CCME integration with Microsoft Business Contact Manager

Hi,
Can anyone tell me, if a CCME can be integrated with Microsoft BCM such that when a call comes in details of the client pop up, should they exist in the Business Contact Manager.
Finding exact information is like find a needle in a hay stack.
Regards
LN

Hi Swinster,
Apologize for the late reply.
What is your current situation? As JS2010 stated, also in this KB article:
http://support.microsoft.com/kb/2101557
During the 'Specialize phase' of Sysprep, Sysprep.exe looks at the Last Modified Date of the ntuser.dat file for each user profile to determine which user profile to copy to the default user profile. However, the earlier cleanup functions of sysprep.exe
loads each Ntuser.dat file to make security ID (SID)generalizations. You cannot predetermine which user profile will be copied if more than one user profile exists.
How about we skip the copyprofile option?
Further, see if the following article would help to customise the user profiles settings:
Configuring Default User Settings – Full Update for Windows 7 and Windows Server 2008 R2
http://blogs.technet.com/b/deploymentguys/archive/2009/10/29/configuring-default-user-settings-full-update-for-windows-7-and-windows-server-2008-r2.aspx
Or we may consider seek help at the office outlook forum for the BCM deployment.
Best regards
Michael Shao
TechNet Community Support

Similar Messages

Microsoft Business Contact Manager 2013, addiiton MSSQL NT Service accounts and Sysprep deployment on WIndows 7

Hi all,
I'm running into a problem when trying to sysprep and deploy a Windows 7 image with Business Contact Manager pre-install during the audit mode. Before anyone shouts, I have posted the main question in the Windows 7 deployment forum, but I would like some
additional help as to what the "NT Service" Accounts are for with regards to the BCM insatalltion
During the installation of BCM, we get an installation of MSSQL, and during this installation MSSQL creates three user accounts used by the "NT Service" account:
MSSQL$MSSMLBIZ
MSSQLFLDLauncher$MSSMLBIZ
ReportServer$MSSMLBIZ
When you run 'sysprep' with generalise option, and use the CopyProfile in the Specialise pass, sysprep copies the profile information from the last 'changed' profile. Whilst this should be the Administrator profile (as far as I can see), what is happening
is that the profile from 'ReportServer$MSSMLBIZ' is being used.
The rule of thumb when using the CopyProfile option is to ensure that only ONE account is present - i.e. the current administrator profile. The easy option is therefore just to delete the MSSQL accounts.
In the current state of play, even after I deploy the generalized image (with the copied 'ReportServer$MSSMLBIZ' account), I end up with only three users when looking at
"Manage --> Local User and Groups" (the Administrator, Guest (disabled) and HomeGroupUser$ user), so all the above "NT Service\MSSQL" accounts disappear during the sysprep process in any case.
I'm not sure what the effect will be on BCM for the end user. Does anyone have any suggestions as to what might be the best course of action.
Cheers
Chris
Chris

I don't suppose anyone has got any cluse about these users, what they do and how best to then deploy BCM as part of an image?
Chris

Microsoft Business Contact Manager for Mac?

I recently moved from PC to Mac and overall have had very few integration issues when working with my colleagues who are still PC based. My office recently upgraded to Office 2010 with BCM and even when I have added Office for Mac 2011, I do not have visibility or access to BCM with my Mac. Does anyone know of a way that I can integrate with BCM through my Mac?

Hi,
to my knowledge the BCM is an add-in for Windows-Outlook only.
http://www.officeformac.com/ms/ProductForums/Outlook/100
regards
Stefan

Synching Contacts for Outlook 2003 with Business Contact Manager

Is there anyway to get the ipod Nano to sync with a business contact manager contacts list.
When I choose to sync it doesn't show me any groups or contact lists. It does sync my normal contacts but not my business contacts in business contact manager. DOes anyone know if Ipodsync will do this?

