Center Points for Mapping - MOTN3

I am sending a camera down a polka dot road to end up revealing text.
I can keyframe the camera but i can tell that i am not on center. I have to keyframe soft rotaion as the camera is going around a curve. So i am just having a ball spending 1hr on 3 keyframes.
So is there a way to connect the center points of the circles to form the path points. This way all i would have to do

Preditor wrote:
So is there a way to connect the center points of the circles to form the path points. This way all i would have to do is key the rotation.
If I understand your question correctly, then yes. You can use the replicator to create your polka dot path.
Use the shape tool to create an open bezier path that will serve as your polka dot road.
Create a circle and replicate it. Use Geometry for the replicator shape and drag the shape path into the well.
Then create your camera and apply the Motion Path behavior to it. Change the path shape to Geometry and use the same shape path for the camera animation.
Andy

Similar Messages

Can I change the center point for a motion scale

I would like to motion scale an image with the center for the scaling at the bottom of the image, not the center of the image. I tried changing the anchor point numbers, but that moves the photo as well.

Try setting the Anchor Point - NOT the Center Point. The Ccenter Point is where the center of the image will be; the Anchor Point is the point at which the image is anchored.
-DH
Message was edited by: David Harbsmeier

Center Points

1.) Can someone give me an example of why you would want to
move the
center point in a symbol?
2.) Is it a better idea to move the center point for an
instance and not
the actual symbol?
Thanks.

Is SDO_GEOM.SDO_CENTROID what you are looking for?
Format
SDO_GEOM.SDO_CENTROID(
geom1 IN SDO_GEOMETRY,
dim1 IN SDO_DIM_ARRAY
) RETURN SDO_GEOMETRY;
or
SDO_GEOM.SDO_CENTROID(
geom1 IN SDO_GEOMETRY,
tol IN NUMBER
) RETURN SDO_GEOMETRY;
Description
Returns a point geometry that is the centroid of a polygon, multipolygon, point, or point cluster. (The centroid is also known as the "center of gravity.")
For an input geometry consisting of multiple objects, the result is weighted by the area of each polygon in the geometry objects. If the geometry objects are a mixture of polygons and points, the points are not used in the calculation of the centroid. If the geometry objects are all points, the points have equal weight.

What are the points for on my Game Center

Okay so I noticed that I have points on my iPhone for the Game Center what are the points for?

http://en.wikipedia.org/wiki/Game_Center#Points

What are the best approaches for mapping re-start in OWB?

What are the best approaches for mapping re-start in OWB?
We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
We have number of mappings. We built process flows for mappings as well.
I like to know, what are the best approches to incorportate re-start options in our process. ie a failure of mapping in process flow.
How do we re-cycle failed rows?
Are there any builtin features/best approaches in OWB to implement the above?
Does runtime audit tables help us to build re-start process?
If not, do we need to maintain our own tables (custom) to maintain such data?
How did our forum members handled above situations?
Any idea ?
Thanks in advance.
RI

Hi RI,
How many mappings (range) do you have in a process flows?Several hundreds (100-300 mappings).
If we have three mappings (eg m1, m2, m3) in process flow. What will happen if m2 fails?Suppose mappings connected sequentially (m1 -> m2 -> m3). When m2 fails then processflow is suspended (transition to m3 will not be performed). You should obviate cause of error (modify mapping and redeploy, correct data, etc) and then repeat m2 mapping execution from Workflow monitor - open diagram with processflow, select mapping m2 and click button Expedite, choose option Repeat.
In re-start, will it run m1 again and m2 son on, or will it re-start at row1 of m2?You can specify restart point. "at row1 of m2" - I don't understand what you mean (all mappings run in Set based mode, so in case of error all table updates will rollback,
but there are several exception - for example multiple target tables in mapping without corelated commit, or error in post-mapping - you must carefully analyze results of error).
What will happen if m3 fails?Process is suspended and you can restart execution from m3.
By having without failover and with max.number of errors=0, you achieve re-cycle failed rows to zero (0).This settings guarantee existence only two return result of mapping - SUCCSES or ERROR.
What is the impact, if we have large volume of data?In my opinion for large volume Set based mode is the prefered processing mode of data processing.
With this mode you have full range enterprise features of Oracle database - parallel query, parallel DML, nologging, etc.
Oleg

Why can't Siri locate contact addresses for map directions?

