CDATA in the soap receiver adapter ?

Hi Guys,
I am passing the whole xml into a string on the target side, i did java mapping and on the receiver side system the CDATA is not recognised. Is there any way i can eliminate this cdata ?
<?xml version="1.0" encoding="utf-8" ?>
- <soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
- <soap:Body>
- <C_XML xmlns="http://bradtest.velsol.com/">
- <sXML>
- <![CDATA[ "<?xml version="1.0" encoding="UTF-8" ?><DEBMAS02><IDOC BEGIN="1"><EDI_DC40 EGMENT="1>00000000</DBMON></E1KNKKM></E1KNA1M></IDOC></DEBMAS02>"
]]>
</sXML>
</C_XML>
</soap:Body>
</soap:Envelope>
any help would be appreciated, how to eliminate the CDATA
Thanks,
Raj
Message was edited by:
raj reddy

Hi
The deleteData() method deletes data from a CDATA node.
Syntax
CDATANode.deleteData(start,length)
Please try following code
xmlDoc=loadXMLDoc("books_cdata.xml");
var x=xmlDoc.getElementsByTagName("html")[0].childNodes[0];
x.deleteData(0,3);
document.write(x.data);
For more help go through following link
http://www.w3schools.com/dom/met_cdata_deletedata.asp
Thanks
Abhishek Mahajan
***Please Reward points if find helpful****

Similar Messages

No Payload in the soap receiver call adapter ?

Hi Guys,
configured Proxy-SOAP Asynchronus process and in the sxmb_moni, i am unable to see the payload under call adapter in sxmb_moni, but i am able to see the payload under RWB in MDT. The message is checked successful in monitor.
I am not understanding why i am unable to see the payload under call adapter in sxmb_moni. I am not getting the data into my receiver system.
Do i need to mention the QOS as EO in the soap url in the soap receiver adapter configuration ?
any help would be really appreciated
Thanks,
srini

Hi,
You can only see the Payload(both with and without transformation) in MONI. message that is handling by adapter can only seen in Adapter Framework using RWB-Message Monitoring or using Communication Channel Monitoring.
Regards,
Farooq.

Rewards points if you find it usefull.

Usage of Module processor in SOAP Receiver Adapter

Hi,
I have scenario where I am calling an external Web Service via XI. Unfortunately I need Java Mapping to generate the complete SOAP Message (there are some special header elements required by the Web Service) and flag 'no soap' in the SOAP Receiver Adapter. This works fine, but I have additional Web Service Calls that have the same Header logic and I don't want to use Java Mapping all the time.
I was wondering if it is possible to use graphical User Mapping for the Business Data that goes to the SAOP Body as a payload and use Java code to generate the SOAP Message (actually the SOAP Wrapper and the Header).
Can I do this in XI using the Module processor in the SOAP Receiver adapter or do I have to use two mappigs, one based on the Graphical mapping and another using Java Mapping? Is it feasible at all in XI?
Thanks in advance.

Hi,
You can use Module Processor.
But,
1. If it is a synch call, in when the message is going from the SOAP adapter to the Webservice, you will need to manually Add the SOAP header as you want . ( you will need to create the entire SOAP mesage as the output of the Module ).
2. When the response comes back, the same module will need to remove the SOAP header etc and pass a valid , XML message to the Graphical mapping.
If you have a requirement that some fields of the SOAP header will be needed to be accesed in the Response mapping, then you would need to either add this field to some field in the response payload.
Better option would be to use, Either a Java or a XSL mapping that does all the required stuff for you.
Regards
Bhavesh

SOAP Receiver adapter with attachments not working

Hello,
I have a simple synchronous scenario like this; ABAP proxy with attachments to SOAP with attachments.
The SOAP receiver adapter has been configured with the parameters 'Do not Use SOAP envelope' and 'Keep attachments'. We create our own SOAP envelope with custom SOAP headers, so that's the reason for the 'Do not use SOAP envelope' setting.
When we test the scenario with an attachment then we get a timeout from PI. However, when we test the same scenario without any attachment then no errors occur.
The external webservice has also been tested with SOAP UI and it works fine.
Do you have any clues what the problem can be? What are we still missing in the configuration?
We did try with the adapter modules such as PayloadSwapBean and the Message TransformBean, so far without success...
Many thanks.
Roberto

