CCP Causes Web Links to Fail

I get some pretty bizzare behavior when I run CCP.
First, everything seems to work OK. I have it set up to run in compatibility mode in IE 10. I also use admin privileges to launch it. It seems to push things out fine. So far, it doesn't hang or anything.
The problems are...
While it's running, web links from other web pages and/or applications no longer function. That inculdes using the included help FAQs on the bottom of some pages, as well as links in emails received in Outlook 2013. Now the really weird part: Once I quit CCP, all those links seem to have been buffered and attempt to connect right away. (When I clicked on links multiple times -- not knowing why they weren't working -- after I quit CCP I got multiple browser tabs opened.)
CCP seems to remove the "terminal length" when I later telnet to the box. Before running CCP: sh run pauses every so many lines; after starting CCP, neither sh run nor any other output pauses. I have to issue the terminal length 24 (or whatever) command to get it to pause again.
Anybody else experience weird things like this when using CCP?
UPDATE: I had been using CCP with the unsecure settings. When I went in using secure settings both of these problems disappeared. I'll leave the discussion up so that perhaps anyone else with a similar problem will know that it's an anomaly, but not unheard of...
Regards,
jeremyNLSO
CCNA Routing & Switching, CCNA Security
MCITP, MCTS
Berlin, Germany
Message was edited by: Noel Stanford Oveson

This appears to be a bug with the tracking in the CWGraph control. I have submitted your example program to the R&D department. They should evaluate this issue for the next release of Measurement Studio. Unfortunately, there does not seem to be a decent work around other than not providing the option to select the Zoom function from the context menu. I tried to specifically set the focus to the CWGraph control because I thought it may have been an issue with the focus, however this did not seem to resolve the issue.
I appreciate you bringing this issue forward and explaining it clearly with an example.
Regards,
Tyler T

Similar Messages

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings!

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings! Works fine with an older Safari Version. Web link, call doodle app. You could see the website in the backround working but safari crashes after clicking on the error window. Any suggestions?

Turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

How Can I Disable "Live" Web Links in a PDF

I have a pdf which is assembled from a variety of original documents, including one document that has a dozen or so "live" url links to websites. I didn't create the document in question, and I don't have access to the original word processing file.
I need to upload the whole document to a website that will not accept pdfs with live links. (It's a filing in a legal action, and the website is operated by a court.) The website support people have told me to remove or disable the links.
This ought to be easy, but I can't figure it out. I can't edit the source document to deactivate the links, (i) becasue I don't have it, and (ii) because it's a part of the record that shouldn't be modified without some form of formal process.
I tried scanning the pages with the links, with the thought that I would replace the original pages with scanned pages. But the court requires text searchable documents, and the OCR process identified the links as urls and created live links.
If there's a basic setting that turns deactivates web links in the text, I haven't found it.
Grateful for all suggestions.
Tom

Thanks for the thought, but the document in question has already been reviewed by the technical department of the court's website help desk. They have identified the website addresses in the text as the reason why their system won't accept it and directed me to remove them. They refer to the addresses as "hyperlinks," which led me to believe that there was a separate link object involved.
However, from what I've learned here tonight, the problem is Acrobat's default behavior in parsing a text string that begins with "http:"
There are a number of ways to handle the problem, all of which involve a little bit of busy work, but it's not a big deal.
It's just it would have been easier if there were some preference I could enable before re-saving the document that did the trick. Now that I think about it, a programmer could probably create an external routine (I assume such things exist for pdf files?) that would "mask" the http string from the parsing engine, or otherwise instruct the application not to generate a live link. But such a routine itself would probably be rejected as as "code which may cause an external action," and there's probably no way to distinguish "good" external routines from malware.
Cheers,
Tom

Web Application services failing to start (Foundation SS, Hyperion Admin)

