CF8 & MSDE SQL Server DSN Connection Error SOLVED!!!
Getting the following error trying to add a CF DSN to SQL
Server?
Connection verification failed for data source:
datasource_name
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing socket to host and port: localhost:1433.
Reason: Connection refused: connect
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]Error establishing socket to
host and port: localhost:1433. Reason: Connection refused: connect
There are several steps in order to make ColdFusion 8 and
MSDE SQL 2005 Server
1. TCP/IP is not enabled by default. When looking in SQL
Server Configuration Manager it appears TCP/IP is enabled by there
is a second place that it has to be enabled.
2. The TCP/IP port is dynamically assigned each time the
service is started, if they are no errors it the port number stays
the same but if there is an error the port number is dynamically
changed the next time the service starts.
3. You have to add your dsn login username and password to
the database in order to connect without using the sa username and
password.
Steps to get DSN setup correctly.
1. Open SQL Server Configuration Manager
2. Expand the SQL Server 2005 Network Configuration Group
3. Click on Protocols for SQLEXPRESS
4. Right click TCP/IP in the right pane and select properties
5. On the protocol tab under enabled set to yes and apply.
6. Disable dynamic port assignments by following the
instruction below:
If enabled, the default instance of the Microsoft SQL Server
Database Engine listens on TCP port 1433. Named instances of the
SQL Server Database Engine and SQL Server Compact Edition are
configured for dynamic ports, which means they select an available
port when the SQL Server service is started. When connecting to a
named instance through a firewall, configure the Database Engine to
listen on a specific port, so that the appropriate port can be
opened in the firewall.
To assign a TCP/IP port number to the SQL Server Database
Engine
In SQL Server Configuration Manager, in the console pane,
expand SQL Server 2005 Network Configuration, expand Protocols for
<instance name>, and then double-click TCP/IP.
In the TCP/IP Properties dialog box, on the IP Addresses tab,
several IP addresses appear, in the format IP1, IP2, up to IPAll.
One of these are for the IP address of the loopback adapter,
127.0.0.1. Additional IP addresses appear for each IP Address on
the computer. Right-click each address, and then click Properties
to identify the IP address that you wish to configure.
If the TCP Dynamic Ports dialog box contains 0, indicating
the Database Engine is listening on dynamic ports, delete the 0.
In the IPn Properties area box, in the TCP Port box, type the
port number you wish this IP address to listen on, and then click
OK.
In the console pane, click SQL Server 2005 Services.
In the details pane, right-click SQL Server (<instance
name>) and then click restart, to stop and restart SQL
Server.
7. Open Microsoft SQL Server Management Studio Express
8. Connect to your local copy of SQL Server
9. Expand the Security group
10. Right click login. Select new login.
12. Enter the dsn login name you want.
11. Choose SQL Server Authetication.
12. Enter the dsn password you want twice.
13. Disable user must change password at next login
14. Choose default database if you like.
15. Click User Mappings in left pane.
16. Click databases you want login to have access to.
17. Click ok.
You should now be able to add your CF DSN using localhost for
server and the port number you put in earlier. Default port number
is 1433.
You can view which port number SQL is listening to at this
registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL
Server\SQLEXPRESS\MSSQLServer\SuperSocketNetLib\Tcp
tcpport
You can test connectivity to the sql server by typing telnet
localhost 1433 or the port number you selected at a command prompt.
You should get a blank screen not an error.
Hope this helps, I spent 3 hours figuring it out.
David
I'm running into the same error with CFMX 7 and SQL 2000. The
port is set correctly (1433) in SQL, but it just can't communicate
successfully. SQL reside on a seperate server. Any thoughts?
Chris
Similar Messages
-
Content Server SQL Server 2000 Connection Error (very annoying)
All of the diagnostic tests are failing because of SQLServer connection error (see below for diagnosticTests.jsp output).
