Catch Mapping Errors on the Exception Hander in a BPM

Hi All
I am struggling to catch maping error in the Exception Handler, so my question is that, is it possible the catch mapping errors in the Exception Handler using BMP
Thanks
Yonela

Hello Yonela!
In the Transformation Step properties you can specify the exception handler in case the step fail. For more information, please check the help pages below
Events:
http://help.sap.com/saphelp_nw72/helpdata/en/76/9856e633464052a47270ea6c49640a/content.htm
Modeling Exceptions and Exceptions Handling:
http://help.sap.com/saphelp_nw72/helpdata/en/54/bf98c82cd84614a85cfda25d70b175/content.htm
Best regards,
Lucas Santos

Similar Messages

Catch mapping error message in BPM Exception branch

Hi dudes,
Does anyone know how to catch the mapping runtime error message into a BPM exception branch? I know how to create an exception branch and how to trigger it, but I wonder whether it's possible to pass the mapping error message as shown in SXI_MONITOR (i.e. 'Cannot create target element XXXXX. Values missing in queue context').
Otherwise, everytime my BPM fails I will have to take the payload and run the mapping test in order to find out the reason of the error.
Many thanks in advance!
Paco

Thanks,
My problem is not about handling exception in BPM, but getting the mapping error description and then passing it to the exception branch.
I can see in the workflow log that this info is contained into the Exception container EXCEPTIONS[2] / T100MSG:
Message Class: SAI_MAPPING
Message Number: 217
Message Type: E
Message Variable: com/sap/xi/tf/_<MM name>
Message Variable: com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti
Message Variable: on: Cannot create target element /ns1:<path/field>.Message Variable: Values~
The text in bold is the one I am interested in to be get and mapped into the exception branch.

Catching Mapping error at runtime using a udf

Hi AlL,
I read some blog where it was discussed.. we can catch runtime error ? Is it possible?
how will we be able to catch the runtime error say during the mapping we got an error and we want to catch that error and log it somewhere or throw user defined exception?
I guess at runtime all the runtime details are stored in SMPPMAP3 table. which is the field which contain the any runtime error?

Hi,
you cannot do it using an UDF as a uDF will only work on fields that
are in the message
you can throw exceptions from UDF but not catch
to catch you can use an exception branch of a block stpe in an intgration process BPM
Regards,
michal

Mapping error in the BPM!!

Hi Fiends,
I have a BPM ..where I have the steps defined like this..
Transform -> send mail..
In the transformation ..I have a simple mapping program(source & the target structures have got one field)..
message type structures are like this..
source& target
Return key ---> 1:1
field1 --->1:1
mapping is like this :
Field1--->field1(when field1 is not empty)
If field1 is empty then -> I am sending some constant to the target ...and in the mapping it is working fine...
My mail is working perfectly when there is some value in field1..and I am getting a mail..
and when there is no value in field1..I am getting mapping error.
do you have any idea..how can I solve this issue..plz help me..
Thanks..

Raju,
Try tracing the "transformation" step in BPM. Check the instance of the message in sxmb_moni and click 'PE' so you will be in 'workflow log' here you could see the data flow of your message inside BPE. Here you can trace were your message got exception. If it is in transformation step then click on 'list tech details' (left top corner) then click on 'show container' button corresponding to that 'transformation step'. Its similar to using trace area in sxmb_moni. here you will be aware of mapping error.
Hope it will be helpfull.
Regards,
Yuva

Catch Mapping Error in File to IDoc scenario

Configured BPM and now learning Error Handling. I know that through BPM we can handle system Errors, but I doubt whether Mapping error is a system error.
I am interested to know the classification of errors with examples, preferably listing out all types of errors.
Please provide some weblogs or explain briefly how to handle system and application errors through BPM.
Thanks,
Raja

Hi Raja,
You will need CCMS if you want to send the Alerts to external system or you want to access the ALerts from the transaction. You can capture your alerts without this also.
When you go to Alert Configuration in the Runtime Workbench you can see Create Alert Rules. These rules are pertaining to the error generated in your AF,AE or IE.
Once you have completed the whole config. The error happening in the AE, IE or AF would trigger the alert. you can see this in your Alert Inbox.
The best would be if you go through the URL I have mentioned below.
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
You have to use BPM only if you want to do an activity after the alerts are raised.
Regards
Vijaya
Message was edited by: vijaya kumari

Catching an error from the component level in a plan?

