Center Button Within Region

How do I center a button within a region? I tried 'align="center"' but this seemed to be ignored. The button is at the left of the screen. Also, what are the 'display points' (Page Template Region Position 1-8) used for, and why is there a specification for column position of 1-9? Could these be attributes that will allow my button to be centered on the window instead of on the left?
Thank you!

Question was answered on another post.

Similar Messages

Button within Region

Hi,
Previously, I created a screen that had a Password field and next to it a button marked as 'Approve'. When the user filled in his password and clicked the button, the Approved By field wouild be filled in and the DML update process would update the record. I checked for :REQUEST in ('SAVE', 'APPROVE'). I had tested this and it worked.
Sometime after the testing, I upgraded to Apex 2.2. I just built another screen that, in effect, cloned the Approve processing and found that I cannot make it work and that the original screen does not work as it used to. The session state shows that the appropriate values are being set/calculated and the debug process shows that the DML process is 'running' but no update is occurring. If I do a 'normal' update via a SAVE button at the top of the region, the DML process stores the record and if the session state for the Px_Approved_BY screen field has been set by the Approve process then its value goes into the data base record too.
I think the difference in behavior is caused by the fact that SAVE button has a Database Action attribute of SQL Update action associated with it while the Approve button within the region has no data base action attribute.
Is there a way to get around this new 'feature' without moving the Approve button to a non-intuitive position in the screen?
thanks,
Peter

Peter - Can you put an example on apex.oracle.com and show us what is not working?
Scott

Center aligning within a breakpoint? This would be very helpful.

Center aligning within a breakpoint? This would be very helpful.

You can try the center button in the advanced layout panel. It will center an object instead it's parent container. You can have that object centered in one breakpoint and aligned left or right in another.
Hope that helps and thanks for using Reflow!
Chris

Momentary degraded playback when using wheel, center button

Within the last month or so, I have noticed a degradation of playback quality when I use the wheel or the center button. What I mean by degradation is that the playback will "stutter" a bit (up to a second), as if the iPod doesn't have the memory to handle it all. Perhaps another good word to describe this is "garbled." Sometimes it's worse than others.
For example, if I use the button during playback to change the song's rating. Another example: when the iPod transitions to show the time after the screen has gone dark for a minute, there is also degradation. A final example: when I'm running and using the stopwatch, when I use the lap function, there is often stuttering a few seconds later (i.e., when the screen does dark.
It doesn't happen all the time, but it happens often enough to be annoying...perhaps 25% of the time I use the button and/or click wheel.
I've had the iPod for about 7 months. I'm not certain, but I don't think it happened until the most recent iPod software update.
Anyone else experiencing this?
Any advice?

Hey, great news. After posting my last post, I reinstalled iTunes. I had actually uninstalled it a while back, and was using the iPod as it was for a little over a month.
So after I reinstalled itunes, I synched my ipod to it and put a couple new songs on my ipod. After the sync was completed, I started listening and there wasn't any more scratching/ skipping noise +at all+, even when I repeatedly tapped the wheel to test it. And +it was horrible+ before. I couldn't even listen to music and use the Cover Flow option at the same time. Now, it's back to the way it was before it started skipping. yay
I think the problem might have been that faulty software update that we did. And reinstalling Itunes will give you the correct version of the software. So my guess is that if you haven't tried *uninstalling and reinstalling itunes* yet, it might work for you too. : ]
Message was edited by: coffeelips

My classic is stuck on a blank screen and it won't connect to any device or reset when I hold the menu and center buttons. Any ideas what's up and how to fix it?

I know click hold on and off then hold the menu and center button until the apple logo appears. I have tried this so many times and my iPod Classic is still unresponsive! I've tried plugging my iPod into my Mac, my wall charger, my ihome, everything, but nothing works. It won't connect to iTunes to restore or anything. I've tried leaving it unplugged long enough to let the battery die and then tried plugging it in, a method I've utilized successfully with other iPods but that didn't work either. I really just starting to lose faith in the quality of this product. The first classic I bought didn't work at all and I had to exchange it. This one I bought to replace my 5 year old nano and it hasn't even lasted 7 months! Somebody please offer me a solution and assure me that I didn't waste $250 on a crap piece of technology. I'm desperate!

Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.