I checked database.content.properties file, all connection information is correct. The portal is running on the same SQL server. So I know that the SQL server is running just fine. I just could not isolate the problem. Can you help?------------------------------------------------------------------------
Content Server DB Connection FAIL
Settings JDBC Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver JDBC URL: jdbc:plumtree:sqlserver://OXO-SRV03:1433;DatabaseName=ptcsdb DB Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver DB Vendor: com.plumtree.content.rdbms.impl.VendorSqlServer User Name: ptcsdbuser Possible Resolution Check the Content DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Content DB Table CREATE and DELETE FAIL
Settings Unable to get a connection to the content server DB Possible Resolution Check the Content DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Also ensure that the Content Database Server is running. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Content DB Update and Query FAIL
Settings Unable to get a connection to the Content DB Table Name: PCSSYSTEM Column Name: CREATEDVERSION Possible Resolution Check the Content DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Also ensure that the Content Database Server is running. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Portal DB Connection FAIL
Settings JDBC Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver JDBC URL: jdbc:plumtree:sqlserver://OXO-SRV03:1433;DatabaseName=plumdb DB Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver DB Vendor: com.plumtree.content.rdbms.impl.VendorSqlServer User Name: plumdbuser Possible Resolution Check the Portal DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Portal DB Query FAIL
Settings Unable to get a connection to the Portal DB Table Name: PTUSERS Column Name: OWNERID Possible Resolution Check the Portal DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Also ensure that the Portal Database Server is running. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Document Repository OK Workflow Server FAIL
Settings Workflow Server Base URL: http://OXO-SRV03:7087 Content Server URL: http://OXO-SRV03:7777/ptcs Workflow Server Portlet URL: http://OXO-SRV03:7087/workflow Possible Resolution Verify that the Plumtree Workflow service has been started. Also, check the Workflow Serverdiagnostics for more detailed information. Error Details Exception Message: Cannot access Burlap service at [http://localhost:7087/wfserver/caucho/workflowsvc-burlap]; nested exception is com.caucho.burlap.client.BurlapProtocolException: org.springframework.remoting.RemoteAccessException: Cannot access Burlap service at [http://localhost:7087/wfserver/caucho/workflowsvc-burlap]; nested exception is com.caucho.burlap.client.BurlapProtocolException: com.caucho.burlap.client.BurlapProtocolException: at com.caucho.burlap.client.BurlapProxy.invoke(BurlapProxy.java:171) at $Proxy2.connectPortalUser(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at org.springframework.remoting.caucho.BurlapClientInterceptor.invokeDon't know if anyone is still having problems with this, but just in case...
I was getting a similar error. I had an Event Viewer record (It wasn't a Warning or an Error, just an Information) reading:You are running a version of Microsoft SQL Server 2000 or Microsoft SQL Server 2000 Desktop Engine (also called MSDE) that has known security vulnerabilities when used in conjunction with this version of Windows. To reduce your computer's vulnerability to certain virus attacks, the TCP/IP and UDP network ports of Microsoft SQL Server 2000, MSDE, or both have been disabled. To enable these ports, you must install a patch, or the most recent service pack for Microsoft SQL Server 2000 or MSDE from http://www.microsoft.com/sql/downloads/default.asp
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I installed SQL SP4 and it corrected the problem -
Sql server 2000 connection error
Hi everyone ,
I am trying to connect Sql server 2000 using ODI and trying to pass the parameters.
com.microsoft.jdbc.sqlserver.SQLServerDriver
jdbc:microsoft:sqlserver://localhost:1433;SelectMethod=cursor;databaseName=Northwind;integratedSecurity=false
username : sa
password : *******
error :
connection failed
com.sunopsis.sql.c: com.microsoft.jdbc.sqlserver.SQLServerDriver
can some one help me to make it worked out especially enabling IPaddress in Sql server 2000. both for the Server and network utility have 1433 as the port for tcp/ip .
ThanksFirstly, this message normally means that you do not have the JAR files for the driver in your classpath. The classpath is created dynamically at startup of the ODI process, so the jar needs to be in the drivers directory before you start.
Second, even if you are using SQL Server 2000, the recommendation is to use the SQL Server 2005 driver, available from the Microsoft site (http://msdn.microsoft.com/en-us/data/aa937724.aspx). It is much more capable and reliable. Note that you will need to use a different Driver name, and the URL format is also slightly different.
Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
URL: jdbc:sqlserver://[serverName[\instanceName][:portNumber]][;property=value[;property=value]] -
Hi,
while running jsp page i m getting error as follows:
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt..
what is this error...
what should i do to solve this problem...
plz let me know what is this error & how to solve this...
Thanx in advance....Why don't you do a search in google with the excpetion?
If you cannot then try this link
[http://www.idssoftware.com/faq-e.html] -
ERROR – SQL Server Login Failed, Error 11001
We have an application that uses MSDE as its ‘Back-end’.
It has been working fine for years. We have however had to recently re-build the Operating System on our own Server that it was running on.
Original O/S Environment
We used Windows Server 2008 r2, using
Hyper-V to run Windows Server 2003 so that we can use
MSDE to run our application.
We do not want to change to later versions of SQL Server Express as they no-longer support Replication.
NEW O/S Environment
When we re-built the Server we went for Windows Server 2008 r2, using
Hyper-V to run Windows 7 Enterprise so that we can use
MSDE to run our application.
We have used this setup many times before and know that MSDE runs quite happily under Windows 7.
Servers have been renamed
The real Windows Server 2008 r2 machine used to be called FILESERVER.
It is now called FILE-SERVER.
The virtual machine running our application was originally called GEMSERVER.
It is now called GEM-SERVER.
What’s happening on the Server
The application is running fine. We can access the underlying MDSE Database with SQL Server 2005 Management Studio Express without problem.
We can build a test ODBC Data Source and connect to the ‘SQL Server’ Database, again without problems.
What’s happening on the Client PC
The application does not connect. I get:
An error occurred while connecting.
[DBNETLIB]ConnectionOpen (Connect())SQL Server does not exist
or access denied.
When I build a ODBC Data Source to test the Connection I get:
Microsoft SQL Server Login
Connection failed:
SQLState: '01000'
SQL Server Error: 11001
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen
(Connect()).