I have components that installs a software package (using the LINUX rpm install plugin). These components are called in sequence from an SPS
"Plan". If any one of the rpm's to be installed by the plan might already have been installed, the rpm exits with an error message and a "1" exit code.
That exit, causes the whole install to stop dead in its tracks.
I have tried a "try and catch" to be allow the installation to continue
when that situation exists. Howvever, at the "Plan" level all I can catch is
any error. If a bad error; that is one that is not an "Exit 1" because the
rpm was already installed, but rather something that needs to stop the
entire plan ... the "catch" will ignore those errors as well.
Without modification of the SUN component install plugin, how in XML does one know what the exit code is from the install plugin
(a) within the component that calls the install plugin
(b) insde the plan XML that calls the component XML that calls the plugin
Are there global variables, passed return codes, inherited parameters or something that facilitates the passing of exit codes from plug-in to XML component to XML plan?

Hi,
Hope you have gone through the mentioned Notes for the pre-requisites. I checked the second Note which shows New and can not be implemented.
You can check whether the similar Notes have already been implemented in your system. Check with your BASIS team
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 11, 2011 11:59 AM

How to display the 500-internal server error on the Exception Handler page

Hello
My situation is as follows : JDev 11.1.1.0.2, ADF fusion application, one unbounded task flow containing 2 view pages view1.jspx and error.jspx
The error jspx is marked as the exception handler.
When an error occurs (typically a 500-Internal Server Error) the error.jspx is correctly displayed and shows our message such as 'Don't panic, please call our tech support'
What I would like to do is to display the actual error stack on this page along with our message.
I've searched around and I can't find how to either get the error stack in a bean or what EL expression should be used to get the error stack.
Can anybody help ?
Best Regards
Paul
Switzerland

The error will be the same, but the stack trace will be different, such as
Error 500--Internal Server Error
oracle.adf.controller.security.AuthorizationException: ADFC-0619: Echec de la vérification des autorisations : '/view1.jspx' 'VIEW'.
     at oracle.adf.controller.internal.security.AuthorizationEnforcer.handleFailure(AuthorizationEnforcer.java:145)
     at oracle.adf.controller.internal.security.AuthorizationEnforcer.checkPermission(AuthorizationEnforcer.java:124)
     at oracle.adfinternal.controller.state.ControllerState.initializeUrl(ControllerState.java:639)
     at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart2(ControllerState.java:449)
     at oracle.adfinternal.controller.application.SyncNavigationStateListener.afterPhase(SyncNavigationStateListener.java:44)
     at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.afterPhase(ADFLifecycleImpl.java:529)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchAfterEvent(LifecycleImpl.java:118)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchAfterPagePhaseEvent(LifecycleImpl.java:166)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchAfterPagePhaseEvent
What I would like is to display the above stack trace on the page marked as the exception handler....
Regards
Paul

Mapping Error - XML Parser Exception

We have a scenario where an ABAP Client Proxy sends a message to PI. This message is transformed into the mail package format and an email sent via the mail adapter.
The Interface Mapping has 2 steps. The 1st step uses an XSL transformation to format the <Content> as html. This step also sets the <Subject>, <To> and <Content_Type> fields. The 2nd step uses a graphical message mapping to dynamically set the <From> field based on the sender system.
We are experiencing the following intermittent error with this scenario:
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_EUK_MM_MailFrom_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
This relates to the 2nd mapping step (graphical message mapping) described above.
The message trace provides the following detail
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: Entity 'lt' undefined(:main:, row:3, col:227) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException
This suggests that the XML produced by the XSL transformation is invalid.
The strange thing is that it is very difficult to replicate the error as it doesn't always occur even with the same payload! If the message is restarted it processes successfully. Testing the interface mapping in the IR, with the same payload, works successfully.
I would welcome any ideas you may have on this.
Thanks
Mark

Hi Mark,
thing i know now why it works at "restart".
When the message comes first you get the character '<' in your xml for example: '&<(0'
and you get the ParserException.
Now the message is stored for queueing in the db. I assume the characters are now stored in the 'right way': '&amp;&lt;(0'
When the message now will be restarted everything works fine.
Regards,
Olaf

I got the following error message "The exception unknown software exception (oxc00000d) occured in the application at location Ox72b852c5" What does it mean and how do I fix it?

