Certificate error when using connection broker on Mac client
We're using RD Connection Broker using IP address redirection for a couple of years now. Previously Mac client were using iTap RDP without any problems. Clients are connecting using a RD Gateway server.
When trying to connect using the latest Microsoft remote desktop client (version 8.0.24255) a certificate warning is shown saying the IP-address doesn't match the name in the certificate. The client shoudn't match the IP address with the certificate but
should match the farm name. The error occurs when the connection broker redirects the client to a server.
Any help is appreciated
<style type="text/css">p, li { Version 8.0.24255</style>
Hi MatthijsO,
Have you updated it to 8.0.3? Does the issue persist?
Thanks.
Jeremy Wu
TechNet Community Support
Similar Messages
-
RDS 2012 - Certificate error when using RemoteApp
Have setup the RD Gateway to use port 40001 for the https transport. Internally everything works good. Can login to RD Web externally fine, but when trying to launch a RemoteApp it starts then returns a certificate error. The certificate it is showing
is for the exchange server which of course is on port 443. This is a single IP environment. From what I see happening, it is defaulting back to 443 even though it has been told to use 40001. Obviously the site connects and secures using the 40001
port, but the RemoteApps still want to fall back to 443. It this a flaw or am I missing something? I thought the whole reason of selecting another port was to use that other port.
ThanksThis power script worked like a charm for me.
Luckily this is just a lab setup, but I was racking my brains for a couple of days until I found this.
Same situation, port 443 is used for email server and needed to use an alternate SSL port.
Changing the port on the server side for the RD Web Access URL was a breeze, but changing the port for the RemoteApp collection was not as easy to figure out until I found this post.
In my situation, like I read before, when you try to run one of the apps in the collection, it will invoke the certificate that our mail server uses since it tries to use port 443 which is assigned to the mail server.
Running the script immediately fixed the problem by using the alternate port specified in the script.
Hopefully this will help tons of folks in this same situation.
PS: If I had a bunch of public IPs to work with, I would not have to use alternate ports. -
Certificate Error when using pub services with IE7
everytime i try to use pub services admin console i get the
following warning im using IE7 any idea how to stop this nag ? :
There is a problem with this website's security certificate.
The security certificate presented by this website was not
issued by a trusted certificate authority.
Security certificate problems may indicate an attempt to fool
you or intercept any data you send to the server.
We recommend that you close this webpage and do not continue
to this website.
Click here to close this webpage.
Continue to this website (not recommended).
More information
If you arrived at this page by clicking a link, check the
website address in the address bar to be sure that it is the
address you were expecting.
When going to a website with an address such as
https://example.com, try adding the 'www' to the address,
https://www.example.com.
If you choose to ignore this error and continue, do not enter
private information into the website.hi,
IE 7 has changed the way certificates were handled when
compared to IE 6. In IE 6, the user gets an option to view the
certificate before proceeding to view the site. In the process the
user can import the certificate into the browsers trust store.
Since CPS is deployed with a self signed certificate, in IE 7
we get a certificate error.
There is currently no workaround for the same, except to
deploy cps war file on an application server that has a certificate
signed by a signing authority
thanks,
sudharshan -
How to handle the error when using Connection.setAutoCommit()
I use Jboss's datapool to realize the connection to Sybase
Database.And after connected to the database I wrote "con.setAutoCommit(false)" then the error occured.
The error is "java.sql.SQLException: JZ0SJ: Metadata accessor information was not found on this database. Please install the required tables as mention ed in the jConnect documentation."
I think it is because there is something wrong with the
configuration of the database but can not handle it .So please
help me,thank you!I use Jboss's datapool to realize the connection to
o Sybase
Database.And after connected to the database I wrote
"con.setAutoCommit(false)" then the error occured.
The error is "java.sql.SQLException: JZ0SJ: Metadata
a accessor information was not found on this database.
Please install the required tables as mention ed in
the jConnect documentation."
I think it is because there is something wrong with
th the
configuration of the database but can not handle it
.So please
help me,thank you!Most likely it means that your either DB or JDBC driver doesn't
support transactional approach, I mean: commit(), rollback() functions, so it reports setAutoCommit(false) as errorneous situation.
Paul -
I am getting an error when I connect my Ipod, I have used it on this laptop before but now it is saying "Ipod detected, but it could not be detected properly" Help please
You can try going through this troubleshooting document
iPod nano: Error message saying that iPod 'could not be identified properly' - Apple Support -
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it? I run my Itnues from this external and now my library is gone. Luckily I have it saved somewhere else, which is not a problem, but I won't be able to write to this HD for right now. I can't see an option to give those permission back.
cptjuanjvarona wrote:
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it?...
Unless what you have to transfer is enormous, skip the external HD altogether and use a USB flash drive; you can get them with capacities to 128GB. Format the flash drive as FAT32 or ExFAT as LowLuster suggests so it can be read and written to on both PC's and your Mac. -
Permission errors when using File Sharing
I am having permission errors when trying to transfer from Mac to Mac over the network using Filesharing.
I mount the other computer, but when I try to copy I get:
"You may need to enter the name and password for an adminstrator on this computer to change the item named "xxxxxx""
(but I am signed in with adminstrator accounts)...I click continue then get:
"The item "xxxxxx" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?" ....I click continue then get:
"The operation cannot be completed because you do not have sufficient privileges for some of the items"
thanksI had to reset the permissions on the "other" machine as well using the Installation boot disk.
That seem to fix the issue. -
-t2cGetCharSet error when using thick client with 1.0.0.15.57
I think I have found a bug in 1.0.0.15 related to accessing a database using the thick client. I have tested this with 1.0.0.14 release of SQLDeveloper and that version DOES work OK.
