CF 10 - IIS 7 - Set up an Access Data Source

How do we set up an Access data source with CF10 and IIS 7 in a 64 bit environment.
I have been away from CF for several years and things are a little different now.
I keep getting
Unable to update the NT registry. Variable DRIVERPATH is undefined.
-thx

ColdFusion doesn't support MSAccess in 64bit. Additionally, Windows doesn't currently ship with a MSAccess .accdb driver.
Please refer to http://blogs.coldfusion.com/post.cfm/coldfusion-10-64bit-and-msaccess

Similar Messages

How do I enable "Access data sources across domains" in firefox?

Couple of links do not work on my firefox however they work fine on IE. This is because the "Access data sources across domains" is enabled in IE and i am not sure on how to make this setting enable on Firefox as well.
Please provide the steps to enable "Access data sources across domains" setting in Firefox.
Please help!

This should add the permanent exception:
[https://support.mozilla.org/en-US/kb/connection-untrusted-error-message#w_bypassing-the-warning Connection Untrusted Error Message: Bypassing the Warning]
However if it is not staying until the next time that the user opens up Firefox, is it possible that they are in permanent private browsing? [[Private Browsing - Browse the web without saving information about the sites you visit]] - that should have instructions to get in and out of it.

Access data source from plugin

I have a recorded webtest. I added a csv file as data source in WebAndLoadTestProject. Now I added a PlugIn which containing several class for pre/post request override method. I want to access that added csv file as source of data and want to assign value
to context parameter or URL parameter created under request. From msdn blogs I did not find any solution.
What I want to know...
1. Is it possible to access data source files which is in WebAndLoadTestProject from PlugIn? How??
2. How can I assign context parameter with data from data source?
Thanks to every one...
R

Thanks for Adrian's help.
Hi SCRana,
Based on your issue, I know that it is possible to access data source files which is in WebAndLoadTestProject from PlugIn.
I find a similar thread about your issue, please refer the following thread to check this issue.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/a22708ec-77de-4851-84d3-f0096683c009/data-from-the-datasource-in-plugin?forum=vstswebtest
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem while displaying all the table names from a MS Access Data Source.

I started preparing a small Database application. I want to display all the Table Names which are in the 'MS Access' Data Source.
I started to executing by "Select * from Tab" as if in SQL.
But i got an error saying that "Not able to resolve Symbol 'Tab' in the query".
Please let me know how can i display all the table Names in the MS Access Dats Source.

Here i am developing the application in Swing using JDBC for accessing the database.
I want to display all the Table names from the data source in a ListBox for easy selection of tables to view their details.

Setting up an ODBC data source to connect to BerkleyDB

How can I set up an ODBC data source (DSN) to connect to BerkleyDB. I installed Berkeley DB 11gR2 (11.2.5.0.21) on Windows XP 32-bit and I can see the sqlite3odbc.dll in the installation bin folder but there seems to be no BerkleyDB ODBC driver listed in Windows ODBC Adminstrator app

Hi,
I'm afraid that we don't ship an installer with our initial release. It is possible to install manually, but it requires making some changes to the source code, building the ODBC driver and installing manually.
The steps are as follows:
<li>Edit the file db-5.0.21/sql/odbc/sqlite3odbc.c at line 15919 change "drivername" and "dsname" variables to contain the driver strings you would like to use.
<li>Follow the instructions to build the dll in the install guide here: http://www.oracle.com/technology/documentation/berkeley-db/db/installation/build_win_sql.html#id3371140. NOTE: You only want to follow the build steps here, not the configure or install steps.
<li> Once you have built the sqlite3odbc.dll file, you'll need to follow the manual install steps defined in the README here: http://www.ch-werner.de/sqliteodbc/README . Search for the section titled Win32 install/remove/shell by RUNDLL32
I hope this helps, let me know if you need further information.
Regards,
Alex Gorrod, Oracle Berkeley DB

Do not Extract from PSA but Access Data Source (for Small Amounts of Data)

Hi Experts,
In the DTP, the above option is available for Full Loads for certain extractors but not for others, particularly, certain HR extractors?
Is there a way to make it available for HR extractors? Is there a setting that needs to be updated in ECC or in BI?
Thank you for your help!

