Central Inventory does not exist. Skipping central inventory check...

Still struggling in this error, i was able to install 1st instance and works fine , but i want to have Inventory for cloning practice , tried to install new instance still getting this, how to fix this, any workaround ?
[root@erp rapidwiz]# ./RapidWizVersion
Oracle Applications Rapid Install Wizard
Version 12.1.1.13
(c) Copyright 2000-2006 Oracle Corporation. All rights reserved.
Central Inventory does not exist. Skipping central inventory check...
Trying local inventory in Oracle Home...
Cannot find oraInventory

Hi,
Please let me know if you are cloning or installing.
any work around to fix that after install? You can always recreate the centrl inventory in case of corruption/deletion/did not create by rapidwiz as follows
Note 742477.1 How to create, update or rebuild the Central Inventory for R12
How to Create a Clean oraInventory in Release 12 [ID 834894.1]
or i can try re-install alsoYou do no not need to reinstall.
Please also note that from R12, rapidwiz creates local inventories which is present in each of its own ORACLE_HOMEs
Thanks
Edited by: EBSDBA on Oct 15, 2011 1:43 AM

Similar Messages

  • Central Inventory does not exist

    Running rapidwiz for R12.1.1 new installation on Linux 5.5. No other Instances installed.
    File system checks errors with the following:
    Central Inventory does not exist. Skipping central inventory check...
    Trying local inventory in Oracle Home...
    Cannot find oraInventory

    I am installing this fresh. There is nothing else on the box. Why do I have to recreate something that was never created in the first place?You never mentioned this above, and installing R12 could be part of the upgrade (that's why I have posted the docs above).
    Some of those notes say reinstall Oracle. Is it supposed to create the oraInst.loc file in /etc when I start the installer?Yes it will.
    I found a note that say's by design in R12 you do not have to run root.sh to create the oraInst.loc file. So what creates it?
    Is there a file someplace that is hidden that say's the inventory is created so don't create it when rapidwiz runs? I've run this install a few times and deleted all the files created each time. Am I missing a file?Please check the installation log files for details about the error.
    Thanks,
    Hussein

  • \OPatch\docs\etc\config\inventory" does not exist.

    Dear One,
    I have up-graded my Database 11.2.0.1 to 11.2.0.3.while applying the OPatch below error is coming...
    The specified path is not an interim Patch shiphome
    Meta-data files are missing from the patch area
    Patch location = F:\app\Administrator\product\11.2.0\dbhome_2\OPatch
    Details = PatchObject constructor: Input file "F:\app\Administrator\product\11
    .2.0\dbhome_2\OPatch\etc\config\actions" or "F:\app\Administrator\product\11.2.0
    \dbhome_2\OPatch\etc\config\inventory" does not exist.
    ApplySession::process() cannot load PatchObject: PatchObject constructor: Input
    file "F:\app\Administrator\product\11.2.0\dbhome_2\OPatch\etc\config\actions" or
    "F:\app\Administrator\product\11.2.0\dbhome_2\OPatch\etc\config\inventory" does
    not exist.
    OPatch failed: PatchObject constructor: Input file "F:\app\Administrator\product
    \11.2.0\dbhome_2\OPatch\etc\config\actions" or "F:\app\Administrator\product\11.
    2.0\dbhome_2\OPatch\etc\config\inventory" does not exist.
    Locker::release()
    Log file location: F:\app\Administrator\product\11.2.0\dbhome_2\cfgtoollogs\opat
    ch\opatch2013-01-19_14-56-18PM_1.log
    Cleaning up the directory : "F:\app\Administrator\product\11.2.0\dbhome_2\.patch
    _storage\patch_unzip"...
    OPatch failed with error code = 73
    So,pls suggest me anyone how can i proceed the OPatch apply.........

    you don't use optach to upgrade your database , Please Read the below Document That describe usage of Optach
    http://docs.oracle.com/cd/B19306_01/em.102/b16227/oui8_opatch.htm
    You Must have patch Number : 10404530 which can be downloaded from https://support.oracle.com
    Similar thread
    Upgrade 11.2.0.1 to 11.2.0.3

