Certificate and Image Issue
Hi All,
I have previously been a user of captivate 4 and have just downloaded the trial of captivate 6 at my new place of work with a view to investing in it for our e-learning going forward.
I have written a small trial module and have a couple of issues - have googled etc but cannot find the answer so here goes....
Certificate - in captivate 4 i was able to insert the certifcate widget and it would pull the name of the learner through from a variable V_Name. I have tried this in v6 and it does not bring the name onto the certificate - ive used V_Name and just tried User_Name as variables but still no name appears on the certifate.
I have also tried to get it too display the name of my module in the 'has taken the course' section of the certifcate - in captivate 4 i manually entered that onto the widget in the cert slide which worked fine - in v6 that is not an option... i have added a variable with the name of the module but that has not worked. - any ideas would be welcome...
Also,
Images as Red Boxes
I have a problem with some of my images showing as red boxes on the published scorm package when it is played back through moodle. We've run it on 2 pcs on the network with the same issue - flash player is v10 and im publishing it in flash player 10. These images work absolutely fine on my mac in preview mode. Very strange. Also, I have some of the images which are red boxes in the main slideshow but appear absolutely fine on a question slide?? Again any ideas would be much appreciated.
Hi Lilybiri.
Thanks for the reply.
I tried the variable v_Name (lowercase v) and that has worked for the certifcate - still not too sure how to get the course name populated?
The images are mainly jpegs and png's and bitmaps. I just checked the slide quality and it was on low 8 bit - so have changed that. Cant see an option for transparency...I'll try it with the slide quality changed and see what happens.
Whilst you're about - can you help with a question about text entry boxes please? I've set up a TEB at the beginning for the learner to type in their learning objectives - the key things that they want to get from the module. I made 3 TEBs so that they could write a max of 3 objectives. I've associated the TEB with the following $$TTextEntryItem1Var$$ but it only displays around 13 characters of text?
Thanks,
Alex
Similar Messages
-
Config certificate and log issues
I config certificate and use it to connect ipsec vpn , I just config
jinan-neusoft(config)#ip domain-name neusoft.com
jinan-neusoft(config)#crypto key generate rsa general-keys
The name for the keys will be: jinan-neusoft.neusoft.com
Choose the size of the key modulus in the range of 360 to 4096 for your
General Purpose Keys. Choosing a key modulus greater than 512 may take
a few minutes.
How many bits in the modulus [512]:
% Generating 512 bit RSA keys, keys will be non-exportable...
[OK] (elapsed time was 0 seconds)
jinan-neusoft(config)#
Nov 16 01:05:44.435: RSA key size needs to be atleast 768 bits for ssh version 2
jinan-neusoft(config)#
Nov 16 01:05:44.435: %SSH-5-ENABLED: SSH 1.5 has been enabled
jinan-neusoft(config)#crypto pki trustpoint CA1
jinan-neusoft(ca-trustpoint)# enrollment url http://59.44.43.217:80
jinan-neusoft(ca-trustpoint)# revocation-check crl
jinan-neusoft(ca-trustpoint)# rsakeypair DMVPN-SY-KEY
jinan-neusoft(ca-trustpoint)# auto-enrol
jinan-neusoft(config)#crypto pki authenticate CA1
Certificate has the following attributes:
Fingerprint MD5: D5F9D56B 4D9A4260 43F21D39 811D7AD5
Fingerprint SHA1: 1E49B228 DD57F4DB 43DD2C2F 03870C18 840DA12A
% Do you accept this certificate? [yes/no]: y
Trustpoint CA certificate accepted.