Connection failed:
SQLState: '08001'
SQL Server Error: 6
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL
server not found
I can Ping GEM-SERVER from the Client PC without problems.
I have disabled Firewalls an Anti-Virus Software on both the GEM-SERVER and the Client PC – to no avail.
I’ve tried connecting with:
Named Pipes,
TCP/IP,
IP Address of GEM-SERVER – 192.168.16.122,
Using Specific Port 1433 in connection.
NONE of it worked. L
ANYBODY any ideas what to try next?Here's the solution that we came up with to our own problem:
This problem was actually caused by a bug in our own Application.
For some reason when we restored our MDSE Database the correct SQL Server Access Protocols were not setup correctly. (It is designed to handle these setup issues for us and has done so previously.)
We still have to determine why it happened and rectify the problem within our Software.
However to correct the problem with our own 'Server' we had to manually:
Run netsvrcn.exe using command prompt as an Administrator on the ‘Server’ running the MSDE Database,
Enable TCP and NAMED PIPES protocol
Restart SQL Server instance
Exclude the ports SQL Server normally listens on, from the firewall using ‘Windows Firewall Advanced Security’ for both in-bound and out-bound rules:
1433 TCP port
1434 UDP port
We then tested the ODBC connection from client machine and found that it worked fine, as indeed did our application.
However we still have a residual problem.
For we cannot connect to our Server called GEM-SERVER using GEM-SERVER\GEMSQLSRVR we have had to use 192.168.16.122\GEMSQLSRVR.
We are not sure why. We obviously wish to use the machine’s name rather than its IP Address, as its IP Address is dynamically assigned by a DHCP server so may change in future.
Do I need to raise this remaining problem as a separate issue? -
Hi All,
I am getting the following error when i am running swing program. I have a large volume of data. My resultset is running upto 2 hours. after 2 hours process is stoped and i got the following error on console.I am using Swing and MS SQL Server 2000.
Exception :java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]Unspecified error occurred on SQL Server. Connection may have been terminated by the server.
Exception :java.sql.SQLException: General error
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'F'
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'F' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:464)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:169)
Exception :java.sql.SQLException: General error
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:469)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:169)
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'F'
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'F' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'F'
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:474)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:169)
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'F' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'T'
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'T' order by tblTransaction.FareBasis
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:419)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:424)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'T'
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'T' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
java.lang.Exception: Invalid handle [null] Database error code:0
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'T'
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:429)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:434)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'T' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'F'
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'F' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closedjava.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:439)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'F'
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'F' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:444)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'F'
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'F' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'T'
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:449)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'T' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'T'
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:454)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'T' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'T'
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:459)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'T' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'F'
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:464)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:469)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'F' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'F'
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'F' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 4 : select count(*) from tblTransaction where AuditID = 10001720 and ExcludedFromAudit = 'F' and SystemPricedFare = 'F'
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.batchTransactions(GenerateAuditBatches.java:966)
at com.select.auditlink.GenerateAuditBatches.batchAudit(GenerateAuditBatches.java:474)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:172)
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
GenerateAuditBatches.java sql 5 transactions : select tblTransaction.BatchID, tblTransaction.TransactionNumber, tblTransaction.PrimeDocumentNumber, tblTransaction.AgentIATACode, tblTransaction.NetRemitInd, tblTransaction.ITBTFare, tblTransaction.TourCode, tblTransaction.FareBasis, tblTransaction.TransactionCode, tblTransaction.TransactionCategory, tblTransaction.InternationalOrDomestic, tblTransaction.NumberOfSectors, tblTransaction.TransactionStatus, tblTransaction.TransactionStatusUserID, tblTransactionCRSCheck.FareCorrect, tblTransactionCRSCheck.TaxCorrect, tblTransactionCRSCheck.CommissionCorrect, tblTransactionCRSCheck.ContractRulesCorrect, tblTransactionCRSCheck.ContractID from tblTransaction left join tblTransactionCRSCheck on tblTransactionCRSCheck.AuditID = tblTransaction.AuditID and tblTransactionCRSCheck.TransactionNumber = tblTransaction.TransactionNumber where tblTransaction.AuditID = 10001720 and tblTransaction.ExcludedFromAudit = 'F' and tblTransaction.SystemPricedFare = 'F' order by tblTransaction.FareBasis
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 1 : update tblAudit set NumberOfBatches = 1078 where AuditID = 10001720
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 12 query2 : select BatchID from tblAuditBatch where AuditID = 10001720
Exception :java.sql.SQLException: Invalid handle
Exception :java.lang.Exception: Invalid handle [null] Database error code:0
java.lang.Exception: Invalid handle [null] Database error code:0
at com.select.auditlink.GenerateAuditBatches.updateAuditBatches(GenerateAuditBatches.java:1427)
at com.select.auditlink.GenerateAuditBatches.run(GenerateAuditBatches.java:217)
GenerateAuditBatches.java sql 2 : update tblAudit set NumberOfAuditedBatches = ( select count(*) from tblAuditBatch where AuditID = 10001720 and NumberOfAuditedTransactions = NumberOfTransactions) where AuditID = 10001720
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
GenerateAuditBatches.java sql 3 : update tblAudit set NumberOfAuditedTransactions = ( select count(*) from tblTransaction where AuditID = 10001720 and Audited = 'T') where AuditID = 10001720
Exception :java.sql.SQLException: Invalid handle
Exception :java.sql.SQLException: Connection is closed
Exception :java.sql.SQLException: Connection is closed
Please give me suitable solution of this issue.