Hi Stefan,
The attachments are not really big, around 150KB.
According to the other party (Oracle Service Bus) no messages with attachments have been received. In fact it seems like those messages never leave the PI server. SOAP requests without attachments are processed successfully.
Thanks
Roberto

SOAP Receiver Adapter - Read Header data on Synchronous Response

I have a scenario - flat file to SOAP. The web service provider sends a response that contains data in the Header that I need to access. I have tried to use the "Do Not Use SOAP envelope" option on my receiver SOAP adapter, and I have configured my request message type to include the soap envelope elements. However I'm getting the following error from the web service
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Cannot process the message because the content type 'application/xml' was not the expected type 'text/xml; charset=utf-8'.
I've read some inputs on this error that say to use the Transform bean to adjust the content to text/xml. However I'm not sure how to do that. If that is the correct resolution to my problem, can someone provide detailed steps on how to add the Transform bean to the adapter module. I have no experience with adding items to the module tab.
If there are other ways to tackle this scenario to get access to the SOAP Header from the SOAP receiver adapter, please share those as well.
Thanks in advance.
Chris

Resolved with the following blog
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi

No SOAP Envelope error in SOAP Receiver Adapter

Hello Friends,
Informaiton:-
I have configured one Synchronous scenarion for SAP R/3 to PI 7.1 to Java based web applicaiton.
On the Receiver/Outbound side, i have configured the SOAP Receiver Adapter with the Target URL and SOAP Action.
Outbound and Inbound service interfaces have Request/Response and Fault messages.
Issue:-
While sending the Message, Below error is noticed in ABAP stack SXMB_MONI during the Call Adapter Stage and also in RWB (Channel Monitoring) .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 {}RESPONSES; HTTP 200 OK
I also found that Request message is not reaching to the Java Web server.
I am taking the Same message Payload (found at Call Adapter Stage) and ussing it in XML Altova SPY Web client tool. There it is running scuccessfully and getting the Response message.
please suggest.
Thanks & Regards
Jagesh

Hi,
Yesterday i consumed the same WSDL file in Altova XML SPY and there it is working, getting the Response.
Now comparing the SOAP Request message reaching to the Third party Web server (which fall within the same Lane network)
from SAP PI and Altova XML SPY tool. I used TCP Gateway for the below scenarios.
(1)First i sent the SOAP message from PI and observed the RESPONSE message without the SOAP Envelope in TCP Gatway Trace and hence i am getting the No SOAP Envelope Error in PI.
(2)I consumed the same WSDLfile in Altova XML SPY and sent the SOAP message, here i got the Proper SOAP Response message and hence success in this case. (Used the same Data Payload as used in point 1)
(3)Now to identify the issue in the SOAP Request message being sent from PI, i used the same SOAP message sent in step 1 here, that means copy the entire SOAP ENvelope from the TCP gateway Trace and pasted it in Alota Spy and sent, there it is found running (got the response message from Third Party server).
One difference i found in HTTP Protocol statements in SOAP Request message in Point no 1 and Point no 2 above.
HTTP Protocols in Point 1 (Through PI).
POST HTTP/1.0
Accept: /
Host: 172.24.138.142:4544
User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
CallingType: SA
content-id: <soap-00306EEAC2051ED1839136CEE8564900 sap.com>
Content-Type: text/xml; charset=utf-8
Content-Length: 1195
SOAPACTION: "Action1"
HTTP Protocols in Point 2 (Through Altova).
POST / HTTP/1.1
Content-Type: text/xml
User-Agent: XML Spy
SOAPAction: "Action1"
Host: 172.24.138.142:4544
Content-Length: 1195
Connection: Keep-Alive
Cache-Control: no-cache
Thanks to Mr. Stefan Grube for writting such a nice blog.
Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway
Experts, please suggest me further.
Thansk & Regards
Jagesh

HTTPS config in SOAP receiver adapter ?

