Certificate error - Hostname and Subject do not match

Hi,
SCOM: 2012 R2 UR4
At installing agent on RedHat 6.6 I get the following error:
Agent verification failed. Error detail: The server certificate on the destination computer (eapp202p.mydomain.net:1270) has the following errors:
The SSL certificate could not be checked for revocation. The server used to check for revocation might be unreachable.
The SSL certificate contains a common name (CN) that does not match the hostname.
The "hostname" command at linux generates: eapp202p.mydomain.net
The "openssl x509 -noout -in /etc/opt/microsoft/scx/ssl/scx.pem -subject -issuer -dates" command at linux ( http://technet.microsoft.com/en-us/library/dd891009) generates: subject=eapp201p.mydomain.net.
The above article states the following:
If the UNIX or Linux hostname is incorrect, do one of the following:
Change the hostname on the UNIX or Linux host to the correct one and create a new certificate.
Create a new certificate with the desired hostname.
The linux admin says it is impossible change the hostname.
The question is:
How to create a new certificate with the desired hostname?
Thanks in advance!

What version of the OS, X64 or X86, are you trying to install the agent on? Currently it looks like you have the X86 version installed. If this is truly a X64 bit version of the OS you need to remove the X86 bit version of the SCX agent. [rpm -e scx] then
install the X64 bit version [rpm -ivh scx-1.5.1-138.rhel.6x64.rpm].
Once you get that resolved look and see if you have the scxsslconfig file under /opt/microsoft/scx/bin/tools [ls -al /opt/microsoft/scx/bin/tools/scxsslconfig]. If it's there try running it as mentioned in my first post.
Regards,
-Steve

Similar Messages

Accounts and entities do not match in application ownership

Hi all,
I'm working on NW 7.5 SP07 (upgrading in SP09 isn't an option at the moment) and when running Consolidation i am getting the error "Accounts and entities do not match in application ownership".
I am very familiar with Consolidation and created consol appsets numerous times, so I am confident I have set up the dimensions correctly (with all the right properties), appset and app web parameters all look ok, business rules are good, ownership and rate data is all in correct place...but no matter what i do i still get this error.
FX, carry-forward and calc accounts all work ok, so it is simply something wrong with the ownership app or with how finance is talking to it.
There was only 1 thread I could find where others had this issue - many people had the same problem and there was never a clear solution to it ..... [Accounts and entities do not match data in application OWNERSHIP;
Any ideas besides upgrading to SP09?
Tom.

Hi Tom
Thank you for answer. I found some missing data in my ownership cube and now 'Accounts and entities do not match in application ownership' gone but new error appears after validate script in se38 'GETWA_NOT_ASSIGNED'. Have you ever had this kind of error?
SAP sent me some tasks list but it seems to me that I have all settings they sent in that document.
I have a couple of questions and will be very appreciate if you can answer me.
Are additional members in O_Acct necessary? If I use only METHOD PCON PGROUP POWN in my input schedules.
METHOD_SYS
PCON_SYS
PCTRL
PCTRL_SYS
POWN_SYS
POWND
POWND_SYS
Are you using those above for your consolidation process?
Are you using dynamic hierarchy editor or input schedules to maintain your ownership data?
Regards!
Justyna

RUN LOGIC:Accounts and entities do not match data in application Ownership (BPC10.0 NW)

Hello Experts,
During execution of the legal consolidation package we get the following error: "Accounts and entities do not match data in application OWNERSHIP"
We have entered the ownership and transaction data.
Could you, please, help us to solve the problem?
Thanks.

