Ccbpm not accepting sync send

I am working on a Integration Process in PI 7.3. When I create a receive or send step in it, it does not allow me to change the 'Mode' from the default Ansynchronous to any other mode.
I have worked extensively on ccBPMs on older XI/PI versions but new to 7.3. Are there any new settings that I need to configure? The installation is a dual-stack one. It lets me create all the steps in the ccbpm but have this one issue. Am lost here.
Ought to be some simple setting somewhere or some profile parameter. Have checked XPI Service is not AEX. It is XPI.
Has anyone else faced this issue with 7.3?

This is quite strange. Can you see the option and can't select it? Or the option is not visible at all?
I know that there have been changes in user Roles with 7.3 but they were more for administration and monitoring. You may still have a look at SAP Note 1377867. If you are stuck from everywhere, why not try this.
Regards,
Prateek Raj Srivastava

Similar Messages

I had trouble with a iTunes download. Two songs of an album were not complete. I contacted iTunes and yawl post the the download again. My iTunes now has the complete copies. The trouble is my iPhone will not accept/sync the complete copies. What up?

I had trouble with a iTunes download. Two songs of an album were not complete. I contacted iTunes and they redownloaded the tunes. My iTunes now has the complete copies. The trouble is my iPhone will not accept/sync the complete copies. It will only play the original incomplete copies of these songs. I've made new playlists and made sure I had the correct items checked to backup/sync. Still only the incomplete copies are played via the iPhone. What's up? What can I do to get to the iPhone to sync the correct version?

- Are you saying that they are not listed in your Purchased section?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Are they listed in your Puchases history when you log into your account on your computer?
- Are they still available now for purchase? If not then you are out of luck
If they are still available and listed in your Puchase History then contact iTunes
http://www.apple.com/support/itunes/

Ipod nano not accepting synced music from itunes

Somehow my music erased from my ipod during my last charge. Now when syncing my music from itunes the music is not going on to the ipod. Any answers out there?

Try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

Application fault for Sync Send holds up the ccBPM queues

Hello Experts,
I have the following scenario which I have realized using a ccBPM in SAP PI 7.31.
I receive a nomination idoc from ECC from which I create a nomination request to be sent in Sync manner to a web service. The response received from the web service is sent through another idoc, back to ECC. In case of any failure during this, an ALEAUD idoc is sent back to ECC to convey the failure. This web service returns an application fault in case any data in the request is improper and there is no fault message in the WSDL for the web service.
I have used a ccBPM to receive the nomination idoc from ECC, transform it to web service request and send it using a Sync Send step. In case an application fault occurs, the SOAP receiver channel shows the error as application fault and my Sync Send step does not receive the expected response. However, a SOAP message with envelope is received from the web service which leads to the BPM queue land in error 'Permanent error in BPE inbound processing'.
However, in case of the application fault I want to make the Sync Send step trigger an exception so that the ALEAUD idoc is sent back to ECC system.
Any thoughts on how i can achieve this?
Thanks in adv.
Diptee

Hello Experts,
I have the following scenario which I have realized using a ccBPM in SAP PI 7.31.
I receive a nomination idoc from ECC from which I create a nomination request to be sent in Sync manner to a web service. The response received from the web service is sent through another idoc, back to ECC. In case of any failure during this, an ALEAUD idoc is sent back to ECC to convey the failure. This web service returns an application fault in case any data in the request is improper and there is no fault message in the WSDL for the web service.
I have used a ccBPM to receive the nomination idoc from ECC, transform it to web service request and send it using a Sync Send step. In case an application fault occurs, the SOAP receiver channel shows the error as application fault and my Sync Send step does not receive the expected response. However, a SOAP message with envelope is received from the web service which leads to the BPM queue land in error 'Permanent error in BPE inbound processing'.
However, in case of the application fault I want to make the Sync Send step trigger an exception so that the ALEAUD idoc is sent back to ECC system.
Any thoughts on how i can achieve this?
Thanks in adv.
Diptee

HT204088 When trying to update my credit account information, it will not accept the month of experation even though it has been entered. I shut the phone down and tried again, I sync it to the computer. Will not work. What do I do?