  • Delete aged inventory - does not delete extended hardware inventory

    Hello, I am hoping somebody can help me with customized hardware inventory
    We recently extended the hardware inventory to pull data from a registry key (hkeylocalmachine\software\asset).
    We used Sherry Kissinger's guide, and I can't thank her enough for posting it!
    http://myitforum.com/cs2/blogs/skissinger/archive/2011/07/14/configmgr2012beta2-hardware-inventory-registry-customization.aspx
    We also have a custom report based off of the extended hardware inventory.
    However, I noticed that the data for a client I deleted a few days ago is still in the database. My custom report can still pull data from SQL on it.
    I did some research here on the forums, and found out I should set a task to delete it.
    I went in to site maintenance, and set the "delete aged inventory" from 90 days to everyday, and the data is still there.
    From what I have read on these forums, it is not a good idea to go in to SQL and delete the data manually.
    I am not sure how to resolve this problem.
    Few questions I have :
    1) shouldn't deleting the SCCM client - delete the inventory from the database?
    2) are custom hardware inventory not included in the task "delete aged inventory"?
    3) is it safe to delete it from SQL server?
    Thanks in advance!

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    In CM12 data is not deleted on the fly, instead it is marked as deleted and then it will be deleted a while later. See this blog post for more details.
    http://www.enhansoft.com/blog/get-the-most-accurate-and-up-to-date-data-using-the-v_r_system_valid-sql-query-in-configuration-manager-2012
    1) see the blog post
    2) yes they are but also see the blog post.
    3) It is never safe to do this.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Sytem message 047 from work area SSFCOMPOSER does not exist

    Hi Friends,
    When I am trying to see the print preview of a PO I am getting this error msg
    "Sytem message 047 from work area SSFCOMPOSER does not exist".
    I had checked the forum and the System message was 046, but the error is not solved.
    Regards,
    Anu.

    Wrong forum to post the issue.
    VJ

  • Need urgent help :'The requested resource does not exist error'

    Hi All,
    I am getting 'The requested resource does not exist error' when trying to acess http://machinename:50000/irj
    Even when i access http://machinename:50000, i get the same 'The root directory does not exist' error. I checked in visual admin, there is no other application deployed except my application.
    Any clues? Pls help
    thanks
    bhawna

    HI ,
    Did succeed to solve your problem. I am running into same problem.
    Any help is welcome.
    Thank u very much.

  • Cannot retrieve table metadata - Table does not exist: ODP source 0WRKCNT_CATG_TEXT does not exist

    Hi, when i able to import the 0WRKCNT_CATG_TEXT extractor into source system i am getting the above bug Cannot retrieve table metadata - Table does not exist: ODP source <0WRKCNT_CATG_TEXT> does not exist, i have been checked in RSA5 T code to check the object is active or not, its active and its available in ROOSATTR table with enabled mode,but still its showing the error, can anyone help on this ..

    Hi Airings,
    'ORA-00942: table or view does not exist'
    According to the error message, it seems that the migrating table or view does not exist in the database, or SSMA does not have access to it. To troubleshoot the issue, please check the following things.
     1. Verify that if the spelling of the table or view name is correct.
     2. If the table or view exists but is in a different schema from the current schema where the SQL is executing (in other word, the table doesn’t own by you, but owned by other user), the ORA-00942 error will return too. Resolve this by
    explicitly reference the table or view by specifying the schema name (schema_name.table_name).
    3. SSMA queries some additional catalog tables that you may not have permission to, please make sure that you grant the account permission to
     read sys.mlog$. For more details, please review this similar thread:
    Bug in SSMA For Oracle 6.0 for non-dba Oracle user.
    Reference:
    ORA-00942 Table or View Does Not Exist Oracle Error
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Release strategy: Tx CL20N Error: Entry 01 does not exist in table T16FS