then I have log issues like below ,even I config auto-enroll , I don t get certificate pending information from my certificate server ,
my device is C3925 and ios is c3900-universalk9-mz.SPA.151-4.M4.bin ,how to deal with it ,top players , THX~~~~
Nov 16 01:07:54.871: %PKI-6-CERTRENEWAUTO: Renewing the router certificate for trustpoint CA1
Nov 16 01:07:54.951: %CRYPTO-6-AUTOGEN: Generated new 512 bit key pair
Nov 16 01:07:55.115: CRYPTO_PKI: Certificate Request Fingerprint MD5: 939AF8C1 854DDA90 8FE03058 5635468F
Nov 16 01:07:55.115: CRYPTO_PKI: Certificate Request Fingerprint SHA1: 50F869D2 C0814317 7EB2ECC9 90461F3A 353E7089
Nov 16 01:07:55.119: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Traceback= 5564384z 68B3034z 945A8D0z 6D05DF0z 6
jinan-neusoft(config)#D05F70z 6D06B50z 6D07268z 6D43018z 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z 4127784z
Nov 16 01:07:55.119: %SYS-2-MALLOCFAIL: Memory allocation of 40 bytes failed from 0x6D05DEC, alignment 0
Pool: Processor Free: 731143916 Cause: Interrupt level allocation
Alternate Pool: None Free: 0 Cause: Interrupt level allocation
-Process= "<interrupt level>", ipl= 3
-Traceback= 5564384z 6892328z 68B3064z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D43018z 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z
Nov 16 01:07:55.119: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Traceback= 5564384z 68B3034z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D4308Cz 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z 4127784z
jinan-neusoft(config)#
Nov 16 01:08:09.719: %PKI-6-CERTRENEWAUTO: Renewing the router certificate for trustpoint CA1
Nov 16 01:08:09.879: CRYPTO_PKI: Certificate Request Fingerprint MD5: 939AF8C1 854DDA90 8FE03058 5635468F
Nov 16 01:08:09.879: CRYPTO_PKI: Certificate Request Fingerprint SHA1: 50F869D2 C0814317 7EB2ECC9 90461F3A 353E7089
jinan-neusoft(config)#
Nov 16 01:08:09.883: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Traceback= 5564384z 68B3034z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D43018z 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z 4127784z
Nov 16 01:08:09.883: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Traceback= 5564384z 68B3034z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D4308Cz 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z 4127784z
jinan-neusoft(config)# Nov 16 01:07:54.871: %PKI-6-CERTRENEWAUTO: Renewing the router certificate for trustpoint CA1
Nov 16 01:07:54.951: %CRYPTO-6-AUTOGEN: Generated new 512 bit key pair
Nov 16 01:07:55.115: CRYPTO_PKI: Certificate Request Fingerprint MD5: 939AF8C1 854DDA90 8FE03058 5635468F
Nov 16 01:07:55.115: CRYPTO_PKI: Certificate Request Fingerprint SHA1: 50F869D2 C0814317 7EB2ECC9 90461F3A 353E7089
Nov 16 01:07:55.119: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Traceback= 5564384z 68B3034z 945A8D0z 6D05DF0z 6
jinan-neusoft(config)#D05F70z 6D06B50z 6D07268z 6D43018z 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z 4127784z
Nov 16 01:07:55.119: %SYS-2-MALLOCFAIL: Memory allocation of 40 bytes failed from 0x6D05DEC, alignment 0
Pool: Processor Free: 731143916 Cause: Interrupt level allocation
Alternate Pool: None Free: 0 Cause: Interrupt level allocation
-Process= "<interrupt level>", ipl= 3
-Traceback= 5564384z 6892328z 68B3064z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D43018z 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z
Nov 16 01:07:55.119: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Traceback= 5564384z 68B3034z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D4308Cz 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z 4127784z
jinan-neusoft(config)#
Nov 16 01:08:09.719: %PKI-6-CERTRENEWAUTO: Renewing the router certificate for trustpoint CA1
Nov 16 01:08:09.879: CRYPTO_PKI: Certificate Request Fingerprint MD5: 939AF8C1 854DDA90 8FE03058 5635468F
Nov 16 01:08:09.879: CRYPTO_PKI: Certificate Request Fingerprint SHA1: 50F869D2 C0814317 7EB2ECC9 90461F3A 353E7089
jinan-neusoft(config)#
Nov 16 01:08:09.883: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Traceback= 5564384z 68B3034z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D43018z 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z 4127784z
Nov 16 01:08:09.883: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Traceback= 5564384z 68B3034z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D4308Cz 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z 4127784z
jinan-neusoft(config)#I do not have the answer but have exactly the same issue, looks as if it is a bug of some kind :
Cisco CISCO3945-CHASSIS (revision 1.0) with C3900-SPE150/K9 with 980992K/67584K bytes of memory.