Hello,
Hyperion Essbase 11.1.1.3
In my installation recently my web applications are failing to start properly. I'm following the start order and allowing services time to come up, but they are still reporting an error.
1. OpenLDAP starts fine, and quickly.
2. Hyperion Foundation Shared Services - Web Application will not start. It fails each time (as does Hyperion Administration Services - Web Application) with the same error message in the logs (see below).
Nothing has changed on these servers in a long time. Any ideas?
Thanks!
startServer.log:
************ Start Display Current Environment ************
Host Operating System is Windows Server 2003, version 5.2 build 3790 Service Pack 2
Java version = J2RE 1.5.0 IBM J9 2.3 Windows Server 2003 x86-32 j9vmwi3223ifx-20090225 (JIT enabled)
J9VM - 20090224_30451_lHdSMr
JIT - 20081112_1511ifx1_r8
GC - 200811_07, Java Compiler = j9jit23, Java VM name = IBM J9 VM
was.install.root = D:\IBM\WebSphere\AppServer
user.install.root = D:\Web\HEA\deployments\WebSphere6/profile
Java Home = D:\IBM\WebSphere\AppServer\java\jre
ws.ext.dirs = D:\IBM\WebSphere\AppServer\java\lib;D:\IBM\WebSphere\AppServer\classes;D:\IBM\WebSphere\AppServer\lib;D:\IBM\WebSphere\AppServer\installedChannels;D:\IBM\WebSphere\AppServer\lib\ext;D:\IBM\WebSphere\AppServer\web\help;D:\IBM\WebSphere\AppServer\deploytool\itp\plugins\com.ibm.etools.ejbdeploy\runtime
Classpath = D:\Web\HEA\common\config\9.5.0.0\lib\hit-config.jar;D:\Web\HEA\common\config\9.5.0.0\lib\hit-common.jar;D:\IBM\WebSphere\AppServer\profiles\AppSrv01\properties;D:\IBM\WebSphere\AppServer\properties;D:\IBM\WebSphere\AppServer\lib\startup.jar;D:\IBM\WebSphere\AppServer\lib\bootstrap.jar;D:\IBM\WebSphere\AppServer/lib/j2ee.jar;D:\IBM\WebSphere\AppServer/lib/lmproxy.jar;D:\IBM\WebSphere\AppServer/lib/urlprotocols.jar;D:\IBM\WebSphere\AppServer\java\lib\tools.jar;D:\Web\HEA\products\Foundation\server\conf;D:\Web\HEA\deployments\WebSphere6\SharedServices9\config;D:\Web\HEA\common\JakartaCommons\commons-pool-1.3.jar;D:\Web\HEA\common\JDBC\DataDirect\3.7\lib\hyjdbc.jar;D:\Web\HEA\common\JakartaCommons\commons-dbcp-1.2.1.jar;D:\Web\HEA\deployments\WebSphere6\SharedServices9\config/lib;D:\Web\HEA\common\JDBC\DataDirect\3.7\lib;D:\Web\HEA\common\SAP\lib;D:\Web\HEA\common\config\9.5.0.0\lib\hit-config.jar;D:\Web\HEA\common\config\9.5.0.0\lib\hit-common.jar;
Java Library path = D:\IBM\WebSphere\AppServer\java\jre\bin;.;D:\IBM\WebSphere\AppServer\java\jre\bin;D:\Web\HEA\common\SAP\bin;D:\Web\HEA\common\CSS\9.5.0.0\bin;D:\Web\HEA\common\CSS\9.5.0.0\bin;D:\Web\HEA\products\Essbase\EssbaseClient\bin;D:\Web\HEA\products\Essbase\EssbaseClient;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Web\HEA\common\ODBC-64\Merant\5.2\Drivers;D:\Web\HEA\products\Essbase\eas\console\bin;D:\Web\HEA\products\Essbase\eas\server\bin;C:\Program Files (x86)\Windows Imaging\;d:\PROGRA~1\BMCSOF~1\Patrol3\bin;D:\IBM\WebSphere\AppServer\bin;D:\IBM\WebSphere\AppServer\java\bin;D:\IBM\WebSphere\AppServer\java\jre\bin;D:\Web\HEA\common\config\9.5.0.0;D:\Web\HEA\products\Essbase\EssbaseClient\bin;D:\Web\HEA\products\Essbase\EssbaseClient;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Web\HEA\common\ODBC-64\Merant\5.2\Drivers;D:\Web\HEA\products\Essbase\eas\console\bin;D:\Web\HEA\products\Essbase\eas\server\bin;D:\Web\HEA\common\CSS\9.5.0.0\bin;D:\Web\HEA\products\Essbase\EssbaseClient\bin;D:\Web\HEA\products\Essbase\EssbaseClient;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Web\HEA\common\ODBC-64\Merant\5.2\Drivers;D:\Web\HEA\products\Essbase\eas\console\bin;D:\Web\HEA\products\Essbase\eas\server\bin;C:\Program Files (x86)\Windows Imaging\;d:\PROGRA~1\BMCSOF~1\Patrol3\bin
Current trace specification = *=info:com.ibm.*=all
************* End Display Current Environment *************
[2/20/13 9:45:00:032 EST] 0000000a ManagerAdmin I TRAS0017I: The startup trace state is *=info:com.ibm.*=all.
[2/20/13 9:45:00:048 EST] 0000000a WsServerContr 1 Executing executeUtilityOnWindows with args: D:\Web\HEA\deployments\WebSphere6\profile\config\ hyslCell hyslNode SharedServices9
[2/20/13 9:45:00:048 EST] 0000000a WsServerContr 1 Getting WindowsService obj with: SharedServices9 and D:\Web\HEA\deployments\WebSphere6\profile\config\ hyslCell hyslNode SharedServices9
[2/20/13 9:45:00:048 EST] 0000000a WindowsServic > getWindowsServiceNameForServer() Entry
[2/20/13 9:45:00:048 EST] 0000000a WindowsServic 1 In executeCommand, args are: D:\IBM\WebSphere\AppServer\bin\WASService.exe -getServiceName SharedServices9 -profilePath D:\Web\HEA\deployments\WebSphere6\profile
[2/20/13 9:45:00:048 EST] 0000000a WindowsServic 1 Runtime.exec() returned process java.lang.ProcessImpl@161a161a
[2/20/13 9:45:00:079 EST] 0000000a WindowsServic 1 retCode from childProcess.waitFor() is 0
[2/20/13 9:45:00:079 EST] 0000000a WindowsServic 3 exitCode = 0
[2/20/13 9:45:01:079 EST] 0000000a WindowsServic 1 Trying to new up WindowsService using serverName=SharedServices9, winServiceName=null
[2/20/13 9:45:01:079 EST] 0000000a ManagerAdmin I TRAS0018I: The trace state has changed. The new trace state is *=info.
[2/20/13 9:45:01:142 EST] 0000000a AdminTool A ADMU0128I: Starting tool with the hyslProfile profile
[2/20/13 9:45:01:142 EST] 0000000a AdminTool A ADMU3100I: Reading configuration for server: SharedServices9
[2/20/13 9:45:04:939 EST] 0000000a AdminTool A ADMU3200I: Server launched. Waiting for initialization status.
[2/20/13 9:45:12:361 EST] 0000000a AdminTool A ADMU3011E: Server launched but failed initialization. startServer.log, SystemOut.log(or job log in zOS) and other log files under D:\Web\HEA\deployments\WebSphere6/profile\logs\SharedServices9 should contain failure information.
SystemErr.log
************ Start Display Current Environment ************
Log file started at: [2/20/13 9:45:09:705 EST]
************* End Display Current Environment *************
[2/20/13 9:45:12:330 EST] 0000000a SystemErr R com.ibm.ws.exception.ConfigurationError: org.xml.sax.SAXParseException: Premature end of file.