From Business Contacts, you can drag a business contact and drop it on the contacts database. This creates a copy of the business contact in the traditional Outlook Contacts Folder which will synch to your BlackBerry. It's manual and not a perfect solution but it works.

Icloud and outlook business contact manager

How do I get icloud to work with outlook business contact manager?

You can also try them here.
http://social.technet.microsoft.com/Forums/office/en-us/home?forum=outlook
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Business Contact Manager - migration 2010 to 2013

Hello,
I recently migrate my BCM 2010 database to 2013 following the link "Business Contact Manager for Microsoft Outlook 2013: Update for Upgrading from Business Contact Manager 2010".
At beginning everything went smoothly and I thought that everything has been migrated successfully.
Unfortunately, when I was checking my data more carefully, I found that some fields are now mixed up. This happened inside accounts and professional contacts forms.
The options and labels for fields email, address and phone are all mixed up.
Examples:
- Field email address, when selected "email 3", label changes to "work", this label belongs to address field.
- Field address, when selected "work", label changes to "email" that belongs to email field.
- Almost all labels are mixed up :(
Can somebody help my to find a solution for this issue....
Thank you
Regards
Abílio

Hello, we recently also migrated our BCM from 2010 to 2013 with the Business Contact Manager for Outlook 2013 Database Tool and all went also smoothly
except we now have the same problem as Abílio, meaning the fields are mixed up
Examples:
- Field email address, when selected "email 3", label changes to "work", this label belongs to address field.
- Field address, when selected "work", label changes to "email" that belongs to email field.
- Phone numbers: when selected "work", label changes to "Home"
- Almost all labels are mixed up :(
Can somebody please help us get this right again?

Business Contact Manager 2010 connection timeout?

In our company we want to use Microsoft Business Contact Manager. The computers in our local network can connect fine to the shared database, however we also have an user that connects over a VPN connection. This user is getting messages that the database is
not available when trying to access the remote database. Everything else over vpn is working fine.
Personally, I think it has something to do with a to low timeout setting, but I can't seem to change this anywhere for BCM. If I use a sqlcmd (sqlcmd -E -S 192.168.178.29\mssmlbiz,5356) to connect to the database and add a "-l 20" to increase the
timeout time, it works perfectly. But thats just a command, not the actual BCM connecting.
We already tried contacting microsoft for support, but they can't help us, since they do not officially support it. Hopefully somebody here knows a solution to increase the timeout for BCM so we can setup a connection :)
Here is a link to the screenshot of the error message: http://i.stack.imgur.com/2GAid.png

Hi,
You can connect to a Business Contact Manager server by using a VPN connection. However, the performance may not be satisfactory. Microsoft has not tested a configuration in which a user connects to a Business Contact Manager database by using a VPN connection.
Therefore, we do not recommend this configuration.
You can refer to this thread below, which seems to talk about the same problem:
http://social.technet.microsoft.com/Forums/office/en-US/fbc8e91b-93bc-4c49-888f-7785b2a2680a/bcm-2010-cannot-find-shared-database-on-sbs-2008-using-the-bcm-tool?forum=outlook
I think catchacold's advice has helped many users, please check that out.
Or just follow this:
1.Open SQL Server Configuration Manager.
2.Expand SQL Server Network Configuration, and then click Protocols for SQLexpress.
3. Double-Click TCP/IP.
4.On the Protocol tab, verify that Enabled is set to Yes.
5. Click the IP Addresses tab, and then verify that IP ALL is configured for TCP port
5356. If the port is set to a value except for
5356, you can either change the port to 5356, or choose to keep the one that is currently set. If you have to use a port except for
5356 in order to avoid a conflict with another program that uses this port, follow the steps in the section "Use a non-standard port or instance name"
6.If it is necessary, change the port to 5356 and stop and restart the Business Contact Manager instance as prompted.
Regards,
Melon Chen
TechNet Community Support

How could I install outlook with business contact manager 2007 in windows 8.1 system?

