Central SLD Information

Hi
We have ERP, PI , BI and EP Systems out of which all are three system landscape. Can you please suggest the sld configuration for these systems. We also have a Solution Manager . Now my question is how to configure SLD in this Land scape . while installing all system i have choose configure local SLD.
While doing integration between PI and ECC , PI asked for SLD and includes ECC.
while doing EP with ECC EP there need to be created as SLD .
finally Salmon SLD configured .
here what is my central SLD ...
Thanks in Advance

Hi,
the typical config would be to use one central SLD based on your solman and connect all other systems to use this one
second good option would be to have one central SLD on solman and for all systems but have one local SLD just for PI systems (dev PI linked to DEV SLD, TEST PI to TEST SLD) and only PRD PI linked to solman's PRD SLD
this all depends on how complex your intergration landscape will be and is it allowed to connect dev system to prd (dev PI to PRD SLD) as some companies do not allow that
BTW
you can change the SLD config at any point in time - this is not any constant connection
Regards,
Michal Krawczyk

Similar Messages

Migration of local SLD to Central SLD on different host.

Hello Experts,
We have migrate the local SLD existing on the SAP PI System to a new Central SLD on a different host on SAP Solution Manager system.
I followed the OSS Note 720717, which contains the description of the changes that have to be exectued in the SAP XI/PI Environment, during the SLD Migration. This note does not give any details of the description of changes for the other SAP Systems such as SAP ECC, BI etc registered in the SLD.
Can anyone provide the OSS Notes, SAP Doc URL or the steps on how to migrate the local SLD existing on SAP XI/PI System to the new Central SLD on the SAP Solution Manager system.
Thanks for help in advance.
Best Regards,
Haleem

Firstly
I recommend to avoid having 1 SLD for multiple clients - like Solution Manager, BI, ECC
This is because clients may end up having conflicting requirements for the same SLD
- for example the small user group for Solution Manager may have a flexible and easy going policy on J2EE downtime
- but if you take down the Solution Manager J2EE that houses the SLD and PI uses this SLD - then you could have a severe affect on PI useage
Secondly
Although you can migrate content - this still does not guarantee the target landscape will work
- you may still need to manually re-implement target landscape configuration
let me give you an example
SLD 1 is being moved to SLD 2
Portal 1 is pointing to SLD 1
Even if you migrate the content of SLD 1 - including the ECC and Portal technical system landscape information
Portal 1 is still pointing to SLD 1 - this then needs to be manually re-pointed to SLD2
and that might not be all the complete steps either !
The complete steps of migration from the client side may not be available (I have found only steps to
migrate SLD content not migrate client use of the SLD)
- they may only be available as the documentation for the original configuration steps required to step SLD and the client
- therefore when migrating SLD you must go through the client setup documentation for SLD and check your
target landscape is consistent
Lastly - other considerations include
Lets say you also export model and CIM content from SLD 1 to SLD 2 - this means SLD 2 has an import line from SLD 1
- if you decomission SLD1 then you need to switch the import line which is not recommended - this could cause severe problems and may require you to create a new import line to upload content from SAP /swdc (which you need to keep the SLD bug free and latest definitions)
Just a few thoughts on issues you may encounter
Best wishes
Stuart

Connection to central SLD through out the landscape.

Dear Basis gurus,
We have installed ERP 6.0, XI, EP, BI 7.0 systems, we decided to configure central SLD in the XI system.
EP, BI systems are configured with SLD a local configuration. we need to connect them to central SLD which is there in the XI system.
I would be greatful to you , if you can provide any guidance how to connect local SLDs which is there in BI, EP to the XI SLD.
Thanks and Regards
Purna.

