Central Inventory does not exist
Running rapidwiz for R12.1.1 new installation on Linux 5.5. No other Instances installed.
File system checks errors with the following:
Central Inventory does not exist. Skipping central inventory check...
Trying local inventory in Oracle Home...
Cannot find oraInventory
I am installing this fresh. There is nothing else on the box. Why do I have to recreate something that was never created in the first place?You never mentioned this above, and installing R12 could be part of the upgrade (that's why I have posted the docs above).
Some of those notes say reinstall Oracle. Is it supposed to create the oraInst.loc file in /etc when I start the installer?Yes it will.
I found a note that say's by design in R12 you do not have to run root.sh to create the oraInst.loc file. So what creates it?
Is there a file someplace that is hidden that say's the inventory is created so don't create it when rapidwiz runs? I've run this install a few times and deleted all the files created each time. Am I missing a file?Please check the installation log files for details about the error.
Thanks,
Hussein
Similar Messages
-
Central Inventory does not exist. Skipping central inventory check...
Still struggling in this error, i was able to install 1st instance and works fine , but i want to have Inventory for cloning practice , tried to install new instance still getting this, how to fix this, any workaround ?
[root@erp rapidwiz]# ./RapidWizVersion
Oracle Applications Rapid Install Wizard
Version 12.1.1.13
(c) Copyright 2000-2006 Oracle Corporation. All rights reserved.
Central Inventory does not exist. Skipping central inventory check...
Trying local inventory in Oracle Home...
Cannot find oraInventoryHi,
Please let me know if you are cloning or installing.
any work around to fix that after install? You can always recreate the centrl inventory in case of corruption/deletion/did not create by rapidwiz as follows
Note 742477.1 How to create, update or rebuild the Central Inventory for R12
How to Create a Clean oraInventory in Release 12 [ID 834894.1]
or i can try re-install alsoYou do no not need to reinstall.
Please also note that from R12, rapidwiz creates local inventories which is present in each of its own ORACLE_HOMEs
Thanks
Edited by: EBSDBA on Oct 15, 2011 1:43 AM -
\OPatch\docs\etc\config\inventory" does not exist.
Dear One,
I have up-graded my Database 11.2.0.1 to 11.2.0.3.while applying the OPatch below error is coming...
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = F:\app\Administrator\product\11.2.0\dbhome_2\OPatch
Details = PatchObject constructor: Input file "F:\app\Administrator\product\11
.2.0\dbhome_2\OPatch\etc\config\actions" or "F:\app\Administrator\product\11.2.0
\dbhome_2\OPatch\etc\config\inventory" does not exist.
ApplySession::process() cannot load PatchObject: PatchObject constructor: Input
file "F:\app\Administrator\product\11.2.0\dbhome_2\OPatch\etc\config\actions" or
"F:\app\Administrator\product\11.2.0\dbhome_2\OPatch\etc\config\inventory" does
not exist.
OPatch failed: PatchObject constructor: Input file "F:\app\Administrator\product
\11.2.0\dbhome_2\OPatch\etc\config\actions" or "F:\app\Administrator\product\11.
2.0\dbhome_2\OPatch\etc\config\inventory" does not exist.
Locker::release()
Log file location: F:\app\Administrator\product\11.2.0\dbhome_2\cfgtoollogs\opat
ch\opatch2013-01-19_14-56-18PM_1.log
Cleaning up the directory : "F:\app\Administrator\product\11.2.0\dbhome_2\.patch
_storage\patch_unzip"...
OPatch failed with error code = 73
So,pls suggest me anyone how can i proceed the OPatch apply.........you don't use optach to upgrade your database , Please Read the below Document That describe usage of Optach
http://docs.oracle.com/cd/B19306_01/em.102/b16227/oui8_opatch.htm
You Must have patch Number : 10404530 which can be downloaded from https://support.oracle.com
Similar thread
Upgrade 11.2.0.1 to 11.2.0.3 -
Oui Inventory dir does not exist or is not writable
Hello there.
So this is another problem when installing 9i on HP-UX 11.0.
After entering the group the oui request to execute the /tmp/OrainstRoot.sh with root privileges.
Finished the script without any errors as root
the oui show an error
The Oracle Universal Installer Inventory on this system does not exists or is not writable.
- I checked that I really executed the script as root without any error
- and the install user (oracle) is member of the install group (oinstall)
So I checked every of the suggested problems without results.
If you encountered the same problems somewhere...please let me know.
Thanks
SigiI'm having exactly the same problem trying to install 10g on HPUX 11.23.
The orainstRoot.sh script completed successfully but then I get the same error as you.
Did you manage to resolve this issue? Sorry I'm no help to you,
cheers,
Scott -
Add HW Inventory class that does not exist in a default inventoried class
Hello all,
I am trying to find a way to create a new class to supersede the win32_logicaldisk class. We are looking to add the VolumeDirty flag since it does not exist in the current SMS_logicaldisk class. However I cant seem to find a good way to do this. Has anyone
done something like this before? Adding new classes doesn't seem to be difficult, but since this is a default WMI class that is being inventoried, I don't want to make any modifications to it as I know I will regret it down the road. I was thinking maybe creating
a configuration item and inventorying it that way? Thoughts? Or is this even possible? Thanks in advance!