Hi,
There is no special setting for this, Please see the detail description:
Data is not extracted from the PSA for the DataSource; it is requested from the data source directly at DTP runtime.
Use
You use this mode for small data sets and full uploads, for example, small sets of master data. With file source systems, note that the file has to be available on the application server.
Dependencies
You do not have to create an InfoPackage in order to extract data from the source.
Data in the data source is accessed in "direct access mode". This has certain consequences, especially if you are extracting data from SAPI systems:
Data is extracted synchronously. This places a particular demand on the main memory, especially in remote systems.
The SAPI extractors may respond differently than during asynchronous load since they receive information by direct access.
SAPI customer enhancements are not processed. Fields that have been added using the append technology of the DataSource remain empty. The exits RSAP0001, exit_saplrsap_001, exit_saplrsap_002, exit_saplrsap_004 do not run.
If errors occur during processing in BI, you have to extract the data again since the PSA is not available as a buffer. This means that deltas are not possible.
In the DTP, the filter only contains fields that the DataSource allows as selection fields. With an intermediary PSA, you can filter in the DTP by any field.
Regards,
Kams

Problem in accessing Data Source Deployed in JBoss using JNDI

Hi everybody!
I need your help in the next question:
I have created a data source to connect to my MySql data base using the following entry in mysql-ds.xml (JBOSS 3.2.5)
<datasources>
    <local-tx-datasource>
        <jndi-name>MySqlDS</jndi-name>
        <connection-url>jdbc:mysql://localhost:3306/mytest</connection-url>
        <driver-class>com.mysql.jdbc.Driver</driver-class>
        <user-name>root</user-name>
        <password>1</password>
    </local-tx-datasource>
</datasources> in Eclipse SDK 3.1.2 i trying get access to the datasource
InitialContext initialContext = new InitialContext();
DataSource ds = (DataSource)initialContext.lookup("java:/MySqlDS");
if (ds != null) {
    result = ds.getConnection();
                   System.out.println("OK");
    else {
         System.out.println("Failed to lookup datasource.");
    } http://localhost:8080/jmx-console service = JNDI name equal "java:/MySqlDS"
I have error "Cannot get connection: javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial"
Error happen in
DataSource ds = (DataSource)initialContext.lookup("java:/MySqlDS");I trying
DataSource ds = (DataSource)initialContext.lookup("MySqlDS");and i had such error.
Can anybody help me?

hi,
please check is your error corrected
public class DBConnection {
     static DataSource dataSource = null;
     * To get the datsource
     public static DataSource getDatasource() {
          InitialContext ctx=null;
     if (dataSource == null){
     try {
          ctx=new InitialContext();
dataSource = (DataSource) ctx.lookup("java:/MySqlDS");
     } catch (Exception e) {
     System.out.println("eror in DataSource class"+e);
     try {
     ctx.close();
     } catch (Exception e) {
          System.out.println("eror in DataSource class context closing"+e);
     return dataSource;
     * To get connection from Database.
     public static Connection getConnection() {
               Connection con = null;
               DataSource dataSource = null;
               try {
                    dataSource =getDatasource();
                    con = dataSource.getConnection();
               } catch (SQLException e) {
                    e.printStackTrace();
               } catch (Exception e) {
                    e.printStackTrace();
               return con;
if you want a connetion then call Connection con=DBConnection .getConnection()
hope this helps you

OBIEE 11.1.1.6.2 BP1 64-Bit - Define MS Access Data Source

Hi
On our 11.1.1.6.2 BP1 64-Bit OBIEE installation I'd like to define an ms access db as data source. We had that in OBIEE 10G too but there it was an 32-Bit ODBC-Source.
It seems that OBIEE 11G only accepts 64-Bit ODBC-sources. But for 64-ODBC there aren't any existing ms access drivers.
Did anybody deal with the same problem and found a solution for it?
Regards