From the ABAP backend systems go to RZ70 and specify the Host and Service of the PI system in the section SLD Bridge
Once done your schedule the Data collection using the execute button
For the JAVA part
Open Visual Admin from the backend systems
Go to Server0->Services->SLD Datasupplier
You supplied all the required info like "Hostname " portname etc.
After giving all this information , try to initiate a Data transfer using the icon there(above the runtime tab) its like a arrow pointing downwards.
After clicking on that icon wait for sometime and see whether you get the message "Data transfered sucessfully"
Gerard

Instalation help Central SLD parameters connection

Hi Dear All,
I am installing solman 4.0 SR1 on Windows 2003 and Microsoft SQL.
during the instalation i got a screen which iam not aware of please help me
The scren says :
SELF REGISTRATION OF JAVA ENGINE in CENTRAL SLD:
SLD HTTP HOST -
SLD HTTP PORT -
SLDDATA SUPPLIER USER: SLDDSUSER
PASSWORD:
SELF REGISTRATION OF ABAP ENGINE IN CENTRAL SLD
SLD GATEWAY HOST: -
SLD GATEWAY INSTANCE NUMBER: -
COMMUNICATION WITH CENTRAL SLD:
SLD ABAP API USER: SLDAPIUSER
PASSWORD:
Please help what i have to choose and where i can find the relavent information.
kind regards,
Vamsi.

Hi,
For SLD configuration during installation,
SLD HTTP HOST - can be any name need not be your computer name. E.g <SID>SLD or <SID>SLDSRV or something like that.
SLD HTTP PORT - the port would be 50<instancenumber>00
eg:- 500100 where 01 is instance number.
as SLDDATA SUPPLIER USER and SLD ABAP API USER are automatically populated. just maintain your password.
That's it.
This will solve your problem. Feel free to revert back.
--Ragu

How to sync local SLDs to Central SLD.

Hi,
Suppose i have a central SLD system A. and several local SLD system B, C, D...
i want to sync all thoese local SLD information into the central SLD. But i don't know how to create data suppliers and corresponding configuration.
Who can give me some steps about how to do it.
Thanks,
Johnney.

hi Johney..
Check this links..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/29b1f3ea-0c01-0010-2dae-cc64bb381c97
http://help.sap.com/saphelp_nw04s/helpdata/en/44/7716e1633a12d1e10000000a422035/content.htm
http://www.informatik.uni-hamburg.de/SWT/attachments/LVTermine/TheJavaDevelopmentInfrastructure-Part2-AutomatedBuildandChangeManagement.pdf
URs GS

Product SCM 5.0 in Central SLD Software Catalog

Hi,
I've an installation of NW 2004s, SCM 5.0 and a Solution Manager that is doing of central SLD. I have perform the post installations steps for SCM but I'm not seeing the product SCM 5.0 in the Software Catalog when selecting Software Type "Product" on the central SLD, I just see SCM 4.1.
When selecting Software Type "Software Components" in the Software Catalog screen, there is a software component SAP SCM that has version SAP SCM 5.0.
Why it doesn't show the product for SAP SCM 5.0?
Many thanks.
Rodrigo.

You have to update your CIM file on the Server
SLD content has been updated from time to time.
You can download the most up-to-date files from the SAP Service Marketplace. See SAP Note
669669 for details information.
Procedure for importing the data is
1. Choose Content --> Import. The browser displays the Import Selection screen.
2. Next to the Import File field, choose Browse.
3. To import the component information data, navigate to the following file:
<server>\usr\sap\<SAPSID>\SYS\global\sld\model\cr_content.zip (Microsoft
Windows) and then choose Open.
Objects that already exist in the system are automatically overwritten.
4. If you do not want to import the instances into the current namespace, you can change the namespace.
5. Choose Import.
Gaurav Jain

Need Suggestion on Central SLD System

Hi Experts,
I need a help/ suggestion on deciding the Central SLD system in our landscape. In our current SAP System landscape we do not have XI Servers for Central SLD, So we are using Solution Manager 7.01 as the Central SLD for the new Installations and including the old Systems too. But We came to know that SAP does not recommend using Solution Manager as the productive SLD System.
So we have stopped the process of including old systems to Solution Manager now and we decided to build the system for central SLD which is recommended by SAP. So please suggest me which system is more recommended by SAP like EP/ ECC/ NW or any other.
Thanks.

