CC in WM : Last Date of count

Hello,
We have defeined the categories as A - 4 times/year, B - 3 times/year, C - 3 times/ year and assigned to Material Master in MM, and we pass in WM for this same stock.We want to conserve the actual CC inventory procedure.
We would like to conserve the history and not loose the last count date.
We used to create Phy Inv doc every day, Is there any program wich permit us to charge the last Count date for our materials in WM?
Thank you for your help.
Best regards,
Fat
Edited by: Fatima MEFLAH on Nov 9, 2010 11:44 AM

Cycle count in WM is different from cycle count in IM.
A cycle count in IM is material based, while a cycle count in WM is bin based.
is each bin only occupied by just one material? or do you have somewhere mixed storage in a bin?
if mixed storage, and one of the materials in the bin is due to be counted, then you have to count all materials in that bin. That is the logic in WM.
if each bin has a single material, then you can write a report to copy the last count date from the material to the bin.

Similar Messages

Last Skipped Date, Skip count, are not updated in any songs that i listen in my iPhone5s

I've been using smart playlist that's relays on the play count, last skipped date and skipped count fields... I have been using an old ipod to heard my music through this smart playlist that live updates all the time and it was working great.
So my issue is, since i bought a new iPhone 5S and start using it to listen music, my smart playlist that relays on " play count, last skipped date, skipped count " fields are not updating, and when i connect my iphone to the PC i realize that those fields never update after i play or skip any song in my iPhone.
So, I'm not sure if this is an iPhone restriction, that i need to use my iPod again to get my smart playlist that relys on those fields to work... or my iphone is defective and need to re-install the iOS.
Any help on this matter will be enormously appreciated
Thanks in advance

I have playlists that rely on the Last Skipped and
Skip Count properties of songs, but these items only
seem to be triggered if the song is fast forwarded
between 3-20 seconds into the song. I tried to skip
I think this is how it's intended, though there isn't much info on this feature. I've seen the same behavior and other users have reported same.
One thing that threw me off for a bit using this feature was trying to use with playlists where the songs had "remember playback position" checked. Last skipped doesn't register at all with these tracks.

Getting data in a query on last date of all previous months

Dear Experts,
I need your help with a query.
I am trying to create a query which when run should pick the number of Open Sales Order on the last date of all the previous months from the start of company.
I could create the query for fetching the required data on last day of the previous month, say today is 25th June 2014, so my query only fetches data for May 31st 2014 but I need data for all previous month, May 31st 2014, April 30th 2014, March 31st 2014 & so on.
Please advise how to achieve this is SQL query.
Thanks & regards,
Nitin

Hi,
Try this:
Select *
from(
SELECT T0.[DocNum] as #,t0.cardcode as C, t0.docdate
FROM ORDR T0
WHERE T0.[DocStatus] = 'o' and T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-1,0)),10) OR T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-2,0)),10) or T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-3,0)),10) or T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-4,0)),10) or T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-5,0)),10) or T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-6,0)),10) or T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-7,0)),10)
group by t0.cardcode,docdate,T0.[DocNum]) S
pivot
(count(#) for c in([cvt01],[cvt02],[cvt03],[cvt04],[cvt05],[cvt06],[cvt07],[cvt08],[cvt12])) P
Note: Replace Cvt01,02...with your customer code.
Thanks & Regards,
Nagarajan

Customer Exit for Number of Days from 1 st Apr to last date of Month Enter

Hello BI Experts,
I have a requirement to count the number of days from 1 st April of current year to the last date of month entered.
For example : The use will enter say July 2010 or 003.2010 (as Fiscal Year Variant is V3 ).
Today is 14 July ...So we have to first find out the end date of the July month ie 31 st July
Then go to 1 st April 2010.
Now calculate the Number of days between 1 st April to 31 st July 2010.
I consider I have to create two Customer Exit variable
as below
1 st customer exit Bex variable say ZLY_MTH ( Last day of Month Entered)
and i_step = 1
2 nd Customer Exit BEx Formula variable say ZF_NUMDAYS ( Number of days between two dates)
i_step =1 .
Please provide me the logic for the above two.
Thanks in Advance.
Regards,
Amol Kulkarni

