CCM 2.0 Move column on list results

Hi
When in shop launch the catalogue (same window).
Search and get a list of results
The end column is ACTION with the shopping cart .gif for add to cart.
Does anyone know how to move the column from the right hand side of the screen to the left. for example.
This is not a characteristic which available for moving via ccm config.
Thanks

Hi Kay,
I am not sure whether this is wht u r exactly looking for but still u can have a look on the link mentioned below -
https://websmp204.sap-ag.de/ibc-srm
Here u can see the catalog content management.
Thanks.

Similar Messages

  • How do I add a column to the Result for BT111S_OPPT

    Hi,
    I have a requirement to include a header level partner in the Results view of BT111S_OPPT.  It is already possible to search by this partner function but the partner column is not available on the view 'BT111S_OPPT/Result'.  My research has pointed me toward using the "ITERATOR" but a related blog was not available and I must admit that I am rather confused as to how to use the "ITERATOR".  I am assuming that I can use it to GET->CURRENT but then I don't know what to do after that.
    Any help is appreciated as we are under time pressure.  Thanks.
    Cheers,
    Paul

    Hi,
    iterators are normally used to convert data in lists which are already evaluated.
    In your case you better add a new column to the result list node and implement the getter with your own
    code. This would look quite similar like (just an example)
    METHOD get_po_number_ship.
      DATA:
            lv_po_number_ship TYPE crmt_po_number_ship,
            lr_current TYPE REF TO if_bol_bo_property_access,
            lr_entity  TYPE REF TO cl_crm_bol_entity.
      IF iterator IS BOUND.
        lr_current = iterator->get_current( ).
      ELSE.
        lr_current = collection_wrapper->get_current( ).
      ENDIF.
      TRY.
          lr_entity ?= lr_current.
          lr_entity ?= lr_entity->get_related_entity( iv_relation_name = 'BTItemSalesSet' ).
          IF lr_entity IS BOUND.
            lr_entity->get_property_as_value( EXPORTING iv_attr_name = 'PO_NUMBER_SHIP'
                                              IMPORTING ev_result    = lv_po_number_ship ).
          ENDIF.
        CATCH cx_sy_ref_is_initial.
          RETURN.
      ENDTRY.
      value = lv_po_number_ship.
    ENDMETHOD.
    Regards,
    Wolfhard

  • How to move a contact list to external hard drive

    How can I move a contact list to external hard drive? I can not migrate bewtween computers so I want to down load then transfer to the new imac. Will this alswo work for favorites list? thank you

    If you mean, move your Address Book contacts to another Mac
    Open Address Book
    Do File > Export > Address Book Archive
    Copy the resulting archive file to your new Mac
    Open Address Book on your new Mac
    Do File > Import
    Locate your Address Book Archive file
    Import
    You can use a similar process to move your iCal calendar to your new Mac
    To copy (move) your Safari bookmarks,
    Open Safari
    Do File > Export Bookmarks.
    Copy the resulting file to your new Mac
    Open Safari on your new Mac
    Do File > Import Bookmarks

  • BEx analyzer don't work move columns in report (like drill down)

    Hi
        I have an issue on BEx Analyzer...    When I built one report... add some characteristics and soo on... but then I need to move the order of columns... then I try to drill down.. or move to order of column... It doesn´t work,
        I did this function before.. when the poin of the mouse it's convert with other draw... like -->
                                               <--
        But this time it's not possible...
        Then If I press the icon that say design mode... I saw that the option of navigation is active... and when I close the design mode... the functionality of move columns work...:(
        It's difficult that each time that the user need to move columns in Bex will go to design mode... just for activate.. 
        I know thta we have some function on context menu.. for move columns one by other... but not for certain position..
        Could you help me please?
        I will appreciate your help and I will assign points for your answers.
    Alice

    Hi Alice,,
    This happens some time, when i am unable to drill down by just dragging and dropping the columns. though i could not find out why. Best thing, what i do, i refresh the query and next time it works Ok.. and other th ing what you can do, right click, on the characteristics list on the left pane, go to "change drilldown", then " drill down by" there the user can select the option he is looking in for.
    Hope this helps.
    Shakeel.

  • How can I move my contact list to new ID account and question about updating iOS

    How can I move my contact list to new ID account?
    And should I update my iOS system ?