Hi
The Ownership has accounts like Percentage consolidation etc. Please check if you have selected the correct ones, marked as use in consolidation process and loaded Ownership data aganst those .
Regards
Surabhi

Accounts and entities do not match data in application OWNERSHIP

Dear experts,
During execution of the legal consolidation package we get the following error:
"Accounts and entities do not match data in application OWNERSHIP"
We have entered the ownership and transaction data.
Could you, please, help us to solve the problem?
Thanks.
Mila

This problem occurs when your Legal application is not in synch with your Ownership.
See below what you have to do to fix this problem.
I am considering you are using BPC for NETWEAVER.
If you are using BPC for Windows, then you gonna have to check some other properties too. ok?
Here we go.
LEGAL APPLICATION parameters must be setup in web, as follows:
ORG_ACCOUNTLIST = METHOD,PCON,POWN
ORG_ACCOUNTOWN = PGROUP
ORG_INTCO = I_NONE
ORG_OWNERSHIPCUBE = OWNERSHIP (or the name of your ownership InfoCube)
ORG_PARENTPROPERTY = PARENT_GROUP
OWNERSHIP_APP = OWNERSHIP (or the name of your ownership application)
USELIM = 1 (if you gonna use US elimination)
VALIDATIONS = 1 (if you gonna use "online" validations entered in Netweaver)
OWNERSHIP APPLICATION parameters must be setup in web, as follows:
ORG_ACCOUNTLIST = METHOD,PCON,POWN
ORG_ACCOUNTOWN = PGROUP
ORG_INTCO = I_NONE
ORG_OWNERSHIPCUBE = OWNERSHIP (or the name of your ownership InfoCube)
ORG_PARENTPROPERTY = PARENT_GROUP
OWNERSHIP_APP = OWNERSHIP (or the name of your ownership application)
After setup web parameters, go to BPC console and check the following dimensions:
(I am mentioning just the ones you need to setup for the consolidation)
C_ACCT
This is your account, and if you are using SAP ECC it should be equal to 0050 accounts of your GL (for example)
In this dimension, you must check the following properties:
ID - NEVER, I repeat NEVER, use lower case letters since BPC is case sensitive.
     ALWAYS USE UPPER CASE, FOR EXAMPLE, MY ACCOUNT ID'S ARE:   VLD_PL_INV,   VLD_PR_INV and so on.....
     This is valid for all dimensions or any other ID you gonna create in BPC.
RATETYPE - must setup and must be the ones you gonna use in your RATE application
DIMLIST2 - must use to GROUP your accounts for eliminations or any other automatic adjustment
C_CATEGORY
This is your consolidation categories used to link data you gonna load to your Legal InfoCube.
You must have C_100 for example, for your Actual Version.
You can use the ones that comes with APSHELL C_CATEGORY. It is fine.
C_DATASRC
This is just to TRACK your entries.
Create as many data sources you need and you gonna use.
You can use the ones that comes with APSHELL C_DATASRC. It is fine.
ATTENTION for the following properties:
DATASRC_TYPE - I for input (all the entries, transaction data from txt or ECC) and A for automatic adjustments
IS_CONSOL - Y means that ALL entries in the Legal infocube must be considered for consolidation
IS_CONVERTED - Y means that ALL entries in the Legal infocube must be converted to the GROUP for consolidation
DATASRC_STAGE = Y (allways Y)
ENTITY
ID and PARENTH1 must be entered and must reflect your company hierarchy.
INTCO - inform the associated Inter Company.
CURRENCY - You must inform the currency of the company otherwise IT IS NOT GONNA WORK.
           This currency ID must be setup IN ALL the currency dimensions.
In this entity you must enter:
1-All the companies
2-ALL TECHNICAL COMPANIES for the consolidation to work
3-ALL TECHNICAL COMPANIES for VALIDATIONS (if you gonna do you validations thru script logic to
have better control of accounts and values).
ATTENTION:
JUST FOR THE TECHNICAL COMPANIES FOR CONSOLIDATION YOU MUST INFORM Y   TO THE ELIM PROPERTY.
Leave it blank for all the other companies.
FLOW - you can use the one that comes with APSHELL
GROUPS
If your version of BPC is 7.0 than this dimension has two objectives.
First Objective - store all the currencies.
All you company data must be loaded with LC currency i.e. in the Legal InfoCube, you gonna see LC in the GROUPS column.
This is you Local Currency, so NEVER delete it.
These currencies must have the following properties setup:
REPORTING - Y for any other currency you insert, X for LC currency, X for Transction Currency.
CURRENCY_TYPE - R for reporting, L just for LC currency, T for the transaction Currency
Leave all the other properties blank!!!!
Edited by: JADIRM on Nov 7, 2010 3:23 AM