[2/20/13 9:45:12:330 EST] 0000000a SystemErr R      at com.ibm.ws.ssl.core.SSLComponentImpl.loadSecurityXMLFromConfig(SSLComponentImpl.java:314)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.ws.ssl.core.SSLComponentImpl.initialize(SSLComponentImpl.java:161)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.ws.runtime.component.ContainerImpl.initializeComponent(ContainerImpl.java:1338)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.ws.runtime.component.ContainerImpl.initializeComponents(ContainerImpl.java:1136)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.ws.runtime.component.ServerImpl.initialize(ServerImpl.java:356)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.ws.runtime.WsServerImpl.bootServerContainer(WsServerImpl.java:178)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.ws.runtime.WsServerImpl.start(WsServerImpl.java:140)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.ws.runtime.WsServerImpl.main(WsServerImpl.java:461)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.ws.runtime.WsServer.main(WsServer.java:59)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at java.lang.reflect.Method.invoke(Method.java:618)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.wsspi.bootstrap.WSLauncher.launchMain(WSLauncher.java:183)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.wsspi.bootstrap.WSLauncher.main(WSLauncher.java:90)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.wsspi.bootstrap.WSLauncher.run(WSLauncher.java:72)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:92)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:68)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at java.lang.reflect.Method.invoke(Method.java:618)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at org.eclipse.core.launcher.Main.run(Main.java:977)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.wsspi.bootstrap.WSPreLauncher.launchEclipse(WSPreLauncher.java:329)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R      at com.ibm.wsspi.bootstrap.WSPreLauncher.main(WSPreLauncher.java:92)
[2/20/13 9:45:12:345 EST] 0000000a SystemErr R Caused by: org.xml.sax.SAXParseException: Premature end of file.
SystemOut.log
************ Start Display Current Environment ************
WebSphere Platform 6.1 [BASE 6.1.0.23 cf230910.10] running with process name hyslCell\hyslNode\SharedServices9 and process id 1528
Detailed IFix information: No IFixes applied to this build
Host Operating System is Windows Server 2003, version 5.2 build 3790 Service Pack 2
Java version = 1.5.0, Java Compiler = j9jit23, Java VM name = IBM J9 VM
was.install.root = D:\IBM\WebSphere\AppServer
user.install.root = D:\Web\HEA\DEPLOY~1\WEBSPH~1\profile
Java Home = D:\IBM\WebSphere\AppServer\java\jre
ws.ext.dirs = D:\IBM\WebSphere\AppServer/java/lib;D:\Web\HEA\DEPLOY~1\WEBSPH~1\profile/classes;D:\IBM\WebSphere\AppServer/classes;D:\IBM\WebSphere\AppServer/lib;D:\IBM\WebSphere\AppServer/installedChannels;D:\IBM\WebSphere\AppServer/lib/ext;D:\IBM\WebSphere\AppServer/web/help;D:\IBM\WebSphere\AppServer/deploytool/itp/plugins/com.ibm.etools.ejbdeploy/runtime
Classpath = D:\Web\HEA\DEPLOY~1\WEBSPH~1\profile/properties;D:\IBM\WebSphere\AppServer/properties;D:\IBM\WebSphere\AppServer/lib/startup.jar;D:\IBM\WebSphere\AppServer/lib/bootstrap.jar;D:\IBM\WebSphere\AppServer/lib/j2ee.jar;D:\IBM\WebSphere\AppServer/lib/lmproxy.jar;D:\IBM\WebSphere\AppServer/lib/urlprotocols.jar;D:\IBM\WebSphere\AppServer/deploytool/itp/batchboot.jar;D:\IBM\WebSphere\AppServer/deploytool/itp/batch2.jar;D:\IBM\WebSphere\AppServer/java/lib/tools.jar;D:\Web\HEA\common\config\9.5.0.0\lib\hit-config.jar;D:\Web\HEA\common\config\9.5.0.0\lib\hit-common.jar;D:\Web\HEA\common\SAP\lib;D:\Web\HEA\deployments\WebSphere6\SharedServices9\config;D:\Web\HEA\common\JDBC\DataDirect\3.7\lib\hyjdbc.jar;D:\Web\HEA\common\JakartaCommons\commons-pool-1.3.jar;D:\Web\HEA\common\JakartaCommons\commons-dbcp-1.2.1.jar
Java Library path = D:\IBM\WebSphere\AppServer\java\jre\bin;.;D:\IBM\WebSphere\AppServer\java\jre\bin;D:\Web\HEA\common\SAP\bin;D:\Web\HEA\common\CSS\9.5.0.0\bin;D:\Web\HEA\common\CSS\9.5.0.0\bin;D:\Web\HEA\products\Essbase\EssbaseClient\bin;D:\Web\HEA\products\Essbase\EssbaseClient;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Web\HEA\common\ODBC-64\Merant\5.2\Drivers;D:\Web\HEA\products\Essbase\eas\console\bin;D:\Web\HEA\products\Essbase\eas\server\bin;C:\Program Files (x86)\Windows Imaging\;d:\PROGRA~1\BMCSOF~1\Patrol3\bin;D:\IBM\WebSphere\AppServer\bin;D:\IBM\WebSphere\AppServer\java\bin;D:\IBM\WebSphere\AppServer\java\jre\bin;D:\Web\HEA\common\config\9.5.0.0;D:\Web\HEA\products\Essbase\EssbaseClient\bin;D:\Web\HEA\products\Essbase\EssbaseClient;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Web\HEA\common\ODBC-64\Merant\5.2\Drivers;D:\Web\HEA\products\Essbase\eas\console\bin;D:\Web\HEA\products\Essbase\eas\server\bin;D:\Web\HEA\common\CSS\9.5.0.0\bin;D:\Web\HEA\products\Essbase\EssbaseClient\bin;D:\Web\HEA\products\Essbase\EssbaseClient;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Web\HEA\common\ODBC-64\Merant\5.2\Drivers;D:\Web\HEA\products\Essbase\eas\console\bin;D:\Web\HEA\products\Essbase\eas\server\bin;C:\Program Files (x86)\Windows Imaging\;d:\PROGRA~1\BMCSOF~1\Patrol3\bin
************* End Display Current Environment *************
[2/20/13 9:45:09:876 EST] 0000000a ManagerAdmin I TRAS0017I: The startup trace state is *=info.
[2/20/13 9:45:10:220 EST] 0000000a ManagerAdmin I TRAS0111I: The message IDs that are in use are deprecated
[2/20/13 9:45:10:361 EST] 0000000a AdminInitiali A ADMN0015I: The administration service is initialized.
[2/20/13 9:45:11:470 EST] 0000000a PluginConfigS I PLGC0057I: The plug-in configuration service started successfully.
[2/20/13 9:45:11:486 EST] 0000000a ManagedObject I Processing extension point com.ibm.wsspi.extension.managed-object-metadata-collector
[2/20/13 9:45:11:595 EST] 0000000a WorkSpaceMana A WKSP0500I: Workspace configuration consistency check is false.
[2/20/13 9:45:11:736 EST] 0000000a SSLComponentI I CWPKI0001I: SSL service is initializing the configuration
[2/20/13 9:45:12:205 EST] 0000000a ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl initialize FFDC0009I: FFDC opened incident stream file D:\Web\HEA\DEPLOY~1\WEBSPH~1\profile\logs\ffdc\SharedServices9_0000000a_13.02.20_09.45.12_0.txt
[2/20/13 9:45:12:267 EST] 0000000a ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl resetIncidentStream FFDC0010I: FFDC closed incident stream file D:\Web\HEA\DEPLOY~1\WEBSPH~1\profile\logs\ffdc\SharedServices9_0000000a_13.02.20_09.45.12_0.txt
[2/20/13 9:45:12:267 EST] 0000000a SSLComponentI E CWPKI0011E: Failed to load security.xml resource from cell. The exception is org.xml.sax.SAXParseException: Premature end of file.