    Hello Godde
    Lets start with checking out the articles below for setting up Family Sharing and more information about Apple ID’s. I will say that you will not be able to transfer any purchases to a different Apple ID, but you can rename the Apple ID. If you want to use Family Sharing, then you will need to just create a new iCloud account and then follow the steps in the second article to start sharing content between you to.
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Sharing purchased content with Family Sharing
    http://support.apple.com/kb/HT201085
    Regards,
    -Norm G.

  • Custom column in List view

    Dear guru's,
    I'd like to ask you if its possible to add custom column in list view. For example in tc. FBL1N I'd like to add a column with custom text (for example with value "1" for counting the sum of rows). Is it possible to do without creating custom program?
    Thank you all.
    Regards.
    Michael.

    Hi Michael,
    It's not possible to add some extra text in standard out-put without modifying it or creating custom program.
    For adding a column in your list view. I think this write statement will help you
    WRITE 'You can overwrite the following line:'.
    FORMAT INPUT ON INTENSIFIED OFF.
    WRITE 'WRITE HERE'.
    FORMAT INPUT OFF INTENSIFIED ON.

  • How to get the number of columns in a result set???

    hi everyone..
    i am trying to establish a servlet applet communication....
    my applet send the sql query to the servlet as serialised string and then the servlet executes the query...
    Since i need to pass the result back to the applet, i thaught of passing the whole reult set to the applet..but that seems to be not possible..
    so i thaught of storing my result set data in a vector and then pass the vector,but the first problem that i came across is that how to get the number of colums in a result set....
    so is there a way to get the number of columns in a result set...???
    and also i would like to know if it possible to send my whole result set to the applet bye serialization or by any method...???
    thanx in advance

    You shouldn't do. It expenses resources (you should always close the ResultSet and the Statement as fast as possible). Simply gently process it into a Collection or Map of DTO's. Those are serializable.

  • Updating a title column in list that is a lookup column to document library in sharepoint designer workflow 2010

    Hi I have a requirement to create a list item in Contracts List when a document is uploaded in Contracts Vendor library.
    Contracts List will
    have  columns - Contract Name ( title column), Contract Number, Contract Start date and end date.
    Contracts Vendor library will have Contract
    Name,Contract NUmber.
    User will select the Contract Name from drop down ( this is look up column linked to Contract Name in Contract
    List).When user uploads document in Contract Vendor library then item should be created in Contract List with selected Contract Name and
    Contract number .
    Contracts and Contracts Vendor are related by look up Contract Name. Contract Name is internally a title column in
    Contracts List.
    Issue1 :
    Since Contract number is look up column, while I am creating item the Contract name is not getting updated in
    Contracts List. I have to use sharepoint designer workflow to achieve this task. Title colum or Contract Name shows no title.
    Issue 2:
    One
    more issue I am facing is that Contracts List has Section and Division cascaded drop downs when i select values from section and division
    dropdowns and save item in Contracts list the values are getting saved in Contract List.
    Could anyone suggest me how to handle this ? I am
    attaching the screenshots of the list and library structure. TRuly appreciate your help.
    Below are screenshots of the list structure

    Hi,
    According to your post, my understanding is that you wanted to update a title column in list that is a lookup column to document library in sharepoint designer workflow 2010.
    I try to reproduce the issues as follows:
    Create a custom list named Contracts List, add columns: Contract Name ( title column), Contract Number(Number), Contract Start date(Data and Time) and Contract End date (Data and Time).
    Create a document library named Contracts Vendor library, add columns: Contract Name(Lookup), Contract NUmber(Lookup).
    Create a workflow associated to the Contracts Vendor library.
    Add action: Create List Item.
       5. Start the workflow automatically when an item is created.
       6. Upload a document, select the Contract Name and Contract NUmber, the workflow will be started automatically.
       7. Open the Contracts List, an item will be added with the Contract Name and Contract Number in the Contracts Vendor library.
    Thank you for your understanding.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • HT1539 I recently downloaded my digital copy of titanic and from the itunes extras screen I push play and nothing happens.  The movie is not listed, only the itunes extra is listed in the list.  How do I repair?

    I recently downloaded my digital copy of titanic and from the itunes extras screen I push play and nothing happens.  The movie is not listed, only the itunes extra is listed in the list.  How do I repair?

    I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

  • Query Report - To display additional column in list selection box.