Processor board ID FCZ163371P3
6 FastEthernet interfaces
3 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 72 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
System image file is "flash0:c3900-universalk9-mz.SPA.151-4.M4.bin"
Nov 16 07:37:16.611: CRYPTO_PKI: Signature Certificate Request Fingerprint MD5: 358FF778 7C2E66AE 895BF088 BF022442
.Nov 16 07:37:16.615: CRYPTO_PKI: Signature Certificate Request Fingerprint SHA1: 5F7A4300 20B62132 83D08C6E 2D315DF4 51EFE94D
.Nov 16 07:37:16.623: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Traceback= 5564384z 68B3034z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D4308Cz 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z 412
7784z
.Nov 16 07:37:16.623: %SYS-2-MALLOCFAIL: Memory allocation of 72 bytes failed from 0x6D05DEC, alignment 0
Pool: Processor Free: 704933204 Cause: Interrupt level allocation
Alternate Pool: None Free: 0 Cause: Interrupt level allocation
-Process= "", ipl= 3
-Traceback= 5564384z 6892328z 68B3064z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D4308Cz 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4AC
B9F4z Nov 16 07:37:16.611: CRYPTO_PKI: Signature Certificate Request Fingerprint MD5: 358FF778 7C2E66AE 895BF088 BF022442
.Nov 16 07:37:16.615: CRYPTO_PKI: Signature Certificate Request Fingerprint SHA1: 5F7A4300 20B62132 83D08C6E 2D315DF4 51EFE94D
.Nov 16 07:37:16.623: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Traceback= 5564384z 68B3034z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D4308Cz 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4ACB9F4z 412
7784z
.Nov 16 07:37:16.623: %SYS-2-MALLOCFAIL: Memory allocation of 72 bytes failed from 0x6D05DEC, alignment 0
Pool: Processor Free: 704933204 Cause: Interrupt level allocation
Alternate Pool: None Free: 0 Cause: Interrupt level allocation
-Process= "", ipl= 3
-Traceback= 5564384z 6892328z 68B3064z 945A8D0z 6D05DF0z 6D05F70z 6D06B50z 6D07268z 6D4308Cz 6D25044z 6D1988Cz 6D4CCE0z 91F0154z 91F0CC4z 91F0DA4z 4AC
B9F4z -
Thumbnail and image issues iPhoto 'o8 & Leopard
I installed iLife '08 a few weeks ago and then installed Leopard on the day it was released. I have recently imported a few high-res images (adjusted in Photoshop CS2) and some of them are listed in my iPhoto library but I can not see the photos. I simply get a black thumbnail and when I double click the image it does not appear in the separate window. I can see the image when I go to make a slideshow, but I can see the image when viewing it in the folder or event. Any idea what the issues are?
Thanks,
MarkMark
Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
Regards
TD -
DPS App Builder - certificates and account issue
Hi,
I'm working on an App for a client who's going to use it internally with his employees.
My company has an Enterprise account and I'm a member of it.
Working with the Creative Cloud - not using the same email address as the Admin of the Enterprise account.
I finished creating the InDesign files, the certificates etc. I can launch "Create the app" in InDesign and fill the first steps in DPS App Builder but when I try to add the certificates it says:
"App ID inside the mobileprovision file contains "*". This type of mobileprovision app ID is only applicable for Enterprise signed builds. You will need to re-generate this file with a valid app ID."
Can the problem comes from the fact that I'm not logged into CC with the Enterprise Admin email address? Or because I'm set in the Enterprise Account as a member and not Admin?
Thank you for your help!
Sophie_HHI figured it out. I was confusing the p12 file for the push notifications with the original developer p12 file. All fixed.