I have had this exact issue and it is caused by a corrupt security.xml file in Websphere. (This was in our System 9 environment)
I navigated to D:\Hyperion\deployments\Websphere6\profile\config\cells\hyslCell
and replaced the old security.xml file with a non 0 kb file from backup and restarted the services and it corrected the issue.
Hope that helps!

Creation of web site 'null' failed

I finally decided to give Azure a try and the first thing I do - creating a simple web site - fails with:
"Creation of web site 'null' failed."
Details say: "Provisioning failed."
I am simply trying to "quick create" a simple website, with no database or anything. Researching the Web, I see other people with the same problem, but no real solution. Some answers on this forum suggest subscribing to the web site service: I believe
I am subscribed...How can I tell? I do have "Web Sites" in the left pane...
Sub. ID: f619f60b-6f9d-460d-a8ef-9e6bdea1e926

David,
Here are some links:
http://social.msdn.microsoft.com/Forums/en-US/a1475637-2f58-43f7-9028-866957926560/azure-website-provisioning-failed
http://social.technet.microsoft.com/Forums/forefront/en-US/b6138a57-07bb-48bb-98bf-9e86dff589fd/creation-of-web-site-failed-provisioning-failed-error-when-creating-a-website-in-azure
http://social.technet.microsoft.com/wiki/contents/articles/13625.windows-azure-web-sites-faq.aspx
Yes, it happens consistently, no matter what I try. Also in different regions.
I am using the 'current' portal.
Andrew

