNAME_TO_ICNAME'
2664           EXPORTING
2665             i_osource        = g_s_minfo-oltpsource
2666 *           I_OSTYPE         = RSAOT_C_OSTYPE-TRAN
2667           IMPORTING
2668             e_icname         = l_icname
2669           EXCEPTIONS
2670             name_error       = 1
2671             OTHERS           = 2.
2672         IF sy-subrc = 0.
2673           CALL FUNCTION 'RSAWB_MAINTAIN_DTA'
2674             EXPORTING
2675               i_method                   = rsatr_c_dta_get
2676 *             I_TYPE                     =
2677               i_objvers                  = rs_c_objvers-active
2678               i_dta                      = l_icname
Any idea what that means? Also do I need that further update step in my process chain?

Process Chain hangs on AND process

Help Super gurus!
I've tried several versions of a chain that loads multiple InfoPackages serially then multiple DTP in parallel using filtering from the PSA to a DSO. All load successfully. Then I have the DTPs all meet at an 'AND' process before processing should continue to a cube.
The 'AND' process also shows green but it does not continue to the next process step. It just stops there, no more jobs running, no yellow, nothing. It thinks it's all done, everything after that is still blue.
Why does it hang there and what can I do to get it to continue?
Thanks,
Al
Points available.

Hi,
Not sure what is the root cause in your case.
Try this. It may work. Normally this is done after a step turns red and no repeat is available.
Method 1 (when it fails in a step/request)
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
How is it possible to restart a process chain at a failed step/request?
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Thanks,
JituK

Triggering Process chain based on execution of R3 job and Process Chain

Hi All,
I need your help in arriving at a solution for a reqirement.
Scenario is., I need to trigger a process chain B based on successful execution of Process chain A and an R3 job. If both conditions(Completion of R3 job and Process Chain A) are met then only it has to trigger process Chain B.
I know that we can use events to trigger a process chain using R3 job.But my case is differenet I need to consider the success message from both process chain and R3 job.Is there any way to solve it ?
Please provide me with your valuable inputs.
Thanks,
Bindu

Hi Hima,
You can use the 'AND' variant for both, If both are success then trigger the process chain.
Regards,
Ravi Kanth
Edited by: Ravi kanth on Apr 30, 2009 3:36 PM

Ask the Expert: Overview of Cisco Prime Service Catalog and Process Orchestrator Solutions

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco Prime Service Catalog and Process Orchestrator solutions.
Cisco expert Jason Davis will discuss Cisco’s network management products offered under the Cisco Prime framework. If you have questions about Cisco Prime infrastructure or data center automation with our Cisco Prime Service Catalog and Process Orchestrator solutions, join us on the Cisco Support Community.
Jason Davis is a distinguished services engineer in the Intelligent Infrastructure Practice team of Cisco Advanced Services. His role is to provide strategic and tactical consulting for hundreds of Advanced Services customers, lead service innovation, and assess new services and technologies. Jason's primary expertise areas are in network management systems, intelligent automation, virtualization, data center operations, software-defined networking, and network programmability.
Based out of the Research Triangle Park (RTP) campus, Jason is also responsible for administering the Research Triangle Park Network Management Lab, Cisco's largest network management lab.
Since joining Cisco in 1998, Jason has been a frequent speaker at Cisco's Networkers and CiscoLive conferences in the United States and Europe. In the past five years he has also been involved in the conference network setup and monitoring. He is a much sought-after resource by the field sales teams to assist with presales solutions and executive briefings. He has provided strategic and tactical network management consulting for several hundred customers.
Jason is a subject matter expert with the following products and features:
Cisco Prime LAN management solution
Cisco Prime infrastructure
CiscoSecure ACS
Cisco Prime Network Registrar
Cisco Process Orchestrator
Cisco Prime Service Catalog
Cisco IP SLA
Embedded Event Manager
SNMPv3
onePK and OpenFlow
Cisco UCS
Device instrumentation
VMware ESX, ESXi, and vCenter
ITIL
Jason received his bachelor of science degree in electrical engineering from the University of Miami (FL). He has been married for 20 years and has 4 children. His interests include providing audiovisual technical support for churches and conference venues, camping and biking with his family, remote-control helicopter piloting, paintball, and recreational shooting.
Remember to use the rating system to let Jason know if you have received an adequate response.
Because of the volume expected during this event, Jason might not be able to answer every question. Remember that you can continue the conversation in Data Center > Intelligent Automation under the subcommunity Cisco Prime Service Catalog shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Jason,
Thank you very much for welcoming me to your expert discussion :) I feel to be in the right place, at the right time. Thank you also for answering question beyond your scope here, much appreciated. The information received will help me to go further as such I have submitted a 5 start rating for your first reply.
That sounds promising about the LMS part so yes, I stay tuned and wait patiently.
Ok, now let’s revert to the actual topic discussed here. Cisco Prime Service Catalog and Process Orchestrator solutions I have briefly read up on this on CCO (where elseJ) and picked out the following quote
---- Quote from the Cisco Prime Service Catalog Data Sheet
Today’s end users want self-service and easy access to IT tools and services.
Simultaneously, organizations are seeking ways to extend their cloud management
platforms beyond self-service delivery of virtual machines and infrastructure resources
while increasing their use of cloud-based solutions to enhance business agility and effectiveness.
Cisco Prime™ Service Catalog offers tremendous benefits to organizations that want to unify the ways in
which all types of IT services are ordered and fulfilled, not just infrastructure requests
---- un quote ---
I try to understand what (at high level of course) happens in the back ground when an order is raised and which vendor solution your product can interact with.
As mentioned in the quoted text, this service catalogue goes beyond the standard infrastructure.
Let’s say, a user wants to deploy a new email services, or in your example, extends or create a new web-portal (i.e. for HR to view and manage holiday, staff absence and benefits).
Your solution will need to interact somehow with the 3rd party vendor application that is capable building such portal I believe.
Without disclosing to many information, I assume the portal is linked to backend VM,s that spin up requested resources (and more magic of course). Perhaps I am mixing this up with another cisco product where a user can go on the portal and spin up virtual Firewalls, virtual Routers can be provisioned in now time.
Out if interest; Is this product also known as Mozart? (project code within Cisco?)
I hope query is ok.
Best wishes
Markus