"Accounts and entities do not match data in application OWNERSHIP failed"

Hi experts,
We are executing the IC Elimination package and we get next error:
"Accounts and entities do not match data in application OWNERSHIP failed"
We have entered the ownershipdata, post the correcta data, executed the currency conversion but the status package is error and gives the reported message.
Did it happen to anybody? How can we solve the problem?
Regards.

Hi Dani, thanks a lot for your reply.
I am running BPC 7.0.0.8 SP8
I've turnned ELIM property of ENTITY to blank as you suggested.
Now I get another error:
DATA FOR CATEGORY C_100 NOT FOUND IN APPLICATION LEGAL.
Looking into the LEGAL cube I have data for C_100....
Do you have any idea?
Thanks a lot again...
Jadir

Still ORA-19007: Schema and element do not match Error

Hi all,
I'm new to XML and dealing with lots of information but I'm stuck with this error ORA-19007: Schema and element do not match. Read some forums and tried some possibitlities but none has solved this issue. I think this is related with some malformed headers definitions but I'm not sure, so any help will be much appreciated.
Here's what I've done so far:
This is the xml file - emp.xml:
<?xml version="1.0" encoding="UTF-8"?>

<employees xmlns:xdb="http://xmlns.oracle.com/xdb" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/xdb/emp.xsd">
     <employee team="Team Test">
          <id>1</id>
          <name>Nelson Branco</name>
          <comment>No Comments</comment>
     </employee>
</employees>
...and this is the XSD file: emp.xsd:
<?xml version="1.0" encoding="ISO-8859-15"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="qualified" xdb:storeVarrayAsTable="true">
     <xs:element name="comment" type="xs:string"/>
     <xs:element name="id" type="xs:string"/>
     <xs:element name="name" type="xs:string"/>
     <xs:complexType name="employeeType">
          <xs:sequence>
               <xs:element ref="id"/>
               <xs:element ref="name"/>
               <xs:element ref="comment" minOccurs="0"/>
          </xs:sequence>
          <xs:attribute name="team" type="xs:string" use="optional"/>
     </xs:complexType>
     <xs:element name="employee" type="employeeType"/>
     <xs:element name="employees" xdb:defaultTable="EMPLOYEES">
          <xs:complexType>
               <xs:sequence>
                    <xs:element ref="employee" maxOccurs="unbounded"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
</xs:schema>
1) Created folders
declare
ignore boolean;
begin
ignore := dbms_xdb.createFolder('/public/Emp');
ignore := dbms_xdb.createFolder('/public/Emp/xsd');
ignore := dbms_xdb.createFolder('/public/Emp/xml');
commit ;
end;
2) Copied emp.xsd to /public/Emp/xsd in Win Explorer (via WebDAV connection)
3) Registered the schema
begin
dbms_xmlschema.registerURI(schemaURL => 'http://xmlns.oracle.com/xdb/emp.xsd'
,schemaDocURI => '/public/Emp/xsd/emp.xsd'
,genTables => true
commit ;
end ;
4) Copied the xml file to /public/Emp/xml. At this point I was expecting that the xml file was automatically uploaded to corresponding tables based on is content but it didn't happen. I didn't got any error also. When I issue:
Select count(*) from employees
...or
select y."name", y."team" from employees x, table(x.xmldata."employee") y
...got 0 rows returned
5) So then created the table:
create table emp_tab(
id number,
emp sys.XMLType
xmltype column emp
XMLSCHEMA "http://xmlns.oracle.com/xdb/emp.xsd"
element "employee";
6) And tried to insert one record based on the emp.xml:
insert into emp_tab values (1,
xmltype('<?xml version="1.0" encoding="UTF-8"?>

<employees xmlns:xdb="http://xmlns.oracle.com/xdb" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/xdb/emp.xsd">
     <employee team="Team Test">
          <id>1</id>
          <name>Nelson Branco</name>
          <comment>No Comments</comment>
     </employee>
</employees>'));
...and that when I get ORA-19007: Schema and element do not match.
Any help on this will be appreciated. Thx.