Thanks
Rajnish
Message was edited by:
rajnishsunjavajava.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]File must be opened exclusively.
In the Visual Foxpro table, I saw no READ ONLY settings.And also, there are
no delete permission grants and there is no user database sesssion concept.
The ODBC DSN for MYTABLE is setup as:
- Free Tables (not database)
- Null (checked)
- Deleted (checked)If you're using Visual Foxpro database(.DBC), you should see "Exclusive" option too. You can try check it, but I don't know whether your issue will disappear. -
Java - SQL Server 2000 Connectivity
hi all. i m looking for help in Java - SQL Server 2000 Connectivity.i worked on Java- Oracle & Java - MS Access format.now i m looking to work on Java - SQL Server 2000. I m using JBuilder 2005. can any1 help me how to make any change(configuration) in my SQL Server.thanx in advance.
http://www.jguru.com/forums/JBuilder is hopeless. ihvn;t get good replies from them.i downloaded the JDBC driver from microsoft and added the JAR files (3 files) and tried the following code:
import java.sql.*;
* Microsoft SQL Server JDBC test program
public class Test {
public Test() throws Exception {
// Get connection
DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());
//Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://<Host>:1433",<"UID>","<PWD>");
// Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://GMC01:1433;DatabaseName=MoonDB");
Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://Moon:1433;DatabaseName=MoonDB");
if (connection != null) {
System.out.println();
System.out.println("Successfully connected");
System.out.println();
// Meta data
DatabaseMetaData meta = connection.getMetaData();
System.out.println("\nDriver Information");
System.out.println("Driver Name: "
+ meta.getDriverName());
System.out.println("Driver Version: "
+ meta.getDriverVersion());
System.out.println("\nDatabase Information ");
System.out.println("Database Name: "
+ meta.getDatabaseProductName());
System.out.println("Database Version: "+
meta.getDatabaseProductVersion());
} // Test
public static void main (String args[]) throws Exception {
Test test = new Test();
it run without any error and then showed fatal exception as below:
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:193)
at Test.<init>(Test.java:11)
at Test.main(Test.java:31)
Exception in thread "main"
where's the problem?can any1 try to solve this plz. -
Oracle 10.2 to MS-SQL Server 2005 connectivity
Hi,
I Have oracle10.2 installed on windows server 2003 (server2) and MS SQL server 2005 on windows server 2005(server1).
Connectivity architecture
1. I have created the DSN in windows odbc drivers in server2 and tested (connectivity is successful).
2. Created Heterogeneous Services Initialization File called initbowmacnet.ora (same as DSN) made the changes as below
#SQL SERVER DSN
HS_FDS_CONNECT_INFO = "SERVER=10.1.1.2;DATABASE=bowmacnet"
HS_FDS_TRACE_LEVEL = off
HS_FDS_RECOVERY_ACCOUNT=oracle
HS_FDS_RECOVERY_PWD=oracle
3. Made changes to listener.ora as below.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
BOWMACNET =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.1.2)(PORT = 1522))
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = orasrv1.tlisoftware.com)(PORT = 1521))
4. Changes to tnsnames.ora file
BOWMACNET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.1.2)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = bowmacnet)
(HS = OK)
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = orasrv1.tlisoftware.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Unfortunately i am getting error connecting database
C:\>lsnrctl start bowmacnet
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-AUG-2008 01:59:47
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to E:\oracle\product\10.2.0\db_1\network\log\bowmacnet.log
Error listening on: (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.1.2)(PORT=1522))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Listener failed to start. See the error message(s) above...
C:\>tnsping bowmacnet
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-AUG-2
008 02:00:33
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
E:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 10.1.1.2)(PORT = 1522))) (CONNECT_DATA = (SID = BOWMACNET)) (HS = OK))
TNS-12541: TNS:no listener
kindly let me know what to do. please Help me out to resolve this issue
thanks and Regards
Prasad NThe listener must have the ip address/hostname of the machine where it is configured.
According to you configuration:
IP address 10.1.1.2 is for host orasrv1.tlisoftware.com.
Is this correct? Why don't you use the hostname as it was done for the listener with name listener? -
MS SQL Server ODBC Connection On Linux
Hi All,
I am badly stuck with configuration of MS SQL Server ODBC connection on SUSE Linux 10. I am almost tried everything I got from SAP notes but still getting ODBC Lib Data Direct drivers could not be loaded IES 10901.
ENV: SAP BO 4.0 SP7, MS SQL SRV 2008
Here is what I have tried so far:
1) Modified env.sh under /install_dir/sap_bobj/setup and added the line in bold.