Event IDs 136 and 137 0x80000000000000 in System Log on Windows 2008 R2 Server, Exchange 2010 in Cluster

Hi,
I'm having an issue with one of my exchange 2010 Servers. We had a power outage and upon recovery, I cannot start Services Net.Pipe Listener Adapter and Net.Tcp Listener Adapter (And thus cannot Start IIS and provide Exchange Client Services.) This is a
physical server (Not VMWare or Hyper-V)
The System event log has lots of Event 136's and 137s on Ntfs with the keyword - 0x80000000000000 - The General Messages are: The default transaction resource manager on volume C: encountered an error while starting and its metadata was
reset. The data contains the error code.
and
The default transaction resource manager on volume OS encountered a non-retryable error and could not start. The data contains the error code.
XML Output as follows:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="32772">136</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-17T18:10:37.788942300Z" />
<EventRecordID>315532</EventRecordID>
<Channel>System</Channel>
<Computer>server.domain.com</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>C:</Data>
<Binary>1C00040002003000020000008800048000000000060019C000000000000000000000000000000000060019C0</Binary>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="49156">137</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-17T18:10:37.788942300Z" />
<EventRecordID>315531</EventRecordID>
<Channel>System</Channel>
<Computer>server.domain.com</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>OS</Data>
<Binary>1C0004000200300002000000890004C000000000020100C000000000000000000000000000000000020100C0</Binary>
</EventData>
</Event>
When I attempt to start the services - I get the following errors:
The Net.Pipe Listener Adapter service depends on the Windows Process Activation Service service which failed to start because of the following error:
Transaction support within the specified resource manager is not started or was shut down due to an error.
The Net.Pipe Listener Adapter service depends on the Windows Process Activation Service service which failed to start because of the following error:
Transaction support within the specified resource manager is not started or was shut down due to an error.
I have tried the "fsutil resource setautoreset true" fix without success.
Any ideas or direction would be much appreciated. Restoring this server will be extremely difficult.
Thanks!

We can close this question.
From an elevated prompt, I ran 'fsutil resource setautoreset true' and attempted to remove the files with .blf and regtrans-ms file extensions from C:\Windows\System32\config\TxR. but these files were locked by system processes. (They are also
tagged with the hidden file attrib so you may not see them at first)
So, I booted the system with a Windows 2008 R2 Install Disk, selected repair OS and selected the command prompt. I then performed a chkdsk /f c: and selected "Y" to unmount the drive. It made some repairs.
With the system booted from the install disk, and chkdsk executed, the locks were freed and I was able to delete the files from C:\Windows\System32\config\TxR.
Once the system rebooted, the services came back fine and everything was back to normal.