I am experiencing the following error message - Oxc0000022 as well - I have to open many of my programs as the administrator or I can't open them.

The following support articles should help:
* https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
* https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200

On some sites the following error message terminates the connection. Firefox.exe application error. The exception unknown software exception (0xc0000417) occurred in the application at location )x78579231.

Internet Explorer does not balk on those same sites. Most sites do not cause the disconnect but on those that do I must revert to IE to complete the visit.

Please reinstall Firefox as follows: 
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file ''to the desktop'' using IE8. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box''). 
#Next, reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

FlashPlayerPlugin_11_9_900_117.Exe – Application Error X The exception unknown software exception (0

How do I get rid of this error.

In my Mozilla Google Browser
Best Regards,
L.D. Bud Thatcher Jr
Metro Logo Ion Logo Tran outlook copy
Cell: 908-616-6495
Email: bt@metrosales reps.com
Visit Our New Website: <http://www.metrosalesreps.com> www.metrosalesreps.com

Error in Raising exceptions in a method and handling the same in the WF

Hi All
I tried to implement Raising exceptions in a method and handling the same in the workflow
in the same way given in SAPtechnical site .
1.by adding a error msg in exception parameter .
2. if the select query fails, to fetch the agent then :exit_return 9001 'ztable name' space space space.
3.in the Background activity in which this method is called there automatically one outcome appears ,and I hav acitvated that outcome and in that done what need to be done for that error handling - just send a mail to concern person .
4. in the normal outcome of the activity , the step to be executed are there .
but its not working , if exception come then the WF stuck there only . it do not follow the exception outcome .
Kindly help me , How can I do the exception handly in WF.
thanks & Regards
Kakoli

> That is usually the case - you catch an error in the underlying program and pass that back so the workflow can go into error.
> You're doing it correctly.
I don't think that's quite right.
If you define an error/exception in a method, it is automatically mapped to an outcome of the step/task.
If you activate that outcome, then you can handle the exception in a branch of the workflow.
For example: 'Remote connection is down, please contact Basis'
The step should only go into error if an outcome occurs that you have NOT activated.
So the original question is valid. Please give some more information on what the error message is..
chrs
Paul

How can I catch the exception type c = type i?

How can I catch the exception and display the error message when I assign the u2018ABC123u2019 value to an int data type.
Code is as follow.
REPORT zfsl_sum_functions.
DATA: cin(50),
      cout(50),
      iin TYPE i,
      iout TYPE i,
      etext TYPE string.
cin = '123ABC'.     " how can i catch this
iout = cin.
WRITE: iout.

The CATCH-ENDCATCH statement is obsolete as of release was620. You should use TRY. CATCH. ENDCATCH.
The exception that will be raise is CX_SY_CONVERSION_NO_NUMBER, so you have to catch that exception or a super class of this exception class.
REPORT zfsl_sum_functions.
DATA: cin(50),
cout(50),
iin TYPE i,
iout TYPE i,
etext TYPE string.
DATA: rf_cx_error TYPE REF TO CX_SY_CONVERSION_NO_NUMBER,
        errortxt TYPE string.
TRY.
    cin = '123ABC'. " how can i catch this
    iout = cin.
    WRITE: iout.
CATCH CX_SY_CONVERSION_NO_NUMBER INTO rf_cx_error.
    errortxt = rf_cx_error->get_text( ).
    WRITE errortxt.
ENDTRY.

Getting a mapping error to propogate from loop block within I.P.