ScottI do similar things--create a new I-Made-It-Up class to pull in something that the default doesn't. I understand and agree with not modifying default classes--it perhaps would never be a problem--but if (perhaps maybe) some future upgrade or cumulative
update failed to install because you modified a default class, it could be a sad sad day. :)
If you want me to just write the mof edit for you, let me know. Otherwise for a sample of how to do that; look at the mof edits for 'making up my own' SQL inventory:
http://mnscug.org/blogs/sherry-kissinger/328-installed-sql05-sql08-sql12-sql14-version-information-via-configmgr-hardware-inventory
Essentially, you make up a configuration.mof edit; making a 'copy of' what you really want out of win32_logicaldisk, but you dump it into a cm_scott_x_awesomeness (or whatever you want to call it), and you put that at the bottom of configuration.mof
on your server.
Then your to-be-imported.mof into default client, hardware inventory, classes... import (if you're old skool, the sms_def.mof piece of it) will be a .mof file to inventory cm_scott_x_awesomeness
Just be careful to name what you really want to see in v_gs_NameThatView inside the quotes SMS_Group_Name and SMS_Class_ID. You'll be living with that table and view name forever, so maybe, perhaps, calling it Scott_X_Awesomeness just might not be
the best name ever (although it sounds great right now, at review time w/the boss maybe not so much).
Standardize. Simplify. Automate. -
Unable to login: SAP System Message: Dynpro does not exist
Hello All,
I'm created a test system to practice our upgrade post steps on. I created a pared down copy of one of our other systems. When I try to login, I get a popup message saying: Dynpro does not exist.
To create the pared down version, we used empty files for:
COEP
GLPCA
BALDAT
MSEG
BSIS
LIPS
LTAP
CE1LPOC
ZHYPFIT
BALHDR
VBFA
COSP
COSB
CDCLS
ZHYPF2A
/IRM0760
CDHDR
COSS
CMFP
CHVW
RESB
ZHYPFIO
AUSP
VBOX
JCDS
VBAP
We don't think these being empty is the problem, but I wanted to mention it just incase it is.
Below is the dev_w0 log. I've been searching Google / SDN / OSS for some of the errors but haven't come up with anything yet.
Any insight you might have into this would be appreciated. Thank you.
~TJ
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 79
M sid Q60
M systemid 324 (IBM iSeries with OS400)
M relno 7000
M patchlevel 0
M patchno 172
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 6396
M
M
M Thu Jan 22 15:12:50 2009
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 6396) [thxxhead.c 1290]
M ThInit: running on host USALSAPU
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jan 22 15:12:51 2009
C R3INLPGM: RmtExeLib from /usr/sap/Q60/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is KRNQ60700
C DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.
C DbSl/DB codepage check: table or row not found (db_rc=24) - OK.
C === Central DB connect successfull! ===
C === Connection settings ===
C connected = TRUE
C con_hdl = 0
C db_handle = 1
C dbhost = USALSAPU
C rdbname =
C dblib = R3Q60DATA
C r3sysle_changed = TRUE
C query_compl_reval = O
C dbconnecttype = L
C user = Q6079
C qaqqinilib = Default (QUSRSYS)
C dbjobname = WP00
C dbjobuser = Q6079
C dbjobno = 197762
C rmtexelib = KRNQ60700
C parallel_alter_tables = *OFF
C ===========================
C Found only default query options in QUSRSYS/QAQQINI.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = Q60
C Character encoding = UNICODE
C process class = dialog process
C workprocess id = 0
C local host = USALSAPU
C dbhost = USALSAPU
C rdbname =
C dbname = Q60USALSAPU
C dblib = R3Q60DATA
C application server = DVEBMGS79
C Connect type = LOCAL
C pid = 6396
C wpjobname = WP00
C wpjobuser = Q6079
C wpjobno = 197762
C DB2/400 vers. appl. server = PASE 1
C DB2/400 vers. DB server = V6R1
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = OFF
C allow_cancel = Try (Unspecified)
C nqe_optimize_method = O - All I/O (compatibility mode)
C nte_list_size = 10
C dbsl_alternate_package = OFF
C -
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090122 151250 USALSAPU
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0x7000002d0000000, size: 120000000)
M SHM_ROLL_AREA (addr: 0x7000002e0000000, size: 268435456)
M SHM_PAGING_AREA (addr: 0x7000002f0000000, size: 335544320)
M SHM_ROLL_ADM (addr: 0x700000310000000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x700000320000000, size: 820256)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0x700000330000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x700000340000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers created
B dbntab: Buffer FTAB(hash header) (addr: 0x700000360000088, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0x7000003600002d0, size: 1280008)
B dbntab: Buffer FTAB(item array) (addr: 0x700000360138ad8, size: 5120000)
B dbntab: Buffer FTAB(data area) (addr: 0x70000036061aad8, size: 122880000)
B dbntab: Buffer IREC(hash header) (addr: 0x700000370000088, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0x7000003700002d0, size: 1280008)
B dbntab: Buffer IREC(item array) (addr: 0x700000370138ad8, size: 1280000)
B dbntab: Buffer IREC(data area) (addr: 0x7000003702712d8, size: 15360000)
B dbntab: Buffer STAB(hash header) (addr: 0x700000380000088, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0x7000003800002d0, size: 1280008)
B dbntab: Buffer STAB(item array) (addr: 0x700000380138ad8, size: 1280000)
B dbntab: Buffer STAB(data area) (addr: 0x7000003802712d8, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0x700000390000088, size: 2976)
B dbntab: Buffer TTAB(anchor array) (addr: 0x700000390000c28, size: 1280008)