Hello Ajay,
you posted the question on wrong forum.
This forum is for sap business one.
Post your thread on appropriate forum to get the replies.
*Close this thread.
Thanks,
Neetu

Pi 7.1 Central SLD

I have installed PI 7.1 and will use it as central SLD. I am installing SCM 2007, ECC Oil and Gas and BI 7.0 and want to point these systems to the central SLD in PI system.
During the install the WAS 7.0 system use SLDDSUSER however there is no user like this on PI 7.1.
SCM 2007 install had as default SLDDSUSER but that user doesn't exist in the PI 7.1 install.
I check SAP notes and can't find nay notes regading this change.
I did find an account that is close to this SLD_DS_DS1 where DS1 is the SID.
Has anyone ran into this issue with WAS 70 and WAS 71 installations? Is it safe to select SLD_DS_SID as the correct one for hooking in my other component systems into the Central SLD on PI 71?
Thanks
Mikie Brogan

We have the same situation. Can you explain How?
Thank you
Raj GA

PI 7.1 and central SLD

Hello, colleagues.
We have already central SLD based on SAP Solution Manager (SM+ERP systems). Now we plan to setup PI 7.1 (three-system configuration).
Should we include PI-systems in the central SLD or organize second separate SLD for PI-systems?
We have some doubts about it and cannot yet make right decision.
Can we hear your suggestions of this matter?

Hi,
Personally I recommand to have at least two SLD for PI systems: one for PI prod, and another for PI non-prod (dev, Qua, Pre-prod). As your current SLD is linked to ERP, I presume it has a high criticity, so for me I think you can use it for your PI prod.
Or you can have only one central SLD (yours) which populate the local SLD of each PI, by synchronization.
with SLD, there are several choices, but keep in mind that for the SLD of PI prod, it should have a "hight" criticity. If its SLD is shut down, PI can work only during several minutes without SLD info... thanks to its SLD cache, but after that PI exchanges are down.
Regards.
Mickael

Not Updating in Central SLD

Hello,
Upon performing our daily system checks, one of the item is to monitor the sending of SLD data of the installed systems in the System Landscape to the Central SLD which in our case is the XI box. Four of our systems having Java stack did not update. With that, i performed the necessary steps to trigger it so that it'll update in both Web AS ABAP and Web AS Java. With regards to ABAP, i triggered and activated the system to collect and send SLD data via RZ70. As for the Java Systems, i triggered and activated it in the SLD Data Supplier in the visual admin. I performed the CIMOM test and it was a success. Furthermore, i've triggered the send SLD data. In order to check whether it worked or not, i've checked the respective local SLDs of the systems and viewed that it is updated there for both ABAP and JAVA. Furthermore, i've checked the system landscape and viewed the systems are updated for both ABAP and JAVA except for our APO system, both ABAP and JAVA as well. As another step, i reconfigured the Data supplier in the administration of the SLD of APO in order to make sure that the password of xisuper is correct or something. However, until now, it has yet to be updated.
Hope you could help me.
Thanks so much!

Have you checked the Log on the receiving and sending SLDs to see of there is an error?

Adapter monitoring with central SLD!

Hi ,
we have central SLD in our landscape(different host from XI server),and our basis guys installed PI7.0 SP12.And AE is local as I can see under Integration server.
I can see JPR in adapter in adapter monitoring.
I have question here!
should it needs to show all the list of adapters (FILE,JDBC,JMS,SOAP etc)in adapter monitoring in RWB?does it vary,if sld is central or local ?
what is the ideal way.
thank you,
babu

where the adapter engine should appear in RWB under integration server or under non central adapter engine if we have installed central AE and central SLD?
Under Component monitoring -> Integration server -> Adapter Engine
and it has show all the adapters when we install central AE and with central SLD when we furthur click the show all adapters?
As i mentioned above, u may view all the adapters after clicking
Adapter Engine -> Adapter Monitoring
or is it changed since PI 7.0 to cummunication channel monitoring and no adapter monitoring?
Yes. Now the monitoring of adapters r much intensively done by Communication Channel Monitoring
Regards,
Prateek