    Dear MM Gurus,
    I was designing new release strategy for PR and PO, so I deleted all the previous entries(SPRO) available in SAP. I created my new entries but in the transaction CL20N I got the above mentioned error: "Entry 01 does not exist in table T16FS-Check your entry" . I checked the table T16FS, where the entries were available. It also showed the previous entries I deleted from SPRO.
    Refering the SAP note 365604 (version 29, valid from 08.10.2008), I created the deleted entries again so that I could delete them in the required sequence
    1. release strategies
    2. release indicators
    3. release codes
    4. release groups
    5. class
    After deleting the entries in the above mentioned sequence also I am getting the same error in CL20N.
    I ran report RCCLZUOB, it shows the entries does not exist.
    Please help.
    Edited by: Akshay Kurhe on Mar 2, 2009 6:02 AM

    hi
    check this setting
    Distribution Using Object Classes -->Maintain Class Types & Maintain Classes

  • Caught ::EKdException in module call: The attribute SAPNotes does not exist.

    Hi,
    I am installing NW7.4, usage PI, and during the "define parameters" phase, while checking connection to the database, I get the following pop up error:
    Caught ::EKdException in module call: The attribute <SAPNotes> does not exist..
    I checked sapinst log for more meaningful entries and found the following:
    ERROR 2014-03-19 15:33:32.656
    FKD-00024  Unknown attribute SAPNotes in table tMSS_ServerParameters.
    Any ideas? OS is Windows 7, and DB is MSSQL 2012 (installed using SAP vb script provided) - pre-requisites checks were executed and I got OK's all around, including for the Windows 7 OS.
    Thanks,
    Marco

    Hello, same thing with system installtion NW 7.30 OS=2008R2 DB=SQLSERVER200R2
    see trace..
    TRACE      2014-03-25 11:17:47.819
    Copying SQL scripts from X:\nw730_installation\swpm\COMMON\INSTALL\MSS\SQL to  target...
    ERROR      2014-03-25 11:17:47.893 [kdxxcrow.hpp:112]
               lib=iakdblib
    FKD-00024  Unknown attribute SAPNotes in table tMSS_ServerParameters.
    TRACE      2014-03-25 11:17:47.898 [jsextension.hpp:141]
               JSExceptionHandler::setJSException()
    Member function 'Installer.setKdbClient()' has thrown ::EKdException. Converting to JavaScript exception EJS::EKdException.
    TRACE      2014-03-25 11:17:47.898
    Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException but already set to modlib.jslib.caughtException
    TRACE      2014-03-25 11:17:47.941 [iaxxgenimp.cpp:649]
                CGuiEngineImp::showMessageBox
    Caught ::EKdException in module call: The attribute <SAPNotes> does not exist..
    ...end of trace
    with SWPM=SWPM10SP04_8-20009707.SAR
    it works finde.
    Winfried

  • EDI 810 - Delivery note/service entry sheet does not exist

    Hello,
    When 810 Inbound Invoice IDOC is processed with two different materials having the same delivery note number using the function module IDOC_INPUT_INVOIC_MRM, the IDOC post with error code '51 Delivery note/service entry sheet does not exist'  Message class M8 Message number 183. The goods receipt has already been posted for the materials with the same delivery note number in SAP.
    Any feedback??
    Thanks

    Hi
    i had a Similar issue, where the IDOC is getting stuck with Delivery note does not exist.
    You can check Note 1063742. this may help you here. If the note does not work for you then there could be an issue with the fucntion module ME_SELECT_DOCUMENTS since it is only looking for table EKBE-VGABE. where vgabe EQ '1' OR vgabe
    EQ '6' but the delivery document no in the table is 8.
    I am guessing that this could be the issue. My Issue is still not resoved, so i thought of sharing my inputs with you.
    this may work for you.
    If this is already solved for you do let me know what has been done here.