B dbntab: Buffer TTAB(item array) (addr: 0x700000390139430, size: 3200000)
B dbntab: Buffer TTAB(data area) (addr: 0x700000390446830, size: 23360000)
B
B Thu Jan 22 15:12:52 2009
B dbstat: table statistics switched on for 84171 tables
B dbstat: TABSTAT buffer created (addr: 0x7000003a0000000, size: 41152488)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000003b0000100, size: 350000000, end: 0x7000003c4dc9480)
B dbtbxbuf: Profile: max_objects = 40000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 104857600
B ***LOG BB0=> buffer TABL started with length 350000000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Buffer TABLP (addr: 0x7000003d0000100, size: 35840000, end: 0x7000003d222e100)
B dbtbxbuf: Profile: max_objects = 2000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 17590656
B ***LOG BB0=> buffer TABLP started with length 35840000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 29 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 80021 * 48 = 3841008
B 4: 40000 * 256 = 10240000
B 5: 80021 * 8 = 640168
B 6: 1 * 200 = 200
B 7: 513 * 8 = 4104
B 8: 262473 * 256 = 67193088
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0x7000003f0000108, size: 81920000, end: 0x7000003f4e20108)
B ***LOG BB0=> buffer EIBUF started with length 80000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 0x700000400000108, size: 4194304, end: 0x700000400400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 40009 * 48 = 1920432
B 4: 20000 * 256 = 5120000
B 5: 40009 * 8 = 320072
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 65617 * 512 = 33595904
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 0x700000410000108, size: 40960000, end: 0x700000412710108)
B ***LOG BB0=> buffer CUA started with length 40000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR (addr: 0x700000420000108, size: 4194304, end: 0x700000420400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#10 @ 2305] [dbcalbuf2305 ]
B dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
B max_blocking_factor = 20, max_in_blocking_factor = 40,
B min_blocking_factor = 10, min_in_blocking_factor = 10,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 1, prefer_in_itab_opt = 1,
B convert AVG = 1, alias table FUPD = 1,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Jan 22 15:12:53 2009
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1152, total = 3048
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 0x700000040000000
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x700000040000768
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x7000000400007a0
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x7000000400007ac
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=/usr/sap/Q60/DVEBMGS79/sec, AS=USALSAPU, instanceid=79)
N SsfPseLoad: Downloading file /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse (client: , key: SYSPSE, len: 1872)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M CCMS: AlMsUpload successful for /usr/sap/Q60/DVEBMGS79/log/ALMTTREE (0 MTEs).
M CCMS: start to initalize 3.X shared alert area (first segment).
S
S Thu Jan 22 15:12:54 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x18499b440
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 400
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x700000460000070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x700000460000740
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A
A Thu Jan 22 15:12:55 2009
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 139532kb, dir_size: 34808kb.
A Attached to PXA (address 0x700000470000000, size 1998848K, 4 fragments of 464832K )
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=0x7000000b0577000 leng=20955136 end=0x7000000b1973000)
A >> Shm MMADM area (addr=0x7000000b0a50fa8 leng=244096 end=0x7000000b0a8c928)
A >> Shm MMDAT area (addr=0x7000000b0a8d000 leng=15622144 end=0x7000000b1973000)
A RFC Destination> destination USALSAPU_Q60_79 host USALSAPU system Q60 systnr 79 (USALSAPU_Q60_79)
A RFC Options> H=USALSAPU,S=79,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 47822 bytes at 0x7000004f0000000
N
N Thu Jan 22 15:12:56 2009
N SsfSapSecin: PSE /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/Q60/SYS/exe/run/libsapsecu.o .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.172.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [17]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E
E Thu Jan 22 15:12:58 2009
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Jan 22 15:13:03 2009
M SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
A
A Thu Jan 22 15:13:07 2009
A *** ERROR => RFC ======> cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62379446
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62377117, {4978D392-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62379446 IDX=2
[abrfcio.c 8185]
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62382527
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62382527 IDX=3
[abrfcio.c 8185]
A
A Thu Jan 22 15:13:14 2009
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62392457
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 3, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62392457 IDX=6
[abrfcio.c 8185]
B
B Thu Jan 22 15:13:16 2009
B table logging switched on for client '010'
M
M Thu Jan 22 15:13:22 2009
M AS400_API connected to 'USALSAPU'. DBJob: (197789/QUSER /QXDARECVR )M *** ERROR => AS400_API (APICODE 23) failed with SY-SUBRC = 9 [abas4api.c 1548]
M *** ERROR => Cannot open file '/usr/sap/transD60/config/infoapar.610' [ 0]
A A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:22 2009
A
A ABAP Program SAPMSYST .