Rob -
Hey Buddy ,
I have been using N95 for past couple of months , I have few queries if sumone can help will be gr8:
1) The images i take are very blur the edges are all mixed up in an image i tried changing the sharpness to hard , normal as well as soft but the edges of a wall or a person all seems to be mixed up ...
2) In video mode am not able to find the option to turn on the flash ..
Ne help will be appreciated... Thnxi once made a post here on taking photos search for "tips on taking photos" if these tips dont work maybe you need to update your firmware if this also doesnt work take your phone to a service centre
-
Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?
The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be. -
Dreamweaver Relative Image and Link Issue
Hi there
I have just created a website in Dreamweaver. It previews
fine in Firefox but when previewing it in IE neither the images are
loading or the internal links working.
I think it has something to do with roots or relative linking
as links are all coming up with
http://home.html in front of them and
images
http://home.html/Assets (assets
being where images are stored). I hope this isnt too difficult to
fix.
Thank you in advanceLOL. Just so....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Ken Binney" <[email protected]> wrote
in message
news:g9me63$hql$[email protected]..
> Lose this:
> <base href="home.html" />
>
> "B10000" <[email protected]> wrote in
message
> news:g9m260$553$[email protected]..
>> Hi there
>>
>> I have just created a website in Dreamweaver. It
previews fine in Firefox
>> but
>> when previewing it in IE neither the images or
loading, or the internal
>> links
>> working.
>>
>> I think it has something to do with roots or
relative linking as links
>> are all
>> coming up with
http://home.html in front of them and
images
>>
http://home.html/Assets (assets
being where images are stored). I hope
>> this
>> isnt too difficult to fix.
>>
>> Thank you in advance
>>
>
> -
since a few days ago Ive been unable to view videos and images on yahoo, youtube and facebook, any suggestions on what to do please
1. System Preferences > Flash Player > Advanced > Delete All
Press the "Delete All" button
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Download it first. Click Safari in the menubar and select “Quit Safari”.
Follow the prompts and install it.
Restart computer. Relaunch Safari.
2. Allow Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it. -
Failed Hardware Scan and other issues E440
Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description Symptom
IMAGE Replaced due to engineering change
System board Network card error
Hard disk drive Network card error
ECA-WIRELESS <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP. -
"The certificate chain was issued by an authority that is not trusted" when migrating to SQL 2012
Environment:
1 Primary Site (USSCCM-Site.domain.com)
1 CAS (USSCCM-CAS.domain.com)
SQL 2008 R2 (USSCCM-CAS.domain.com)
SQL 2012 SP1 CU6 (USSQL12.domain.com)
Issue:
We were successfully able to migrate the CAS to the new SQL 2012 server, almost without incident. When attempting to migrate the Site instance however, we are getting errors. Screenshot below.
Attached is a copy of the log. But below is a highlight of what I think are the errors… It appears that either SQL or SCCM doesn’t like a certificate somewhere, but it is contradicting because the logs say that it has successfully tested connection to SQL.
I am lost.
