CEN at Solman - which agent to install

Dear Gurus.
I have in my landscape SOLMAN 7 EHP1 , and different NetWeaver releases - 701 ,710 and 720 as monitored system,
When configured CEN at solman, which agent I need to install and configure on satellite systems? ccms agent+SAPOsCol or saphostagents, that installed togehter with 710/711 and 720?
Regards
Vladimir

Dear Vladimir,
As described in all the installation guides (chapter 2.2) attached to these SAP Notes, the official recommendation is as
follows (see SAP Note 1365123 for more details):
Solution Manager: Versions 7.00 (prior to EhP1)
Managed version: 6.40, 7.0, 7.0 EhP1 & 2, 7.1 EhP1
Agent to installl: 7.01 SR1 SAP Note 1357812
Solution Manager: Versions 7.0 EhP1 >= SP 18
Managed version: 6.40, 7.0, 7.0 EhP1 & 2, 7.1 EhP1
Agent to installl: 7.01 SR1 SAP Note 1357812
Solution Manager: Versions 7.0 EhP1 >= SP 20
Managed version: 6.40, 7.0, 7.0 EhP1 & 2, 7.1 EhP1
Agent to installl: 7.11 SAP Note 1234387 (*)
(*) The Diagnostics Agent 7.20 installer is not released for the time being (should be in the next few days). Therefore to install an agent 7.20, the only option is to download the standard SAP NetWeaver 7.20 DVDs (CE). Meanwhile, SAP recommendation is to install 7.11.
The fact that the release of the managed system has no impact on the Diagnostics Agent to install. Only the SOLMAN release is important. As of SOLMAN SP20 you can use either the Diagnostics Agent SAPinst 7.11 or the 7.20 one. There are no major differences between 7.11 and 7.20 (only bug fix u2013 e.g. host agent automatic installation - and SSL support).
If you choose to go with 7.11 please make sure SAP Host Agent is installed and running according to the Diagnostics Setup Guide available at http://service.sap.com/diagnostics -> media library.
Best regards,
Guilherme Balbinot

Similar Messages

Which version Diagnotics Agent to install for ERP6 systems using SM 7.1 ?

Hi,
I have a recently installed Solution Manager 7.1 system and would now like to add our managed systems for monitoring.
Our managed systems are all running NW EHP2 / ERP6 EHP5 and I have installed the latest SAPHostagent 7.2 on each of these systems. These systems are non unicode running on Suse Linux Enterprise 10.
I'm confused as to which version Diagnostic Agent to install for this setup. Under Solution Manager 7.1 in SWDC the managing agents are for a 7.3 installation only and the prerequisites require Suse Linux Enterprise 11. I'm not sure whether I can use agents located under older Solution Manager systems.
With the above information in mind can you help ?
Thanks.
Regards,
Nelis

Hi,
Please look in the table provided in below link.
http://wiki.sdn.sap.com/wiki/display/SMSETUP/Diagnostics+Agents#DiagnosticsAgents-Whichagentversionshouldbeused%3F
Regards
Vivek

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

I developed an application on xcode 4.2 which is not installing on ios 6.1.3. can any one solve my problem.

I developed application on xcode 4.2. I prepared .ipa using enterprise distributuin provisional profile file. I am able to installing that application on iPad which is having iOS 5.0. but which is not installing on iOS6.1.3 .
please provide the reasin why I am unable installing on iOS 6.1.3.
The application which is developed on lower version Xcode will not install on coming iOS versions like iOS 6.0, 6.1.3, 7.0.?
To install on latest version what should be the process?

Unfortunately, I don't have an earlier copy on my computer, since I hadn't needed to use the podcast app until I finally went through all the episodes I had that were playable in music.
Thanks for your reply, even though it's exactly the kind of answer I didn't want to hear. ;) How aggravating. Ugh.

My iPad won't open and keeps asking for a pass code, which I never installed?

My iPad mini won't open, it would appear to have a pass code which I never installed. This was the first time I charged it up and I'm confused. Can anyone help please?

What's the precise text of your error message, please? (There's a few different ones I can think of that you might be getting.)

I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available?