A Source SAPMSYST Line 1770.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Dynpro does not exist.
A
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Jan 22 15:13:23 2009
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:23 2009
A
A ABAP Program SAPMS380 .
A Source Line 0.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Dynpro does not exist.
A
M ThIUsrDel: th_rollback_usrdelentry = 1
M ***LOG R47=> ThResFree, delete (001024) [thxxmode.c 1384]
S
S Thu Jan 22 15:14:20 2009
S found spool memory service RSPO-ACTIONS at 0x70000046000a478Hi TJ,
you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
But, based on that data, I do not know which ones ;-(
There are dynpro tables like dynpload or d3456t or so not proper ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de -
ORA 04067 %rowtype and "PUBLIC". does not exist
Hi I have an error ORA-04067 for %rowtype in oracle 10g while running a form in turn it is calling a package. But the same thing is running fine with oracle 8i.
Is there any code changes we need to made to upgrade to oracle 10g. Is that not backward compatable to cursors. procedure is using rowtype variables.
can any one tell me the problem while migrating to oracle 10g from oracle 6i.
Basically I am getting two errors I am not sure whether these two are realted or not.
The error is Error code - 4067 and the Error - ORA 04067: not executed, Stored procedure "PUBLIC". does not exist.
We have applied a patch to solve "PUBLIC" issue but form is still not working.
procedure GetInventory
(p_inventory_rec in out INVENTORY%ROWTYPE,
p_lock BOOLEAN,
p_found out boolean,
p_locked out boolean) is
I will really appreciate your help.
Thanks
SandyPerhaps this link can give you some basic idea - i guess ->
db function throws ORA-04067 Procedure does not exist error in forms
Regards.
Satyaki De. -
Error-IM258-Object does not exist (Status Management)
Dear All
We have used the enhancement "MCI10001" for triggering the external E mail while scheduling the maintenance plan using T code IP10.
System will fetch the E mail ID from the equipment master -partner function either Vendor or User responsible and sends the mail
But while executing IP10 system throws an error message as follows
Error Msg no: IM 258- Object does not exist (Status Management)
This refers to an error in central status management.
Kindly help on the above issue
Regards
Thyagarajanl have same problem my code below
help me please .
if email is not INITIAL and ulke is not initial and sy-tcode eq 'QM01' and sy-ucomm eq 'BUCH' and I_VIQMEL-QMART = 'Q1'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = 'E-mail'
TEXT_QUESTION = 'E-mail Göndermek istiyormusunuz ?'
IMPORTING
ANSWER = answer
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2.
if answer eq 1 and ulke = 'TR'.
lt_mailtxt ='Değerli Müşterimiz,'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Şikayetiniz sistemimize alınmıştır. Müşteri şikayeti sorumlularımız sizlerle en yakın zamanda irtibata '.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'geçeceklerdir. Şikayetiniz için teşekkür eder, saygılarımızı sunarız.'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt =''.
APPEND lt_mailtxt.clear lt_mailtxt.
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
gd_doc_data-doc_size = it_packing_list-body_num * 255.
Populate the subject/generic message attributes.
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = 'Naksan KGM'.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table lt_mailtxt lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
CLEAR it_receivers.
it_receivers-receiver = email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
sender_address = 'sinan.tataroglu@***.com'
sender_address_type = 'INT'
commit_work = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_txt = lt_mailtxt[]
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
Push mail out from SAP outbox.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
elseif ulke ne 'TR' and answer eq 1.
lt_mailtxt ='Dear Customer,'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Your compliant has just entered to system. Customer complaint responsible will contact with you ASAP.'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Thanks for your complaint.'.
APPEND lt_mailtxt.clear lt_mailtxt.
gd_doc_data-doc_size = it_packing_list-body_num * 255.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = 'Naksan KGM'.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table lt_mailtxt lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
CLEAR it_receivers.
it_receivers-receiver = email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
sender_address = 'peykan.samli@****.com'
sender_address_type = 'INT'
commit_work = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_txt = lt_mailtxt[] "it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
Push mail out from SAP outbox.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF. -
Error in SAP installation ECC 6.0 "HKEY_LOCAL_MACHINE does not exist"
Here is log can any body suggest
INFO 2009-02-21 10:17:02
Connection request to guiengine backend by host 192.168.16.249 .
INFO 2009-02-21 10:17:07
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.2.xml'.
INFO 2009-02-21 10:17:07
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.3.xml'.
INFO 2009-02-21 10:17:07
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.2.xml'.
INFO 2009-02-21 10:17:07
Execute step changeUserInstall of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:23
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\change.log.
INFO 2009-02-21 10:17:23
Output of change user /install is written to the logfile change.log.
WARNING 2009-02-21 10:17:23
Execution of the command "change user /install" finished with return code 1. Output:
Install mode does not apply to a Terminal server configured for remote administration.
INFO 2009-02-21 10:17:23
Execute step chgautInstdirPublicAllOS4 of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:42
Execute step done of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:42
Execute step checkParams of component |NW_Onehost|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:42
Execute step fillContextForSoftwareFeatures of component |NW_Onehost|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:43
Execute step loadUsageTypes of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Init|ind|ind|ind|ind|2|0.
