Adapter monitoring with central SLD!

Hi ,
we have central SLD in our landscape(different host from XI server),and our basis guys installed PI7.0 SP12.And AE is local as I can see under Integration server.
I can see JPR in adapter in adapter monitoring.
I have question here!
should it needs to show all the list of adapters (FILE,JDBC,JMS,SOAP etc)in adapter monitoring in RWB?does it vary,if sld is central or local ?
what is the ideal way.
thank you,
babu

where the adapter engine should appear in RWB under integration server or under non central adapter engine if we have installed central AE and central SLD?
Under Component monitoring -> Integration server -> Adapter Engine
and it has show all the adapters when we install central AE and with central SLD when we furthur click the show all adapters?
As i mentioned above, u may view all the adapters after clicking
Adapter Engine -> Adapter Monitoring
or is it changed since PI 7.0 to cummunication channel monitoring and no adapter monitoring?
Yes. Now the monitoring of adapters r much intensively done by Communication Channel Monitoring
Regards,
Prateek

Similar Messages

Adapter Monitoring with CCMS

Hi,
is there anybody who already set up an adapter monitoring with CCMS using the alert framework of Runtime Workbench ?
Background:
When using the existing MTE's in CCMS (J2EE Monitor Templates - All Systems - <SID> - J2EE Applications - SAP XI Adapter Engine) only rare monitoring information related to XI messages are posted.
What I would like to see are information about the adapters provided in the logfiles of each adapter.
For example as soon there's a permission problem for a directory in File Adapter an alert in CCMS should be raised.
I already checked SAP notes 870232, 913858 and 824039.
Any feedback appreciated.
Cheers,
Juergen

Hi,
You can configure the CCMS as per the following two blogs,
Part 1: /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Part 2: /people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Configure the Alert Framework with the below Blog as reference,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Then forward the Alerts created in the CCMS to Alert Frame work, the required steps are given in the below help links.
http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/30/62e77b2f4865488a866d4103923a93/frameset.htm
Then any alerts that gets generated in CCMS can be passed to the Alert Category kept configured in the Alert Framework.
Hope this helps you

Adapter Monitor---Status of SLD access

Hi All,
Could you please help me out in this ?
In Adapter Monitor,
The status of SLD access is RED and TEXT is as follows.
SLD host:port = starxi:50000
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for SXI.SystemHome.starxi found
No access to get JPR configuration
How to rectify this error ?
Thanks,
Ram

Dear Ram,
This might solve the issue,
a)Start transaction SXI_CACHE.
b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
If you still face issue try this .
Many actions require to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason that we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Regards
Agasthuri Doss

XI installation with central SLD

Hello,
I have installed solution manger to generate key for XI installation. But, when i in stall solution manager, it installed MaxDB and local SLD and also i think WEBAS ABAP. After that i generated the key.
And, I am installing XI on the same host. There is no configuration as such i did.I tried to use the same solution manger DB, but i t failed. So i started with New DB creation. And central SLD........
Is there any configurations that i need to do to install XI with our any errors.
When i used existing SLD, is there any configuration i have to do.
More important, i have to install solution manager and XI on same host
Can anybody any issues here.
Please advice,
Srini

This should be straight forward.
If the SLD is set up for Sol Man, you enter these details on the in the installation wizard.
You will need seperate SIDs and you will need to assign the Virtual host names for each installation.
You will need to check the SLD config after install. the two sm59 conenctions - LCRSAPRFC & SAPSLDAPI, the sldapicust, the JCo Connections in Visual Admin and the SLD Data Supplier in Visual ADmin.

Plain Http adapter Monitoring with CCMS / Alerting framework

Hello all,
Can you explain me the optimal way to monitor process using plain http adapter (Sender AND Receiver).
My goal is to push issue information as soon as possible to monitoring team (via CCMS) when the process is in error.
During my tests, I ve had a lot of messages with ICM HTTP error 110 but Integration engine did not trigger any alert.
Thanks for your help.

Hi,
Check this link for ICF trace.
http://help.sap.com/saphelp_webas620/helpdata/en/2d/64d041e74911d6b2e400508b6b8a93/content.htm
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
regards
Aashish Sinha
PS : reward points if helpful

Local SLD not updating a central SLD

Hi,
In my company landscape, I have
SolMan7.1 with Central SLD (Let's call this SLDA)
Portal 7.02 with local SLD (Let's call this SLDB)
ECC6
Both the Portal and ECC systems are updating SLDB, so I can see both technical systems in SLDB.
SolMan is updating SLDA, so I can see SolMan technical system in SLDA.
I linked SLDB to SLDA via
From SLDB> administration> data suppliers --> add SLDA
For this setting, I use the user SLDDSUSER, which have a role LcrInstanceWriterAll.
The problem now is SLDA does not get the data from SLDB. In SLDA, I see only the SolMan Technical System.
How often does SLDB update SLDA? Can we manually trigger an update SLDB->SDLA?
How can we troubleshoot the SLDB -> SLDA update?
What else needs to be configured other than "From SLDB> administration> data suppliers --> add SLDA" ?
Thanks
Edited by: Nick Foo on Sep 27, 2011 3:53 AM