PSUDEO CODE:
1. Initially LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZMONTH'.
2. Get the Month input using VAR_MONTH2 = LOC_VAR_RANGE-LOW+4(2)
3. Now calculate Month+1: VAR_MONTH2 = VAR_MONTH2 + 1 (Refer **)
4. Now calculate the Current Year: VAR_YEAR = LOC_VAR_RANGE-LOW+0(4).
5. Get the 1st Day of the Month (VAR_MONTH2): CONCATENATE '01' '/' VAR_MONTH2 '/' VAR_YEAR INTO L_S_RANGE-LOW.
6. SUBRACT 1 (0DATE) from this DATE (This will give the logic for last day of the current month)
Insert this code also for using the date conversions
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = VAR_MONTH2
          IMPORTING
            OUTPUT = VAR_MONTH2.
Pls. check out this logic. Guess it would solve your need.
Thanks,
Arun Bala

Last Played, Play Count, Ratings fields not updating

iTunes 6.0.1.3, 3rd Gen iPod, iPod Shuffle 2005-09-23 firmware
After updating to iTunes 6.0.1.3 I was forced to also update my iPod firmware to 2005-09-23. Since then, the last played, play count and ratings fields associated with music tracks no longer updates when I re-synch my 3G iPod. Ive tested with ripped AAC, ripped MP3, older (FairPlay 1) purchased music as well as new (FairPlay 2) tracks. No matter what Ive tried, the dates, counts and raings remain frozen in their pre-update state.
However, these fields are updated for Podcast tracks!
I also ran a test with my Shuffle. Music file play counts are updated as usual. I do notice that the Last Played field within iTunes is updated with the date and time of re-sync. Has it always been this way? I havent paid attention to this since I first purchased my Shuffle but I thought it only updated play count, not Last Played.
Any advice would be appreciated.

Found the problem. After my iPod didn't update after purchasing new songs, I checked my iPod options. For some reason my iTunes iPod Options changed from "Automaticaly update ..." to "Manually manage ...". Once I set this back to automatic everything updated fine.
It is interesting that even when "Manually manage" was selected, a new Podcast trak was downloaded to the iPod and, after listening to it, the Last Played and Play Count fields were updated.
Also, regarding my question about the Last Played update with my Shuffle, I learned that iTunes 5 implemented a change to update this field with the current date and time once the Shuffle is re-synch'd.

Min,Max for a time Range and Sum of Records for the last date/time

Hi All,
I have a table with the following structure/data:
create table Events (
 [EventID]
int NOT NULL,
 [Title]
nvarchar(200) NOT NULL,
 [SourceName] nvarchar(20) NOT NULL,
 [Type]
int NOT NULL,
 [eDate]
datetime
insert into Events values(100, 'Event 1', 'S01', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S07', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S08', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S09', 3,'2014-01-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S010', 3,'2014-01-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-01-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-01-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S01', 3,'2014-02-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S02', 3,'2014-02-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-02-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-02-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-02-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-02-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S01', 3,'2014-03-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S02', 3,'2014-03-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-03-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-03-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-03-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-03-01 00:00:00.000')
And I wrote the following query:
select EventID as [Event ID],
 Title,
 count(distinct(SourceName)) as [Instances],
 Type,
 min(eDate) as [First Detected],
 max(eDate) as [Last Detected],
 datediff(d,min(eDate),max(eDate)) as [Delta (days)]
from Events
where type = 3
group by EventID, Title, Type
having max(eDate) <> min(eDate)
 and max(eDate) =(select top 1 eDate from Events order by eDate desc)
and I get the following results (see the instance number)
Event ID Title Instances Type First Detected Last Detected
 Delta (days)
=============================================================================================================================
100 Event 1 5 3 2014-01-01 00:00:00.000 2014-03-01 00:00:00.000
59
101 Event 2
3 3 2014-01-01 00:00:00.000 2014-03-01 00:00:00.000 59
102 Event 3
2 3 2014-01-01 00:00:00.000 2014-03-01 00:00:00.000 59
This is normal for this query however what I need to do is a little different.
In other words, while I need to show when we recorded a specific event first and last time,
I need to display the results for the last date/time when it was recorded.
For example what I need to provide should look like this:
Event ID Title Instances Type First Detected
Last Detected Delta (days)
=============================================================================================================================
100 Event 1 2 3
2014-01-01 00:00:00.000 2014-03-01 00:00:00.000 59
101 Event 2 2 3
2014-01-01 00:00:00.000 2014-03-01 00:00:00.000 59
102 Event 3
2 3 2014-01-01 00:00:00.000 2014-03-01 00:00:00.000
59
Could you please help me to fix this query?
TIA,
John