Hi,
you download AccessDatabaseEngine_x64.exe and install it then you can able to find it excel data source in 64bit version. (we too faced this issues few years back and test with windows server 2008) working fine.
you can download from below link
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Thanks
Deva

Setting Up an ODBC Data Source in Windows XP for PostgreSQL Unicode

Can someone help me setup an ODBC data source for a PostgreSQL Unicode database?
1. Under which tab(s) should I setup the Data Source: User DSN, System DSN, File DSN?
2. The check boxes on Advanced Options Pages 1 and 2, which should be checked?
I have Crystal Report XI, Windows XP, and PostgreSQL Unicode Version 08.1.0100.
Thanks!
Glynn

Here it is, there is an issue with our Search functionality with the new SDN:
Symptom
When setting location on a Crystal Reports XI Report using the Progress OpenEdge ODBC Driver in Crystal Reports 2008 or Crystal Reports 2011 get “Some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.”
Environment
Crystal Reports 2008 or 2011
Progress OpenEdge ODBC Driver
Reproducing the Issue
Open a Crystal Report created in CR XI Report using the Progress OpenEdge ODBC Driver in Crystal Reports 2008 or 2011
Set location to a new ODBC Data Source
Get error "some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.”
Cause
Crystal Reports XI only creates aliases for tables with special characters or duplicate names.
Crystal Reports 2008 introduces a change which requires aliases for all tables.
Aliases are not created when doing a Set Location on the whole data source.
If a Customer has hundreds of reports they cannot set location of each table and fix the aliases.
Resolution
Upgrade to Crystal Reports 2011 Support Pack 02 or higher
Under registry key [HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\Database\ODBC] create string UseTableNameAsAlias and set it to PGPRO1019.DLL, PGOE1022.DLL. Registry file is attached.
Keywords
Set Location
Progress ODBC
Crystal Reports 2008 2011

Access data sources supporting Tuxedo

WLS 5.1 states that it does not support two-phase commit.
In fact, if I try to establish two connections to different Oracle
databases within the same entity bean or session bean within a
transactional context then an exception is thrown.
I need to perform updates to two different resources, the first is an
Oracle database and the second is a Clarify CRM database.
The problem is getting the updates to both resources done atomically.
The Oracle database has a layer of EJB's and will run inside WebLogic.
The Clarify system only comes with a Java Bean interface (not an EJB
interface).
Obviously, at some point a connection needs to be established to the
underlying Oracle Clarify database and I suspect that the Java Bean
interface that Clarify provides will perform any transactional stuff per
method call. Although we may be able to detect Clarify problems through
exceptions thrown from the Java Bean methods, presumably for each
successful Java Bean method call the underlying data source changes
associated with it will be committed. Any subsequent Java Bean method
call that fails can too be detected but we have no way to roll back the
changes made in the previous method calls. This is obviously a typically
transaction based problem.
So, Clarify supports BEA Tuxedo, presumably for this purpose. Perhaps
someone can confirm, but I think that BEA Jolt provides a Java API to
BEA Tuxedo. Is this the currently recommended way to communicate with
Tuxedo? And does Jolt simply provide the equivalent XA methods such as
transaction start, prepare, commit methods etc?
I mentioned at the start that an exception will be thrown if an attempt
is made to open more than one database connection. Presumably, the
container will not be able to detect this if the connection is retrieved
in an independent Java class that is not part of the EJB? this is
important as BEA Jolt or the underlying Java Bean classes must at some
point establish a connection.
If Jolt provides this type of interface then presumable I could have a
stateless session bean that updates the first Oracle data source through
the EJB's and then simply starts a transaction using Jolt, then applies
the clarify changes using the Java Beans and then can use the two-phase
commit capabilities of Tuxedo to 'prepare' the Clarify changes. If the
prepare fails then a system exception will be thrown to rollback the
changes to the first data source, otherwise Jolt will be used to tell
Tuxedo to commit the changes and then the first data source will be
committed when the session bean method completes.
One drawback that I can see is that the transactional calls to Jolt will
be hardcoded in the beans and not controlled by transactional
demaraction in the deployment descriptors so we would need to be careful
when the transactional boundaries changes in the deployment descriptor.
I can't see how Weblogic 6.0 can assist us here as we don't have an EJB
intterface to Clarify.
How does the J2EE Connector stuff fit into this?
Anyone interfaced with Clarify through Jolt/Tuxedo - is the perfromance
adequate?
Many thanks in advance