I was trying to add and app to my iphone and was not able to do so. It wanted updated credit information. So, I entered it and it will not accept the month of experation. I have shut the phone down, sync it to the computer to update. Will not work. What can I do to continue?

Off the top I dont thing its good practice to post an email address here
I dont see how a google password change would impact on ur Apple ID/iTunes account
Have u access to the old email address? If not and you fail the apple security process then you need to call them
Have u tried to manage ur apple id from : appleid.apple.com

On my iphone, icloud is set to an apple id that i no longer use and i keep getting asked to enter a password. Cannot remember the password. When i try to re-set the password, it sends a email to a address no longer used. Will not accept any dob i enter

I have icloud on my phone with an apple id that I no longer use. I keep getting asked to enter the password for this ID. However I can't remember the password.
When I try to re-set the password, a e-mail will be send to an address I no longer use and can't access.
I then try to answer the security questions, but the date of births I enter are not accepted
Any ideas?
Paul

Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

HT204053 i changed my email address (apple id) on my pc, but now my ipad is asking me for my password with the old email address...and not accepting the old or new password.how do i change it/sync it?

I changed my email address (apple id) and password on my pc, but now my ipad mini icloud is asking me for my icloud password with the old email address and not accepting the old one or the new one..how do i change it / sync it?

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, and your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

HT1277 I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it.

I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it. This is the 1st time I've had this problem.
slpmtns

Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other

Apparently when I send to a Group of Contacts they can all see every email address and this is not acceptable how do I avoid that

I need to send to a group of about 50 parents. Their addresses are held in a Group of Contacts. I highlight the group name to distribute a message to all of them and what I am being told is that they can then all see every email address. This is not acceptable as many do not want their email address being made public in this way. Surely this should not happen or at least there should be a way to avoid it.

re: and I quote "they can then all see every email address. This is not acceptable "
I showed you the basic method of sending a group as Bcc - which is what you initially asked for.
As you now specify that not only do you want to know how to use Bcc but every email needs to be personalised - not just distributing a message to all of them, then I would agree with Matt and advise you use Mail Merge. This creates separate emails - not a bulk email to several recipients, so using a TO field will only send to that person - other people will not see other email addresses.
Matt has offered the link.
Here is some more info regarding Mail Merge.
'''How to install Add-ons:'''
download the .xpi file to your computer eg: desktop or downloads folder.
In Thunderbird
'Tools' > 'Add-ons' OR 'Menu Icon' > 'Add-ons'
click on the gear wheel icon and select 'Install addon from file'
see first image below as aid.
locate the file you downloaded and click on 'Open'
You may need to restart Thunderbird.
Mail Merge will appear in the list.
see second image below.
'''How to set up a Template emails for Mail Merge:'''
Create a Template email, which contains the 'personalised' sections.
see example - third image below.
I set the Subject as 'Mail Merge' so it is easily identifiable.
Save it as a Template email.
It will get stored in the 'Templates' folder. If you do not see a Templates folder, this is auto created when you create the first email and store as template.
'''When you want to use Mail Merge.'''
Select the Template folder.
Select the 'Mail Merge' template
either double click on the email in the list or right click on email and select 'Edit as new message'
you can then change the Subject and compose or edit the message - but do not change the sections in the curly brackets - the point of saving this as a template saves you from typing it each time.
'File ' > 'Mail Merge' (see third image)
This will open a new small window
see the fourth image below.
I would suggest you use 'Send Later' option . this will put all the emails in your Outbox, but it does allow you to check the email is correct - or do spot checks. Then you can choose to send them all in one go.
Right click on 'Outbox' folder and select 'Send unsent messages'.
Hope this info helps you.
As you are new to Thunderbird, you may or maynot have managed to locate all your toolbars.
The fifth image shows you how to enable all toolbars to make life much easier.
In addition some very useful info on maintaining a healthy Thunderbird and all about compacting- what it does and why it is important.
* http://kb.mozillazine.org/Keep_it_working_-_Thunderbird
* http://kb.mozillazine.org/Compacting_folders