INFO 2009-02-21 10:17:44
Execute step fillContextUsageTypes of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0.
INFO 2009-02-21 10:17:44
Execute step setAllPossible of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:45
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.1.xml'.
INFO 2009-02-21 10:17:45
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.2.xml'.
INFO 2009-02-21 10:17:45
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jexclude.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jexclude.1.xml'.
INFO 2009-02-21 10:17:45
Execute step determineScenarioParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:45
Execute step prepareUsagesTableForUserInputXml of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:46
Execute step determinePossibleUsageTypesXml of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step prepareUsagesTableForUserInputDB of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step setDefaultsGuiValues of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step setDefaultsStackDetermined of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step chooseMandatory of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:48
Execute step makeABAPPartsImpossible of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:48
Execute step setDependencyRestrictions of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:49
Execute step prepareScenario of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:17:49
Execute step fillUsagesTable of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:17:50
Execute step selectUsages of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:18:00
Execute step selectUsagesNetWeaver of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:18:03
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output:
#Sat Feb 21 10:18:03 GMT+05:30 2009
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_08
jre
bin
java.vm.version=1.4.2_08-b03
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
sun.os.patch.level=Service Pack 1
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
PROGRA1
SAPINS1
ERP
SYSTEM
ORA
CENTRAL
AS
java.runtime.version=1.4.2_08-b03
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_08
jre
lib
endorsed
os.arch=x86
java.io.tmpdir=C\:
DOCUME1
ADMINI1
LOCALS~1
Temp
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_08
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;D\:
oracle
product
10.2.0
db_1
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;%JAVA_HOME%/bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
Administrator
user.timezone=GMT+05\:30
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar
user.name=Administrator
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_08
jre
sun.arch.data.model=32
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_08
java.ext.dirs=C\:
j2sdk1.4.2_08
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_08
jre
lib
rt.jar;C\:
j2sdk1.4.2_08
jre
lib
i18n.jar;C\:
j2sdk1.4.2_08
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_08
jre
lib
jsse.jar;C\:
j2sdk1.4.2_08
jre
lib
jce.jar;C\:
j2sdk1.4.2_08
jre
lib
charsets.jar;C\:
j2sdk1.4.2_08
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=pentium i486 i386
INFO 2009-02-21 10:18:03
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.1988.1235191614/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output:
CORRECT
INFO 2009-02-21 10:18:03
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_08 with JDK version 1.4.2_08.
INFO 2009-02-21 10:18:03
Execute step getCD of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:03
Execute step verifyJavaHome of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:03
Execute step verifyPolicy of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:04
Execute step setNWOption of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:04
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output:
#Sat Feb 21 10:18:04 GMT+05:30 2009
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_08
jre
bin
java.vm.version=1.4.2_08-b03
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
sun.os.patch.level=Service Pack 1
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
PROGRA1
SAPINS1
ERP
SYSTEM
ORA
CENTRAL
AS
java.runtime.version=1.4.2_08-b03
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_08
jre
lib
endorsed
os.arch=x86
java.io.tmpdir=C\:
DOCUME1
ADMINI1
LOCALS~1
Temp
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_08
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;D\:
oracle
product
10.2.0
db_1
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;%JAVA_HOME%/bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
Administrator
user.timezone=GMT+05\:30
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar
user.name=Administrator
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_08
jre
sun.arch.data.model=32
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_08
java.ext.dirs=C\:
j2sdk1.4.2_08
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_08
jre
lib
rt.jar;C\:
j2sdk1.4.2_08
jre
lib
i18n.jar;C\:
j2sdk1.4.2_08
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_08
jre
lib
jsse.jar;C\:
j2sdk1.4.2_08
jre
lib
jce.jar;C\:
j2sdk1.4.2_08
jre
lib
charsets.jar;C\:
j2sdk1.4.2_08
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=pentium i486 i386
INFO 2009-02-21 10:18:04
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath
finished with return code 0. Output:
CORRECT
INFO 2009-02-21 10:18:04
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_08 with JDK version 1.4.2_08.
INFO 2009-02-21 10:18:04
Execute step collect of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
WARNING 2009-02-21 10:18:05
*Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\ltpsnr).*
*WARNING 2009-02-21 10:18:05
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.*
*ERROR 2009-02-21 10:18:05
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.*
ERROR 2009-02-21 10:18:05
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
INFO 2009-02-21 10:19:50
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
WARNING 2009-02-21 10:19:50
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\ltpsnr).
WARNING 2009-02-21 10:19:50
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.
ERROR 2009-02-21 10:19:50
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.
ERROR 2009-02-21 10:19:50
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
INFO 2009-02-21 10:21:43
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
please provide me the solution .....Hello,
this error is really strange. At this step, sapinst scans all keys that are located under
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
in order to find existing SAP services and to retrieve their parameters. Since this usually happens in a sorted way, many other keys must have already been successfully retrieved.
My guess is now that there is a problem that is related just to the service that was processed in the current iteration: ltpsnr
-> call regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
-> locate the ltpsnr entry, is it actually there? If yes:
-> right click on the entry and chose 'permissions'
-> are the permissions here actually different compared to the other entries?