Logs stating it can connect successfully to SQL
Machine certificate has been created successfully on server USSQL12.domain.com. Configuration Manager Setup 10/21/2013 10:20:10
AM 2100 (0x0834)
Deinstalled service SMS_SERVER_BOOTSTRAP_USSCCM-Site.domain.com_SMS_SQL_SERVER on USSQL12.domain.com. Configuration Manager Setup 10/21/2013 10:20:10 AM
2100 (0x0834)
SQL Server instance [sccmsite] is already running under the certificate with thumbprint[f671be844bf39dec7e7fdd725dc30e225991f28a]. Configuration Manager Setup 10/21/2013 10:20:10 AM
2100 (0x0834)
INFO: Testing SQL Server [USSQL12.domain.com] connection ... Configuration Manager Setup 10/21/2013 10:20:10 AM
2100 (0x0834)
INFO: SQL Connection succeeded. Connection: USSQL12.domain.com SCCMSITE\MASTER, Type: Unsecure Configuration Manager Setup 10/21/2013 10:20:10 AM
2100 (0x0834)
INFO: Tested SQL Server [USSQL12.domain.com] connection successfully. Any preceding SQL connection errors may be safely ignored. Configuration Manager Setup 10/21/2013
10:20:10 AM 2100 (0x0834)
INFO: Certificate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
Configuration Manager Setup 10/21/2013 10:20:10 AM 2100 (0x0834)
INFO: Created SQL Server machine certificate for Server [USSQL12.domain.com] successfully. Configuration Manager Setup 10/21/2013 10:20:10 AM 2100 (0x0834)
INFO: Configuration Manager Setup - Application Shutdown Configuration Manager Setup 10/21/2013 10:20:10 AM 2100 (0x0834)
INFO: Running SQL Server test query. Configuration Manager Setup 10/21/2013 10:20:10 AM 2100 (0x0834)
INFO: SQL Connection succeeded. Connection: USSQL12.domain.com SCCMSITE\MASTER, Type: Secure Configuration Manager Setup 10/21/2013 10:20:10 AM
2100 (0x0834)
INFO: SQL Server Test query succeeded. Configuration Manager Setup 10/21/2013 10:20:10 AM
2100 (0x0834)
INFO: SQLInstance Name: sccmsite Configuration Manager Setup 10/21/2013 10:20:10 AM 2100 (0x0834)
INFO: SQL Server version detected is 11.0, 11.0.3381.0 (SP1). Configuration Manager Setup 10/21/2013 10:20:10 AM 2100 (0x0834)
Logs saying certificate is not trusted
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup
10/21/2013 10:20:49 AM 2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:20:49
AM 2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:20:49 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS. Configuration Manager Setup 10/21/2013 10:20:49 AM
2100 (0x0834)
INFO: SQL Connection failed. Connection: CCAR_DB_ACCESS, Type: Secure Configuration Manager Setup 10/21/2013 10:20:49
AM 2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup 10/21/2013 10:20:52 AM
2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup
10/21/2013 10:20:52 AM 2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:20:52
AM 2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:20:52 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS. Configuration Manager Setup 10/21/2013 10:20:52 AM
2100 (0x0834)
INFO: SQL Connection failed. Connection: CCAR_DB_ACCESS, Type: Secure Configuration Manager Setup 10/21/2013 10:20:52
AM 2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup 10/21/2013 10:20:55 AM
2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup
10/21/2013 10:20:55 AM 2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:20:55
AM 2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:20:55 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS. Configuration Manager Setup 10/21/2013 10:20:55 AM
2100 (0x0834)
INFO: SQL Connection failed. Connection: CCAR_DB_ACCESS, Type: Secure Configuration Manager Setup 10/21/2013 10:20:55
AM 2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup 10/21/2013 10:20:58 AM
2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup
10/21/2013 10:20:58 AM 2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:20:58
AM 2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:20:58 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS. Configuration Manager Setup 10/21/2013 10:20:58 AM
2100 (0x0834)
INFO: SQL Connection failed. Connection: CCAR_DB_ACCESS, Type: Secure Configuration Manager Setup 10/21/2013 10:20:58
AM 2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup 10/21/2013 10:21:01 AM
2100 (0x0834)
More logs saying cert is not trusted
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup 10/21/2013 10:21:20 AM
2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup
10/21/2013 10:21:20 AM 2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:21:20
AM 2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:21:20 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS. Configuration Manager Setup 10/21/2013 10:21:20 AM
2100 (0x0834)
INFO: Updated the site control information on the SQL Server USSQL12.domain.com. Configuration Manager Setup 10/21/2013 10:21:39 AM
2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup 10/21/2013 10:21:39 AM
2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup
10/21/2013 10:21:39 AM 2100 (0x0834)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:21:39
AM 2100 (0x0834)
ERROR: SQL Server error: [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 10/21/2013 10:21:39 AM
2100 (0x0834)
*** Failed to connect to the SQL Server, connection type: CCAR_DB_ACCESS. Configuration Manager Setup 10/21/2013 10:21:39 AM
2100 (0x0834)
CSiteSettings::WriteActualSCFToDatabase: Failed to get SQL connection Configuration Manager Setup
10/21/2013 10:21:39 AM 2100 (0x0834)
CSiteSettings::WriteActualSCFToDatabaseForNewSite: WriteActualSCFToDatabase(USA) returns 0x87D20002 Configuration Manager Setup 10/21/2013 10:21:39
AM 2100 (0x0834)
ERROR: Failed to insert the recovery site control image to the parent database. Configuration Manager Setup 10/21/2013 10:21:39 AM
2100 (0x0834)
Troubleshooting:
I have read on a few articles of other people having this issue that states to find the certificate on SQL 2012 that’s being used and export it to the SCCM server – which I’ve done.