Hi,
You can also have a look at Metalink Note:150766.1 :- Subject: How to Access a JDBC Data Source From OC4J Using a JNDI Lookup
Regards,
Sandeep

Access Data Source form Application Client

Hi All
i try to access oracle application server r3 emilated XA data source using aplication client.But it fails.if some one know how to do that ples let me know.
Note :- this works in other application servers (weblogic and websphere)
Thanks
Asanka Priyanjith

HI Avi
It is stand-alone java class that is outside of OC4J Package as JAR file. i Add application application-client.xml and orion-application-client.xml in to META-INF and add resource-ref element to XMLs as well. but it does not work. i am using oracle thin dirver in application server side.
relavent code is ..
DataSource ds = null;
Connection db;
try {
Context initCtx = getInitialContext();
ds = (DataSource) initCtx.lookup(name);
catch (javax.naming.NamingException e) {
if (!ignoreNamingException) {
throw new javax.ejb.CreateException(e.toString());
catch (Exception e) {
throw new javax.ejb.CreateException(e.toString());
db = ds.getConnection(); // This line does not works.
lookup works, But after that i can not get a connection.
java.lang.NoSuchMethodError: oracle.sql.CharacterSet.stringToASCII(Ljava/lang/St
ring;)[B
at oracle.jdbc.driver.DBConversion.stringToDriverCharBytes(DBConversion.
java:386)
at oracle.jdbc.driver.DBConversion.StringToCharBytes(DBConversion.java:4
52)
at oracle.jdbc.driver.T4CTTIoauthenticate.<init>(T4CTTIoauthenticate.jav
a:152)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:294)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
430)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
n.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
at oracle.oc4j.sql.DriverDataSource.getConnection(DriverDataSource.java:
116)
at oracle.oc4j.sql.DriverDataSource.getConnection(DriverDataSource.java:
75)
at oracle.oc4j.sql.DataSourceConnectionPoolDataSource.getPooledConnectio
n(DataSourceConnectionPoolDataSource.java:57)
at oracle.oc4j.sql.xa.EmulatedXADataSource.getXAConnection(EmulatedXADat
aSource.java:55)
at oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl.createXAConnection(M
anagedConnectionFactoryImpl.java:239)
at oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl.createManagedConnect
ion(ManagedConnectionFactoryImpl.java:198)
at com.evermind.server.connector.ApplicationConnectionManager.createMana
gedConnection(ApplicationConnectionManager.java:1333)
at oracle.j2ee.connector.ConnectionPoolImpl.createManagedConnectionFromF
actory(ConnectionPoolImpl.java:324)
at oracle.j2ee.connector.ConnectionPoolImpl.access$800(ConnectionPoolImp
l.java:95)
at oracle.j2ee.connector.ConnectionPoolImpl$NonePoolingScheme.getManaged
Connection(ConnectionPoolImpl.java:1209)
at oracle.j2ee.connector.ConnectionPoolImpl.getManagedConnection(Connect
ionPoolImpl.java:782)
at com.evermind.server.connector.ApplicationConnectionManager.getConnect
ionFromPool(ApplicationConnectionManager.java:1532)
at com.evermind.server.connector.ApplicationConnectionManager.acquireCon
nectionContext(ApplicationConnectionManager.java:1477)
at com.evermind.server.connector.ApplicationConnectionManager.allocateCo
nnection(ApplicationConnectionManager.java:1423)
at oracle.j2ee.connector.OracleConnectionManager.unprivileged_allocateCo
nnection(OracleConnectionManager.java:244)
at oracle.j2ee.connector.OracleConnectionManager.allocateConnection(Orac
leConnectionManager.java:198)
at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.jav
a:197)
at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.jav
a:142)
at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java
Thanks
Asanka