":${BOBJEDIR}enterprise_xi40/linux_x64/odbc/lib:${BOBJEDIR}enterprise_xi40/$SOFTWAREPATH32/odbc/lib"
The line should look like this
LIBRARYPATH="$LIBDIR:$LIBDIR32:$WCSCOMPONENTDIR:$PLUGINDIST/auth/secEnterprise:${CRPEPATH64}:${CRPEPATH}:${MWHOME}:$PLUGINDIST/desktop/CrystalEnterprise.Report:
${BOBJEDIR}enterprise_xi40/$SOFTWAREPATH32/ras:${BOBJEDIR}mysql/lib:${BOBJEDIR}enterprise_xi40/linux_x64/odbc/lib:${BOBJEDIR}enterprise_xi40/$SOFTWAREPATH32/odbc/lib”
2) We have .odbc.ini file in the home directory of our BO user on linux. Added following DSN entry (Same DSN is created on client and odbc connection has been created on the universe using this DSN:
boeadm01:~> vi .odbc.ini
[DSN_NAME]
Driver=/opt/sapboe/sap_bobj/enterprise_xi40/linux_x64/odbc/lib/CRsqls24.so
Description=DataDirect 6.0 SQL Server Native Wire Protocol
HostName=SQL Server Hostname
Database=SQL DB Name
QuotedId=Yes
AnsiNPW=No
3) We then added the environment variables and LIBPATH in BO user .profile file.
boeadm01:~> vi .profile
#Sql Server Environment
ODBCINI=$HOME/.odbc.ini
export ODBCINI
LD_LIBRARY_PATH=/opt/sapboe/sap_bobj/enterprise_xi40/linux_x64/odbc/lib
export LD_LIBRARY_PATH
4) Did echo to check the LIBPATH
boeadm01:~> echo $LD_LIBRARY_PATH
/opt/sapboe/sap_bobj/enterprise_xi40/linux_x64/odbc/lib
5) Modified sqlsrv.sbo under /install_dir/sap_bobj/enterprise_xi40/dataAccess/connectionServer/odbc
<Parameter Name="Use DataDirect OEM Driver" Platform="Unix">Yes</Parameter>
6) Restarted BO node.
Tried creating a new webi report and got the error mentioned above.
Please help!!!
Thanks,
AnshulHi Anshul,
Please refer the below KBA & SCN thread regarding your issue.
Data Direct ODBC Drivers for SAP BusinessObjects Data Services
Link:
http://scn.sap.com/docs/DOC-8898
Business Objects XIR2 Link:
Link:
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50eca18b-d13e-2b10-a8ab-9738927177d6?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/20e11153-5c3f-2b10-f9be-974dc4749fd8?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/70eabcba-5c64-2b10-6db2-ae28ae4d1295?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/4039c80b-6b3f-2b10-64a4-e8e591292e89?quicklink=index&overridelayout=true
KBA:
1291142 - Web Intelligence reporting using DataDirect drivers in Unix
1292899 - Data Direct Drivers for Crystal Report in Unix environment
SQL Server ODBC Driver for Linux/Unix Getting Started Tutorial
Link:
http://www.easysoft.com/products/data_access/odbc-sql-server-driver/getting-started.html
Step by Step: Setting up Linux ODBC driver for SQL Server
Link:
http://blogs.technet.com/b/sqlman/archive/2012/08/03/step-by-step-setting-up-linux-odbc-driver-for-sql-server.aspx
Microsoft SQL Server ODBC driver for Linux
Link:
http://www.codesynthesis.com/~boris/blog/2011/12/02/microsoft-sql-server-odbc-driver-linux/
Thanks,
Daya -
Microsoft SQL Server 2014 Setup error: Wait on the Database Engine recovery handle failed
Hi,
Having this annoying error trying to install SQL Server 2014 (RTM). I saw it's been asked several times... But each post seems a different cause and no definitive answer...
I'm not doing an upgrade, so no "sa account" issue.
Tried different media. Even three different distributions: trial, Standard and Enterprise.
Tried disabling Microsoft antivirus/firewall.
Of course tried restarting, updating, installing, uninstalling, repairing, etc., etc.