Having an issue with iphone 4s using Siri for locating addresses saved within contacts for map directions.
The problem is only evident on about half of the contacts so far.. the message i get is 'I couldn't find an address for .." even though the contact I asked for clearly has their address saved. I've doubled checked I've used the right address fields and seem fine.
I'm unable to distinguine the problem between the contacts where Siri works as it should and locate the address, and the ones it can't - including my home address.
Very frustating when I want directions in the car for driving and using hands free.
Any ideas guys?!

It seems to be a bug in the software. Other people have said it may have so something to do with siri not understanding UK postcodes properly. I don't really know but I seem to have found a solution, although cumbersome.
-Load up your contact from phonebook app
-Tap the address (apple maps should go straight to it)
-Double tap home and switch back to phonebook app
-Delete the address
-Diuble tap back into maps (the pin point should still be there)
-Press the little blue arrow on the pin
-Add to contacts > Existing contact
-Select contact
(Now this is the important bit)
-Tap edit then tap the right hand column off the address section in order to set it as home, work, etc.
-Done
Phew!!
It's long winded I know, but now I can just tell siri to get directions to so and so's home safely while driving without fiddling around tapping buttons.
Sort it out Apple. It should 'Just Work' outside of the US too you know.

Debugging Tips for Mapping and Validation modules

Hi,
I am new to CRM, anybody can send the dubuging tips for Mapping and Validation modules and the list of tables which I have to check before loading.
(Intilal load & delta load)
Regards
KHM

KHM,
The first thing you need to make sure is that all queues are deregistered on both systems. Check the settings in SMQR and SMQS on your systems. The next step is that your middleware connection user must be a dialog user in order to debug the middleware properly.
If you have those two steps done, then for an initial load you can actually go into to the queues and debug the entries from each queue. For a delta load you will need to put a break point in the transaction before the middleware trigger, and then turn on update debugging(if you want to go through the full process).
The only other key is looking up the correct function modules for the adapter objects to determine what is being called. Once you know these and have done the steps above you can in general debug.
Validate the information above in your system and then let me know where you are getting stopped in your debug process. We can then try to figure out why the debugger is not being called.
Good luck,
Stephen

Flash 8 - zero point for x, y changes in slide screens

When I begin building a slide presentation in Flash 8, the x
and y zero point for the stage is at the top left where I would
expect it to be. So I place a few things on the stage, add a slide
or two and suddenly the zero point is in the center of the stage. I
am not sure when exactly it happens or why. How do I stop this from
happening? How do I correct or set the point back to the top
left?

Actually our users are complaining that the Flash 10 grayscale antialiasing on device fonts does not look as good
as the Flash 8 style antialiasing.Virtually everyone uses LCD monitors now, and it seems like the Flash 8 color
dithering produce better results on these displays.
It is demonstrated that the Flash 10 player will render device fonts with
different algorithms when it is using AVM1 or AVM2, so what I would like to know is if there is any way to have programmatic control over this
choice in my Flash 10 application, so I can get the Flash 8 style antialiasing, or control other parameters on a device font, like sharpness, etc.

Measuring Point for Tools and Die Maintenance

Dear All,
I am trying to map the following process:-
My client has 10 press machines and around 250 Dies for punching. Dies are assembled to press machines and they produce jobs by punching.
Client has an Preventive Maintenance plan for each Die in terms of number of strokes punched by an Die. for e.g PM is done after every 300000, 600000, 900000, 1200000 strokes. Estimated life is 1200000.
What they want is when production person confirms the production order say for 10000 jobs the counter of the die should increase by 10000.......and so on. When the counter reaches 300000 preventive maintenance call should be scheduled.
What i have done is created an Die as an Equipment with PRT as equipment category. Created an measuring point for that Die, assined Usage formula etc.
I have created an Maintenance plan for that die in which i have assigned the strategy (IP11) which contains the stroke cycles 300000, 600000.........etc.
Assigned the Die as a PRT to the material which is to be produced in the Routing.
When i confirm the production order the counter of the PRT increases which i can check IK13.
What i am expecting is that in IP10 system should update the counter automatically so that when the counter reaches to 300000 maintenance call wil be scheduled and order will be generated.
I would request you to please give me some input on this.
Thanks and Regards,
Rashmi