Setting up variable access for source control

Working on a few projects on my own I have used Team Explorer in Visual Studio Professional 2013 successfully for some time. I only use source/version control.
My default collection is hosted on visualstudio.com.
I now want to bring a second person, say Fred, who also has VS Professional, into the act in such a way that he can download but not modify my projects and I can download but not modify his.
Because all the projects are closely related, we each want to be able to quickly look at each others projects to see what has changed as well as being able to download them. I think this will be easier if all the projects are in the same collection.
Consider one of my projects, say "zxzx".
In the project control panel with the Security tab I can see:
Teams
zxzx Team
VSO Groups
Build Administrators
Contributors
Project Administrators
Project Valid Users
Readers
Under Permissions, I can see what each of these is allowed to do. "Project Administrators" and "Reader" seem relevant.
Under Members, I can see who is in each team and group.
I have myself in zxzx Team and Project Administrators, and Fred is in Readers.
When, in VS, I sign myself out and sign in as Fred. As Fred I can download all the projects and I can update them. That is not what I want.
I clearly don't understand the relationships between Collections, Projects, Teams and VSO Groups.
Help!
Thanks for any reply.

Hi Jeff,
Thanks for your post.
We can Deny the check in permission for user/group on separate folder(s)/file(s) in Source Control Explorer. In your VS>>Source Control Explorer, right-click on “zxzx” and select
Advanced>>Security…, then you can add Fred account in this opened dialog and deny his check-in permission in there.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to configure optimal data connections to allow excel to retrieve multiple data sets form a single data source

Hi all,
I would like to have a data connection file used by excel to extract data form a SQL Server DB (so that change in location of the DB needs only a change to the single data connection file). The excel file will retrieve data from only a single database,
but there are multiple queries (30+) stored on SQL server that are used - each SQL server views' data is returned to a pivot table in an excel worksheet, which has an associated chart with various slicers on the main dashboard worksheet.
Do I need a seperate data conenction file for each SQL server query being retrieved, or can a single connection file be created as all data comes from a single database?
(all my attempts and research on the net have led me to believe that a seperate file is needed for each view, but this seems unnecessary)

Hi, im learning my way with this, so apologies if I am providing too much or too little info.
There are 8 source files which are very loosely related in that they capture infromation regarding what has happened within a metro railway over a day. However there are only a few relationships between the contents of tehse files.
These tables are imported into SQL Server using SSIS where I have developed a number of views that query these 8 source tables to generate a number of metrics to provide insight into the service provided to the passengers. Some examples of metrics are: Number
of passengers in transit at any given time, time taken to travel between adjacent stations, how much power was used during the day, what distance did the trains travel during the day, etc. Some views provide only a handful of rows, some provide 1M plus. There
are now approx 40 seperate views created.
I have then used a spreadsheet with a worksheet associated with each SQL server view. Each worksheet is set up as a pivot table, which allows the related chart on the main dashboard worksheet to use standard excel capability to slice and present the data
in different ways.
At the moment if the server on which teh database is stored moves, I have had to recreate the spreadsheet from scratch as I dont know how to change the connection information in any other way. Ideally I would like to have connection info in a single place
to reduce ongoing maintenance, particularly as I would like to place the spreadsheet on a SharePoint server to distribute it to other users.
Thanks

Problem setting up Weblogic's data source for oracle

          Hi!
          I am trying to setup XA DataSource Pool for Oracle using Weblogic's driver. App-Server
          throws exception during startup.
          config.xml setting are appended with this posting.
          Can somebody help me identifying the problem?
          Thanks,
          Vinay
          <JDBCConnectionPool
          Name="WL_XA_1_Pool"
          Targets="examplesServer"
          CapacityIncrement="1"
          DriverName="weblogic.jdbc.oci.xa.XADataSource"
          InitialCapacity="1"
          JDBCXADebugLevel="1"
          MaxCapacity="5"
          Properties="user=vinay;password=vinay;dataSourceName=WL_XA_1_Pool;serverName=pqasun1"
          RefreshMinutes="0"
          ShrinkPeriodMinutes="15"
          ShrinkingEnabled="true"
          TestConnectionsOnRelease="false"
          TestConnectionsOnReserve="false"
          URL="jdbc:oracle:oci8:@PlatformTest"
          />
          [error_wl2.txt]