SQL> set echo on
SQL> spool testcase.log
SQL> --
SQL> connect sys/ as sysdba
Enter password:
Connected.
SQL> set define on
SQL> --
SQL> define USERNAME = OTNTEST
SQL> --
SQL> def PASSWORD = OTNTEST
SQL> --
SQL> def USER_TABLESPACE = USERS
SQL> --
SQL> def TEMP_TABLESPACE = TEMP
SQL> --
SQL> drop user &USERNAME cascade
2 /
old   1: drop user &USERNAME cascade
new   1: drop user OTNTEST cascade
User dropped.
SQL> grant connect, resource to &USERNAME identified by &PASSWORD
2 /
old   1: grant connect, resource to &USERNAME identified by &PASSWORD
new   1: grant connect, resource to OTNTEST identified by OTNTEST
Grant succeeded.
SQL> grant create any directory, drop any directory to &USERNAME
2 /
old   1: grant create any directory, drop any directory to &USERNAME
new   1: grant create any directory, drop any directory to OTNTEST
Grant succeeded.
SQL> grant alter session, create view to &USERNAME
2 /
old   1: grant alter session, create view to &USERNAME
new   1: grant alter session, create view to OTNTEST
Grant succeeded.
SQL> alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
2 /
old   1: alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
new   1: alter user OTNTEST default tablespace USERS temporary tablespace TEMP
User altered.
SQL> connect &USERNAME/&PASSWORD
Connected.
SQL> --
SQL> alter session set events ='19027 trace name context forever, level 0x800'
2 /
Session altered.
SQL> var schemaURL varchar2(256)
SQL> var schemaPath varchar2(256)
SQL> --
SQL> begin
2    :schemaURL := 'http://xmlns.oracle.com/xdb/emp.xsd';
3    :schemaPath := '/public/testcase.xsd';
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> create or replace directory XMLDIR as 'c:\xdb\otn'
2 /
Directory created.
SQL> declare
2    res boolean;
3    xmlSchema xmlType := xmlType(
4 '<?xml version="1.0" encoding="ISO-8859-15"?>
5 
6 <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="qualified" xdb:store
VarrayAsTable="true">
7 <xs:element name="comment" type="xs:string"/>
8 <xs:element name="id" type="xs:string"/>
9 <xs:element name="name" type="xs:string"/>
10 <xs:complexType name="employeeType">
11 <xs:sequence>
12 <xs:element ref="id"/>
13 <xs:element ref="name"/>
14 <xs:element ref="comment" minOccurs="0"/>
15 </xs:sequence>
16 <xs:attribute name="team" type="xs:string" use="optional"/>
17 </xs:complexType>
18 <xs:element name="employee" type="employeeType"/>
19 <xs:element name="employees" xdb:defaultTable="EMPLOYEES">
20 <xs:complexType>
21 <xs:sequence>
22 <xs:element ref="employee" maxOccurs="unbounded"/>
23 </xs:sequence>
24 </xs:complexType>
25 </xs:element>
26 </xs:schema>');
27 begin
28    if (dbms_xdb.existsResource(:schemaPath)) then
29      dbms_xdb.deleteResource(:schemaPath);
30    end if;
31    res := dbms_xdb.createResource(:schemaPath,xmlSchema);
32 end;
33 /
PL/SQL procedure successfully completed.
SQL> begin
2    dbms_xmlschema.registerSchema
3    (
4      :schemaURL,
5      xdbURIType(:schemaPath).getClob(),
6      TRUE,TRUE,FALSE,TRUE
7    );
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> var xmltext varchar2(4000)
SQL> --
SQL> begin
2    :xmltext :=
3 '<?xml version="1.0" encoding="UTF-8"?>
4 
5 <employees xmlns:xdb="http://xmlns.oracle.com/xdb" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation=
"http://xmlns.oracle.com/xdb/emp.xsd">
6 <employee team="Team Test">
7 <id>1</id>
8 <name>Nelson Branco</name>
9 <comment>No Comments</comment>
10 </employee>
11 </employees>';
12 end;
13 /
PL/SQL procedure successfully completed.
SQL> insert into EMPLOYEES values ( xmltype(:xmltext));
1 row created.
SQL> /
1 row created.
SQL> create table emp_tab
2 (
3     id number,
4     emp sys.XMLType
5 )
6 xmltype column emp
7 XMLSCHEMA "http://xmlns.oracle.com/xdb/emp.xsd"
8 element "employee"
9 /
Table created.
SQL> insert into EMP_TAB values ( 1, xmltype(:xmltext))
2 /
insert into EMP_TAB values ( 1, xmltype(:xmltext))
ERROR at line 1:
ORA-19040: Element employees does not match expected employee.
SQL> drop table emp_tab
2 /
Table dropped.
SQL> create table emp_tab
2 (
3     id number,
4     emp sys.XMLType
5 )
6 xmltype column emp
7 XMLSCHEMA "http://xmlns.oracle.com/xdb/emp.xsd"
8 element "employees"
9 /
Table created.
SQL> insert into EMP_TAB values ( 1, xmltype(:xmltext))
2 /
1 row created.
SQL>