I noticed the users folders under C:\Users weren't created. (Maybe something related to permissions?) After playing around, I managed for the users to be created and the service started. Though I couldn't log in.Summary for last "repair" attempt:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068578302
Start time: 2014-04-27 23:54:21
End time: 2014-04-27 23:59:48
Requested action: Repair
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for LocalDB: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: CHARLY13C
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered Configured
SQL Server 2012 DENALI MSSQL11.DENALI Database Engine Services 1033 Enterprise Edition 11.1.3128.0 No Yes
SQL Server 2012 LocalDB 1033 Express Edition 11.1.3128.0 No Yes
SQL Server 2014 HEKATON MSSQL12.HEKATON Database Engine Services 1033 Enterprise Edition 12.0.2000.8 No Yes
SQL Server 2014 HEKATON MSSQL12.HEKATON Full-Text and Semantic Extractions for Search 1033 Enterprise Edition 12.0.2000.8 No Yes
SQL Server 2014 HEKATON MSSQL12.HEKATON Data Quality Services 1033 Enterprise Edition 12.0.2000.8 No Yes
SQL Server 2014 Management Tools - Basic 1033 Enterprise Evaluation Edition 12.0.2000.8 No Yes
SQL Server 2014 Management Tools - Complete 1033 Enterprise Evaluation Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Connectivity 1033 Enterprise Evaluation Edition 12.0.2000.8 No Yes
SQL Server 2014 LocalDB 1033 Express Edition 12.0.2000.8 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
User Input Settings:
ACTION: Repair
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASCONFIGDIR: Config
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140427_235420\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
ENU: true
FAILOVERCLUSTERGROUP: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$HEKATON
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCENAME: HEKATON
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
QUIET: false
QUIETSIMPLE: false
SQLSVCACCOUNT: NT Service\MSSQL$HEKATON
SQLSVCPASSWORD: <empty>
UIMODE: Normal
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140427_235420\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84B40002
Error description: The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x2841E06E%401204%402&EvtType=0x2841E06E%401204%402
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84B40002
Error description: The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x2841E06E%401204%402&EvtType=0x2841E06E%401204%402
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84B40002
Error description: The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x2841E06E%401204%402&EvtType=0x2841E06E%401204%402
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140427_235420\SystemConfigurationCheck_Report.htm -
SQL Server sysadmin rights error
Greetings,
I am trying to install SCCM using a remote SQL configuration, and cannot get past this “SQL Server sysadmin rights” error. When I run the Prerequisite Checker, I put in the SQL server, since I am trying to connect to the SQL default instance, I am typing
in the server name only, and I put in LOCALHOST for the SDK server.
After reading another post that this error is not always accurate, I ran the install option and got as far as the following error.
Server environment is using the following: SCCM 2007 SP2 on Windows 2008 R2 SP1; SQL 2005 SP3 on Windows 2008 R2 SP1
I am sure the SQL server is configured accurately, I have done this before and use the following links when preparing the SQL server.
How to Install Configuration Manager Using a Remote SQL Server
http://technet.microsoft.com/en-us/library/bb693554.aspx
Appendix B: Configure Remote SQL for WSUS
http://technet.microsoft.com/en-us/library/dd939912%28WS.10%29.aspx
I have already added the machine account of the SCCM server to the local Administrators group of the remote SQL server as described in the first link above. The user account I am using for the install also has the
sysadmin SQL server role assigned.
Another test that I did to verify the remote SQL server configuration and my user account sysadmin rights, I ran the Prerequisite Checker from another Windows 2008 server in the domain.
As you can see from the screen shot above, this means something is messed up on my SCCM server and not the SQL server. The following error is from the ConfigMgrPrereq.log.
<03-29-2012 09:53:22> <<<RuleCategory: Access Permissions>>>
<03-29-2012 09:53:22> <<<CategoryDesc: Checking access permissions...>>>
<03-29-2012 09:53:22> Could not connect to SQL database.
<03-29-2012 09:53:22> SQL2005; SQL Server sysadmin rights;
Error; Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance targeted for site database installation or the SQL Server instance could not be contacted to verify permissions.
Setup cannot continue.
<03-29-2012 09:53:22> <<<RuleCategory: Access Permissions>>>
<03-29-2012 09:53:22> <<<CategoryDesc: Checking access permissions...>>>
<03-29-2012 09:53:28> LOCALHOST could connect to SQL server.
<03-29-2012 09:53:30> LOCALHOST; SMS Provider Communication;
Passed
I know there are plenty of options for verbose logging after installation, but does anyone know if there is a way to do this with the SCCM Prerequisite Checker, before installation? I checked the setup.exe command line switches and there was no option for
this.
Any other suggestions would be appreciated, Thanks.Yes, my user account is a member of Domain Admins, Enterprise Admins, and Schema Admins. The SQL Server service is running using a service account, and I have also registered the SPN. Below are copies of the log files.
Conents of the ConfigMgrPrereq.log.
<03-30-2012 09:10:03> ********************************************
<03-30-2012 09:10:03> ******* Start Prerequisite checking. *******
<03-30-2012 09:10:03> ********************************************
<03-30-2012 09:10:03> CPrereqManager: - Since Registry values empty, this is for fresh installation.
<03-30-2012 09:10:15> Executing prereq functions...