Hi Guys,
I have configured the soap receiver adapter with the URL
*https://xxxx.abcd.com/xyzv/bbbb.asmx with the user authentication *
I have tested the url and the user and pw in the browser and they are working fine but the messages are failing the soap receiver adapter with the 401 unautorized error as the message from the Audit log in the RWB.
Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized. Setting message to status failed.
Do i need to configure the Java Stack for HTTPS ? The communicaion is between the XI system and a third part system internally.
any help would be appreciated ?
Thanks,
Srini

Hi Guys,
I have solved the problem and NTLM works with PI 7.0 but we need to configure soap axis adapter
The Windows NTLM authentication is supported by Axis's CommonsHTTPSender handler and consequently it is supported by the Axis adapter's corresponding handler com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender. Read about How Can I use CommonsHTTPSender as the transport handler? if CommonsHTTPSender is not enabled on your system. Once it is enabled, you can use com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender instead of default com.sap.aii.adapter.axis.ra.transport.http.HTTPSender as the transport handler in the module configuration and set the authentication setting to NTLM and enter usename as domain\username in the channel configuration
To use CommonsHTTPHandler, the optional Jakarta-Commons-Net, Jakarta-Commons-HttpClient, Jakarta-Commons-Codec libraries are required. Make sure that these libraries are available for the Axis adapter at the deployment check page If these components are not available, you will need to include the corresponding jar files (commons-codec-1.3.jar, commons-httpclient-3.0.jar, and commons-net-1.0.0-dev.jar from the Axis 1.4 release) in aii_af_axisprovider.sda and deploy this archive (see How to prepare aii_af_axisprovider.sda?).
The provider.xml file must include the jar-name entries for these jar files, as shown in:
 <jars>
 <jar-name>commons-net-1.0.0-dev.jar</jar-name>
 <jar-name>commons-codec-1.3.jar</jar-name>
 <jar-name>commons-httpclient-3.0.jar</jar-name>
 </jars>
Once you do all the above settings, NTLM works fine
Thanks,
Srini

Payload at Adapter for System Errors - SOAP receiver adapter

Hi Everybody,
I am working on an Idoc to SOAP asynchronous scenario.
There are connection issues between SOAP adaper and the target webservice.
I need to capture the Idoc number from the message payload for the Erroneous messages at the adapter for the System errors.
Is there any way of capturing field values from the payload (Say, Idoc number) at the SOAP receiver Adapter level.
Helpful answers will be rewarded points.
Thanks & Regards,
Zabiulla

Hey,
I think you need to implement a module inorder to get the payload at receiver adapter module.
As far i concern you can not directly refer the payload in adapter in receiveer communication channel unless you have your own module, which gets the payload. Check the Modules tab in the communication channel and also regarding how to get the payload for error information, follow the steps mentioned in the below link, which gets the payload in file. hop it will resolve your issue.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/writepayloadtoafilefromAdapter+Module
Regards..
Prasanna..

SOAP receiver adapter for ASCII-7 characterset???

Hi,
Our scenario is Abap Proxy -> XI -> Web Services (SOAP Adapter). Receiver webservice will accept only the characterset of ASCII-7. But Abap Proxy will send only unicode characterset (default).
Any workaround for receiver SOAP adapter to accept ASCII-7 characterset?
Regards,
Prasad U

Hi -
You can set a specific encoding in the soap receiver channel module configuration. From the SOAP Adapter FAQ (Note 856597):
 o Q: What character encoding is supported by the SOAP receiver
 adapter?
 A: The SOAP receiver adapter can use any character encoding
 supported by the local JDK. The request message from the SOAP
 receiver is normally encoded in UTF-8. If you want to change this
 encoding, for instance to iso-8859-1, you can set parameter
 XMBWS.XMLEncoding to iso-8859-1 in the module configuration for
 the SOAP adapter module. This setting is for the outgoing SOAP
 message and has no effect on the incoming SOAP message. For the
 incoming SOAP message, any code page supported by the local JDK
 is accepted.
Check the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79">How to Use the XI 3.0 SOAP Adapter</a> document for an example.
Regards,
Jin

Enable communication HTTPS in SOAP Receiver Adapter

Hi gurus,
I have configured the soap receiver adapter with the URL:
"https://www.xxxx.com/yyyyyyyyyy.asmx" without the user authentication.
I have executed the webservice since SOAP-UI and works well. But if I run the webservice from SAP XI does not work. In the transaction SXMB_MONI shows the following error:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection closed by remote host.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>"
What is happening?
Thanks,
Jose.