;With cte As
(Select EventID as [Event ID],
Title,
SourceName,
Type,
min(eDate) Over(Partition By EventID, Title, Type) as [First Detected],
max(eDate) Over(Partition By EventID, Title, Type) as [Last Detected],
eDate,
datediff(d,min(eDate) Over(Partition By EventID, Title, Type),max(eDate) Over(Partition By EventID, Title, Type)) as [Delta (days)],
max(eDate) Over() As MaxEDate
from Events
where type = 3)
Select [Event ID],
Title,
COUNT(Distinct SourceName) As Instances,
Type,
[First Detected],
[Last Detected],
[Delta (days)]
From cte
Where eDate = MaxEDate And [First Detected] <> [Last Detected]
Group By [Event ID],
Title,
Type,
[First Detected],
[Last Detected],
[Delta (days)];
Tom
P.S. Thanks for providing the DDL and data. That is always very helpful.

First and Last Date. Is is possible in Essbase?

Hello All, Here are the dimensions in my outline: - User - Application - Dates - Measures (Count, FirstLoginDate, LastLoginDate) I am trying to create a report in Essbase that shows the first and last date that each user accessed each Essbase application. I created an ETL process that builds a relational table with one record for each unique combination of User/Application/Day where a user was logged into an application. This process gets its source data from the Essbase application log files. I am loading a count of 1 to each intersection of User/Application/Day. I also want to add the first and last day to the cube but can not figure out how. 1) Is there an easier way to get at the source data then the application log files? 2) If the application log files are the way to go, how do I indicate in the cube what the first and last login days are for each combination of User/Application? I was thinking of loading the serial dates to the FirstLoginDate and LastLoginDate measures. The trouble I am having is where to load the dates data. Do I load it to level 0 (individual dates) and then use time balance to get the dates up to the higher levels (month, year) or load it at the higher levels? If I should load it at the higher levels, do I assume correctly I will need to create another relational table with one record for each User/Application/Month and User/Application/Year that shows the first and last dates? Any other ideas? Thank you in advance, Bill Handelman 847-989-1758 [email protected] 

While you may have natural ordering in your date dimensions, Essbase doesn't handle first and last dates well. The one area where ther is at least some funcionality in date manipulation is inattribute dimensions, however, the easy use there allows only one date attribute using normal date processing. It gets a great deal more complex using two dates. Look up the DBAG references to the date type of attribute dimensions, you might find it a partial solution to your problem. If you go the serial date method, load at level 0 and want to use time balance to bring the values up, you still need a time dimension. If I were designing something, I might use the first access date as a time dimension and the last access date in an attribute dimension, but I'm rambling rather than analyzing. In any case, look at the date type attribute dimension as one possible option for your cube.

Expression - First date and last date of current month, current year

Hi
I need to have 2 ssrs expression as I can use as default parameters in my report where I can - out from my Time dimension, get the
first date of the current, current year - and one where I get last date, current month, current year.
My data source is a SSAS cube and my timedimension is structured like this:
[Time].[Days].&[2009-01-16T00:00:00]
Any suggestions how to solve this ?

Hi ,
You can use below in Default Values in ssrs ;
for first Day of current month and year
="[Time].[Days].&[" +Format(dateadd("m",0,dateserial(year(Today),month(Today),1)), "yyyy-MM-dd")+"T00:00:00]"
output will be ;
[Time].[Days].&[2014-09-01T00:00:00]
For last day of current month and year
="[Time].[Days].&[" +Format(DateSerial(Year(Now()), Month(Now()), "1").AddMonths(1).AddDays(-1), "yyyy-MM-dd")+"T00:00:00]"
output will be ;
[Time].[Days].&[2014-09-30T00:00:00]
Please correct me if I misunderstood your requirement.
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem.

How to Plot number and string in one row (data logger counter) ?

hi all i made data log quantity using Digital Counter via modbus to monitoring quantity and reject that has and Name Operator, Machine and Part Number.
i have problem about plot the number & string in one row, as shown on the picture below :
how to move that string on one row ? i attach my vi.
Thanks~
Attachments:
MODBUS LIB Counter.vi ‏39 KB

Duplicate and answered - http://forums.ni.com/t5/LabVIEW/How-to-Plot-number-and-string-in-one-row-data-logger-counter-via/m-p...