http://damianflynn.com/2012/08/22/sccm-2012-and-sql-certificates/
http://trevorsullivan.net/2013/05/16/configmgr-2012-sp1-remote-sql-connectivity-problem/
http://scug.be/sccm/2012/09/19/configmgr-2012-rtm-sp1-and-remote-management-points-not-healthy-when-running-configmgr-db-on-a-sql-cluster/
-BradHi,
How about importing certificate in the personal folder under SQL server computer account into SCCM server computer account or SCCM server service account? That certificate is for SQL Server Identification. And you could
set the value of the ForceEncryption option to NO. (SQL Server Configuration Manager->SQL Server Network Configuration->
Protocols for <server instance>->Properties)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hello
Thank you for you time and help
I am trying to set up a test OSD deployment on a virtual system. I have followed my book and it looks like its been set up correctly. I read lots of posts in this forum and others and I am still having issues.
The Issue
When booting a client system getting "PXE-E53 - No boot filename received"
That I have done
1. Made sure that both my X64 and X86 Boot files have been distributed with "Deploy this boot image to from PXE-enabled DP" on both of them (looked under content statues on my DP and both are at 100)
2.Removed my DP and WSDS role and restarted and reinstalled
3. Created a new Boot image using a windows 2012 R2 DVD and used this in my task sequence, I removed both of the boot images (this got a bit further but I got an error telling me that It needs both X64 and X86). SO I readded them to my DP from
the boot folder of my E:\Program Files\Microsoft Configuration Manager\OSD\boot folder)
Here is my SMSPXE file
Client is set to use HTTPS when available. The current state is 224. SMSPXE 19/04/2015 16:15:43 6616 (0x19D8)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE 19/04/2015 16:15:43 6616 (0x19D8)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE 19/04/2015 16:15:43 6616 (0x19D8)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE 19/04/2015 16:15:43 6616 (0x19D8)
Adding TRD00015.3 SMSPXE 19/04/2015 16:15:43 6616 (0x19D8)
Adding TRD00016.2 SMSPXE 19/04/2015 16:15:47 6616 (0x19D8)
Found new image TRD00015 SMSPXE 19/04/2015 16:15:52 6616 (0x19D8)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll SMSPXE 19/04/2015 16:15:52 6616 (0x19D8)
Opening image file E:\RemoteInstall\SMSImages\TRD00015\boot.TRD00015.wim SMSPXE 19/04/2015 16:15:52 6616 (0x19D8)
Found Image file: E:\RemoteInstall\SMSImages\TRD00015\boot.TRD00015.wim
PackageID: TRD00015
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE 19/04/2015 16:15:52 6616 (0x19D8)
Closing image file E:\RemoteInstall\SMSImages\TRD00015\boot.TRD00015.wim SMSPXE 19/04/2015 16:15:52 6616 (0x19D8)
Found new image TRD00016 SMSPXE 19/04/2015 16:15:52 6616 (0x19D8)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll SMSPXE 19/04/2015 16:15:52 6616 (0x19D8)
================= PXE Provider loaded. ===================== SMSPXE 19/04/2015 16:17:54 4496 (0x1190)
Machine is running Windows Longhorn. (NTVersion=0X603, ServicePack=0) SMSPXE 19/04/2015 16:17:54 4496 (0x1190)
Cannot read the registry value of MACIgnoreListFile (00000000) SMSPXE 19/04/2015 16:17:54 4496 (0x1190)
MAC Ignore List Filename in registry is empty SMSPXE 19/04/2015 16:17:54 4496 (0x1190)
Begin validation of Certificate [Thumbprint C4D34F3B6322A19274BBC9EF1F9D71ECC8B9EC71] issued to 'c8b0427c-2014-419b-b251-ef0a6fbd96a0' SMSPXE 19/04/2015 16:17:54 4496 (0x1190)
Completed validation of Certificate [Thumbprint C4D34F3B6322A19274BBC9EF1F9D71ECC8B9EC71] issued to 'c8b0427c-2014-419b-b251-ef0a6fbd96a0' SMSPXE 19/04/2015 16:17:54 4496 (0x1190)
Initializing PXEPerfObject. SMSPXE 19/04/2015 16:17:54 4496 (0x1190)I agree with Narcoticoo, most of the time this comes down to either firewall, IPhelper, or DHCP options getting in the way.