Hello Rashmi;
I have seen the screen shots & there are problems with the following:
1) Counter overflow reading
You have entered 130; keep it as- 999999 (it is the reading after which system starts counting from 0 value)
2) Formula that you have used;
You have used the formula- SAPF02; do not use this. Create you own formula with following details: SAPF99 (new formula) = SAP_20 * SAP_09
3) You have manually entered the reading for the measuring point; do not use it. System will calculate the measurement reading from PRT usage value.
CREATE a single measuring document with reading as '0'.
4) Also in CA01; you need to assign this PRT in routing with "EQUIPMENT" & not material. Also make sure that in the same screen (assignment of PRT- basic data) maintain usage value as 1 (if this is not maintained, measuring doc. will NOT be updated).
5) Now when you confirm the production order, based on number of units created; system will automatically create the measuring doc.
If there is any problem with CA01, CO01 or CO11n; ask your PP consultant to assist.
Do let me know if there is any problem in this.
Regards
Hemant

Any Tutorials on Game Center Integration for iOS?

I'm currently developing an iOS game and would really like to use Game Center, I noticed the new Gaming SDK 1.1 has game center integration for Flash Builder, but Ive never used this before and have no clue where to start. I can't even seem to use the samples.
A tutorial on how to set this up would be nice if one could point me in that direction (I've tried google to no avail).
Also, are the ANE's for Game Center only usable via Flash Builder and not Flash Proffesional?
Thanks, Jordan.

For Integrating GameCenter in your app you need to perform following steps:
1)Create a development provisioning profile at https://developer.apple.com/ in which GameCenter store technology is enabled.You can do this by referring the following link:
https://developer.apple.com/library/ios/#documentation/IDEs/Conceptual/AppDistributionGuid e/ProvisioningStoreTechnologies/ProvisioningStoreTechnologies.html#//apple_ref/doc/uid/TP4 0012582-CH14-SW1
2)After creating provisioning profile,login into the https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa using the same credential using which you create your profile.Click on "Manage your Apps" tab and then tap on the "Add New App" button.
3)Fill in the App name and select the bundle ID using which you create your provisiong profile and click on continue.
4)Click on Manage GameCenter button and add leaderboard and achievements information for your App.
5)For integrating game center API's in your app you can refer the docs at:
http://www.adobe.com/devnet-docs/gamingsdk/anedocs/com/adobe/ane/gameCenter/package-detail .html
6) After all this package your app using the provisioning profile created in step 1.
All the ANE's availaible with GamingSDK 1.1 can be used with both Flash builder as well as Flash Professional.
Please let me know if you required any further information.
Thanks,
Sakshi

Motion Tab Settings & Center Point

Working in Final Cut Express HD, I am trying to use wireframes and the motion tab setting to run a series of cropped clips in a "box" in the corner of the screen. I do this by reducing Scale and Crop Left and Right to certain, set values. But since i am cropping different parts of different clips, I need to figure out what the Center Point settings should be for each one so that the "box" is always in the exact same spot on the screen -- even as it cuts from clip to clip inside the box. Using the naked eye to place the frame on a grid is not precise enough...
In other words, if I am cropping 25 off the left in one clip, and 15 left and 10 right on another, I need to know how many "Center Point" coordinates equate to 1 "Crop" point in those Motion Tab settings to make it fit exactly.
Any ideas or help would be GREATLY appreciated! Many thanks.

But doesn't that ONLY work if each and every clip is cropped in exactly the same way? In other words, if a "box" is 50% wide and 100% tall, and i use one clip that takes the left 50% and then use another clip that uses the right 50%...and I want them both to places in the upper left corner of the screen, won't they have different X and Y center points?