Problem with Adobe 9.5.2 stalling when appending Web Links

Every time I go to append a multi-level web link to a PDF using Adobe Acrobat Pro 9.5.2 it stalls (this problem also occurs on a computer I have with Adobe Acrobat Pro 9.2 installed). I have tried repairing the program, installing updates, and restarting the computer with no luck. This problem only started happening 5 days ago after using the program with no problems for over a year. How can I fix this? Steps to reproduce the problem: 1. Open PDF. 2. Click on Advanced > Web Capture > View Web Links 3. Select desired web link > click "Properties" > chose number of levels or entire site > Press OK 4. Select desired web link again > click on Download Results: Adobe starts to convert the web link for a few seconds and then stalls for hours with no success on a web link that previously only took two minutes to convert a week ago. Sometimes it will crash and I get the message "Adobe Acrobat has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Expected results: To be able to append the multi-level web link to the PDF.

Hi Jamie,
I was able to reproduce this crash. I've logged a bug with our engineering team. When I hear more, I'll update this thread.
I do not have a workaround for this issue at this time.
-David

I have just updated to Firefox v 6.0.2 and can no-longer open web links from Windows Live Mail 2011 (Bld 15.4.3538).

Shutting down programmes and rebooting computer did not help. Launching web links from Live Mail has never been a problem before. Error message reads " There was a problem sending the command to the program"

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.

Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions?

PLS files as web links won't open in ITunes; still say Winamp

Hello. I apologize if this has been answered, but I searched to the best of my ability, and none of the answers I saw applied to this question. They all seem to say that I should set ITunes up as my default Internet music player, but that option doesn't seem to exist any more. I've seen things that tell me to go to preferences -> advanced -> general, but that general tab isn't there any more. I can't find a setting for "internet music player", so I thought I'd ask here. I recently uninstalled Winamp because of various annoyances, knowing that ITunes can do everything it could do and more. However, now, pls links won't play from either IE9 or Firefox. I can download the pls file and play it that way by just double clicking it. I've used the "Default Programs" method recommended for Windows 7 to make ITunes the default player for these files, and it works perfectly until I try to click on a web link. When I save the pls file, the "File Type" combo box to the right of the file name edit box says "Winamp .pls file". I'm guessing that the browsers are checking some other area and are finding Winamp as the pls player, trying to find it, failing, and returning to the web page with no error. How can I fix this? ITunes works perfectly except for web links. I can't tell by trying other files because I have plugins that play all the other files I have found. How do I make ITunes do this?

Hi, Ed2345. I apologize for clicking the "Correct Answer" button accidentally. Firefox already has ITunes listed as the default player for "Winamp playlist files" which are .pls files. I've gone to a few radio stations, some with AAC streams and some with mp3 streams and the results have been the same. ITunes should be starting for these Winamp playlist files, but that's not happening. How can I add the equivalent of a file extension setting in the browser? These seem to be organized by MIME type. Can I add an extension handler, or perhaps is there a MIME type missing? If so, how do I add it in Firefox? I don't see a "New" button.
V/R,
Brad

Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

When I click on a web link to open in a new window - it has double bars, no URL...

When I click on a web link to open in a new window - it has double Browser bars (chrome), no URL. I close that window and do it again it often works correctly.
I have made screen shots and placed at pageaccess.com/FireFox_5-6_issue.pdf

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Web Service execution failed for operation: ReadLogFile

Hello,
im getting the following error message in almost all of my Diagnostic Agent log files:
[MAIJobObserver] ERROR occurred for metric collection
00000000000000000019[com.sap.smd.mai.model.collector.SAPControlWSCollector].
[EXCEPTION]
com.sap.smd.mai.model.collector.CollectorException:
[SAPControlWSCollector.collect] Web Service execution failed for operation:
ReadLogFile. Collector : [SAPControlWSCollector]
Id: 00000000000000000019,
SID: EPX, instance number:00
at
com.sap.smd.mai.model.collector.SAPControlWSCollector.collect(SAPControlWSCollector.java:200)
at
com.sap.smd.mai.job.MetricJobRunner.run(MetricJobRunner.java:25)
at
com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:46)
at
com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785)
at
java.lang.Thread.run(Thread.java:722)
Caused by: java.rmi.RemoteException:
Service call exception; nested exception is:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException:
Invalid Response Code: (401) Unauthorized. The requested URL
was:http://<hostname>:50013/SAPControl.cgi
I checked on SAP note 1563660 - sapcontrol, <sid>adm authorization issues (SUM) and confirmed, that ALL installations of the "sapuxuserchk" program are set with "chown root.sapsys" and "chmod u+s,o-rwx". I restarted the diagnostic Agent aftwards.
I also checked on host_profile an made sure, that the parameter "service/admin_users = daaadm" is set.
Still I get the above error messages, so I am at a loss what else to do...
A lot of thanks for your Support !
Best regards,
Thorsten

Hi Thorsten,
Please check the user used for registration of Diagnostic agent to Solution Manager has appropriate roles assigned (e.g. user SMD_ADMIN)
Also please update to latest patch of SAP Host agent and then try again.
Hope this helps
Thanks & Regards,
Nisha

