CF Server TimeZone location

I am new to CF. I am having an issue were CF is displaying
the wrong timezone information. I have CF 6.1. If I run the
"setting summary" from the admin page the time that is says the
report is generated is wrong. I can not find the right place to
adjust that setting. The sever time is correct.
Does anyone know where that setting is pulled from?

insomnia169 wrote:
> Does anyone know where that setting is pulled from?
OS/JDK.
what does this report?
<cfscript>
tz=createObject("java","java.util.TimeZone").getDefault();
tzName=tz.getDisplayName(true,tz.LONG);
writeoutput("tz:=#tzName#");
</cfscript>
if it's not what you expect, make sure the OS's tz is set
correctly & set the
JDK's tz via system param:
- find the jvm.config file either in cf_root/runtime/bin or
jrun_root/bin
- make a backup
- find out teh tz ID you want
- carefully add the following to the end of the java.args
line
-Duser.timezone="your_TimeZoneID_goes_here"
- stop & restart the cf server service.

Similar Messages

  • Report Scheduling. How to syncronize the GMT and the local server timezones

    Hi everybody, I need to schedule reports using the Schedule tab on BIP, but I didn't still understand how the syncronization between my server's timezone and the GMT timezone works.....
    I noticed that when I open the Report Schedules initial page, this is refreshed using the GMT timezone as follows:
    Page Refreshed   Monday, July 26, 2010 7:53 AM GMT
    Actually I'm located in Athens (GMT+3)
    I noticed that if I want to Run once a report, ONLY the GMT is took in consideration.
    For example, I want to run a report at 11.30 (Athens timeone) where the time conditions are the following:
    BIP time (GMT timezone): 08.00 AM GMT
    server timezone: 11.00 AM (Athens time)
    So, if I want to run a report at 11.30 AM (Athens time), I have to write in BIP (Run once) 08.30 AM, instead of 11.30, otherwise if I put 11.30, the report runs 3 hours and 30 minutes later instead of only 30 minutes !!! This is very frustrating....because it means that everytime I need to remember that there is a difference of 3 hours and if I want effectively....
    I also set the Report Formatting Time Zone = GMT+03:00 to fill the gap between the GMT's timezone and Athens's timezone but it didn't work....
    I found that the variable <xsl:param name="_XDOTIMEZONE">GMT</xsl:param> is set into the tmpl.xsl; I tried to change it (GMT+3 or GMT+03:00), I stop and restart the BIP server....but nothing...the BIP timezone is always GMT (as showed by th Page Refreshed date and time).
    At the end my question is this: is there a way to modify the internal BIP timezone in order to fill the gap between this and the server timezone ?
    In other words, I'd like to see the page refreshed with the server timezone (Athens timezone) and not the GMT timezone, in order to schedule reports thinking directly my local server timezone (and not think always to calculate how many hours is the difference).
    This, I think is a common issue for everybody, but....I didn't find nothing in the forum....
    If somebody found a workaround, every help will be appreciated.
    Thanks
    Alex

    Good Morning Vetsrini,
    I know that the "Report Formatting Time Zone" is used to set the timezone properly INSIDE the report...but my attention now is concentrated on the Scheduling...
    As I mentioned before I'd like to find a way to syncronize the BIP timezone (based on GMT) and my local server timezone (Athens, GMT+2), and this I think it's possiblie only if I can modify the BIP timezone (GMT): instead to have GMT, I'd like to have GMT+2 in order to have the same time in both of systems.
    I already tried to change the variable <xsl:param name="_XDOTIMEZONE">GMT</xsl:param> into the tmpl.xsl, but it didn't work....
    I don't understand how all the others millions of BIP users who don't live in UK can use the scheduler keeping in mind always the gap between their local time and the GMT time set in BIP......
    Do you have another hint or workaround ?
    Thanks for your help
    Alex

  • Sun Java System Application Server installation location on windows

    Hi there...
    I'm just doing the "Your First Cup: An Introduction to the Java EE Platform" tutorial for the first time. I'm trying to add the Sun Java System Application Server in NetBeans IDE. It's asking me to select the Platform Location, and I have no idea where that is. No help instructions I've found say where it normally gets installed, and I've found now mention of it on the web.
    Can anyone tell me the location where this is supposed to be located? I HAVE installed the Java EE SDK 5 for Windows. The location it offers as a default is "C:\Program Files\glassfish-v2ur2\", but there is a red message at the bottom of the dialog that reads "Provide a valid Application Server Installation Location for 'Sun Java System App...". The Register Local Default Domain drop-down box has not options to select, either.
    I would try and search some more, but I just don't know what to search for. If anyone can offer any insight into this, I appreciate it.
    Thanks a ton!!!
    Orion Carrier

    I`ve posted a shorter version of the question in the hopes of getting a timely answer. Thanks

  • Best method for archiving .mpp files on a separate server or location?