OMB02904: Namespace conflict for map name

Hello all,
I was running an OMB script which was to create the several Mappings, and after the creation of all the mappings it was supposed to commit. This script was being run in UNIX env, but unfortunately the UNIX session got killed and script terminated, persumably before commit, because I do not see any of the mappings in OWB.
So I started the script again but got this message,
OMB02904: Namespace conflict for map name MAP_1: PRS-00303: Name <MAP_1> Already reserved under your user name. with
oracle session ID: 31
I cleaned up the oracle sessions in Design Rep, but still getting the same error message both at command line and in GUI.
Has anyone else in the forum experienced similar problem. Any suggestions or pointer on How to fix thi will be appreciated.
TIA

It seems that the mapping got created. Have you tried to refresh the OWB client to see the mapping by clicking on the "Synchronize this view with the repository" button (second icon from the left just under the "Project" menu entry)? If this is true, you will either have to delete the existing mapping and commit, or rename your mapping.
Regards:
Igor

Doubt in configuring entry points for iviews

Hi, I have followed the steps of the help about configuring entry points for iviews:
1.-> in the pcd I have created a folder to store iviews for WPC.
2.->I have gived read permission.
3.->I have desactivated the hide root folder check por pcd repository.
4.->I have created a folder in km.
I am loosing in the step "Create a entry point for the folder that you created in step x".
How link the pcd folder that store the iviews with the km folder?
when I try to create a entry point I only can see km folders, How can I choose my pcd folder?
Thanks.
Regards.

Try this:
Procedure
1. Choose System Administration → System Configuration → Knowledge Management → Content Management → User Interface → Mapping → Component.
2. Edit the wpcDragExplorerEntryPoints configuration object.
Use the following parameters:
Parameter: Description
displaymode:Specify select
maxproviderprio: Highest priority number that standard entry points can have and still be displayed in the Web content browser
entriesperrow: Number of entry points displayed in each row (default: 5)
entrypointsprefix: Prefix of the entry point repository: If you specify a value for this parameter, standard KM entry points are also displayed in the Web content browser.
Default: /entrypoints
sharedcontent: Semicolon-separated list of paths to be displayed as global entry points for shared content
Examples of parameter values (for sharedcontent param):
displaymode=select,maxproviderprio=30,entriesperrow=5,entrypointsprefix=/entrypoints,sharedcontent=/wpccontent/Cross-Site Content;/pcd

Problem with option: enable this distribution point for prestaged content

Hi, for past few days I have been focused on application deployment with SCCM 2012 R2 (I am learning SCCM 2012 R2 reading books, watching video trainings . . .). Having followed allong book Mastering System Center 2012 R2 Configuration Manager I also did
deployment of Microsoft Office 2013, Adobe Reader 11, Foxit Reader 4.2 and Notepad ++ to test collection containing one Windows 7 computer. In one of examples prestaged content file is created for Foxit Reader application. In order to do so, if I am
right, option Enable this distribution point for prestaged content
has to be checked on distribution point and I did that.
Problem is that I noticed deployment of any application to test collection failed every time - system waits for prestaged content file if this option is selected. Then I have to delete deployment of given application, application itself, deselect option
Enable this distribution point for prestaged content and create app, distribute it to DP and deploy to test collection - then everything works well.
To make things worse, having deselect option Enable this distribution point for prestaged content (I did it yesterday and I checked that several times) this morning I checked again and this option is selected again. What might be the cause
of this behaviour? I expected this option to be deselected - this is weird to say at least.

When you enable the option "Enable this distribution
point for prestaged content" on a DP, it causes newly created applications/packages to default to "Manually copy the content in this package to the distribution point"... This would then cause the deployments on the clients to remain
at 'waiting for content' - unless if you manually prestage the content, as this option requires it.
If you enable the option "Enable this distribution
point for prestaged content" on the DP, but want to automatically have CM distribute the content, then configure the app/package to do so,
before distributing the content: Distribution Settings tab > Prestaged distribution point settings > Automatically download content when packages are assign to distribution points.

Working with a center point

How is the Center Point used in CS5 when working with transformation tools? What types of things can be done with it?
Thanks.

When transforming one can just drag the Reference Point from its
position in the center of the transformation-rectangle (it might be
hard to see depending on the image).
Or it you want to have it at one of the corners or middles of sides
you can switch it in the Options bar.
As to the benefits: When one wants to scale radially(alt-shift) from
another than the oroginal center-position this allows for such a
transfromation – for example if one has to recreate a lores-montage
with high-res data it can be easier to line up one single element of a
semi-transparent SO with the layout and then scale from that point
until congruence is achieved.

Center Points for Mapping - MOTN3

Similar Messages

Maybe you are looking for