"Software caused connection abort: recv failed" from Applet in IE to JBoss

Hi
We have an application hosted as applets on our web-site, but offer the
same application to customers as a "standalone" off-line version. This
off-line version is the same code-base, deploy and HTML but run from the
local file system (in the absence of a web-server).
I have a J2EE Jasper Reporting framework running in JBoss. On the off-line
product JBoss runs on the same machine.
The on-line version works perfectly in both IE and FireFox.
The off-line version works perfectly in FireFox, but alas, NOT in IE!
First, here's some code:
private JasperPrint generateReport() {
          Hashtable enva = new Hashtable();
          System.out.println("enva.put(\"java.naming.factory.initial\", \"org.jnp.interfaces.NamingContextFactory\");");
          enva.put("java.naming.factory.initial", "org.jnp.interfaces.NamingContextFactory");
          System.out.println("enva.put(\"java.naming.factory.url.pkgs\", \"org.jboss.naming:org.jnp.interfaces\");");
          enva.put("java.naming.factory.url.pkgs", "org.jboss.naming:org.jnp.interfaces");
          int port = 1099;
          String host = "127.0.0.1";
          System.out.println("enva.put(\"java.naming.provider.url\", \"jnp:// " + host + ":" + port);
          enva.put("java.naming.provider.url", "jnp:// " + host + ":" + port);
          try {
               System.out.println("Context ictx = new InitialContext(enva);");
               Context ictx = new InitialContext(enva);
               System.out.println("Object o = ictx.lookup(\"java:/SessionReport\");");
               Object o = ictx.lookup("java:/SessionReport");
               System.out.println("SessionReportControllerHome home = (SessionReportControllerHome) PortableRemoteObject.narrow(o, SessionReportControllerHome.class);");
               SessionReportControllerHome home = (SessionReportControllerHome) PortableRemoteObject.narrow(o, SessionReportControllerHome.class);
               System.out.println("SessionReportController remote = home.create();");
               SessionReportController remote = home.create();
               PSIberRDSParameterSEIFSAPensionProvidendFund rVO = new PSIberRDSParameterSEIFSAPensionProvidendFund();
               //call the function on remote
               try {
                    JasperPrint jasperPrint = new JasperPrint();
                    JasperVO jasperVO = remote.generateMyJasperReport(rVO);
                    jasperPrint = jasperVO.getJasperPrint();
                    return jasperPrint;
               } catch (Exception re) {
                    System.err.println("remote exception is " + re.getMessage());
          } catch (Exception e) {
               e.printStackTrace();
          return null;
     }This function returns a net.sf.jasperreports.engine.JasperPrint object wich I
feed to the JasperViewer.
Here's the output in my Java console:
enva.put("java.naming.factory.initial", "org.jnp.interfaces.NamingContextFactory");
enva.put("java.naming.factory.url.pkgs", "org.jboss.naming:org.jnp.interfaces");
enva.put("java.naming.provider.url", "jnp:// 127.0.0.1:1099
Context ictx = new InitialContext(enva);
Object o = ictx.lookup("java:/SessionReport");
javax.naming.CommunicationException [Root exception is java.rmi.UnmarshalException: Error unmarshaling return header; nested exception is:
     java.net.SocketException: Software caused connection abort: recv failed]
     at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:707)
     at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:572)
     at javax.naming.InitialContext.lookup(Unknown Source)
     at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.callSEIFSAPensionProvidentFundReport(MessageRouter_PAY.java:15159)
     at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.getPayAppletDataImpl(MessageRouter_PAY.java:14895)
     at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.getAppletDataImpl(MessageRouter_PAY.java:14228)
     at psiber.v2.pp.psiberworks.server.MessageRouter.getAppletData(MessageRouter.java:135)
     at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.getAppletDataImpl(RemoteSessionImpl.java:734)
     at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.access$0(RemoteSessionImpl.java:710)
     at psiber.v2.pp.psiberworks.server.RemoteSessionImpl$1.exec(RemoteSessionImpl.java:668)
     at psiber.v2.pp.psiberworks.server.SynchronizedAccessController.doExecuteQuery(SynchronizedAccessController.java:61)
     at psiber.v2.pp.psiberworks.server.SynchronizedAccessController.executeQuery(SynchronizedAccessController.java:137)
     at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.getAppletData(RemoteSessionImpl.java:690)
     at psiber.v2.pp.psiberworks.client.RemoteSessionProxy.getAppletData(RemoteSessionProxy.java:109)
     at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.getAppletData(PsiberPayReportWizardApplet.java:7094)
     at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.callSEIFSAPensionProvidentFundReport(PsiberPayReportWizardApplet.java:14492)
     at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.processSelectedReport(PsiberPayReportWizardApplet.java:14091)
     at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.onNextButtonPressed(PsiberPayReportWizardApplet.java:13229)
     at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.actionPerformed(PsiberPayReportWizardApplet.java:361)
     at java.awt.Button.processActionEvent(Unknown Source)
     at java.awt.Button.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.rmi.UnmarshalException: Error unmarshaling return header; nested exception is:
     java.net.SocketException: Software caused connection abort: recv failed
     at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
     at sun.rmi.server.UnicastRef.invoke(Unknown Source)
     at org.jnp.server.NamingServer_Stub.lookup(Unknown Source)
     at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:610)
     ... 28 more
Caused by: java.net.SocketException: Software caused connection abort: recv failed
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(Unknown Source)
     at java.io.BufferedInputStream.fill(Unknown Source)
     at java.io.BufferedInputStream.read(Unknown Source)
     at java.io.DataInputStream.readByte(Unknown Source)
     ... 32 more
remote exception is null
You'll see just as the InitialContext.lookup is executed a
javax.naming.CommunicationException is thrown.
I have re-tried changing hostnames, ip addresses etc.
Port 1099 is allowed on Personal Firewall and I even diabled it to be sure.
Like I said, it works fine in FireFox.
I'm running Windows XP Version 5.1 (Build 2600.xpsp_sp2_gdr.050501-1519 : Service Pack 2)
and IE Version 6.0.2900.2180.xpsp_sp2_gdr.050501-1519
and SUN JAVA Version 1.4.2_06 (build 1.4.2_06-b03)
I have tested this on 1.5.0 (build 15.0_02-b09) with the same result.
Please help! F1! F1! F1!
Thanks in advance :D