    We want to be able to run a program or job on Project Server 2013 that will export all current published project .mpp files to a separate server or location on our network. What is the best, or suggested, method for something like this? Our managers want
    to have this job run on a weekly or bi-monthly basis in order to have backup files of each active project schedule. This would be beyond the Project Server archive database. This would be for Business Continuity purposes of having those schedules available
    should our servers ever crash. 
    Any help would be much appreciated. I am not a developer, but if there is code available for something like this we have developers in-house that can perform the work. 
    Thank you,
    Travis
    Travis Long IT Project Manager Entry Idaho Power Co. Project Server Admin

    Project server already has an archiving mechanism which backs up project plans based on schedule and maitains versions of it which can be restored at any point ? check administrative backup in central Admin under PWA settings
    However I wouldn't say this is the best method, but you can run a macro which would export all projects and save it at a location(could be network file share), Something like this (havent tested it recently with 2013 but i believe should work
    Sub Archiving()
    Dim Conn As New ADODB.Connection
    Dim Cmd As New ADODB.Command
    Dim Recs As New ADODB.Recordset
    'Connect to Project Server Reporting DB, Get Project Names
    Conn.ConnectionString = "Provider=SQLOLEDB;Data Source=servername;Initial Catalog=ProjectServer_Reporting;User ID=; Password=; Trusted_Connection=yes"
    Conn.Open
    With Cmd
        .ActiveConnection = Conn
        .CommandText = "Select ProjectName From MSP_EpmProject_UserView"
        .CommandType = adCmdText
    End With
     With Recs
        .CursorType = adOpenStatic
        .CursorLocation = adUseClient
        .LockType = adLockOptimistic
        .Open Cmd
      End With
    Dim prjName As String
    Dim ArchivePrjName As String
    Application.Alerts (False)
    If Recs.EOF = False Then
       Recs.MoveFirst
       For x = 1 To CInt(Recs.RecordCount)
        prjName = "<>\" + Recs.Fields(0)
        FileOpenEx Name:=prjName, ReadOnly:=True
        ArchivePrjName = "C:\Temp\" & prjName & "4Sep2014_9PM"
        FileSaveAs Name:=ArchivePrjName, FormatID:="MSProject.MPP"
        FileCloseEx
        prjName = ""
        Recs.MoveNext
       Next x
    End If
       Recs.Close
       Conn.Close
    End Sub
     Let us know if this helps
    Thanks | epmXperts | http://epmxperts.wordpress.com

  • WebLogic server home location

    I was trying to install WebLogic server 10 g.There I got page where they were asking to enter WebLogic server home location.
    Which ever location i am giving , it is showing not a server home location.
    Can you plz help me out?
    What does WebLogic server home location exactly mean?
    How to install WebLogic server 10 g?

    Hi,
    The WebLogic home is the root directory in which Oracle WebLogic Server is installed. A WebLogic Server home contains installed files necessary to host a WebLogic Server. The WebLogic Server home directory is a peer of Oracle home directories and resides within the directory structure of the Middleware home.
    The WebLogic home directory contains only product binary files that are mostly read only until the files are either patched or upgraded.
    mark if this helps you.
    Regards,
    Kishore

  • Where is "Web Server Instance Location" for SWSE installation in HP-UX?

    Hi there,
    We are using Siebel CRM SIA 8.1.1, our database version is Oracle 10g 10.2.0.2.
    For Siebel Web Server Installation in HP-UX, it will asked where is the location for "Web Server Instance Location" in HP-UX.
    Previously we also having problem for SUN Solaris, but there's a metalink on this (someone else raised it) and we manage to solve it.
    For HP-UX, we are using HP Web Server. According to bookshelf, we should use HP Apache Web Server?
    Kindly advice where is the location for "Web Server Instance Location" as per question in the installation.
    I believe our Web Server is installed in /opt/hpws.
    Regards,
    Rizwan

    Issues solved.
    Basically the location will /opt/hpws/apache32
    Currently Siebel 8.1.1 is only support apache32 bit.
    Things that need to consider, make sure you installing the same user as the user in apache32 folder.
    Means if you install apache32 as root, then you need to install SWSE as root.
    In my case, even thought i install as root, the apache32 folder will belong to BIN user. Not sure why.
    Then we had to install SWSE as bin user, then we manage to get the execution successfull msg.l
    Thanks

  • In azure cloud service with Location West Europe, why the IP address shows the server is locate in United States?

    We have 9 projects in azure cloud service, and all are use West Europe location, but with different subscription, and we found that one of those cloud service which its IP address is United
    States(Why?) and others are all in Amsterdam(this is correct)
    Can someone explain why? the server which it's ip located in United
    States is very slow, BTW i'm in Amsterdam.