Jose,
client certificate is the "top" authentication mechanism during SSL handshake, like this :
- XI authenticate the SSL certificate (server) issued by target server against a (trusted) list of known certification authority, then target will ask XI to present its own certificate (client) and it will make sure this client certificate can be trusted (verifying it has been certified by a known authority). Handshake is "done"
but you can also have
- "anonymous" mode (XI will make sure SSL cert provided by the target has been issued - and so can be trusted - by a (well)known certification authority), that's it. Target does not expected any other security feature
- user/pwd over a SSL connection (like above, but you'll also have to provide a user and pwd for authentication at target level)
Hope this helps
Chris

CDATA element deleted in SOAP receiver adapter

Hello Everybody!
I've got a problem with SOAP receiver adapter. I've made a mapping for synchronous HTTP -> XI -> SOAP interface, in which the request mapping is java mapping, which produce a message like this:
<?xml version="1.0" encoding="UTF-8"?> <ns0:SaveISDocument xmlns:ns0="http://pl.optix.pl/aews">
<ns0:xmlDocument><IMAGES><IMAGE FileName="tmp.xml" ClassName="IVX">
<![CDATA[PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iaXNvLTg4NTktMiI/Pgo8SU5WT0lDMDECiAgPElET0MCiAgICAgPEVESV9EQzQwPgogICAgICA8VEFCTkFNPkVESV9EQzQwPC9UQUJOQU0CiAgICAgIDxNQU5EVD4zMDwvTUFORFQCiAgICAgIDxET0NOVU0OTAzMTAyMzA4MzwvRE9DTlVNPgogICAgICA8RE9DUkVMPjQ1QjwvRE9DUkVMPgogICAgICA8U1RBVFVTPjMwPC9TVEFUVVMCiAgICAgIDxESVJFQ1QMTwvRElSRUNUPgogICAgICA8T1VUTU9EPjI8L09VVE1PRD4KICAgICAgPElET0NUWVASU5WT0lDMDE8L0lET0NUWVACiAgICAgIDxDSU1UWVAWjFJTlYwMTwvQ0lNVFlQPgogICAgICA8TUVTVFlQPklOVk9JQzwvOVk9JQzAxPgo=]]>
</IMAGE></IMAGES>
</ns0:xmlDocument></ns0:SaveISDocument>
In CDATA is a Base64 representation of some file.
I hoped at oubound of SOAP adapter sholud be something like this:
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header/><SOAP:Body><ns0:SaveISDocument xmlns:ns0='http://pl.optix.pl/aews'>
<ns0:SaveISDocument xmlns:ns0="http://pl.optix.pl/aews">
<ns0:xmlDocument><IMAGES><IMAGE FileName="tmp.xml" ClassName="IVX">
<![CDATA[PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iaXNvLTg4NTktMiI/Pgo8SU5WT0lDMDECiAgPElET0MCiAgICAgPEVESV9EQzQwPgogICAgICA8VEFCTkFNPkVESV9EQzQwPC9UQUJOQU0CiAgICAgIDxNQU5EVD4zMDwvTUFORFQCiAgICAgIDxET0NOVU0OTAzMTAyMzA4MzwvRE9DTlVNPgogICAgICA8RE9DUkVMPjQ1QjwvRE9DUkVMPgogICAgICA8U1RBVFVTPjMwPC9TVEFUVVMCiAgICAgIDxESVJFQ1QMTwvRElSRUNUPgogICAgICA8T1VUTU9EPjI8L09VVE1PRD4KICAgICAgPElET0NUWVASU5WT0lDMDE8L0lET0NUWVACiAgICAgIDxDSU1UWVAWjFJTlYwMTwvQ0lNVFlQPgogICAgICA8TUVTVFlQPklOVk9JQzwvOVk9JQzAxPgo=]]>
</IMAGE></IMAGES>
</ns0:xmlDocument></ns0:SaveISDocument>
</SOAP:Body></SOAP:Envelope>
Unfortunatelly there is something like:
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header/><SOAP:Body><ns0:SaveISDocument xmlns:ns0='http://pl.optix.pl/aews'>
<ns0:SaveISDocument xmlns:ns0="http://pl.optix.pl/aews"><ns0:xmlDocument><IMAGES><IMAGE FileName="tmp.xml" ClassName="IVX">
PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iaXNvLTg4NTktMiI/Pgo8SU5WT0lDMDECiAgPElET0MCiAgICAgPEVESV9EQzQwPgogICAgICA8VEFCTkFNPkVESV9EQzQwPC9UQUJOQU0CiAgICAgIDxNQU5EVD4zMDwvTUFORFQCiAgICAgIDxET0NOVU0OTAzMTAyMzA4MzwvRE9DTlVNPgogICAgICA8RE9DUkVMPjQ1QjwvRE9DUkVMPgogICAgICA8U1RBVFVTPjMwPC9TVEFUVVMCiAgICAgIDxESVJFQ1QMTwvRElSRUNUPgogICAgICA8T1VUTU9EPjI8L09VVE1PRD4KICAgICAgPElET0NUWVASU5WT0lDMDE8L0lET0NUWVACiAgICAgIDxDSU1UWVAWjFJTlYwMTwvQ0lNVFlQPgogICAgICA8TUVTVFlQPklOVk9JQzwvOVk9JQzAxPgo=
</IMAGE>
</IMAGES></ns0:xmlDocument></ns0:SaveISDocument>
</SOAP:Body></SOAP:Envelope>
... which is not correct, because CDATA tags are lost!
Anyone has idea, how to enable adapter to process message right?
Best regards,
Mikolaj