  • Entry point 'Test Batch' does not exist

    Hi Forum
     I am in the process of upgrading one of our testsystems from TestStand version 3.1 to version 4.1.
    The system is started up by a Labview app which calls TS by a command line call (-runEntryPoint  "Test Batch"  "C:\..."). However, TS 4.1 doesn't recognize the "Test Batch" entry point (worked fine in 3.1), and I get an error box with the message "entry point 'Test Batch' does not exist". I have checked that the entry point exist in the sequence model file, and if I go to the "Execute" menu, I get the choice to run "Test Batch".
    I am able to se the -run command, but then I, for some reason, don't get the entire sequence.
    Any suggestions to what I am doing wrong? I am logged in to TS automatically with my windows login.
    B.R.
    Martin
    Solved!
    Go to Solution.

    Hi,
    There should be a document in \Conponents\NI\Models\... which should give you the basics for the various process models.
    here is some other references that may help
    http://zone.ni.com/devzone/cda/tut/p/id/7958
    http://digital.ni.com/public.nsf/allkb/D9E7A0BDDDA​2A87886256FD9007598D2
    Check out some of the related links
    http://zone.ni.com/devzone/cda/tut/p/id/3819
    Regards
    Ray Farmer
    Message Edited by Ray Farmer on 09-24-2009 11:00 AM
    Regards
    Ray Farmer

  • Error 30502: The folder ID does not exist

    When I use the Category and Perspective drop down select boxes on
    the navigation bar, I receive an error message: "Error 30502: The
    folder ID does not exist.
    I have checked. I do not have any invalid packages.
    Any ideas?

    Pls try posting in Portal > Content Area forum.

  • Error R1201 "Business partner ### does not exist" with new contact person

    Hi,
    We have configured CVI masterdata synchronization for Customer<->BP and this is working well for customer masters without contact persons.
    However, when we try to add a contact person to an existing customer (or synchronize an existing Customer with contact persons) we get the error message R1201 "Business partner ### does not exist".
    I have checked the wiki.
    We are able to manually create a Person with role BUP001 (Contact Person) and link it to the BP with relationship cat TBUR001 (Is Contact Person For). Here the synchronization BP->Customer seems to be working, as the new contact person is successfully created in the Customer.
    Any ideas why we cannot synchronize Contact Persons, Customer->BP?
    Thanks in advance,
    JJ23

    Hi James,
    may i know if you had find a solution for this.
    I have same issue.
    Thanks in advance
    Vijay

  • SAP* user does not exist

    Hi All,
         In one of my clients, SAP* does not exist but DDIC exists.
    Please tell me what can I do?
    Copy user from 000 to the client I'm working on?
    Bye

    You can just create him using SU01 and assign the required profiles (compare with client 000).
    The question is, why it does not exist.
    You can check the change documents for users and find out who did what and when.
    Nevertheless, it is not mandatory that SAP* exists on every single client of a system. As long as the value of the profile parameter login/no_automatic_sapstar is set to 1.
    If it is set to 0, you have two options: either create the user immediately with a safe password, or change the value of the above parameter from 0 to 1.
    Otherwise, your system is extremely vulnerable to attacks.
    Regards,
    Constantina

  • Asset does not exists

    Hi Sap Guru,
    When I am executing AJAB closing asset fiscal year, i got error message. From error log i found the below error.
    asset xxxxxxxx x Depreciation/updating of values has errors.
    When i checked the above asset in same company code xxxx, i found that this asset does not exist. Also I checked in the tables,  I did not find the same asset entry in table except in table ANLC,ANLP. I don't know who and how it removed from system. Now i can not perform year end closing. Could anybody tell me how to create this asset with same number or execute the year end process by excluding these assets. Thanks in advance.
    Best Regards,
    Prakash

    Dear Prakash,
    you said that there are no table entries except in table ANLC, ANLP.
    So we have 2 possibilities:
    - delete the table entries completely and create a new asset.
    - recreate the missing table entries.
    regards Bernhard

Maybe you are looking for