    Hi LH,
    I have saw the same problem on Brazil. There has some comments about this issue, you can refer to it:
    Microsoft owns large ranges of IP addresses which are typically registered in Redmond, so usually Azure IP addresses around the world show up as being
    physically located in Redmond when using these types of tools.
    It's more or less an issue with the way our IP are registered. They all "belong" to Microsoft in the US and Brasil
    IP locator tools like whatismyip are sometimes incorrect. Some will give the real location, some will give the location of the ISP, etc …
    IP geo lookup tools typically rely on a static database of IP address range registrations.
    It's a Microsoft issue in the sense that we may publish the correct location for our datacenters
    (eg. Amsterdam should locate in Europe and not in Redmond…) – but it's also a 3rd party tools issue.
    If you want to be sure – use
    http://msdn.microsoft.com/en-us/library/windowsazure/dn175718.aspx 
     And you could also  see this blog about this issue :
    http://azure.microsoft.com/blog/2014/06/11/windows-azures-use-of-non-us-ipv4-address-space-in-us-regions/
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Java Server settings location in Config

    Hi
    Where do I find Java Server settings parameters like (-Xjvm:j9vm23,Xgcpolicy:gencon,Xms2048m etc) in Config tool..(Please note I need this for PI7.11 Config tool)
    Thanks
    Rajesh

    Hi Rajesh,
    Please find location in the config tool for updating Java System Properties : [Click Here|http://help.sap.com/saphelp_nwce711/helpdata/en/48/bdba8f50dd35bce10000000a42189d/content.htm]
    Hope this will helps you.
    Thanks
    Arun Jaiswal

  • FrontPage server extensions location in windows 2008 R2

    Hello,
    Do anybody know about where are frontpage server extensions are located in windows server 2008 R2 standard version for SharePoint 2013? I want to disable the extensions to see the impact in development server and then to apply it to production server. Also
    , if you know how to disable those extensions to protect downloading of CNF files from the server, please specify.
    Please Help.
    chirag

    i dont think you can disable it rather you can uninstall it.did you check the Add/remove program?
    check the links for more useful info.
    http://support.microsoft.com/kb/951039/en-us
    http://www.iis.net/learn/publish/frontpage-server-extensions/installing-the-frontpage-server-extensions-on-iis
    http://www.gregthatcher.com/Papers/IT/frontPage.aspx
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Apple server cannot locate 400 Gigabytes of Data

    Apple server been used for 11 months. Get Info on Server-HD shows 420 Gigabytes of 500 used. Yet when I use the tool WhatSize it shows only about 36 Gigabytes used. How would I go about locating/removing the missing data. Time Machine uses an external drive for backups. Thanks for any help with this. 

    Hi ibrahim,
    Please try to do the following steps:
    1. Install "1033\x64\SQLSERVER2008_ASADOMD10.msi" from
    http://www.microsoft.com/en-us/download/details.aspx?id=26728
    2. In the Application Management section of the Central Administration home page, click Manage service applications.
    On the Manage Service Applications page, click the Excel Services service application that you want to configure.
    On the Manage Excel Services page, click Data Model.Click Add Server.
    In the Server Name box, type the name of the Analysis Services instance that you want to add.
    3. Check the thread below:
    https://social.technet.microsoft.com/Forums/en-US/ecc18319-88d8-4dd0-bafd-fa0d2edceffb/external-data-refresh-failed-we-cannot-locate-a-server-to-load-the-workbook-data-model?forum=sharepointadmin
    More information:
    https://timpanariuovidiu.wordpress.com/2013/02/14/71/
    https://support.microsoft.com/kb/2769345?wa=wsignin1.0
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • Crystal Server File Locations

    I recently downloaded an evaluation copy of Crystal Server. It was installed using all of the default settings. Infortunately, the partition where the application resides is a bit short on space. There is another partion that has ample space.
    Should I reinstall the evaluation copy on the other drive or are there settings I can change?

    Hi John
    When we install the software the registry settings are updated accordingly.
    So best way to change the location is to uninstall the Software and Reinstall it on the different drive.
    Please refer to the note 1218535 - How to manually uninstall Crystal Reports XI.
    Hope this answers your queries.
    Please let us know if you have any further queries.
    Regards
    Ashwini Yadav

  • Bug report - OOB site column ArticleStartDate is crawled according to GMT0 not user/server timezone