Recently I got a new 8 win pc, then I tried to instal Outlook with business contact manager 2007 but I couldn´t
The reason: sql server is not compatible. Would you please let me know how to fix that problem?

Hi CarlosZC,
Since the issue regards Outlook with business contact manager 2007. I suggestion you post the question in the Outlook forums at
http://answers.microsoft.com/en-us/office/forum/outlook?tab=question&status=all&auth=1. It is appropriate and more experts will assist you.
According to your description, we need to verify the version of the SQL Server, usually the warning of compatibility issues applies to all SQL Server Express editions when installing Business Contact Manager (BCM) 2007 on Windows 7/8. The incompatibility
was fixed in SQL Server 2008 Service Pack1 and SQL Server 2005 Service Pack 3 on Windows 7.
There is a similar issue about compatibility message when installing BCM 2007 on Windows 7, you can review the following article.
http://blogs.msdn.com/b/rathomas/archive/2009/10/09/compatibility-message-when-installing-bcm-2007-on-windows-7.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Business Contact Manager 2013 Issue with drop down menus not working correctly and BCM disappearing.

We upgraded from BCM 2007 to BCM 2013. Now the BCM disappears from Outlook occasionally and the drop down menus are confused. for instance when accessing the drop down for phone numbers, the user selects company - but the field for TTY/TDD comes up.
Shows fields that don't exist etc.
The client is using Office 2013 Pro Premium from Office 365 Small Business Premium subscription and BCM downloaded from Microsoft website.
Please let me know what the support avenues are for this product.
Chris Smith

Hi,
This issue may be caused since the BCM was not installed properly.
Please go to Control Panel -> Programs and Features, find Business Contact Manager for Microsoft Outlook and Uninstall it.
Then go to
http://www.microsoft.com/en-us/download/details.aspx?id=36513, download the right version of BCM(32bit or 64bit) and install it.
If issue persists, you may provide the screenshots of the issue, post them to SkyDrive and share it via a link:https://skydrive.live.com/, then we will have a better understanding on the issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How to sync BB and Microsoft Outlook 2007 and Business Contact Manager using Microsoft Exchange

Is a third party application needed to sync BB with Business Contact Manager? How is this done?
Thank you for your help and consideration.
Louie

Hi, and welcome to the forums!
See if this link if pertinent:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB03090&sliceId=SAL_Pub...
If you need more information, please ask!
If not, please resolve the thread. Just place the check in the post that
answered your questions.
Thanks.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Business Contact Manager issue with New Users

I have an issue with a client when setting up Business Contact Manager for Outlook 2013. The client recently got a new employee and the employee was setup on an existing workstation that has BCM installed. When I launched Outlook 2013, and configured Oultook for
the new user, BCM started and needed to be configured. I went through the procedure for connecting to a 'Remote Database' on the server, typed in the server name as requested, and clicked Continue. BCM searched for the database but could not find it. The existing
user account on the workstation works just fine with BCM, and sees the remote database.
My next step was to remove BCM and re-install. This is the latest version/release of BCM for Outlook 2013. The existing user account was able to configure BCM with no issues, and found the remote database without an issue. The new user account had the same
issue as before and would not find the remote database.
I logged onto the same workstation as the administrator account we use to perform Admin tasks. I launched Outlook, configured Outlook 2013, and was able to successfully configure BCM and connect to the remote database with no issues.
I then created another New User on the server called Testaccount (TAccount), and logged onto the same workstation again, as this new user, and went through the same Outlook 2013 configuration and BCM setup. BCM has the same issue with this new user, and
cannot locate the remote database. From what I can determine, this looks to be something related to New Users that are created on the server and BCM not locating the remote database. Existing users do not have this issue when configuring BCM and connecting
to the remote database.
Has anyone had this issue or seen this issue and knows of a fix to correct this so my client can use BCM with the new user account, and any future new users they hire?
Thank you in advance for any assistance on this matter.