Hi Sunny,
yes I have done those steps. Very short and easy setup steps to link to another SLD.
OK, just one thing to confirm here.
After Add SLD, the SLD URL syntax should be http://host:port correct?
I have tried all sorts of entires for the URL
http://host:port
http://host:port/sld
http://host:port/
All not working
Checked the user, user is ok, even tried giving the user Administrator role and still not working

Instalation help Central SLD parameters connection

Hi Dear All,
I am installing solman 4.0 SR1 on Windows 2003 and Microsoft SQL.
during the instalation i got a screen which iam not aware of please help me
The scren says :
SELF REGISTRATION OF JAVA ENGINE in CENTRAL SLD:
SLD HTTP HOST -
SLD HTTP PORT -
SLDDATA SUPPLIER USER: SLDDSUSER
PASSWORD:
SELF REGISTRATION OF ABAP ENGINE IN CENTRAL SLD
SLD GATEWAY HOST: -
SLD GATEWAY INSTANCE NUMBER: -
COMMUNICATION WITH CENTRAL SLD:
SLD ABAP API USER: SLDAPIUSER
PASSWORD:
Please help what i have to choose and where i can find the relavent information.
kind regards,
Vamsi.

Hi,
For SLD configuration during installation,
SLD HTTP HOST - can be any name need not be your computer name. E.g <SID>SLD or <SID>SLDSRV or something like that.
SLD HTTP PORT - the port would be 50<instancenumber>00
eg:- 500100 where 01 is instance number.
as SLDDATA SUPPLIER USER and SLD ABAP API USER are automatically populated. just maintain your password.
That's it.
This will solve your problem. Feel free to revert back.
--Ragu

Switching from central SLD to local SLD

Hello,
i have installed BI Java with central sld.
Could I switch back from cetral sld to local sld?
I didn't find any documentation or posts.
Thanks,
Sabrina

Hi,
Yes you can change the SLD configuration from local to central or a vice versa...
Please check the following SAP Note for your reference
Note 720717 - Reduce the number of System Landscape Directories (SLD)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/29b1f3ea-0c01-0010-2dae-cc64bb381c97
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e5e7cc9b-0501-0010-adb2-ffbe7f1f7e6f
Hope this helps,
Regards
CSM Reddy

Central SLD/Local SLD

Hello All,
Is there limitation with central SLD over Local SLD?.
To deploy Webdynpro applications (Mobile) please let me know if there are any limitations
Thanks

Hello.
SLD architecture is a long discussion
There are different views on how to set up SLD's.
In my oppinion, the limitations of SLD is that it's a central component to a growing number of netweaver component.
Right now, the portal, webdynpro, xi, nwdi wouldn't work very well without the SLD.
Considering this there is aspects on how to set up the SLD's. Usually critical systems have a local SLD, with supplyer briges to central SLD's.
You would have a separate SLD landscape for Production servers, since they usually run on different SLA (service level agreements).
If you're using NWDI, it's usually a good place to have you're central SLD.
If you're running a smaller landscape, go for the local SLD only and don't complicate your landscape too much.
Check this document (about last slide) with different SLD scenarios. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/204994f3-0e44-2a10-17b3-808fbd8db4aa
Regards, Mikael Löwgren

Syncronizing two Solutions Manager with One SLD

Hello Experts, we have this issue: I am having one Central SLD in PI and one productive Solution Manager (new one) that is pointing to that SLD, for incidents we are managing another ¨productive¨Solution Manager (old one) . There is a new system that I need it in my SMSY in my old Solution Manager and the best way to do it would be to point that old Solman to the same SLD that the new one is pointing. my question is: I only have to set the SLD in the old solution manager in the RZ70 and add that Solution Manager in the Central SLD?, so I would end with two solution manager pointing the same Central SLD, it doesnt mess with my new productive Solution Manager SMSY?, I want to be sure that some trash data in the old Solution Manager wont be present in the new Solman that is pointing the Central SLD right now.
Best Regards,
Paul

Dear Mr. Paul,
There are few things to understand:
1. RZ70 is used to feed SLD with system information.
2. landscape fetch job need to be scheduled within Solution manager system to update SMSY with the latest information available in SLD which you have configured during SOLMAN_SETUP.
Here with your description it is clear that you have central SLD at your PI system and your both Solution manager system ( New and Old) are connected to the central SLD.
Here what I understand if you want to add a new system say X in SMSY of your old solution manager.
In order to do so you need to configure your new system to the central SLD using RZ70. Once you did this, system details of your new system would be available with central SLD.
Now in next step to make that system available to your old solution manager, you need to rerun the smsy_setup job. This will referesh your SMSY and new system would be available in SMSY of your OLD solution manager.
In this case there is a catch. Since you have added the system to the central SLD, the new system X would also appears in the SMSY of your new Solution Manager as well once SMSY of new solman gets refreshed.
So if you just want to add this new system X to SMSY of your old solution manager only and not to the new one, you can add this system to the local SLD of old solution manager only not to the central SLD.
Also you need not to worry about the trash data available in your Old solution manager. It would not effect the central SLD if your local SLD of old solution manager is not synch with central SLD.
Regards,
Sachin