    This issue can be reproduced easily on any SP2013 farm (on-premise) and I heard Sharepoint online do not have this problem.
    Issue: Site column "Article Date" with fieldname "ArticleStartDate" is crawled as GMT 0 regardless what timezone your web application, site setting, user setting and OS are set. Also when you submit a search you need to use GMT 0
    otherwise you will get wrong result. I believe it is bug because other datetime columns like "Modified" have handled timezone issue very well.
    To reproduce: On a SP2013 farm (on-premise), check your timezone settings (in my environment it is GMT+8). Then create a site collection and enable its Publishing Infrastructure feature. Then you will see some site columns are setup including "Article
    Date" (field name "ArticleStartDate"). Now create a custom content type and add some columns including "Article Date" to it. Create some sample items using the custom content type and remember fill in the value for "Article Date".
    By default it should allow you pick a "Date" only. After save the change you should see "Article Date" is saved like "2014-06-18 00:00:00" if check with powershell.
    After create some sample items start a full crawl. You will see find two crawled property "ows_q_DATE_ArticleStartDate" and "ows_ArticleStartDate" appear in Search Service Application -> Search Schema. There are some existing managed
    properties mapping to those crawled properties like "ArticleStartDateOWSDATE" (which is TEXT datatype).
    Here you can create some new managed property or use existing. Apply search using those properties to test. In my lab, I created "NewsArticleDate" as managed property and mapping to ows_ArticleStartDate. Then I create a blank
    page and add a "Search result" and "refinement panel" webpart and start some search. In the refinement panel added in the managed properties setup in previous steps. In the querystring I typed in something like /search.aspx?k=newsarticledate=YYYY/MM/dd
    It is what I see:
    1. As you can see in the refinement panel, because I am at GMT+8 and crawled index at GMT 0, the sample data "2014-06-18 00:00:00" will become "2014-06-17 16:00:00".
    2. Hence, in order to search out "2014-06-18 00:00:00"  item I have to input "2014-06-17" in search query! (in SP2013 the time part are ignored)
    3. By using the powershell provided by Ivan Josipovic (http://gallery.technet.microsoft.com/office/Get-Crawled-Property-names-9e8fc5e0), I can see the items
    ows_ArticleStartDate is "2014-06-18 00:00:00".
    I hope it is actually not a bug. Please let me know if my setting is wrong. Thank you!

    Hi Mark,
    According to your description, my understanding is that the Article Date column displayed with the value based on GMT0 in the Refinement web part.
    Microsoft SharePoint stores date and time values in Coordinated Universal Time (UTC, but also named GMT or Zulu) format, and almost all date and time values that are returned by members of the object model are in UTC format. So the value
    of the Article Date column stores the date and time in UTC format in the database, and the search indexes the UTC value of the Article Date column after crawling the database so that it displays the UTC value in Refinement web part.
    The list column values displayed in the lists that are obtained through the indexer for the SPListItem class are already formatted in the local time for the site so if you’re working on current context list item and fetch a datetime field
    like so SPContext.Current.ListItem["Your-DateTime-Field"] you’ll retrieve a DateTime object according the specified time zone in the regional settings.
    More references:
    http://francoisverbeeck.wordpress.com/2012/05/24/sharepoint-tip-of-the-day-be-careful-when-wor/
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Adding valid Application Server Installation Location

    I have gotten to this step for adding GlassFish V2 plugin.
    Next screen:
    Platform Location - "Box"
    Then radio buttons:
    Register Local Default Domain with Domains "Box"
    Register Local domain
    Register Remote domain
    Create Personal domain with Profiles "Box.
    I have no idea what to pick or what to type into the platform Location Box.
    Help please

    I`ve posted a shorter version of the question in the hopes of getting a timely answer. Thanks

  • Changing server timezone on two RAC machines

    Hi,
    I need to change the servers timezone in a RAC environment. the change is from GMT-0 to GMT+2.
    The question is, if this is going to work without shutting down oracle cluster or i need to shutdown the cluster before doing the change?
    Oracle version is 10.2.0.4, OS is Solaris 10, (using ASM).
    Thanks,
    O.

    Hello
    You must restart CRS to reflect new tz changes.
    Cheers,
    Rodrigo Mufalani
    http://www.mrdba.com.br/mufalani

  • Standby server archive location

    Hi
    I have created physical standby on windows 32 bit (9.2.0.6)
    The archives are shiipped to ORACLE_HOME\rdbms
    Even tough i have give a separate location for the archives in my pfile
    can some one help me in this regard
    Regards

    Hi,
    it would help if you show the parameter you have set that does not work as you expected.
    Well it has been a while since a dealt with 9i standby databases, but in an old initialization file for the standby db I have
    log_archive_dest_1='LOCATION=E:\PHYST\ARCHIVE'
    standby_archive_dest='E:\PHYST\STBY_ARCHThe first destination gets used if the standby DB becomes primary. The second destination gets used for the archived logfiles shipped from the present primary.
    Kind regards
    Uwe
    http://uhesse.wordpress.com

Maybe you are looking for