If you want to sync subfolders then you will need third party software. (Like Pocket Mirror)
Post relates to: None

How do I sync with Outlook 2010 business contact manager

My Iphone will default to "contacts" in Outlook 2010.
All my contacts are in "Business Contact Manager", not "contacts".
How do I change to sync with BCM ?

You will need a 3 party software for that, something like this:
http://www.companionlink.com/iphone/outlook/

How to refresh Business Contact Manager Business Contacts with BCM database without reload outlook 2010

I am currently working on CRM project. For that I am synchronizing CRM contacts with Outlook Business Contacts. When I modify or add any customer in CRM system. I need to add that customer also in Business Contacts. For this purpose, I use sql triggers
and synchronize BCM database and CRM database. That is working fine. But that BCM DB modification is not showing in outlook business contacts screen. It is displaying old value. If I close and open(reload) outlook, Details displaying correctly. Please let
me know, How to solve this problem?. Thanks in advance

Thanks for your reply.
Please let me know, what do you meant by change the current folder.
1. After doing DB changes, I open different folder,then again load business contacts folder and open business contact, but still record is not displaying correctly.
2. I close and re- open the business contact item in outlook.But that time also not displaying correct value.When I close and re-open outlook, then only correct record is displaying in outlook.
I am using shared BCM database in outlook.
Thanks in advance

How to manage a data file using Business Contact Manager database tool

I set up BCM on my desktop and now want to share with the rest of the office. I downloaded BCM database tool on the C drive
of the server and all was well until I tried to move through the wizard. The only option that gets me to a data file is creating a database. However, I receive the error message "Cannot create a new database. The operation has been rolled back. Please
make sure the database service is running". How can I make this work? Truthfully, I don't want to create a new database - I have already set one up; Restore only gives me the database server instance but no choices for the database name list. I have installed
BCM on another co-workers desktop and allowed the database to be shared with her. What more am I missing? Why can't I get the server to see the data file?

Hi,
If the Database has not been shared, you can't connect to it.
Please also confirm you have been granted permission to access the shared Business Contact Manager database.
You can refer to this article below and there are some factors that you should consider:
Business Contact Manager cannot connect to the shared database
http://office.microsoft.com/en-us/outlook-help/business-contact-manager-cannot-connect-to-the-shared-database-HA010262548.aspx
I hope it can be helpful.
Regards,
Melon Chen
TechNet Community Support

Migrate Business Contact Manager to Office365

Hi, I've today been told by presales at Microsoft that Business Contact Manager BCM is available to download and will work with the MS Office365 O365 Business Premium Plan.
We're about to migrate a client currently on MS Office 2007 and heavily using BCM and also shared mailboxes to MS Office365.
What is the migration path for their BCM data? What is the preferred way to migrate their shared mailboxes?
Thanks
( the link to download BCM seems to be http://www.microsoft.com/en-in/download/details.aspx?id=36513)

For mailbox migration to Office 365, the right place is Office 365 forum:
http://community.office365.com/en-us/f/default.aspx
If you have a Business Contact Manager database that was created with an earlier version of the Database Tool, you can use the Business Contact Manager for Outlook 2013 Database Tool to migrate the database so that it will be compatible with Business Contact
Manager for Outlook 2013. For example, if you created a database in Business Contact Manager for Outlook 2010, you can use the Business Contact Manager for Outlook 2013 Database Tool to migrate that database.
Open
the Database Tool.
Click the Migrate a database option, and then click Next.
In the Database Server Instance list, select the SQL Server instance to which you want to migrate your database, and then click
Next.
In the Database Name list, click the name of the database that you want to migrate, and then click
Next.
When the Task completed successfully message appears, click
Next.
Click Finish if you want to return to the Welcome page of the wizard to complete other tasks, otherwise click the
Close button.
(Manage
your Business Contact Manager database on a server)
-Jeff

CCME integration with Microsoft Business Contact Manager

Similar Messages

Maybe you are looking for