Best Regards,
Michael -
VENDOR is mapped to the dialog column (USAGE_VENDOR) that does not exist
Hello,
I'm trying to install Solman 4.0 Unicode. When I start sapinst and select a Central System, I get an error before it even gets to the point where I can input some parameters. The error is below, has anyone experienced this? Thank you.
~TJ
ERROR 2006-08-17 09:29:20 [iaxxctbctl.cpp:128]
CTableControl::retrieveDefaultValue
FGE-00003 The key db column VENDOR is mapped to the dialog column (USAGE_VENDOR) that does not exist.
TRACE [iaxxejsbas.hpp:388]
handleException<ESAPinstException>()
Converting exception into JS Exception Exception.
ERROR 2006-08-17 09:29:20
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2006-08-17 09:29:20
FCO-00011 The step selectUsages with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|5|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0|selectUsages was executed with status ERROR .
TRACE
<html><head></head><body><p>An error occurred while processing service <b>SAP Solution Manager 4.0 > SAP Systems > IBM DB2 UDB for iSeries > Central System > Central System Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>G:\usr\sap/SAPinst/SOLMAN/SYSTEM/DB4/CENTRAL/AS</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
INFO 2006-08-17 09:32:31 [iaxxgenimp.cpp:779]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|5|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0|selectUsages".FYI - I was using the NW2004s control file patch not NW2004sSR1. Once using the correct control files it worked.
~TJ -
Installation Fails :/ yxefkoe does not exist on the 'localhost' host
Hi Guys,
I am trying to install NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System on my pc. But I`m getting following error.
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
Here is the dump from the log file.
WARNING 2010-10-24 17:52:45.781
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEM\CurrentControlSet\Services\yxefkoe).
WARNING 2010-10-24 17:52:45.781
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
ERROR 2010-10-24 17:52:45.781
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
ERROR 2010-10-24 17:52:45.781
FCO-00011 The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR ( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.).
I have installed the Microsoft Loopback network adapter. And C:\WINDOWS\system32\drivers\etc\hosts file contains following entries.
127.0.0.1 localhost
10.10.0.10 anuja
10.10.0.10 being the address given to the Loopback connection and anuja is the hostname.
Please help me to solve this issue.
Thanks!Thank you PR Srinivas and Khaiser.
Actually I wish to explain how I solved the problem. I went to the key through the registry path. But saw that there was the folder present in the path but it was blank.
So I right clicked on the folder went to Permission. I tried giving Full Control Permission for 'System' user name which did not solve the problem.
Hence in the Permission option of yxefkoe registry key I clicked on Add. In the 'Select Groups or User' popup window I clicked on 'Advanced' option and then clicked on 'Find Now'. I selected the user name which I use to log in to windows and applied the changes.
After all these steps I found entries in the registry folder 'yxefkoe'. I right clicked on the yxefkoe folder and went to Permissions - > Gave Full Control to the newly added user name.
And then the problem was solved.
So I guess when you should find two users in the Permissions option on the yxefkoe folder.
1. System
2. User name which u use to log into windows. -- > It is displayed like this --> User_Name(Hostname/User_Name)
Correct me if i am incorrect here.
Thanks a lot for the help! -
Installing DI on Linux impossible : libclntsh.so does not exist
Hello,
We have an ECC6 ehp4 system (Central Instance) running on HPUX Itanium (B.11.23).
The database being Oracle 10.2 : Database Client Library : OCI_102 (10.2.0.2.0)
Now, we are trying to add a dialog instance running on a Linux Suse application server (Linux 2.6.5-7.244)
While performing the installation of the dialog instance we are facing a fatal error :
INFO 2010-08-09 12:07:08.526
Removing file /oracle/client/10x_64/dbclient.lst.
INFO 2010-08-09 12:07:08.530
Node /oracle/client/10x_64/instantclient_10204 already exists.
INFO 2010-08-09 12:07:12.513
Removing file /oracle/client/10x_64/instantclient_10204/ojdbc6.jar.
WARNING[E] 2010-08-09 12:07:12.536
FSL-02015 Node /oracle/client/10x_64/.created_by_SAPinst/instantclient_10204/libclntsh.so does not exist.
At this point the installation is cancelled
I checked the file libclntsh.so, in the aformentionned location, and it deosn't seem to be an autorization issue.
:/oracle/client/10x_64/.created_by_SAPinst/instantclient_10204 # ls -altr
-rrr-- 1 root root 2282 Jul 31 2009 SAPIC_README
drwxr-xr-x 3 root root 4096 Aug 9 12:07 ..
lrwxrwxrwx 1 root root 17 Aug 9 12:07 libclntsh.so -> libclntsh.so.10.1
Thank you ! RaoulHi Raoul,
The issue you are facing can be solved by following the below SAPnote
1416829 - Error: Oracle Shared Library <libclntsh.so> not found during Data Service installation.