Get the value of a selected radio button within a ToggleGroup

All
Please see the script below. All I'm trying to do is to identify the selected radio button within a ToggleGroup. This has been working in JavaFX 1.2.
This is JavaFX 1.3 running on NetBeans 6.9 (beta) on Ubuntu 10.04
Does anyone know why this is no longer working?
import javafx.scene.Scene;
import javafx.stage.Stage;
import javafx.scene.control.ToggleGroup;
import javafx.scene.control.RadioButton;
import javafx.scene.layout.HBox;
import javafx.scene.control.Toggle;
def levelGroup = ToggleGroup {};
var selected: Toggle = bind levelGroup.selectedToggle on replace {
    // here I want to capture the value of the selected toggle
    // the outputted value is always 'null'
    println("level toggle = {selected.value}");
    println("selectedToggle = {levelGroup.selectedToggle.value}");
Stage {
   scene: Scene {
      width: 300
      height: 300
      content: [
         HBox {
                translateX: 100
                translateY: 67
                spacing: 20
                content: [
                    RadioButton {
                        toggleGroup: levelGroup
                        text: "Easy"
                        selected: false
                    RadioButton {
                        toggleGroup: levelGroup
                        text: "Medium"
                        selected: true
                    RadioButton {
                        toggleGroup: levelGroup
                        text: "Hard"
                        selected: false
}

Actually, your code above wouldn't have worked in JavaFX 1.2 as we only added the value property to the new Toggle mixin in 1.3. I believe what worked for you in 1.2 was when you referred to text, which is not a property on Toggle, so you need to cast the selected variable from Toggle to a RadioButton, which does have a text property. For example, this would work:
var selected: Toggle = bind levelGroup.selectedToggle on replace {
    println("level toggle = {(selected as RadioButton).text}");
    println("selectedToggle = {(levelGroup.selectedToggle as RadioButton).text}");
}Alternatively, instead of casting like this, you can store a value in the value property of the Toggle mixin class, which is extended by RadioButton. For example, your code could be changed to the following (in particular note that the only change is the addition of the value properties in each of the RadioButton):
import javafx.scene.Scene;
import javafx.stage.Stage;
import javafx.scene.control.ToggleGroup;
import javafx.scene.control.RadioButton;
import javafx.scene.layout.HBox;
import javafx.scene.control.Toggle;
def levelGroup = ToggleGroup {};
var selected: Toggle = bind levelGroup.selectedToggle on replace {
    println("level toggle = {selected.value}");
    println("selectedToggle = {levelGroup.selectedToggle.value}");
Stage {
   scene: Scene {
      width: 300
      height: 300
      content: [
         HBox {
                translateX: 100
                translateY: 67
                spacing: 20
                content: [
                    RadioButton {
                        toggleGroup: levelGroup
                        text: "Easy"
                        selected: false
                        value: "Easy"
                    RadioButton {
                        toggleGroup: levelGroup
                        text: "Medium"
                        selected: true
                        value: "Medium"
                    RadioButton {
                        toggleGroup: levelGroup
                        text: "Hard"
                        selected: false
                        value: "Hard"
}This approach saves you from having to cast from Toggle to RadioButton. This second approach is actually very powerful, as you can store any object in the value field, and can then easily retrieve it at a later point when the user selects the desired RadioButton. Of course, you can just use it as in the simple case above as well.
I hope that helps.

My center button is not working on my ipad2

The center button on my ipad2 stopped working. Any ideas---please I need help

Have you tried restarting the iPad? Sometimes if you haven't restarted in a long period of time, weird things can occur.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

IPod restarts every time I click the center button

Every time I click the center button to go into the music folder, my iPod restarts, so I can't get into those files. It sometimes happens when going in to the extras folder as well. What do I do?!

Do you have any podcasts on your ipod?
My nano has a very strange problem with resetting too, whenever I transfer a podcast to the ipod, listen to them using the 'Podcasts' folder itunes makes in the ipod's music folder(not playlists, but in the root music menu, before playlists), then delete just the podcast itself instead of the whole podcast folder, then I try going back into the music menu on the ipod, it restarts every time.
Only fix I've been able to come up with is just creating a new playlist for just podcasts, and putting my podcasts in that playlist and deleting the 'Podcasts' folder that itunes creates everytime I transfer a podcast to the ipod.

Manual Bank Subaccount Clearing 1:N – Profit Center Assignment within NEW GL

Hello guys,
What is the common practice to do Manual Bank Subaccount Clearing for Vendors outgoing payments? My main concern is Profit Center Assignment within New GL.
The business process is:
Payment Program (F110) creates multiple JEs to Bank Subaccount with different Profit Centers inherited from Vendor’s Invoices
JE #1 (GL View)
Debit:   Vendor_1               Profit_Center_1    $400
Credit: Bank Clearing GL   Profit_Center_1     $400
JE #2 (GL View)
Debit:   Vendor_2               Profit_Center_2     $600
Credit: Bank Clearing GL   Profit_Center_2      $600
When the payment is showing on Bank Statement in a lump amount, a posting with clearing should be done to make an entry on the Main Bank Account and to clear Bank Subaccount (F-04).
Credit: Main Bank GL   Profit_Center_????? $1,000
Debit: Bank Clearing GL   Profit_Center_1      $ 400 (PC assigned automatically by the system within the clearing)
Debit: Bank Clearing GL   Profit_Center_2      $ 600 (PC assigned automatically by the system within the clearing)
If Profit Center is not filled manually in Main Bank GL account line -> the system issues “Balancing field “Profit Center” in line item 001 not field”
Please share your experience whether a user makes multiple entries to Main Bank GL as a number of Profit Centers in ACH Clearing GL, or a Dummy Profit Center is used….
Thank you in advance