Identify the last data package in start routine

Hi Everyone
We have a start routine in transformations. We require to do some special processing in the start routine only when the last data package is executing. How can we determine in the start routine that current package is last one or not ? Any pointers in this direction are appreciated.

Hi,
You can get packet Id from datapackid in start routine and end routine. But I'm not so sure how to identify the last packet ID, alternatively you can store this packet id in some where else and read the same value in End routine if your logic(processing) permits to do this in End routine instead of Start routine.
METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
hope it helps...
regards.
Raju

Last data update

Hi,
How I can find the last data update information(date and time) of multiprovider in BW?
Kindly help on this.
Regards
Mukul Singhal

Let me explain how the "last data update" works.
If the query is based on one cube or DSO, it is the time of the last request upload.
If the query is based on a multiprovider, like the example given ealier,
assume there are three cubes in multiprovider :
Last update of cube1 is 11/17/2008
Last update of cube2 is 11/19/2008
Last udpate of cube3 is 11/20/2008.
The "last data update" will be the earliest day of the "last data update"s of all partproviders, i.e.11/17/2008.
Because the meaning of "last data update" is that, data (of all partproviders) has been already updated until this time.
Now we assume there are three cubes like this in multiprovider :
Last update of cube1 is 11/17/2008
Last update of cube2 is 11/19/2008
Cube3 is empty. It has never been loaded with any request.
Then the "last data update" will be empty. Because until no time has all partproviders been updated. This is the design of the system.
Regards,
Patricia

How to get the last data point from a TDM file in LabVIEW?

Hello,
I am using LabVIEW to analyze some rather large TDM files, and I need a way to get only the last data point. So far, the only way I have been able to accomplish this is by reading the entire file. Is there a property in the TDM file or a function in LabVIEW that will allow me to get the index of the last item in a channel?
Thanks!
Christina

Do you want to avoid reading whole file and want to be able to reach or get the index of last value of channel? is there any specific reason? I am not sure you could do it without loading the whole file. But the easiest way would be just to use array functions "array size" would give you the index of last element.
-Nilesh
Kudos are (always) welcome for the good post. :-)

Get Last date of every Month in a year

Hi All,
I need to find last date of month for given year.
Example:
I used to pass date or year such as 2012 or 01-01-2012(DD-MM-YYYY)
SQL query needs to return last date of every month such as
31-01-2012
28-02-2012
31-03-2012
30-04-2012
31-12-2012
for above requirement i have written the following SQL
select rownum as row_count,
case when rownum=1 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as Jan_month,
case when rownum=2 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as Feb_month,
case when rownum=3 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as mar_month,
case when rownum=4 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as apr_month,
case when rownum=5 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as may_month,
case when rownum=6 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as jun_month,
case when rownum=7 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as jul_month,
case when rownum=8 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as aug_month,
case when rownum=9 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as sep_month,
case when rownum=10 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as oct_month,
case when rownum=11 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as nov_month,
case when rownum=12 then last_day(to_date(add_months(trunc(to_date('01-01-2012','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end as dec_month
from dual connect by level <= 12 order by rownum;
Result
Jan_Month
Feb_Month
Mar_Month
Apr_Month
may_month
jun_month
jul_month
aug_month
sep_month
oct_month
nov_month
dec_month
1
31-01-2014
2
28-02-2014
3
31-03-2014
4
30-04-2014
5
31-05-2014
6
30-06-2014
7
31-07-2014
8
31-08-2014
9
30-09-2014
10
31-10-2014
11
30-11-2014
12
31-12-2012
Excepted Result:
am excepted result as single row such as
Jan_Month
Feb_Month
Mar_Month
Apr_Month
may_month
jun_month
jul_month
aug_month
sep_month
oct_month
nov_month
dec_month
31-01-2012
28-02-2012
31-03-2012
30-04-2012
31-05-2012
30-06-2012
31-07-2012
31-08-2012
30-09-2012
31-10-2012
30-11-2012
31-12-2012
Kindly give me suggestion to archive above result.
Thanks&Regards
Sami