Access Central SLD Error

Hi Experts,
We are using the SLD SOLMAN and we and the ideia is to use it as Central SLD. In order to allowed PI indentifed the Central SLD we must appllied few oss notes like; 939592, 768148 and 720717, but much as we try it to import we got few errors as describe below:
"Unable to read software component versions from System Landscape Directory "ASPTSSM01:50000"
Another error occurs when trying to access the SLD by the runtime workbench:
"Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)"
Anybody help-me.
Regards,
HMattos.

Hi HMattos,
I hope you have created the PI service users in SOLMAN and assigned the same password as the PI service user password.
Open /rep on your PI and click SLD. Check if it opens the SOLMAN page.
Check in VA if SLD data supplier test works fine.
Check SLDCHECK transaction.
If you get errors in any of these, the you will get a hint as to where is the issue. If you unable to resolve, then post the results of the above.
Cheers....,
Raghu.

Central SLD

I try to import SW Component Version into Repository from Central SLD, System gives me the messagebelow:
Unable to read software component versions from System Landscape Directory "brckxiprd.internal.borusan.com:50000"
What must I do to fix this problem?
thanks.

hello cemil,
Check out these note :
Note 720198 - Integration Repository cannot access SLD
Note 836093 - IFR: Updating the application components => error
It may help you out....
regards
Prasad

Moving Central SLD from XI Development to XI Production ?

Hi,
Please advise what is the impact of changing Central SLD from XI Development to XI Production Server.
Because during initial installation the XI production still not available so our Basis only install SLD in our XI development server and other SAP development like FI, BW also pointing to this SLD.
now the XI production is ready. could i just install new SLD in production and changes all connection from
dev to prod ?
Please advise on the step that i have to do.
Thank you and best Regards
Fernand

Hi,
http://www.riyaz.net/blog/index.php/2008/05/28/xipi-step-by-step-guide-to-xi-transports-using-cms-part-i/
http://www.riyaz.net/blog/index.php/2008/05/28/xipi-step-by-step-guide-to-xi-transports-using-cms-part-ii/
http://www.riyaz.net/blog/index.php/2008/05/29/xipi-step-by-step-guide-to-xi-transports-using-cms-part-iii/
Refer this article
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b01876ac-abbb-2a10-788e-95a7c5a5aeca
Regards,
Suryanarayana

How to link XI-Development to the central SLD on XI-Production?

Hi,
we have a two systems landscape with XI-DEV and XI-PROD.
So far, we have used the SLD on XI-DEV.
Now we want to use one central SLD that is running on XI-PROD for all developments on XI-DEV.
What is necessary to to that (any documentation available?
1. First we have done an export/import to copy all technical and business systems to the central SLD.
2. Then we have set the following parameters in the exchange profile (Section Connections) of XI-DEV:
 com.sap.aii.connect.cr.name: Host of XI-PROD
 com.sap.aii.connect.cr.httpport: Port of XI-PROD
 com.sap.aii.connect.landscape.name: Host XI-PROD
 com.sap.aii.connect.landscape.httpport: Port XI-PROD SLD
3. Now we have done an SLD data cache cleanup.
4. TEST: I have created a new business system in the SDL (XI-PROD) to check, if this business system is available in the integration builder on XI-DEV. If i try to assign a new business system, I got the error message:Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed.
Also i get the error: "No connection to SLD" if i try to compare the adapter-specific entries of a business system with the SLD.
What is the reason? What steps are missing?
Do i need to maintain transactions like LCRSERVADDR (server address of landscape directory?) and SLDAPICUST or anything else??
Thanks for any help!

Chris,
Follow the OSS Notes
720717: Reduce the number of System Landscape Direcotries (SLD) &
768148: Using a separate SLD for XI
This should solve your problem.
regards
Shravan

Central SLD Information

Similar Messages

Maybe you are looking for