Hello again
I have discovered more info. I'm not realy enthusiastic about these latests
findings and I realy hope someone can help me figure a work around.
Intermittently I get this stack trace in the java console:
enva.put("java.naming.factory.initial", "org.jnp.interfaces.NamingContextFactory");
enva.put("java.naming.factory.url.pkgs", "org.jboss.naming:org.jnp.interfaces");
enva.put("java.naming.provider.url", "jnp://localhost:1099
Context ictx = new InitialContext(enva);
Object o = ictx.lookup("java:/SessionReport");
javax.naming.CommunicationException [Root exception is java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
     java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
     java.net.MalformedURLException: no protocol: Files/psiberworks/lib/pcl.jar]
     at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:707)
     at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:572)
     at javax.naming.InitialContext.lookup(Unknown Source)
     at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.callSEIFSAPensionProvidentFundReport(MessageRouter_PAY.java:15160)
     at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.getPayAppletDataImpl(MessageRouter_PAY.java:14895)
     at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.getAppletDataImpl(MessageRouter_PAY.java:14228)
     at psiber.v2.pp.psiberworks.server.MessageRouter.getAppletData(MessageRouter.java:135)
     at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.getAppletDataImpl(RemoteSessionImpl.java:734)
     at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.access$0(RemoteSessionImpl.java:710)
     at psiber.v2.pp.psiberworks.server.RemoteSessionImpl$1.exec(RemoteSessionImpl.java:668)
     at psiber.v2.pp.psiberworks.server.SynchronizedAccessController.doExecuteQuery(SynchronizedAccessController.java:61)
     at psiber.v2.pp.psiberworks.server.SynchronizedAccessController.executeQuery(SynchronizedAccessController.java:137)
     at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.getAppletData(RemoteSessionImpl.java:690)
     at psiber.v2.pp.psiberworks.client.RemoteSessionProxy.getAppletData(RemoteSessionProxy.java:109)
     at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.getAppletData(PsiberPayReportWizardApplet.java:7094)
     at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.callSEIFSAPensionProvidentFundReport(PsiberPayReportWizardApplet.java:14492)
     at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.processSelectedReport(PsiberPayReportWizardApplet.java:14091)
     at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.onNextButtonPressed(PsiberPayReportWizardApplet.java:13229)
     at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.actionPerformed(PsiberPayReportWizardApplet.java:361)
     at java.awt.Button.processActionEvent(Unknown Source)
     at java.awt.Button.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
     java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
     java.net.MalformedURLException: no protocol: Files/psiberworks/lib/pcl.jar
     at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:292)
     at sun.rmi.transport.Transport$1.run(Transport.java:148)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
     at java.lang.Thread.run(Thread.java:534)
     at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
     at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
     at sun.rmi.server.UnicastRef.invoke(Unknown Source)
     at org.jnp.server.NamingServer_Stub.lookup(Unknown Source)
     at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:610)
     ... 28 more
Caused by: java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
     java.net.MalformedURLException: no protocol: Files/psiberworks/lib/pcl.jar
     at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:249)
     at sun.rmi.transport.Transport$1.run(Transport.java:148)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.net.MalformedURLException: no protocol: Files/psiberworks/lib/pcl.jar
     at java.net.URL.<init>(URL.java:537)
     at java.net.URL.<init>(URL.java:434)
     at java.net.URL.<init>(URL.java:383)
     at sun.rmi.server.LoaderHandler.pathToURLs(LoaderHandler.java:747)
     at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:147)
     at java.rmi.server.RMIClassLoader$2.loadClass(RMIClassLoader.java:631)
     at org.jboss.system.JBossRMIClassLoader.loadClass(JBossRMIClassLoader.java:79)
     at java.rmi.server.RMIClassLoader.loadClass(RMIClassLoader.java:257)
     at sun.rmi.server.MarshalInputStream.resolveClass(MarshalInputStream.java:200)
     at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1513)
     at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1435)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1626)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:324)
     at javax.naming.CompoundName.readObject(CompoundName.java:554)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:838)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1746)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:324)
     at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:297)
     at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:246)
     ... 6 more
remote exception is null
So why would I get a java.net.MalformedURLException?!?! And why is the
classloader having problems loading on of the referenced jars?!
It's that space in "Program Files"......
So I copied the folder to D:\Temp and.... volla!! the off-line deploy of the
application now works fine in Internet Explorer. It's that space!
So this is my theory, when the initialcontext.lookup is called the classnames specified are reflected, instanciated etc. So when the applet gets the
document base from the browser IE gives it "C:\Program Files\" and not an
encoded "file://C:\Program%20Files\" and the spaces causes the classloader
(or something) to not parse the path correctly and causes a bad URL.
If I type the encoded URL in IE's address bar it finds the HTML, displayes it and changes the address bar contents back to "C:\Program Files".
FireFox doen't do this, and therefore works.
Does anyone know if their is a patch for IE, or if there is another way to
connect to JBoss?
How frustrating!! IE Stuffs up the encoded URLS!!!