Henrique:
As I wrote - the webservice was wrote by 3rd party software supplier - so I wasn't sure if I could change a specification at this point - that was a reason why I needed a CDATA element. A CDATA element was at entry of this webservice and I couldn't send to it my data correctly using XI. That was a problem. Hope You got it now.
Finally I've managed the problem because 3rd party software supplier agreed to change their service and use <CDATA> tag instead of CDATA element.
I solved the problem but my question still remain not answered.
At OSS I was asked to upload latest SP (now I've got 12 at Java Stack).
If this will help I'll close this thread.
Best regards
Mikolaj

SOAP receiver adapter - payload inside the soap envelop

Hi,
We have to send a SOAP message to 3rd party from PI 7.1. Using SOAP receiver adapter - we are trying to achieve this. 3rd party software is unable to accept payload as an attachment of the main envelop - they want it enside the main envelop.
I tried with "Keep attachment" option - but PI still keping the payload as an attachment. I think this option is for handling "extra" attachment.
Is there any way we can keep the payload inside the envelop?
In run-time WB, at the moment envelop looks like
<SOAP:Envelope xmlns:SOAP="http://schemas....
<SOAP:Body>
<sap:Payload xlink:type="simple" xlink:href="cid:payload-d6518670ca1311debbd9ca347000800b...">
</SOAP:Body>
</SOAP:Envelope>
And the payload d6518670ca1311debbd9ca347000800b... ( again viewed from RWB) - contains the data.
<?xml version="1.0" encoding="UTF-8" ?>
<ns2:Order> ....
</ns2:Order>
Can we insert this payload directly inside the SOAP:Envelope body instead of a link there?
Regards,
Sudhin

Hi!
It seems to me that this 3rd party is expecting only XML not SOAP.
If this is the case, you should use the HTTP Receiver adapter instead of SOAP.
Some systems 'say' they can speak SOAP but they can only speak XML. Not to blame, it's a mistake many make these days.
The only way you use SOAP Receiver adapter with this 3rd party, is that if someone from the 3rd party hands you a WSDL file.
Ricardo Sancio Lóra
Brazil

Error in the SOAP Receiver communication channel

Hi ,
My scenario is RFC - to -SOAP (synchronous ) i have specified the TARGET URL inthe SOAP receiver comminication chanel.. but while testing the interface by providing the test data from R/3 .. I'm not getting any Respose.. ..
If I check in the SXMB_MONI in i'm getting the following message .. but the URL whicjh i provided that is fine.. but my doubt is through XI may be it's not able to connect the Target System... .. so, please suggest me...
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: www.webservicex.net</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
regards
Jain

By default, the SOAP adapter sends the SOAP message with the content type text/xml.
When you check "Do not use SOAP envelope", the default contnet type is application/xml.
You can change the content type like this: Go to the SOAP receiver communication channel module tab. Add the module "localejbs/AF_Modules/MessageTransformBean" before the standard module. Add the parameter name Transform.ContentType and value text/xml.
Check out this
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
One way of testing ur scenario
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
Also have a look here
SAP Note 856597
reward points if solution found helpfull
regards
chandrakanth