OK I kinda asked the question as a sub topic under a different heading SXMB_MONI_BPE -> Message Payload not visible in container but didnt really get an answer I'm happy with, so here goes as a main topic!
The short description:
I have a mapping step that must reside in a loop block, any mapping errors I want propogated back up to the main container so that they error and appear in the trace within SXMB_MONI in the same visibly obvious way as a mapping step that is not inside a block does.
The long description:
I have an Integration Process which splits a source message, then maps the individual messages produced within a forEach block. Unfortunately when there is a mapping error within the block, it does not propogate any meaningful information back to the message trace. Instead it just fails in smq2 with permanent error in inbound bpe processing.
When I search in SXMB_MONI_BPE there are no process steps returned, as though the IP was never called by the BPE.
When I put the whole thing inside a block with an exception path that has an alert step, I do get process steps returned in sxmb_moni_bpe. When I examine the list with technical details I cannot see any "payload" under the table of messages that has been split out, therefor I cannot debug the mappings of individual messages I am looping on. I have LOGGING, LOGGING_PROPOGATION and LOGGING_SYNC set to 1, and TRACE_LEVEL set to 3 for my IE.
I have 2 scenarios/requirements:
1) I put the uncaught mapping exception in the loop blook, and the error is propogated back up and the smq2 error is subsequently not produced (like it would behave if the mapping step was not inside any blocks).
2) I catch exceptions and raise an alert and then the logging is enhanced sufficiently to enable the individual messages the loop block is looping on to be viewed within the container in sxmb_moni_bpe->list with technical details.
The only place I can see the error is in the defaultTrace log file, which is obviously not a suitable method for productive use. Any solution needs to be usable in day-to-day administration of a production system, even though this is a dev issue at present!
Thanks,
James.

James
I have used this for throwing smart exceptions in SXMB_MONI
http://agportal.goldeye.info/index.php?option=com_content&task=view&id=30&Itemid=40
Not sure if it would work in this instance...
Barry @ Axon!

DBIF_RSQL_SQL_ERROR with SQL error in the database when accessing a table.

dear all,
i have done a system copy from production server into quality server. quality was scrapped and freshly installed with SAP then used the DB flush method to carry out the system copy. i had to change the DBS_ORA_SCHEMA in environment variables to SAP<SOURCE SID> from SAPSR3. the sap version is ECC6.0,DB is ORACLE10.2 on WIN NT.
after MMC opened, i get "SQL error in the database when accessing a table" error is coming. in SM21, I am getting "Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000 )
Database error 8103 at SEL access to table TBTCO
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error 8103 at FET access to table TBTCP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
Delete session 001 after error 023
Database error 8103 at DEL access to table TMSALOGAR
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Database error 8103 at FET access to table SNAP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Transaction Canceled SY 002 ( SQL error in the database when accessing a table. )
Database error 8103 at FET access to table TSP02"
please find the st22 DUMP:
ow to correct the error |
Database error text........: "ORA-08103: object no longer exists"
Internal call code.........: "[RSQL/READ/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPMSSY2" or "SAPMSSY2"
"INITIATE_JOB_START"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INITIATE_JOB_START" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
|
please do me this favor if you know to avoid this problem..
thanks a lot..

Hello Anuj,
This is because the COUNT(*) is returning a value which is longer than the INT4 data type it is expecting. If you restrict the selection by introducing a WHERE clause, then you won't get the dump:
DATA: dyn_from TYPE string,
 dyn_where TYPE string,
 gx_sql_err TYPE REF TO cx_sy_open_sql_error,
 gv_text TYPE string.
dyn_from = `DD01L INNER JOIN DD02L ON DD02L~AS4LOCAL = DD01L~AS4LOCAL AND DD02L~AS4VERS = DD01L~AS4VERS`.
dyn_where = `DOMNAME LIKE 'Z%'`.
TRY .
 SELECT COUNT(*) FROM (dyn_from) WHERE (dyn_where).
 WRITE: / sy-dbcnt NO-GROUPING.
CATCH: cx_sy_open_sql_db INTO gx_sql_err,
 cx_sy_dynamic_osql_semantics INTO gx_sql_err,
 cx_sy_dynamic_osql_syntax INTO gx_sql_err.
ENDTRY.
IF gx_sql_err IS BOUND.
gv_text = gx_sql_err->get_text( ).
WRITE: / gv_text.
ENDIF.
BR,
Suhas

Catch Mapping Errors on the Exception Hander in a BPM

Similar Messages

Maybe you are looking for