Web link in signature's

Is there any way to add a hyper link/web link to signatures?
Cheers, Slowstdy

As regards the problem with inserting a link into a signature, the work around you've suggested might be one answer. However, the Apple mail application seems to promise something more than that.
On the menu bar go to "Mail," then "Preferences," then "Signatures" and then fill in the text box with whatever you want to appear as your signature. If you highlight the part of that text that you want to hyperlink and then click on it a menu will appear. Sixth from the bottom of that pop-up menu is a command labeled "link" which in turn leads to a command labeled "Add."
Unfortunately, that's where the good news ends. That sequence of steps, if done in the message portion of any e-mail, will result in a cool little pop up window that allows you to specify a web address. However, in the "Signatures" text box the "link" command fails to invoke the pop up window. Evidently in this context the feature is not properly implemented.
My guess is that this is an issue Apple will need to address in an upcoming fix.

Web server configuration failed with EPM 11.1.2.2 on Solaris 11

Hi,
When install & configured EPM 11.1.2.2, all components configuration success except web server configurations. In the
/export/epm/Middleware/EPMSystem11R1/diagnostics/logs/
[ERROR][EPMCFG-07236][oracle.EPMCFG][SRC_CLASS: com.hyperion.cis.config.ant.apache2.OHS2configurator]/export/epm/Middleware/user_projects/epmsystem1/httpConfig/ohs/config/OHS/ohs_component/httpd.conf wasn't found. OHS wasnt configured successfully, see oraInventory logs for more details"
The /export/epm has around 1.1T free disk space, and it had been set WRX permission for the 'epm' user. Please advise what might cause the above issue?
Thanks,
Jenny

Hi,
The OHS installation was showed as "Complete" in the EPM installation. Yes, there was "/export/epm/Middleware/user_projects/epmsystem1/httpConfig" directory.
Under "/export/epm/oraInventory/logs", it generated 4 files as "intsall*.log", "install*.out", "installActions*.log", and
"installProfile*.log" when I'm trying to configure the web server again with cfgtool. The logs are pretty long, and I'm not sure if the bellow messages indicate space problem or not in the "install*.log"?
[oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.genericQueries.getFreeSpaceForHome] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] errorString:
[2013-07-09T13:00:36.230-08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.genericQueries.getFreeSpaceForHome] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] Exiting method executeHandler
[2013-07-09T13:00:36.231-08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] Handler launch end: genericQueries.getFreeSpaceForHome
[2013-07-09T13:00:36.231-08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] Handler returned status: SUCCES
The "install*.out" had the error message as:
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (ohsInstance3355595679)]:Skipping instance registration
ld.so.1: opmn: fatal: libcolntsh.sop.11.m1: open failed: No such filnctl startall: estarting opmn and all moracle.as.config.ProvisionException: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:153)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createStandaloneASInstance(CreateASInstance.java:84)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureInstanceStandalone(WebtierConfigurationAction.java:590)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:441)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:174)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.startOpmn(CreateASInstance.java:228)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:151)
... 13 more
a or directornage[CONFIG] FAILED:Create and Start AS Instance (ohsInstance3355595679)
y
d processes[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (ohsInstance3355595679)]:Unable to start opmn
.[CONFIG] FAILED:Create and Start AS Instance (ohsInstance3355595679)
..Question Received:Unable to start opmn
[CONFIG] [Web Tier Configuration]:Unable to start opmn
oracle.as.config.ProvisionException: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:153)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createStandaloneASInstance(CreateASInstance.java:84)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureInstanceStandalone(WebtierConfigurationAction.java:590)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:441)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:174)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.startOpmn(CreateASInstance.java:228)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:151)
... 13 more
opmnctgetting all the checkpoint properties..
l startall: failed.m_checkpointData:{}
Configuration:Web Tier Configuration failed
Error while running Configuration.
The configuration of Oracle WebTier and Utilities CD failed.
outputFile:/export/epm/oraInventory/logs/installProfile2013-07-09_02-00-32PM.log
The "install*Profile*.log" reported:
Processor Architecture : sparcv9
#The cycle speed of the CPU
CPU Speed : 0.0 GHz
#This is the number of CPUs available to the installer's JVM
CPU Number : 512 Processors.
#Available Swap space on this machine when installer started
Available Swap Space : 0 MB.
Somehow, it report the cpu speed as 0hz, and swap space also 0MB, but I have lots of swap space available(630G) shown from 'df -h' and 'swap -s'
Thanks!

CCP Causes Web Links to Fail

Similar Messages

Maybe you are looking for