          Hi Dinu,
          Silversword is our upcoming maintenance release for WLS 6.0, and
          should be available in June timeframe.
          If you are only using 1 database instance, you can use Oracle's
          driver in non-XA mode in distributed transactions. Please refer
          to "Configuring non-XA JDBC drivers" section for details: http://e-docs.bea.com/wls/docs60/adminguide/managetx.html#1045803.
          -- Priscilla Fung, BEA Systems, Inc.
          "Dinu Ramanthara" <[email protected]> wrote:
          >
          >Hi,
          > What is Silversword?
          >
          > I need to use Oracle's Driver as I have to use Oracle
          >AQ and Oracle
          >AQ doesn't seem to work with jDriver. All my database
          >activity,
          >through AQ as well as through JDBC are restricted to the
          >same Oracle
          >instance. Given that what are my options? Should I use
          >Oracle 8.1.6
          >drivers or should I use 8.1.7 drivers.
          >
          >Is there a document/sample code illustrating what need
          >to be done
          >to bind Oracle's XADataSource to the JNDI tree.
          >
          >Regards,
          >Dinu
          >"Priscilla Fung" <[email protected]> wrote:
          >>
          >>Hi Vinay,
          >>
          >>A couple of things to note. Oracle 8.1.6's driver has
          >>a bug that
          >>does not accept foreign Xid, and thus cannot be used
          >with
          >>any 3rd
          >>party vendor's Tranaction Manager, including WLS. Oracle
          >>8.1.7's
          >>driver has fixed this problem, but they have threading
          >>issues.
          >> We have worked around the threading issues in Silversword,
          >>but
          >>not in WLS 6.0 release. For now, the only Oracle XA
          >driver
          >>we
          >>recommend is Weblogic's jDriver for Oracle.
          >>
          >>-- Priscilla Fung, BEA Systems, Inc.
          >>
          >>
          >>"Vinay" <[email protected]> wrote:
          >>>
          >>>
          >>>
          >>>
          >>>Hi!
          >>>
          >>>I am trying to setup XA DataSource Pool for Oracle using
          >>>Weblogic's driver. App-Server
          >>>throws exception during startup.
          >>>config.xml setting are appended with this posting.
          >>>
          >>>Can somebody help me identifying the problem?
          >>>
          >>>Thanks,
          >>>
          >>>Vinay
          >>>
          >>>
          >>>
          >>>
          >>> <JDBCConnectionPool
          >>> Name="WL_XA_1_Pool"
          >>> Targets="examplesServer"
          >>> CapacityIncrement="1"
          >>> DriverName="weblogic.jdbc.oci.xa.XADataSource"
          >>> InitialCapacity="1"
          >>> JDBCXADebugLevel="1"
          >>> MaxCapacity="5"
          >>> Properties="user=vinay;password=vinay;dataSourceName=WL_XA_1_Pool;serverName=pqasun1"
          >>> RefreshMinutes="0"
          >>> ShrinkPeriodMinutes="15"
          >>> ShrinkingEnabled="true"
          >>> TestConnectionsOnRelease="false"
          >>> TestConnectionsOnReserve="false"
          >>> URL="jdbc:oracle:oci8:@PlatformTest"
          >>> />
          >>>
          >>
          >

Editing a MS Access Data Source

1) I have a copy of Coldfusion MX 7 developers edition
running on my system. So my computer is acting as my local server.
2) I used Coldfusion Administrator to declare/link to the DSN
for the access database that I'm using.
3) All my pages that call for info from my database work on
my local server, but don't work when I upload them to my web
server.
QUESTION: How do I change the address of where the Coldfusion
Server looks for my DSN. Where is the code that points to the DSN
that you setup in Coldfusion Administrator?

You have to use ColdFusion administrator on your Web server
to declare the DSN. It's the identical process you did when you
established the DSN on your local server.

CF 10 - IIS 7 - Set up an Access Data Source

Similar Messages

Maybe you are looking for