MS best practice is to use _no_ DHCP options at all unless the DP/PXE is also a DHCP server. So remove any OPtion 67,68 from DHCP.
Then check the pxe.log on your DP. You should see the MAC address broadcast then the PXE/DP take action (or ignore it if things arn't correct).
1. If you don't see the appropriate MAC address broadcast, check IPHelper/firewall
2. If you see the MAC address broadcast but the DP ignores it, check your collections/deployments
3. If you see the PD respond in the pxe.log ... but the client does nothing, time to look at DHCP and make sure those silly options are cleared. -
Dear Experts,
i am getting the below error when i was giving * (Star) to view all the items in DB
[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)
As i was searching individually it is working fine
can any one help me how to find this..
Regards,
Meghanath.SDear Nithi Anandham,
i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
Regards,
Meghanath -
Text and images not displaying, but some are
I've uploaded my site, and images and text are missing. 4 pages are great, but the individual property pages are half empty (missing images, icons and text) Its a school project, so, yikes! www.icm-mp3.net/group17/
thank you in advanceI should clarify, it all worked fine on my own server. Now, on the schools site, its missing photos going across horizontally, the lightbox that goes with, a text box, an image embedded with links. The remaining elements are in their places. Could this be a server issue?
And, clever me, it is due tomorrow. -
TMG - 0x80090325 -Certificate Chain was issued by an authority that is not trusted
Hello,
I am having some problems with testing a OWA (SSL) rule. I get that message.
The TMG belongs to the domain and therefore as far as I know it gets the root certificate of my CA (I have deployed a Enterprise CA for my domain).
That is why I don't understand the message: "...that is not trusted."
The exact message:
Testing https://mail.mydomain.eu/owa
Category: Destination server certificate error
Error details: 0x80090325 - The certificate chain was issued by an authority that is not trusted
Thanks in advance!
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)Thanks Keith for your reply and apologies for the delay in my answer.
I coud not wait and I reinstalled the whole machine (W28k R2 + TMG 2010) . I suppose I am still a bad troubleshooter, I have experience setting up ISA, TMG, PKI, Active directory but to a certain extent.
1. Yes, I saw it when hitting the button "Test Rule" in the Publising rule in the TMG machine.
2. No, it did not work in this implementation but it has worked in others, this is not difficult to set up, until now, hehe.
3. You said: "...If you are seeing it when running "Test Rule" then it simply means that TMG does not trust something about the certificate that is on your Exchange Server...."
But the certificates are auto-enrolled, and when I saw the details of the certificates they all are "valid" , there is a "valid" message.
4. You wrote: "...Easiest way see everything is create an access rule that allows traffic from the LocalHost of TMG to the CAS and open up a web browser. Does the web browser complain?..."
But as I said, I re-installed the whole thing because nobody jumped in here , and I needed to move forward, I hope you understand.
5. S Guna kindly proposed this:
If you are using internal CA,
You need to import the Root CA certificate to TMG servers.