<03-30-2012 09:10:15> <<<RuleCategory: Access Permissions>>>
<03-30-2012 09:10:15> <<<CategoryDesc: Checking access permissions...>>>
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Administrative rights on site system; Passed
<03-30-2012 09:10:15> <<<RuleCategory: System Requirements>>>
<03-30-2012 09:10:15> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Unsupported site server operating system version for setup; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Domain membership; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Schema extensions; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Software updates KB911897; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Software updates KB912818; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Software updates KB913538; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Software updates KB914389; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Software updates KB925903; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Software updates KB932303; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; FAT Drive on Site Server; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Short File Name (8.3) Support (Site system); Passed
<03-30-2012 09:10:15> <<<RuleCategory: Dependent Components>>>
<03-30-2012 09:10:15> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Microsoft Management Console (MMC) version; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Minimum .NET Framework version; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Microsoft XML Core Services 6.0 (MSXML60); Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; WSUS SDK on site server; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; WSUS 3.0 SP1 is required on site server; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Windows Server 2003-based schannel hotfix; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Windows Remote Management (WinRM) v1.1; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; Microsoft Remote Differential Compression (RDC) library registered; Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; MMC updates for Configuration Manager (Software Updates); Passed
<03-30-2012 09:10:15> OAGCS-SUV-LDC; .NET update for Configuration Manager (Software Updates); Passed
<03-30-2012 09:10:15> <<<RuleCategory: Access Permissions>>>
<03-30-2012 09:10:15> <<<CategoryDesc: Checking access permissions...>>>
<03-30-2012 09:10:15> Could not connect to SQL database.
<03-30-2012 09:10:15> OAGCS-SAV-WTS1; SQL Server sysadmin rights; Error; Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server
instance targeted for site database installation or the SQL Server instance could not be contacted to verify permissions. Setup cannot continue.
<03-30-2012 09:10:15> <<<RuleCategory: Access Permissions>>>
<03-30-2012 09:10:15> <<<CategoryDesc: Checking access permissions...>>>
<03-30-2012 09:10:22> LOCALHOST could connect to SQL server.
<03-30-2012 09:10:24> LOCALHOST; SMS Provider Communication; Passed
<03-30-2012 09:10:24> <<<RuleCategory: System Requirements>>>
<03-30-2012 09:10:24> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<03-30-2012 09:10:24> LOCALHOST; Domain membership; Passed
<03-30-2012 09:10:24> LOCALHOST; Short File Name (8.3) Support (Site system); Passed
<03-30-2012 09:10:24> LOCALHOST; Installed version of WAIK (SMS Provider); Passed
<03-30-2012 09:10:24> <<<RuleCategory: Dependent Components>>>
<03-30-2012 09:10:24> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<03-30-2012 09:10:24> ***************************************************
<03-30-2012 09:10:24> ******* Prerequisite checking is completed. *******
<03-30-2012 09:10:24> ***************************************************
<03-30-2012 09:10:24> Updating Prerequisite checking result
<03-30-2012 09:10:24> Connecting to OAGCS-SUV-LDC registry
<03-30-2012 09:10:24> Setting registry values
Contents of the ConfigMgrSetup.log
<03-30-2012 09:10:03>
===================== << Starting SMS V4 SP2 Setup >> =====================
<03-30-2012 09:10:03> Commandline :
"E:\CM\CONFIGMGR07SP2_RTM_SELECT_ENU\SMSSETUP\BIN\I386\SETUP.EXE" /prereq /input
<03-30-2012 09:10:04> This is 64 bit.
<03-30-2012 09:10:04> Verifying the Reg for AssetIntelligence Installation
<03-30-2012 09:10:04> Setting the default CSV folder path
<03-30-2012 09:10:04> SMS Build Number = 6487
<03-30-2012 09:10:04> SMS Version = 4.0
<03-30-2012 09:10:04> SMS Minimum Build Number = 800
<03-30-2012 09:10:04> Verifying SMS Active Directory Schema Extensions.
<03-30-2012 09:10:04> DS Root:CN=Schema,CN=Configuration,DC=csdtest,DC=csnet,DC=gov
<03-30-2012 09:10:04> Verifying SMS Active Directory Schema Extensions.
<03-30-2012 09:10:04> DS Root:CN=Schema,CN=Configuration,DC=csdtest,DC=csnet,DC=gov
<03-30-2012 09:10:04> The command line options are /PREREQ
<03-30-2012 09:10:15> IsValidNetBIOSName validation of 'OAGCS-SAV-WTS1' succeeded
<03-30-2012 09:10:15> IsValidNetBIOSName validation of 'LOCALHOST' succeeded
<03-30-2012 09:10:15> Registered type OAGCS-SAV-WTS1 MASTER for OAGCS-SAV-WTS1 master
<03-30-2012 09:10:15> Registered type SMS Master for OAGCS-SAV-WTS1 master
<03-30-2012 09:10:15> Registered type OAGCS-SAV-WTS1 SMS_ for OAGCS-SAV-WTS1 SMS_
<03-30-2012 09:10:15> Registered type SMS ACCESS for OAGCS-SAV-WTS1 SMS_
<03-30-2012 09:10:15> Start prerequisite checking.
<03-30-2012 09:10:15> Could not connect SQL Server 'master' db.
<03-30-2012 09:10:15> Could not check if OAGCS-SAV-WTS1 is cluster SQL.
<03-30-2012 09:10:15> The prereq rules for primary site fresh installation are being run.
<03-30-2012 09:10:15> Verifying SMS Active Directory Schema Extensions.