However I am copying the solution from the SAPnote
Make changes in file EIMDSsetupcommon.pm at below part of code.
sub DSrepomanCMD
if ( $DBTYPE eq "Oracle") #Oracle
$DBCHECK_ENV = "$EIMDBENV/lib";
$repo_cmd .= "ORACLE_HOME=$EIMDBENV; export ORACLE_HOME; ";
Fixed it by changing "$DBCHECK_ENV = "$EIMDBENV/lib"; to "$DBCHECK_ENV = "$EIMDBENV/lib32"; in EIMDSsetupcommon.pm.
All the best ! -
Hi,
I am facing with this problem. System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist.
I have reviewed in central admin. And my custom.masted is active.
some idea?
Patriciais that a custom solution you deployed ?
look at your site collection master page gallery and verify if you have the master page .
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
Hello Colleagues,
I face following problem at our PI 7.1 System.
After import and activating Integration Builder (Directory) Objects I received the Error "Operation (Message) Mapping ... does not exist" but the object (s) exist at Enterprise Service Builder (Integration Repository) at respective Software Component Version.
The individual Product and respective Software Component Version was created at SLD and imported at Enterprise Service Builder (Integration Repository). Afterwards Namespaces with different objects was created incl. the missing Operation Mapping.
As Check:
When I try to import under menu Tools\Apply Model from ES Repository at Integration Builder (Integration Directory) i see onyl SAP (SAP BASIS 7.1) Software Components.
I am not able to find any object regarding the individual created Product\Software Component.
So, i asume objects from the Enterprise Service Builder (Integration Repository) aren't available at Integration Builder (Integration Directory).
SLD cache refresh and application restart already performed.
Any idea?
Many thanks in advance!
Regards,
JochenHi Laxmi,
attached short steps that we performed.
In general in upfront:
This behavior happend after import objects from DEV to TEST for Enterprise Services Builder (IR) and Ingegration Builder (ID) in addition manual object creation at SLD for Technical Systems and Business Systems.
We don't have (currently) a central SLD for each environments DEV, TEST, PROD (not finished setup up to now). For each environments we have a local SLD at PI (XI).
Deployment steps:
- Product and respective Software Component Version created under Software Catalog
- objects creation at SLD for Technical Systems
- objects creation at SLD for Business Systems
- objects imported from DEV to TEST for Enterprise Services Builder (IR) incl. save and activation
- objects imported from DEV to TEST for Integration Builder (ID)
- manual configuration for communication channels performed
- after save and activation i received following error message: "Object Operation Mapping: ... does not exist.
Because of this error message I thing objects out of the Enterprise Services Builder (IR) aren't available at Integration Builder (ID) but i don't know the cause.
Could you help me to understand this behavior?
Many thanks in advance!
Regards,
Jochen -
Hi All,
I have installed Clusterware 11gR2 on two node cluster Solaris 10 U9 SPARC.
After that I run Oracle Database installer and clicked next.
In Installation Options I checked ""Create and Configure Database".
After that I got the error message:
PRCI-1113: Directory /u01/app/grid/product/11.2.0/gridhome does not exist
and OUI terminate.
Information from logs:
INFO: Completed background operations
INFO: Moved to state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: InstallOptions UI Entering & Exiting processInput
INFO: Validating view at state <installOptions>
INFO: Completed validating view at state <installOptions>
INFO: Validating state <installOptions>
INFO: Completed validating state <installOptions>
INFO: InstallOptionsAction Actions.transition called
INFO: selectedInstallOption is :INSTALL_DB_AND_CONFIG
INFO: inventory location is/u01/app/oraInventory
INFO: Is CRS Installed true
INFO: inventory location is/u01/app/oraInventory
WARNING: Error while invoking SRVM..
Refer associated stacktrace #oracle.install.driver.oui.SRVMInstallExceptionHandler:384
SEVERE: [FATAL] PRCI-1113 : Directory /u01/app/grid/product/11.2.0/gridhome does not exist.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:385
[root@gt1000a /u01/app/oraInventory/logs]#
Please help me resolve that issue.
Regards,
DanielFor clusterware I am using grid user and for Oracle database oracle user.