Import Private Key of the certificate to Server personal
Create a Exchange publishing Rule and Point the lisitner to the Correct certificate.
Since you are using internal CA, You need to import the Root CA certificate to all the client browers from where you are accessing OWA
But I think I do not have to perform any of those tasks, although I am not an expert but have worked with Certificate for one year or so.
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain) -
Hello,
I have configured BizTalk Services Hybrid Connection between Standard Azure Website and SQL Server 2014 on premise.
Azure Management portal shows the status of Hybrid Connection as established.
However, the website throws an error when trying to open a connection
<
addname="DefaultConnection"
connectionString="Data
Source=machine name;initial catalog=AdventureWorks2012;Uid=demouser;Password=[my password];MultipleActiveResultSets=True"
providerName="System.Data.SqlClient"
/>
(The same website, with the same connection string deployed on SQL Server machine works correctly).
I tried various options with the connections sting (IP address instead of machine name, Trusted_Connection=False, Encrypt=False, etc. the result is the same
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.
I tried various machines - on premise and a clean Azure VM with SQL Server and it results in the same error - below full stack
The certificate chain was issued by an authority that is not trusted
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The certificate chain was issued by an authority that is not trusted
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5341687
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +546
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock) +5348371
System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate) +91
System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate) +331
System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec, FeatureExtension requestedFeatures, SessionData recoverySessionData) +2109
System.Data.SqlClient.SqlInternalConnectionTds.Login(ServerInfo server, TimeoutTimer timeout, String newPassword, SecureString newSecurePassword) +347
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +238
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +892
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +311
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) +646
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +278
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +38
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +732
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +85
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1057
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +196
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +146
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +16
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) +94
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +110
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +44
[EntityException: The underlying provider failed on Open.]
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +203
System.Data.EntityClient.EntityConnection.Open() +104
System.Data.Objects.ObjectContext.EnsureConnection() +75
System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +41
System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +36
System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) +369
System.Linq.Enumerable.ToList(IEnumerable`1 source) +58
CloudShop.Services.ProductsRepository.GetProducts() +216
CloudShop.Controllers.HomeController.Search(String SearchCriteria) +81
CloudShop.Controllers.HomeController.Index() +1130
lambda_method(Closure , ControllerBase , Object[] ) +62
System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +14
System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +193
System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27
System.Web.Mvc.Async.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41() +28
System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult) +32
System.Web.Mvc.Async.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33() +58
System.Web.Mvc.Async.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49() +225
System.Web.Mvc.Async.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult) +34
System.Web.Mvc.Async.<>c__DisplayClass2a.<BeginInvokeAction>b__20() +23
System.Web.Mvc.Async.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult) +99
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeAction(IAsyncResult asyncResult) +27
System.Web.Mvc.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult) +14
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +39
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult) +29
System.Web.Mvc.Controller.System.Web.Mvc.Async.IAsyncController.EndExecute(IAsyncResult asyncResult) +10
System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult) +25
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +31
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +9651188
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.36213
Regards,
Michal
Michal MorciniecSame issue here, looking for more information !
Maybe you are looking for
-
How do you extract an .MP3 from an .MP4 file using iTunes?
I have figured out how to import a home video into iTunes (video taken with my iPhone 5S), and have figured out how to use iTunes to convert the video (recorded in Quicktime) to .MP4 format ... but I cannot then use iTunes to "Create a New Version" a
-
Pavillion dv6000 driver no longer working
I used to have dvd and video on my Pavillion but not any more. I have tried to many things but no luck. Can anyone help? thanks Val
-
I can't register my apple care in Hungary.
Sorry to post here, but i couldn't find any other topics related to this. I bought a new MBP 15 and an extended apple care and i can't reach any phone number i've been given which is impossible to reach. The retailer said apple severs are down for we
-
i want to uprage graphic card can i do so??
-
I read all the documentation on vendor specific tolerances and am now completely confused. We already have tolerance limits set up for all vendors in regards to price (PP) and quantity. The price variance is set to $100 or 50%, whichever comes first