Error Plant in reference document and plant do not match

Hi,
I have a problem where in the a shopping created and been approved but the backend communication error shows " 06730 Plant in reference document and plant do not match". The user has used the plant before without having any problem. Please let me know if any root causes.
Thank you,
Manyam

Hello Manyam,
R/3 is raising this message because you are trying to create a PO or PR with a plant that does not match the item reference document.
Reference document can be for example a R/3 contract or a R/3 source list.
It is not possible to change the plant when creating a purchase order with regard to a contract.
Are you using R/3 contract reference in SRM shopping cart ? (maybe coming from catalog item ?)
Did you checked the SOS tab in SRM SC item, to see if the system assigned automatically a SOS (this is the case if only one R/3 SOS is found) ? But in this case, the plant is used as a filter so you could not have SOS from wrong plant.
Rgds
Christophe

While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

storage-vdc(config-if)# show module
Mod Ports Module-Type                         Model              Status
2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
sw1-gd78(config-if)# sh module
Mod Ports Module-Type                         Model              Status
2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
Mod Sw              Hw      World-Wide-Name(s) (WWN)
2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
4    5.2(2)          0.107   --
7    5.2(2)          1.8     --
8    5.2(2)          1.8     --
10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
sw1-gd78(config-if)# sh run int ethernet4/6
!Command: show running-config interface Ethernet4/6
!Time: Mon Feb 20 22:56:12 2012
version 5.2(2)
interface Ethernet4/6
no shutdown
sw1-gd78(config-if)# no shut
sw1-gd78(config-if)# speed 1000
ERROR: Ethernet4/6: Configuration does not match the port capability.
sw1-gd72# sh int ethernet4/6 capabilities
Ethernet4/6
Model:                 DS-X9708-K9
Type (SFP capable):    10Gbase-SR
Speed:                 1000,10000
Duplex:                full
Trunk encap. type:     802.1Q
Channel:               yes
Broadcast suppression: percentage(0-100)
Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
Rate mode:             dedicated
QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
CoS rewrite:           yes
ToS rewrite:           yes
SPAN:                  yes
UDLD:                  yes
Link Debounce:         yes
Link Debounce Time:    yes
MDIX:                  no
Port Group Members:    none
TDR capable:           no
FabricPath capable:    yes
Port mode:             Switched
sw1-gd72# sh int ethernet4/6 transceiver details
Ethernet4/6
    transceiver is present
    type is 10Gbase-SR
    name is CISCO-FINISAR
    part number is FTLX8571D3BCL-CS
    revision is C
    serial number is FNS12090EMJ
    nominal bitrate is 10300 MBit/sec
    Link length supported for 50/125um OM2 fiber is 82 m
    Link length supported for 50/125um OM3 fiber is 300 m
    Link length supported for 62.5/125um fiber is 26 m
    cisco id is --
    cisco extended id number is 4
           SFP Detail Diagnostics Information (internal calibration)
                                     Alarms                  Warnings
                                High        Low         High          Low
Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
Tx Power       -2.65 dBm       1.49 dBm -11.30 dBm   -1.50 dBm     -7.30 dBm
Rx Power       -2.21 dBm       1.99 dBm -13.97 dBm   -1.00 dBm     -9.91 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning

Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

Flash Chart Error "A Start-tag was not matched with an end-tag."

All of the Flash charts on a page started displaying the error "A Start-tag was not matched with an end-tag." The charts were all working prefectly and no changes were made to the page. Any thoughts?
Thanks.

Here is what I get when I click Show XML in debug mode. Thanks.
<?xml version="1.0" ?>
- <root>
- <styles>
<style type="background" id="background" background_type="solid" color="0xffffff" alpha="0" />
<style type="deal_background" id="dealBackground" enabled="yes" color="0xdddddd" alpha="100" />
<style type="deal_border" id="dealBorder" enabled="yes" thickness="1" color="0x666666" alpha="100" />
<style type="deal_position" id="dealPosition" left="146" top="169.1707317" />
<style type="deal_size" id="dealSize" startAngle="0" endAngle="180" innerRadius="0" outerRadius="109.5" />
<style type="indicator_background" id="indicatorBackground" enabled="yes" color="0x000000" alpha="100" />
<style type="indicator_border" id="indicatorBorder" enabled="yes" color="0xFFFFFF" thickness="1" alpha="0" />
<style type="scale_size" id="scaleSize" length="7.3" />
<style type="scale_position" id="scalePosition" radius="102.2" />
<style type="scale_lines" id="scaleLines" enabled="yes" thickness="1" color="0x000000" alpha="100" />
<style type="scale_labels_position" id="scaleLabelsPosition" radius="109.5" />
<style type="scale_labels_background" id="scaleLabelsBackground" enabled="no" />
<style type="scale_labels_border" id="scaleLabelsBorder" enabled="no" color="0x000000" />
<style type="scale_labels_text" id="scaleLabelsText" font="Verdana" size="10" color="0x000000" bold="no" italic="no" underline="no" align="right" />
<style type="scale_labels_size" id="scaleLabelsSize" />
<style id="areaBackground0" type="area_background" enabled="yes" color="0x669999" alpha="100" />
<style id="areaBackground1" type="area_background" enabled="yes" color="0xCCCCCC" alpha="100" />
<style id="areaBorder" type="area_border" enabled="yes" thickness="1" color="0xFFFFFF" alpha="100" />
<style id="areaBorder0" type="area_border" enabled="yes" thickness="1" color="0x666666" alpha="100" />
<style id="areaSize" type="area_size" outerRadius="105.85" innerRadius="36.5" />
<style type="circle_object_border" id="dotBorder" enabled="no" />
<style type="circle_object_position" id="dotPosition" left="146" top="169.1707317" />
<style type="circle_object_size" id="dotSize" radius="7.3" />
<style type="circle_object_background" id="dotBackground" enabled="yes" color="0x000000" alpha="100" />
<style id="emptyBorder" enabled="no" />
</styles>
- <shapes>
- <shape id="indicatorShape" type="polygon">
<point x="0" y="-4" />
<point x="-97.82" y="0" />
<point x="0" y="4" />
<point x="0" y="-4" />
</shape>
</shapes>
- <objects>
<circle sizeStyleId="dotSize" positionStyleId="dotPosition" backgroundStyleId="dotBackground" borderStyleId="dotBorder" />
</objects>
- <data>
<deal minimum="0" maximum="100" sizeStyleId="dealSize" positionStyleId="dealPosition" backgroundStyleId="dealBackground" borderStyleId="dealBorder" />
- <areas>
<area startValue="1" endValue="99" backgroundStyleId="areaBackground1" borderStyleId="areaBorder" sizeStyleId="areaSize" />
</areas>
- <scales>
<scale startAngle="0" endAngle="180" angleStep="18" labelsPrefix="" labelsPostfix="%" decimalPlaces="0" sizeStyleId="scaleSize" positionStyleId="scalePosition" linesStyleId="scaleLines" labelPositionStyleId="scaleLabelsPosition" labelBackgroundStyleId="scaleLabelsBackground" labelBorderStyleId="scaleLabelsBorder" labelTextStyleId="scaleLabelsText" labelSizeStyleId="scaleLabelsSize" />
</scales>
<indicator value="51.7412935" backgroundStyleId="indicatorBackground" borderStyleId="indicatorBorder" shapeId="indicatorShape" />
</data>
</root>