    Hi,
    There is query report where i want to display the additional column in list selection.
    Below is the system query report, where parameter passed is card code.
    When the cardcode - list selection is clicked system displays 2 columns i.e. Customer Code & No. of Records.
    Now in the same list selection; is it possible to display the customer name along with cardcode only for reference.
    SELECT T0.DocDate, T1.SlpName, T2.Name, T0.DocDueDate, T0.DocNum,    (CASE WHEN T0.DocStatus = 'O' THEN 'Open' ELSE 'Closed' END) AS Status,    T0.DocTotal FROM OQUT T0 LEFT JOIN OSLP T1    ON T0.SlpCode = T1.SlpCode LEFT JOIN OCPR T2 ON T0.CntctCode = T2.CntctCode WHERE T0.CardCode = N'[%0]'    ORDER BY T0.DocNum DESC
    Kindly let me know the details.
    Thanks & Regards,
    Yogesh Jadav

    Hi Yogesh Jadav,
    The answer is NO.  You may only display either code or name but not both.
    Thanks,
    Gordon

  • How can I get two column selection list in my html form

    I required to have two column selection list in my jsp page to show name and description of a product. How can i achieve this functionality or is there any other alternative to do so.

    If i understand correctly: you can't actually create two columns in a list because it can only hold one value. The only way to achieve what you want is by concatenating the two values you want to display and put this as the value of the listbox.

  • Getting the name of the table of a column in a result

    I am connected via ODBC (3.52) to an Oracle 8i Db in a Windows 2000 application and want to get the name of the table a column of the result belongs to. I tried SQLColAttribute and SQLGetDescField with SQL_DESC_TABLE_NAME (that works fine with MsAccess), but always get an empty string. Is there another way of getting such information, or do I need another driver, or am I lost in space and time now?

    You can query ALL_TAB_COLS directly if you want.

  • How can I move columns in Numbers without distorting the formula in other cells?  In Excel I can cut and paste entire columns and the formula in other cells adjusts accordingly.  When I do it in Numbers, the formula messes up.  How can I do this?

    How can I move columns in Numbers without distorting the formula in other cells?  In Excel I can cut and paste entire columns and the formula in other cells adjusts accordingly.  When I do it in Numbers, the formula messes up.  How can I do this?
    For example: I have formulas in columns D and F that relate to columns C to CU
    If I want to move one column from one position to another (say S to T), the formula loses the colums that was moved, i.e. it doesn't recognize it has moved, rather sees it as deleted...  How can I do this without distorting the formula?

    Thanks for the feedback.
    If I often urge askers to look at the available resources, it's because  a large range of questions asked in the forums are already answered in these documents.
    As they are PDFs, they are easy to search in.
    CAUTION
    Download them while they are available.
    Given what is delivered with iBooks Author, I'm afraid that we will not get such easy to use documents.
    Searching infos in the  iBooks Author documentation available on line is awfully cumbersome and a lot of embedded links are wrongly flagged this way. In the Help files they aren't links but underlined strings.
    It seems that the tool used to generate the web pages was wrongly configured.
    Yvan KOENIG (VALLAURIS, France) dimanche 22 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
    My iDisk is : http://public.me.com/koenigyvan

  • How to move columns in SBO forms

    Hello,
    I would like to know if it is possible to move columns in SBO form tables.
    If yes, what is the way to do that?
    Thank you.
    Thibault

    Hi Thibault,
    In the 2005 SDK there is a new object in the DI-API called <i>ColumnsPreferences</i>. Maybe you should look into that. The <i>TabsOrder</i> property is the one you need I guess...
    Do a search on this forum on <i>ColumnPreferences</i> and you should find a few examples how to get the right column (it's tricky).
    Hope it helps,
    Rowdy

  • Windows Desktop Search 4.0 How do I Format the Date Column in the Results?

    Is there a way to modify the date column in the Results pane of Windows Desktop Search 4.0?
    It's running on a Windows 2003 Enterprise server.
    I have users that need to modify files that arrived today and yesterday after 5:00 PM.  The date column only displays the time on files with today's date.  Is there some registry setting I can tweak to get this column to always show Date and Time?
    Cordially,
    RN

    Hi,
    For the Windows Desktop Search, i think you may ask in:
    http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?forum=windowsdesktopsearchhelp
    Regards.
    Vivian Wang

Maybe you are looking for