Cannot sync Keychain with MobileMe - password not accepted

I have installed SL twice after talking with Apple Support. On my MacBook Pro, immediately after installing SL I received a message to input the master Keychain password for my MacBook Pro. I had never see this message before installing SL. I never had separate password for my keychain, so I input my master logon password. It was not accepted.
I posted this problem in a different thread under Apple Support and received advice to delete certain preference setting, use Keychain first aid, restore to default, etc. I did all that. No luck.
I called Apple Support and the representative walked me through similar steps before advising me to reinstalling SL.
I reinstalled, no fix. All that I have done is set my MobleMe preferences to NOT sync the Keychain so I won't get the message anymore.
I also have an iMac and have had NO problems with the SL installation.
Any advice or suggestions on a more permanent fix would be extremely appreciated! Thanks!

I'm having real issues as well with my keychains on one of my machines. Are you having similar problems to what I have listed in http://discussions.apple.com/thread.jspa?threadID=2130442
Note that if your keychains are hosed, like mine appear to be, you will have trouble doing anything with MobileMe.

My machbook pro has suddenly stopped syncing with icloud. I am giving password of my apple ID but its not accepting. but by the same ID and pass i can open my icould in browser.

my machbook pro has suddenly stopped syncing with icloud. I am giving password of my apple ID but its not accepting. but by the same ID and pass i can open my icould in browser.

Another user just has a similar issue tonight and I advised him to go to the below Apple support link to see if the password was recognized there, which eventually resolved his username/passowrd issue. Give it a try and see if it works.
https://daw.apple.com/cgi-bin/WebObjects/DSAuthWeb.woa/wa/classicLogin?appIdKey= 58ef9db8ff4d201409e7270a68e4408ae1678e1618204c476572a1b5e5fb3518&path&language=U S-EN

When I accept or send a call on FaceTime, it does not connect. It will just hang up the call, how do I fix this?

when I accept or send a call on FaceTime on my macbook pro, it does not connect. It will just hang up the call, how do I fix this?
This has been going on since about June. It is annoying that I cannot use FaceTime on my computer. I then switch to using my phone or iPad, which work perfectly fine. It is just specifically my computer. Help Please

when I accept or send a call on FaceTime on my macbook pro, it does not connect. It will just hang up the call, how do I fix this?
This has been going on since about June. It is annoying that I cannot use FaceTime on my computer. I then switch to using my phone or iPad, which work perfectly fine. It is just specifically my computer. Help Please

HT1506 mail on my mac will suddenly not accept my password - for instance if I want to send photos

Mail on my mac will not accept my password - which has been changed - the result being I cannot send pictures directly from iPhoto or respond to certain messages. Thank you

Am experiencing same exact difficulty slinkmomo. Let me know if you resolved it and steps to take please. Love You. :-)

Sync does not accept my e-mail

set firefox 29, checked in, made a sync, and then broke my hard drive. Now I bought a new and trying to get in sync, but it does not accept my e-mail! I really thought that was used a different e-mail, but he did not prinmaet generally not one of them! password recovery is the same! what do I do? I am very upset

Hi bvnglvdesh,
Thank you for your question. At this time there is a new sync that came out with the latest version of Firefox.
Please make sure that the old account was not set up on the old sync. [[How to update to the new Firefox Sync]] and [[How do I set up Firefox Sync?]]
Please post back if you have more questions.

Ccbpm not accepting sync send

Similar Messages

Maybe you are looking for