I agree with Marcus Pivot is the way to go about this... But on the other hand you almost solved it yourself.. just a max function was needed for your expected output:
select
max(case when rownum=1 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as Jan_month,
max(case when rownum=2 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as Feb_month,
max(case when rownum=3 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as mar_month,
max(case when rownum=4 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as apr_month,
max(case when rownum=5 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as may_month,
max(case when rownum=6 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as jun_month,
max(case when rownum=7 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as jul_month,
max(case when rownum=8 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as aug_month,
max(case when rownum=9 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as sep_month,
max(case when rownum=10 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as oct_month,
max(case when rownum=11 then last_day(to_date(add_months(trunc(to_date('01-01-2014','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as nov_month,
max(case when rownum=12 then last_day(to_date(add_months(trunc(to_date('01-01-2012','DD-MM-YYYY'), 'YYYY'), level - 1), 'DD-MM-YY')) end) as dec_month
from dual connect by level <= 12 order by rownum;
AND to avoid hardcoding you can also modify your query as :
select
max(case when rownum=1 then last_day(to_date(to_char(rownum),'MM')) end) as Jan_month,
max(case when rownum=2 then last_day(to_date(to_char(rownum),'MM')) end) as Feb_month,
max(case when rownum=3 then last_day(to_date(to_char(rownum),'MM')) end) as mar_month,
max(case when rownum=4 then last_day(to_date(to_char(rownum),'MM')) end) as apr_month,
max(case when rownum=5 then last_day(to_date(to_char(rownum),'MM')) end) as may_month,
max(case when rownum=6 then last_day(to_date(to_char(rownum),'MM')) end) as jun_month,
max(case when rownum=7 then last_day(to_date(to_char(rownum),'MM')) end) as jul_month,
max(case when rownum=8 then last_day(to_date(to_char(rownum),'MM')) end) as aug_month,
max(case when rownum=9 then last_day(to_date(to_char(rownum),'MM')) end) as sep_month,
max(case when rownum=10 then last_day(to_date(to_char(rownum),'MM')) end) as oct_month,
max(case when rownum=11 then last_day(to_date(to_char(rownum),'MM')) end) as nov_month,
max(case when rownum=12 then last_day(to_date(to_char(rownum),'MM')) end) as dec_month
from dual connect by level <= 12 order by rownum;
Easy way: (without connect)
SELECT LAST_DAY (TO_DATE (ROWNUM, 'MM')) AS Jan_month,
 LAST_DAY (TO_DATE (ROWNUM + 1, 'MM')) AS Feb_month,
 LAST_DAY (TO_DATE (ROWNUM + 2, 'MM')) AS Mar_month,
 LAST_DAY (TO_DATE (ROWNUM + 3, 'MM')) AS Apr_month,
 LAST_DAY (TO_DATE (ROWNUM + 4, 'MM')) AS May_month,
 LAST_DAY (TO_DATE (ROWNUM + 5, 'MM')) AS Jun_month,
 LAST_DAY (TO_DATE (ROWNUM + 6, 'MM')) AS Jul_month,
 LAST_DAY (TO_DATE (ROWNUM + 7, 'MM')) AS Aug_month,
 LAST_DAY (TO_DATE (ROWNUM + 8, 'MM')) AS Sep_month,
 LAST_DAY (TO_DATE (ROWNUM + 9, 'MM')) AS Oct_month,
 LAST_DAY (TO_DATE (ROWNUM + 10, 'MM')) AS Nov_month,
 LAST_DAY (TO_DATE (ROWNUM + 11, 'MM')) AS Dec_month
FROM DUAL
Cheers,
Manik.

Variable last date of previous month/last date of current month

Hello Experts,
I am facing an issue while designing a query.
Requirement is like this.
Report will be run on monthly basis.so on execution of report, it should prompt for month/year.
now on report there are two columns for which I have to get data on date basis(last date of previous month and Last date of current month).
Can anyone tell me is there any standard variable for this? what is it?
or how to achieve this?
Regards,
Nirav

Hi,
See if this post in this forum can help you.
Re: Last date of a month
Regards
Shalabh Jain

First date and last date of current year

Hi
how can i get first and last date of current year, thanks for your help

hi,
use FM......... FIRST_AND_LAST_DAY_IN_YEAR_GET
DATA: first LIKE sy-datum,
      last LIKE sy-datum.
CALL FUNCTION 'FIRST_AND_LAST_DAY_IN_YEAR_GET'
EXPORTING
    i_gjahr     = '2007'
    i_periv     = '24'
IMPORTING
    e_first_day = first
    e_last_day = last.
WRITE: / 'First Date', first, '    Last Date', last.
Regards
CNU

CC in WM : Last Date of count

Similar Messages

Maybe you are looking for