<03-30-2012 09:10:15> DS Root:CN=Schema,CN=Configuration,DC=csdtest,DC=csnet,DC=gov
<03-30-2012 09:10:15> NtfsDisable8dot3NameCreation is set to 0.
<03-30-2012 09:10:15> Success in GetMMCVersion. Version is 3.0.
<03-30-2012 09:10:15> .NET Framework Version: 50727
<03-30-2012 09:10:15> The current user does not have access right to site OAGCS-SAV-WTS1.
<03-30-2012 09:10:15> The prerequisite checking stopped on this machine.
<03-30-2012 09:10:24> NtfsDisable8dot3NameCreation is set to 0.
<03-30-2012 09:10:27> Completed prerequisite checking. -
sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Error: [Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
hello,
our application vendors are receving the below errors while running their data load job.I spoke to our networking team member and he said everything looks good on the networking side .Can someone please help me with the below errors.we are using
Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64) Enterprise
Edition: Core-based Licensing (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1).
Windows OS:windows server 2008 R2 sp1
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
|Data flow DIM_CONTRACT_SWAM_INIT_LOAD_DF|Loader Key_Generation_DIM_CONTRACT
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
ODBC data source <HPWDBOE001> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
Driver][DBNETLIB]ConnectionWrite (send()).
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
[Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.>.
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
|Data flow DIM_EMPLOYER_GROUP_SWAM_INIT_LOAD_DF|Reader TCRdr_9
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
ODBC data source <serverName> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver]Protocol error in
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
TDS stream
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionRead (recv()).
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
[Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.>.
I googled and found the below link the below link which asked me to enable named pipes.I enabled
namped pipes in the sql server Network configuration.I havent yet restarted the sql services as this is a prod box.I will do it later in the evening today.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/69149a71-3c15-4c95-9f95-a30db458abeb/sql-server-2005-communcations-errors-through-odbc?forum=sqldataaccess
Can someone help me with these errors.
Thanks
luckyThank you Erland.
I dont see any crash dumps in sql server.I checked the tcp chimney and its set to automatic.I am not knowing what to look at to resolve this issue.
if its the issue with the client API can i ask our vendor to check the client?
Our networking member gave the following report:
No problems on vlan 14 or your port the top is from the switch to your server then bottom is from my pc to your server
SP_DC_CORE_VSS# ping 10.10.12.228
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.12.228, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
SP_DC_CORE_VSS#
lucky -
SQL Server Setup failure (Error code 0x858C001B)
Hola..
Vengo con un problema que me esta causando desesperacion, ya he buscado en los hilos y no puedo solucionar este problema.
Resulta que descargue la version de SQL Server Express 2012 64 bits y al quere instalarlo me muestra el error:
SQL Server Setup has encountered the following error:
The SQL Server license agreement cannot be located for the selected edition, EXPRESS. This could be a result of corrupted media or the edition being unsupported by the media.
Error code 0x858C001B
Ya he buscado y no encuentro respuesta.
SQL Server Setup failure (Error code 0x858C001B)Hi,
Can u have look at this Discussion
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Error in connecting SQL Server ODBC connection to Oracle 8i
I am tried connecting Oracle 8i on Windows2000 to SQL Server on Windowns2000 using ODBC. Sitting on Oracle server, in datasource(ODBC) when i give SQL servername and userid and password and click next, it gives error:
connection failed
SQL Server Error:1326
ODBC SQL Server driver(Namespipe)
client unable to establish connection
can anyone help urgently?<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by sanjayp patel ([email protected]):
I tried connecting Oracle 8i on Windows2000 to SQL Server on Windowns2000 using ODBC. Sitting on Oracle server, in datasource(ODBC) when i give SQL servername and userid and password and click next, it gives error:
connection failed
SQL Server Error:1326
ODBC SQL Server driver(Namespipe)
client unable to establish connection
can anyone help urgently?<HR></BLOCKQUOTE>
null
Maybe you are looking for
-
JavaScript Error in Sun Java System Messaging 6 with P1
I get a error messages when i click on a mailbox and it does not contain any messages. This concerns all mailboxes, INBOX, SENT, TRASH and DRAFTS. The error disappears when i get a messages och a draft in the boxes. Does someone know whats wrong in t
-
How to search for a device by IP Address in ACS 5.1
Hi, I have over 800 devices added to the ACS 5.1. Now if i have to find a device for any purpose in the Network Resources>Network Devices and AAA Clients>. I can only filter using Name, NDG Location/Device Type, and description. Is there a way to fin
-
New laptop, library is gone
So i got a new laptop and my library is just gone, how do i get it back?
-
I am trying to extend the oracle.apps.icx.por.req.webui.ReviewSubmitCO. I understand that I go to personalize page and type in the new name with the new class dms.oracle.apps.icx.por.req.webui.dmsReviewSubmitCO. However, I must be missing a step beca
-
When adding a reminder from an Email.
Since updating to 10.10.1 I notice that a "New List" is created every time I "add a reminder" by highlighting text in an email. The "New List" contains the reminder but this behaviour is not correct, it is supposed to add the reminder to the Reminder