Here is the output from env command:
[root@gt1000a /export/home/11g]# env
MANPATH=/usr/share/man:/opt/VRTS/man:/usr/dt/man:/usr/man:/usr/openwin/share/man
DTSOURCEPROFILE=true
TERM=xterm
SHELL=/bin/bash
SDT_NO_TOOLTALK=1
GTK_RC_FILES=/etc/gtk/gtkrc://.gtkrc-1.2-gnome2
WINDOWID=96471252
OLDPWD=/tmp/deinstall2011-09-10_12-04-39-AM/logs
DTHELPSEARCHPATH=//.dt/help/root-10.182.43.169-0/%H://.dt/help/root-10.182.43.169-0/%H.sdl://.dt/help/root-10.182.43.169-0/%H.hv://.dt/help/%H://.dt/help/%H.sdl://.dt/help/%H.hv:/usr/dt/appconfig/help/%L/%H:/usr/dt/appconfig/help/%L/%H.sdl:/usr/dt/appconfig/help/%L/%H.hv:/usr/dt/appconfig/help/C/%H:/usr/dt/appconfig/help/C/%H.sdl:/usr/dt/appconfig/help/C/%H.hv
LC_ALL=ja_JP.PCK
USER=root
DTDEVROOT=
XFORCE_INTERNET=True
OPENWINHOME=/usr/openwin
DTXSERVERLOCATION=remote
XMBINDDIR=/usr/dt/lib/bindings
GNOME_KEYRING_SOCKET=/var/tmp/keyring-I5BqD8/socket
SESSION_MANAGER=local/gt1000a:/tmp/.ICE-unix/12267,inet6/gt1000a:32901,inet/gt1000a:32902
SESSION_SVR=gt1000a
HELPPATH=/usr/openwin/lib/locale:/usr/openwin/lib/help
MAIL=/var/mail/root
PATH=/usr/sbin:/usr/bin:/usr/openwin/bin:/usr/ucb:/sbin:/usr/sbin:/opt/VRTS/bin:/opt/VRTSvxfs/sbin:/opt/VRTSdbed/bin:/opt/VRTSob/bin:/opt/VRTScps/bin:/opt/VRTSvcs/bin:/opt/VRTSodm/bin:/usr/lib/vxvm/bin:/usr/sfw/bin:/usr/ccs/bin
LC_MESSAGES=ja_JP.PCK
PWD=/export/home/11g
START_SPECKEYSD=no
EDITOR=/usr/dt/bin/dtpad
DTAPPSEARCHPATH=//.dt/appmanager:/usr/dt/appconfig/appmanager/%L:/usr/dt/appconfig/appmanager/C
LANG=ja_JP.PCK
TZ=Japan
SDT_NO_DTDBCACHE=1
XFILESEARCHPATH=/usr/openwin/lib/locale/%L/%T/%N%S:/usr/openwin/lib/%T/%N%S
PS1=[\u@\h \w]#
SESSIONTYPE=altDt
HOME=/
SHLVL=2
DTSCREENSAVERLIST=StartDtscreenSwarm StartDtscreenQix StartDtscreenFlame StartDtscreenHop StartDtscreenImage StartDtscreenLife StartDtscreenRotor StartDtscreenPyro StartDtscreenWorm StartDtscreenBlank
GNOME_DESKTOP_SESSION_ID=Default
G_FILENAME_ENCODING=@locale,UTF-8
LOGNAME=root
AB_CARDCATALOG=/usr/dt/share/answerbooks/ja_JP.PCK/ab_cardcatalog
DTDATABASESEARCHPATH=//.dt/types,/usr/dt/appconfig/types/%L,/usr/dt/appconfig/types/C
XMICONSEARCHPATH=//.dt/icons/%B%M.pm://.dt/icons/%B%M.bm://.dt/icons/%B:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B
DTUSERSESSION=root-10.182.43.169-0
DISPLAY=10.182.43.169:0.0
GTK_IM_MODULE=iiim
XMICONBMSEARCHPATH=//.dt/icons/%B%M.bm://.dt/icons/%B%M.pm://.dt/icons/%B:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B
G_BROKEN_FILENAMES=yes
dtstart_sessionlogfile=/dev/null
COLORTERM=gnome-terminal
_=/usr/bin/env
[root@gt1000a /export/home/11g]#
oracle user profile:
[root@gt1000a /export/home/11g]# cat /export/home/oracle/.bash_profile
export ORACLE_BASE=/u01/app/oracle
export GRID_HOME=/u01/app/grid/product/11.2.0/gridhome
export GRID_BASE=/u01/app/gridbase
export CRS_HOME=/u01/app/grid/product/11.2.0/gridhome
export CRS_BASE=/u01/app/gridbase
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
export ORACLE_SID=orcl
export LANGUAGE_ID=JAPANESE_JAPAN.JA16SJIS
export NLS_LANG=JAPANESE_JAPAN.JA16SJIS
export LD_LIBRARY_PATH_64=$ORACLE_HOME/lib
export LD_LIBRARY_PATH=$ORACLE_HOME/lib32
export CLASSPATH=:/JRE:/jlib:/rdbms/jlib:/network/jlib
export PATH=$PATH:/u01/app/oracle/product/11.2.0/db_1/bin:/u01/app/grid/bin
[root@gt1000a /export/home/11g]#
Edited by: nagardd on Sep 15, 2011 8:07 AM
Maybe you are looking for
-
When opening adobe priemere elements 11 get incompatible display driver error message?
have intel ( r ) hd graphics 2.1.0. build 8.15.10.2622---gone to intel display driver on my pc and it is up-to-date----is adoble elements not liking my current display driver on my pc and if so what can i do?
-
I rebooted my mac book pro and then i lost all the contents of PRAM! How do i get it back!
How can i get everything back!
-
Need to change Index tablespace from existing tablespace to new one? Do i need to rebuild the index to accomplish this? (using- Alter index <index-name> rebuild tablespace <index-tablespace>;.) Or is there any other option?
-
Hi. I've downloaded video from youtube and want to edit this video. But I can't import this video. When i select video for import, I recieve this message "After Effects warning: The File <name> could not be found". Who can help me? Thank you very muc
-
Errors "Load tModels into the registry" option & publishing proxy services
Hi, I'm making a study with BEA Aqualogic Service Bus and BEA Aqualogic Service Registry. Reading official documentation (Console Help), I added with the BEA ALSB Console two registries. But during the configuration it doesn't allow me to set the *"L