Adapter-specific message attributes for the JMS Receiver adapter

Dear SAP Community,
We are trying to activate some parameters at message level when SAP XI sent an interface (XML data) to IBM Websphere MQ. Programmaticaly, this is done the following way:
       TextMessage outMessage = session.createTextMessage();
       MQQueue replyToQ = new MQQueue("TESTQM01","SYSTEM.ADMIN.ACTIVITY.QUEUE");
       Destination replyTo = (Destination) replyToQ;
       outMessage.setJMSReplyTo(replyTo);
       outMessage.setIntProperty("JMS_IBM_Report_Exception", MQC.MQRO_EXCEPTION);
       outMessage.setIntProperty("JMS_IBM_Report_Expiration", MQC.MQRO_EXPIRATION);;
       outMessage.setIntProperty("JMS_IBM_Report_COA", MQC.MQRO_COA);
       outMessage.setIntProperty("JMS_IBM_Report_COD", MQC.MQRO_COD);
       outMessage.setIntProperty("JMS_IBM_Report_Discard_Msg", MQC.MQRO_DISCARD_MSG);
This code is working fine.
Since the documentation about this feature (Adapter-specific message attributes) is very light, We am not sure about the interpretation we made.
First, we defined the following attributes: MS_IBM_Report_Exception, JMS_IBM_Report_Expiration, JMS_IBM_Report_COA, JMS_IBM_Report_COD, JMS_IBM_Report_Discard_Msg. All of them are with type int.
Then we changed the mapping (XSL) to pass the value to the dynamic configuration, using the technical names (DCJMSMessageProperty0, ..., DCJMSMessageProperty4) and the value of the constants. We also specified a value in the Reply To Queue parameter of the adapter. As a test, We also change another parameter via the mapping (the correlation ID, to use the idoc number) and according to the log of the processed message, every thing is finde. According to the trace of the JMS adapter, everything is fine to. However, this has no impact on the message, only the correlation ID is changed.
The JMS server is IBM Websphere MQ (v6.0.2.1). It is already in production and working fine. This is a change we have been asked to implement.
Has anyone experience with the JMS receiver adapter-specific message attrbitutes ? What have we done wrong ?
Any help is greatly appreciated.
Regards,
Gregory PFISTER
SAP XI Analyst - Holcim

Hi Neha,
pls do chk the below links for SOAP adapter message attributes
http://help.sap.com/saphelp_nwpi71/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/content.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst38.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/webservices/webservices16.htm
Regards
Sampath

Dynamic URL in SOAP Receiver adapter

Hi all,
I have a scenario where I am using a SOAP receiver adapter to send a cXML document to some vendors. I need to change the URL based on the vendor number (passed by sender SRM system). So I have created a user-defined function and used in message mapping to assign the right URL to the variable TServerLocation. But the communication channel still prompts for a static URL which appears to be a mandatory field. Even though the DynamicConfiguration tab in Message Monitoring shows that the TServerLocation was correctly assigned, the scenario does not work when I put some dummy in the static URL field like 'dummy' or '*'. Any ideas on how to make the communication channel go for the dynamic URL field and ignore the static URL field? I have already selected the'Use Adapter Specific Message attributes' and 'Variable Transport Binding' check boxes. Am I referring to the correct variable that references the target URL? Also other than the two checkboxes that I mentioned, I am not displayed anything else under "Adapter Specific Message Attributes" section in the comm. channel.
Thanks

James,
I ve just been digging into SAP help, and have tried it too ... Looks like it doesnt work the way it is supposed to.
Anotheer point i found was, in the FILE ADAPTER, when we say ADAPTER SPECIFI ATTRIBUTES , we can select the attirbutes.. This is not possible in a SOAP adapter...
Maybe, we can only access the ADAPTER SPECIIFC ATTIRIBUTES of a SOAP adapter, but cannot set them dynamically.
Let me know if you find something on this issue.
Regards,
Bhavesh

CDATA in the soap receiver adapter ?

Similar Messages

Maybe you are looking for