Hi
In most of my projects, a common profit center is defaulted to the Bank Account through FAGL3KEH in a new gl environment. This is because the payment function had been centralized and so it was booked to the corporate profit center which was also a common profit center.
However, it would again depend on your business requirements as to how they would like to see the profit center reporting. You may look at a substitution through an exit to default the profit center for the main bank gl.
Regards
Sanil

Hi I was using whatsapp on my iPhone5.I was not able go to the main menu by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black

I was not able go to the main menu from whatsapp by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black & white. how can i fix it?

Hello monicaa003,
Thanks for participating in the Apple Support Communities.
If your iPhone display turned black and white after holding down the Home button for 2 seconds, first try pressing the Home button again to go to the main menu (Home screen.)
For reference, holding down the Home button for 2 seconds will trigger Siri if that feature is enabled:
About Siri - Apple Support
If pressing the Home button doesn't return you to the main menu, try restarting or resetting your iPhone:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Additionally, if Whatsapp is not responding or working as expected, see the troubleshooting steps at this link:
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best Regards,
Jeremy

How do I Re enabled the Buttons in MainMovie.swf from a Button within SecondMovie.swf???

I have the following situation
MainMove.swf is doing a loadmovie of SecondMovie.swf
The Button that loads SecondMovie.swf also disables other buttons in MainMovie.swf
on (release) {
_root.intro_btn.enabled = false;
loadMovieNum("SecondMovie.swf", 2);
How do I Re enabled the Buttons in MainMovie.swf from a Button within SecondMovie.swf???
Using AS2 is this current project
Thanks

lol Sorry bout that I'm brand new here and was looking for the option to remove the post from the other location.

Button within a movie clip not working

Hiya,
I have a movie clip within my swf website that is basically
an icon that you roll over to produce the menu. The movie clip has
coding inside it to produce the rollover effect. This is as
follows:
stop();
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
this.onRollOver = function(){
rewind = false;
play();
this.onRollOut = function(){
rewind = true;
Whilst this coding works fine for this movie clip, for some
reason the buttons within the movie clip that appear as you
rollover them will not work when pressed. I am trying to get them
to navigate the main timeline, i.e. coding as follows:
on (release) {
_parent.gotoAndPlay("home")
_parent should be correct, I've tried it without and with
_parent._parent however still it has no effect. From what I can see
everything should be working fine.
Is there some reason why buttons will not work within this
sort of roll over effect movie clip?
Thanks for your help.

you can't assign mouse handlers to a parent movieclip and
expect a child movieclip to respond to mouse events: the parent
will intercept those events.
to remedy, either assign all your mouse handlers on the child
generation movieclips or use a hitTest() for one of the
generations.

Some Songs On iPod Don't Display Artwork Until Center Button is Pressed

Okay, I just got my computer revamped so I had my itunes library file and all the songs saved but I reinstalled iTunes. Now some songs on my ipod are acting weired by displaying all the song info to the left (the firmware calls for them to center when there is no album artwork) and when the center button is pressed twice you see the album artwork as if nothing was wrong. Now no one dare say restore it because that is my backup plan if all else fails. Here are Blured but recognizable pictures of the problem
http://srv0201-03.sjc3.imeem.com/g/p/ab5e10d23fea6f101a2ccba3938874cb_web.jpg
http://srv0201-03.sjc3.imeem.com/g/p/6e16bdbecff3c4552ec464d0f7670404_web.jpg

The only thing that does fix it is removing the artwork, syncing, adding the artwork, and syncing again. Obviously that's a pain because I have to go into "get info", clicking "artwork" and removing it from there one by one because the feature "Clear Downloaded Artwork" seems to not work.

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

My Ipod recently wheel and center button stopped working. Help?

I was putting music on my ipod, I ejected it then when i went to unlock it it unlcoked but the center button and wheel will not work. Yes, I have restored again and agian. i have also let it completely die. I know the button is not broken because it will go to home im i hom edown the ceter button and the menu. Helpp pleaseeeeeeee !?

Try restoring...
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
If you can't restore the iPod...
Apple - Support - iPod - Service FAQ

Center Button Within Region

Similar Messages

Maybe you are looking for