SQL Error: ORA-01861: literal does not match format string

Hello,
I'm trying to do data mining on a web log which recorded one day web access information from a busy web server. I imported the data into Oracle Data miner, and created a table (WEBLOG). The idea is to create a new field, i.e. session, for the users so that each session could be thought as a representative of a user-intent (aka topic). Now based on this, data mining models would be used to cluster(group) the users based on their similarity. The first step is to prepare the data which involves using SQL queries. So first, all I did was to create a function for date and time. This is the following code I used,
create or replace function ssndate(p_date in varchar2 default '03-01-18',
p_time in varchar2)
return number
$if dbms_db_version.ver_le_10 $then
deterministic
$elsif dbms_db_version.ver_le_11 $then
result_cache
$end
as
begin
return trunc((to_date(p_date||' '||p_time, 'dd-mm-yy hh24:mi:ss')
- to_date('01-01-90','dd-mm-yy')) * (86400/2400));
end ssndate;
The function ssndate compiled successfully.
The next step I took was to create a view through the following query,
create or replace view WEBLOG_VIEWS
as
select (select ssndate(LOG_DATE, LOG_TIME) from dual) as "SESSION_DT",
C_IP,
CS_USER_AGENT,
(CS_URI_STEM||'?'||CS_URI_QUERY) as WEB_LINK
from WEBLOG;
This was successful as well. The problem is in the next step where I try to do data grouping.
create table FINAL_WEBLOG as
select SESSION_DT, C_IP, CS_USER_AGENT,
listagg(WEB_LINK, ' ')
within group(order by C_IP, CS_USER_AGENT) "WEB_LINKS"
from WEBLOG_VIEWS
group by C_IP, CS_USER_AGENT, SESSION_DT
order by SESSION_DT
For this, I got the error,
Error starting at line 1 in command:
create table FINAL_LOG as
select SESSION_DT, C_IP, CS_USER_AGENT,
listagg(WEB_LINK, ' ')
within group(order by C_IP, CS_USER_AGENT) "WEB_LINKS"
from WEBLOG_VIEWS
group by C_IP, CS_USER_AGENT, SESSION_DT
order by SESSION_DT
Error at Command Line:1 Column:7
Error report:
SQL Error: ORA-01861: literal does not match format string
ORA-06512: at "DMUSER.SSNDATE", line 11
ORA-06512: at line 1
01861. 00000 - "literal does not match format string"
*Cause: Literals in the input must be the same length as literals in
the format string (with the exception of leading whitespace).
If the "FX" modifier has been toggled on, the literal must
match exactly, with no extra whitespace.
*Action: Correct the format string to match the literal.
I don't know where I'm going wrong with this.. the to_date function should be fine. In the data that I possess, the date and time are in no format. Example: 30118 and 0:00:09 respectively. If anyone has any clue about this I would be sincerely grateful for any help that I can get!! It's quite urgent..
The Oracle version is 11.2.0.1.0
Edited by: 975265 on Dec 5, 2012 5:31 PM