I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks

Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT

My computer says I cannot use icloud because I have multiple versions of outlook installed. How do I find out which versions are installed and how do I decide which one to delete?

My computer states that I have multiple versions of outlook installed and that i cannot use icloud. How d if find out which versions are installed and which ne to delete without interrupting the other?

That's a Windows/Office problem. You should ask in the Microsoft support forums.

What is the difference between Safari 5.1.7 and 5.1.10? I can not log on to my website, so that their customer service has said that they are using Safari 5.1.7, and I use 5.1.10 (which I have installed on my computer, Mac)

what is the difference between Safari 5.1.7 and 5.1.10?
I can not log on to my website, so that their customer service has said that they are using Safari 5.1.7, and I use 5.1.10 (which I have installed on my computer, Mac)

Might be the security fixes > Safari 5.1.10 for Snow Leopard

Old computer died and I am trying to install Illustrator CS5 on new computer. Last version I had before CS5 was/is Illustrator 10, which has been installed in new computer. CS5 install says I need CS2,3, or 4 before installing 5, but old computer went dir

Old computer died and I am trying to install Illustrator CS5 on new computer.
Last version I had before CS5 was/is Illustrator 10,which has been installed on new computer.
CS5 install says I need CS2,3 or 4 before installing 5, but old computer went directly from 10 to CS5.
How can I repeat this 10 to CS5 install?

It does not seem likely that CS6 was upgraded from version 10. You might want to check your purchase history in your Adobe account to see if there is some missing link in the chain of purchases you made.
You can always try contacting Adobe support thru chat to see if they can find information or otherwise assist you in this matter.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer. It then attempts to install the printer software, which is already installed. The only way to fix it is to unplug the printer. Any thoughts?

When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer. It then attempts to install the printer software, which is already installed. The only way to fix it is to unplug the printer. Any thoughts?

Turn the printer off.

I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one ye

I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one year. Then, I decided to change it to another computer, so I sisintalled it according to instructions. In the meantime I got a free trial of creative cloud on that computer, but I gave up and decided to reinstall my cd-roms. However, everytime I try to use acrobat for instance it says that my trial period ran out! I disinstalled my cloud products, I am using my registered full master series items, they have nothing whatsoever to do with my creative cloud FREE subscription. If I try to cancel my free membership, it is to no avail, there simply is no such possiblity. I want to use the software I paid dearly for, not the cloud items I disinstalled and which do not interest me. How can I contact Adobe to fix it? It was no fault of mine, I did all I was supposed to, disintalling items before installing the right ones, but the system must have some error i am not responsible for.

open an app and click help>activate.
if you try to open an app and see a 'your trial has expired" window, click license this software and enter your serial number.
if you can't do either, run the cleaner and make sure cc is cleaned from your computer, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

HT1364 I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive. What is the best way to install and move the itunes library to my C Drive?

I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive. What is the best way to install and move the itunes library to my C Drive?

If the entire library is on the external drive then simply copy the iTunes folder into <User's Music> on the new computer, then install iTunes. If you've already installed iTunes you will want to remove the empty iTunes folder in <User's Music> first.
If it turns out you only have the media folder on the external drive then take a look at this post...
tt2

Ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

My iphoto wont open since i updated my mac, please help? it says i need to install an iphoto library upgrader which I have installed but still cant see my photos.

my iphoto wont open since i updated my mac, please help? it says i need to install an iphoto library upgrader which I have installed but still cant see my photos.

What version of iPhoto are you using? 9.6 is the current version.
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.iPhoto.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

For some reason my itunes will not open because it says that I need Quicktime 7.5.5 or later which I have installed. Any suggestions?

I recently had my computer cleared out and for some reason I am getting an error when I try to open my iTunes. It says that I need to install Quicktime 7.5.5 or later which I have installed and I keep getting this error mesage. Any suggestions?
Also I am opporating MacOS 10.5 Do I have to buy the software from the store or can be be downloaded off the apple site? I have heard that you need the actual software from a retailer?
RB

Hi, try this...
http://www.apple.com/itunes/download/

CEN at Solman - which agent to install

Similar Messages

Maybe you are looking for