Simply put, I try connecting to a database using the 10g Client on Windows XP and I get "Failure: -t2cGetCharSet" error when running 1.0.0.15.57. I must use 10g thick client so that I can use encyption between the client and the database. 9i thick client doesn't work between Windows and Linux when using encryption. Also, instant client isn't an option; it doesn't support Advanced Security Option (encryption).
I DID test without encryption enabled to eliminate that as a possible cause and the results were the same.
If need be, I could back down to 1.0.0.14, but I would prefer not to.See:
Re: TNS Connection Issues
Raptor does not find My tnsnames
If don't to solve your problem, let us to know. -
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)
I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i) -
Malfunction error when I connect
Recently received an iPod from a friend. Everytime I try to connect the iPod [it's an 8g nano] I get the error message
'One of the USB devices attached to this computer has malfunctioned , and Windows does not recognize it.'
Not sure what to do. Any suggestiong? Also, no apple help topics have worked for me.
Thanks.
Compaq Presario Windows XPHi again, cupcake,
Let's try forcing your iPod into disk mode. To do that, follow the steps mentioned here:
Putting iPod into disk mode
With the iPod in disk mode, connect it to your computer.
If you still get a "USB device has malfunctioned" error when you connect your iPod, then let's try something else.
Make sure that your computer's USB drivers are up-to-date. And, in some cases, you may need to reinstall those drivers.
See this article for instructions on that:
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If that didn't work, then you can try reformatting your iPod to FAT32 in Windows, and see if that affects anything:
1 - Connect your iPod to your computer.
2 - When iTunes has finished syncing with your iPod, open "My Computer".
3 - Right-click on your iPod, and click on "Format". (If your iPod is not showing in My Computer, make sure that disk use isn’t enabled in iTunes).
4 - Here, verify that your formatting settings are "Default", with the format type set for FAT32. Also, make sure that "Quick Scan" is not selected.
5 - Then, click on "OK" to begin the formatting process.
6 - When this is complete (it might take a while), make sure to restore your iPod in iTunes again, so as to properly reload the firmware back onto it again.
Any success?
-Kylene -
"Could not complete scan" error when using Windows Fax and Scan
"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
MotorbikeYou can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Certificate Error when Trying to Install any Add-Ons
I am unable to install any extensions since going to version 13. Ive tried just about everything. Safe mode, uninstall, reinstall, deleting my profile etc. Each time all I get is a certificate error. Even if I go to the Mozilla add-ons site its blocked by a certificate error.
Using the portable version of Firefox does the same thing. Has anyone ever seen this before?
Here is an example of what I see.
http://i46.tinypic.com/2l9oa4w.pngHi,
I guess the picture did not work. The error I get is: This Connection is Untrusted, services.addons.mozilla.org. At the bottom it states: Technical Details
services.addons.mozilla.org uses an invalid security certificate.
The certificate is not trusted because no issuer chain was provided.
(Error code: sec_error_unknown_issuer)
I am using Eset Smart Security. 5.2.9.1 and Webroot Secure Anywhere version 8.0.1.193 -
When using Back to my Mac can I use a local printer to print from the remote Mac?
When using Back to my Mac to access an iMac from a MacBookPro all with the latest OS updates may I use a local printer connected to the MacBook to print a document located on the iMac? If so, how? It looks like if I try to print it will all happen on the iMac. Thanks.
PeterFazio wrote:
The problem is that when in screen sharing mode the print command is executed on the remote computer.
I appreciate that, but it will still list the printer in your local location if things are set up properly and if it is you can print, if it isn't you can't, but you should be able to print it as a pdf, transfer the file to your local computer and print it from their. -
Low power error when W530 connects to dock station 433815U
Hi,
Just got W530 2447 and dock station 433815U. From Lenovo website, 433815U should support W530. I got error message said power voltage is lower than laptop needs when I connect W530 to 433815U with dock station adaptor(90W). Any BIOS configuration or drive I need to configure or install to be able to 433815U?
One thing I also wanted to mention is I tried combination W530, 433815U with W530 adaptor(170W), it works.
Thanksyou mean you are getting error when using the 90 watts adapter with the dock? If that is the case, there is nothing you can do, other than to use the 135 watts or 170 watts adapter.
Otherwise, you have a modified power cable, which is not a Lenovo recommended accessories.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
Photoshop CS4 "Program Error" when using Text tool
Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
ThanksThats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks
Maybe you are looking for
-
An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and
-
Vista 64bit cannot install drivers for my new 80GB classic
Hi there, Vista cant install the drivers for my ipod. It seems to see a device then when it searches for the drivers it asks for a disc that came with the device ??? Does this actually knowingly work with vista 64 and if so how do i install the drive
-
Snow Leopard Server combined with Snow Leopard OS
I have a MacPro (4x1 TB Drives, 16GB, RAID Card, 2 x Quad-Core Intel Xeon 2.8 GHz) that has MacOS 10.5 installed (including MS Windows running under VMWare Fusion). The RAID setup is shown at https://www.radii.org/doc The computer is used as an every
-
One of our Team users cannot sign into CC desktop app on OS X 10.8.5
Every time of our CC for Team users tries to sign into the CC app in OS X 10.8.5 he just gets a message saying "You have been signed out" In addition, on startup of his iMac he also receives continuous popup messages saying that admin rights are requ
-
Flowed subforms not working with table
Hi, I am having trouble getting nested subforms to "flow" correctly, without the content of the top subform expanding on top of the content for the second subform. Here's my situation: I have a document saved in "dynamic format" that has 1 page, Page