975265 wrote:
Ok.. Looks like I touched a nerve there. I apologize. I'm still a student, and this is the first time that I've tried something at this level. I'm still in the learning process, so I was hoping that someone could point me in the right direction in order to "fix" the data.Not so much touching a nerve as simply trying to implement a very very poor, but all too common, practice. Since you are a student (which we didn't know until this post) most people will cut you some slack. However, this little exchange should now be burned into your brain as you move forward. One of the very first rules of programming is to ALWAYS use the correct data types for your data. And along with that, never ever depend on implicit type conversions - always use the proper explicit conversion functions.
And as a slight follow-on, when considering the appropriate data type, don't assume that just because we refer to a given element as a 'something number' that it is indeed a number. Telephone "numbers" are NOT numbers. U.S. Social Security "numbers" are NOT numbers. U.S. Postal Zip codes are NOT numbers. All are just character strings which, by convention, we limit to the same characters we use to represent numbers.
And since this entire discussion came up around the representation of dates, you might want to take a look at http://edstevensdba.wordpress.com/2011/04/07/nls_date_format/
Now, go forth and be a smarter programmer than your peers.
Edited by: EdStevens on Dec 6, 2012 6:12 AM

Sound and picture did not match?

After recording the presentation it was OK and I could show it. But the fourth time I would show the presentation the sound and animation did not match the pictures? t.i. Keynote did not move to next picture (e.g. I was in picture No. 3 and it shoud move to next picture 4 but it doesn't - and the voice to the next picture No. 4 started continued in picture 3)
Why does this happened? Is Keynote not reliable?

If sound files and images are placed on the slide and timed using Inspector > Builds they will maintain the timing.
I have suggested to do that instead of using the recording feature built in to Keynote which has proven to be unreliable with large numbers of slides and longer voice overs.
Switching to using builds will eliminate these errors.

Error: user supplied keyhash does not match tape keyhash.

I am getting the following error:
ob> catxcr admin/5
2013/08/02.07:41:32 ______________________________________________________________________
2013/08/02.07:41:32
2013/08/02.07:41:32 Transcript for job admin/5 running on blm1005
2013/08/02.07:41:32
ob> catxcr admin/5
2013/08/02.07:41:32 ______________________________________________________________________
2013/08/02.07:41:32
2013/08/02.07:41:32 Transcript for job admin/5 running on blm1005
2013/08/02.07:41:32
Error: user supplied keyhash does not match tape keyhash.
If tape information is valid, use --ignoremismatch option.
I've tried using the "ignore key mismatch" button, tried entering --ignoremismatch in the options line with no positive results. Our catalog directory has remained intact so I would not expect any issues with keys. Anyone know exactly what this error means and have any suggestions how to get around it?
Thank you.

Hi bmarques
Welcome to BlackBerry Support Forums
Which BlackBerry device( model ) you have ?
Are you sure you're using the same BlackBerry ID username that you're using before on that device ? Or trying to login with a new BlackBerry ID ?
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

My macbook is loaded with microsoft work and every time I try and open the program I get an error reading and it will not open. Powerpoint and the other applications still respond!

my macbook is loaded with microsoft word for macs and every time I try and open the program I get an error reading and it will not open. This is what it says:
The application Microsof Word quit eunexpectedly. Powerpoint and the other applications still respond!

The joys of Microsoft!
Maybe the preferences file is corrupted. You should be able to find the Word preferences file in the folder:
your user name/Library/Preferences
Its name is com.microsoft.Word.plist
I suggest you drag this another folder and try Word again.
If that doesn't work then you might find clearing the cache files will fix the problem. You can do this manually but I never bother. Instead I use a program like Snow Leopard Cache Cleaner (shareware) or Onyx (free). These programs do lots of other maintenance jobs so it's worth having at least one of them.
Bob

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks

You cannot customize the Safari toolbar on the iPad.
What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser.

Certificate error - Hostname and Subject do not match

Similar Messages

Maybe you are looking for