Windows Storage Server 2008 R2 Essentials SP1 64 bit Event 55 NTFS and shadowcopy failure

Windows Storage Server 2008 R2 Essentials SP1 64 bit Event 55 NTFS and shadow copy failure.
I have tried deleting shadow copy volumes and chkdsk /f /r, but I always get the following when trying to backup the server:
Event 55 NTFS
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolumeShadowCopy1.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="49156">55</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-11-20T09:28:52.255947800Z" />
<EventRecordID>158182</EventRecordID>
<Channel>System</Channel>
<Computer>SERVER1</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>\Device\HarddiskVolumeShadowCopy1</Data>
<Binary>0D000C000200380002000000370004C000000000020100C000000000000000000000000000000000804503000900000000000900</Binary>
</EventData>
</Event>
3/20/2014 9:00 PM,EFI System Partition, Local disk (C:), Local disk (D:),SERVER1 2013_06_12 21:24 DISK_01
(\\?\Volume{02c22814-d3a1-11e2-84f4-0090a9ba53a1})
Faulting application name: wbengine.exe, version: 6.1.7601.17514, time stamp: 0x4ce79951
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000374
Fault offset: 0x00000000000c4102
Faulting process id: 0x1c90
Faulting application start time: 0x01d004e8c00b9d9e
Faulting application path: C:\Windows\system32\wbengine.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: cb4c54ab-70dd-11e4-bbe2-0090a9b7bb8d
The Block Level Backup Engine Service service terminated unexpectedly. It has done this 1 time(s).
Additional Server Information:
OS Name Microsoft Windows Storage Server 2008 R2 Essentials
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SERVER1
System Manufacturer To be filled by O.E.M.
System Model WDBLGT0040KBK-21
System Type x64-based PC
Processor Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1795 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 4.6.4, 10/18/2011
SMBIOS Version 2.7
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name Not Available
Time Zone Eastern Standard Time
Installed Physical Memory (RAM) 2.00 GB
Total Physical Memory 1.99 GB
Available Physical Memory 537 MB
Total Virtual Memory 5.96 GB
Available Virtual Memory 2.95 GB
Page File Space 3.97 GB
Page File C:\pagefile.sys
I thought this might apply to my server: KB2754784
But my event 55 alerts only happen when windows backup attempts to create a shadow copy on a drive volume created for backups.
We use to be able to backup the EFI, C, and D partitions in the past. After a hardware failure and Motherboard replacement and a system restore, we can no longer backup the volumes without the Windows Block Level Backup Engine Service service terminated
unexpectedly and Event 55 NTFS.
How can I fix this issue?

Hi,
The issue could be due to the shadow copies on the backup volumes are corrupt. You could try to delete these shadow copies to check if the issue still exist.
For more detailed information, please see:
2008R2 Backup causing Event 55 NTFS Errors
https://social.technet.microsoft.com/Forums/windowsserver/en-US/5cbed1b1-63e3-4c15-8fff-b48746d5ba44/2008r2-backup-causing-event-55-ntfs-errors
You could refer to the article below to delete shadow copies:
Backup Version and Space Management in Windows Server Backup
http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Reading multiples files from a folder and processing

Hello everyone,
Im working on a project to analyst and process Acoustic Emission Signals. My problem is that I have a folder that containts several files .txt. Every file contains 16 waveforms (16 channels) that I need to process with an equation to detect the arrival times of the waves.
I have been working in this way : Running the labview code that open the file that I select .. then the processing happens on every wave and I click stop to select the file where I want to save the solutions. The solutions is only a vector of the 16 arrival times detected. Then I have to stop the code (by clicking Abort Execution) and repeat the process ... Run the code and bla bla bla .. and save on the same solution file that I used before.
The ideal situation is to read the files whitout stoping the execution of the code .. For example clicking a buttom to pass to the next file and saving all the solutions to the same file. That is beacause sometimes Im going to have more than a 100 files and this will give me a hard time if a forget in which file I was working. The idea is to make an automatic process.
Please .. I have been trying to find a solution to this while Im working in other part of the code. If someone could suggest me a solution it would be great.
Thanks.

Hello everyone,
Well Im sorry if I didn't post my .vi ... I was working on it ... and I found a solution (whit some help that I found on the forums) but Im not happy at all ... because I still have to give the last part of the file name.
For example at the beginning I have to input the file name without the final number of the event ...
C:\Users\Irish\Desktop\Hydraulic Fracturing\E1_evento
then I finish adding the file number that I want to process on the folder
C:\Users\Irish\Desktop\Hydraulic Fracturing\E1_evento2.txt or 9.text or ... just the number ...
This is the case when I want to process every file specifying the file .. but what could you suggest me to do process all the data file by file ?
I attached the part of the code that Im using for this specific problem ...
Im using Labview 8.5
Thanks ...
Message Edited by Alvaro_Ortiz on 08-26-2009 03:14 PM
Attachments:
MultReadFiles.vi ‏58 KB

Catch event in WDA and process in SAPGUI

Similar Messages

Maybe you are looking for