Error with JPR(Java Proxy Runtime) in Adapter Monitor of RWB

Dear Experts,
             I am implementing scenario with Client Java Proxy(Outbound) and Server ABAP Proxy(Inbound). We have done all the designing in IR and configurations in ID. We have deployed the EAR successfully. But when we go to RWB(Runtime Work Bench) to monitor the inital status of JPR in RWB->Adapter Monitor. It shows the following error.
Status     Name                                Text
Error        SLD Access                     SLD host:port = yhsapi01.yashsap.com:50000
Error getting JPR configuration from SLD. Exception: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=yhsapi01 SYSNR=00 GWHOST=yhsapi01 GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Wed Jun 03 19:42:45 200
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic.c
LINE 10713
COUNTER 5521
No access to get JPR configuration

Hi!
Obviously there are more than 100 connections opened in your system.
ERROR max no of 100 conversations exceeded
Please check your gateway settings (in ABAP you can check the parameters using transaction SMGW).
Regards,
Volker

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I found that the Thunderbolt input accepts the mini-DVI (in my case converter to VGA for a tutorial use monitor)
BUT, you have to really oush it in 'til it clicks. I thought it too loose until I tried it. works just fine!!
i get a solved for my own LOL
Ed

Non central adapter engine & adapter monitoring

Hi ,
we installed PI7.0 sp12,and can we see all the available adapter as a list in RWB and adapter monitoring if adapter engine installed as non central?
And we will see Adapter engine under Integration server if AE is centran and under non-central adapter engine if AE is non central ,right?
thank you,
Babu

I could see both Communication Channel monitoring as well as Adapter monitoring.
but once I click adapter monitoring I could see only JPR but not any other adapters.if I click CC monitoring there are no CC cos we havent created any yet.
I am asking like,if we see only JPR in adapter monitoring not any other adapter ,is that a error while doing the installation and configurations? or is that ok?
thank you for your reply.
Babu

Issue with AS2 Adapter monitoring

Hi All,
I am using Seeburger AS2 Adapter in our XI project we are able to post and retrieve
messages through AS2 communication,but we are facing the problem of monitoring the messages if any incoming messages failed in the AS2 adapter only due to some network failure or some other issue we are not able to track which message is failed and what payload it contains as in Adapter Monitoring or communication channel monitoring AS2 Adapter shows the only "Failed Session"
Do we have any application to monitor it in XI.
Regards
Gaurav

Hi Gaurav,
Have you tried Tcode SXMB_MONI . In this by giving some details about your scenario, it will give you the information about all the messages which are successful or not. Here you can see the payload af successful messages and error in failed message by clicking on the perticular message.
hope this will help.
regards
HONEY

Communication channel monitoring, adapter monitoring error

Hi ,
I am using SAP PI 7.0 with HP-UX.
Here we have 6 logical hosts in one physical host.
Physical host name is u2013 xyz
Integration server name u2013 sappid
The Central SLD: sappid
URL for sappid: sappid: 50300
When I monitoring RWB----
>communication channel monitoring, adapter monitoring, in Development system It's detecting another logical host ( like www://sapard:50300 ) and getting page cannot find error.
1.SLDCHECK
   http://xyz:50300/sld
   host name: xyz
port number: 50300
user : SLDDSUSER
2.SXMB_IFR
   http://xyz:50300/rep/start/index.jsp
3.SMICM
   icm/server_port_0 = PROT=HTTP,PORT=8003
   icm/server_port_1 = PROT=SMTP,PORT=0
   icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
   icm/host_name_full = sappid
4. SLDAPICUST
    SAP_CONFIG   1   xyz   50300   SLDDSUSER
5. SXMB_ADMIN
    Role of Business System Integration Server
    Corresponding Integ. Server http://sappid:8003/sap/xi/engine?type=entry
   Integration Engine Configuration Data -> Check button
6.When I opened the http://xyz:50300/rep/start/index.jsp I got the
XI start page.
    when I opened the http://sappid.AIG.com:50300/
   the page not found issue, when I opened http://sappid:50300/ I got the
   XI start page.
plz help me for this issue.
thanks in advance.
regards,
reddy.

Hello,
I think the FQDN is not set properly.
Problem in the parameter
SMICM
icm/server_port_0 = PROT=HTTP,PORT=8003
icm/server_port_1 = PROT=SMTP,PORT=0
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
*icm/host_name_full = sappid *
Replace this parameter in instance profile
icm/host_name_full = sappid.AIG.com
Then in the host entry of your server please add an entry
172.18.23.233(ip your ur Xi server)       sappid.AIG.com
Then let us know the result.
Thanks and Regards
Vijay

Adapter monitoring with central SLD!

Similar Messages

Maybe you are looking for