CFGrid tag not displaying background color

Hi, My application runs on CF v 4.5 and uses CFGrid tag to
display grids. When I run the same code on MX 7, the grid does not
display the pale yellow background for the grid as it does on 4.5.
Does anyone know how to fix this ?
Thanks, Jay M.

Hi CatJay
I looked at the code you sent and it has no attribute in
place to display any color in the background, so I am guessing that
maybe back in 4.5 there was only 1 colour by default?
Try adding bgcolor="#ffff00" to the cfgrid tag and see if
that changes the colour to yellow. (it should)
Once you get that to work, you can implement any colour you
want.

Similar Messages

  • Div header tag - not displaying correctly

    I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not!
    The header contains three images; a logo, a banner (text), and a picture of a castle.  These should display in a  line.
    When I first set it up, I realised that the castle picture was normally ending up below the other two on smaller screens etc. 
    So I changed the dims for my div container from min 760px/max 1260px, to a set width (960px).  I then rejigged the three images so the widths were within 960px, with some to spare for the spacing (total widths of the three are 900: hspacing another 20 pixels).  There is no padding/borders defined.  Therefore the total should be well within the 960 width (?).
    It looks fine on my PC (widescreen); in 3 browsers, using the restore down menu command (ie to make it not full screen), and by  using the Dreamweaver multiscreen preview (phone, tablet, smaller desktop).  It wasn't ideal (as scrolling required), but at least meant the header (and the rest of the screen) displayed correctly, ie in a horizontal line (and then sidebar - content - sidebar).
    If I set my container width much smaller, most of the screen will be green (the body) in big screens.
    If I rejig the dimensions, it's all a bit hit and miss (and why don't the current dimensions work?).
    Do I need to define the width of the header (as well as the container)?
    Help!  Thank you
    http://hertfordcarnival.org.uk/dev/Index.html

    Hi there, I started off using one big image, but it didn't look right with regards to size and placing (ie I wanted the logo on the left edge, the castle on the right edge, etc). When you say slice, what do you mean?  One image in from fireworks, and then ... ? Thanks again
    Date: Wed, 7 Dec 2011 01:37:10 -0700
    From: [email protected]
    To: [email protected]
    Subject: Div header tag - not displaying correctly
        Re: Div header tag - not displaying correctly
        created by osgood_ in Dreamweaver - View the full discussion
    Datafan55 wrote: I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not!  Why not just use one big image  then you wont have a problem of with the alignment. Certainly don't use 'vspace' and 'hspace' to position the images. If you want to use 3 seperate images start by setting them us as one complete image then slice it into 3 images. Then use the following css to position the images side by side. #header img If the total sum of the width of the images is the same or does not exceed 960px then the images should be in a nice row side by side. They will actually sit side by side without using 'float' but you'll get a small gap between them which will be added to the sum of the width which will exceed 960px causing the third image to drop onto the next line.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4068499#4068499
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4068499#4068499. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • GPO to set display background COLOR

    Need to set the display background color with a group policy.  Found what seemed a good example to follow but nothing happens.
    http://serverfault.com/questions/213641/how-to-force-background-colour-with-gpo-centred-wallpaper
    Any assistance is appreciated.
    Windows 7 sp1 PC

    You could create a theme that includes the background of your choice, then share it using group policy.  Follow these steps to create the theme:
    http://www.winhelponline.com/blog/share-theme-with-all-users-windows-7/
    The Windows 7 GPO to "Load a specific theme" is under User Configuration --> Administrative Templates --> Personalization, which can be set to point to a shared location that contains the theme.  The drawback here is that existing user
    profiles will ignore this setting.  Only new users logging into the workstation for the first time will execute it.  So to convert existing users, you would need to push out a registry change that points to the new theme.
    In addition, you can also set "Prevent changing theme" and "Prevent changing desktop background" to keep the settings locked.

  • DW 8 not displaying background image in a tag

    Hi,
    New to DW 8.02 on a WinXP Pro machine. I'm finding that DW 8
    (and DW MX2004) will not display a background image inside an
    <a> tag. Attached is an example code. The page displays
    correctly in IE 6, FF 2, Opera 9, etc, etc. But in design mode in
    DW 8 I can't see the graphic at all.
    Is there a way to have DW display the graphic? Is this a bug
    in DW?
    Thanks,
    Doug

    It looks like a bug. I am checking....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "PegasusT4" <[email protected]> wrote in
    message
    news:eil1b0$7al$[email protected]..
    > Here's the code to cut and paste into DW. I only have it
    on my dev server
    > as I
    > was just playing around with background images and ran
    into the problem.
    > Just
    > replace the mail.gif with a graphic of your choice. The
    problem is NOT on
    > the
    > server, it's with DW not showing the graphic.
    >
    > Thanks,
    >
    > Doug
    >
    >
    >
    >
    > <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
    Transitional//EN"
    > "
    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    > <html xmlns="
    http://www.w3.org/1999/xhtml">
    > <head>
    > <meta http-equiv="Content-Type" content="text/html;
    charset=ISO-8859-1" />
    > <title>Little George</title>
    >
    > <style type="text/css">
    > #legalstuff a {
    > background: url(images/email.gif) no-repeat left center;
    > padding-left: 20px;
    > margin-left: 10px;
    > height: 1%;
    > }
    > </style>
    > </head>
    > <body>
    > <div id="legalstuff">Copyright 2006,
    Littleman.com. <a href="mailto:
    > [email protected]">E-mail for more
    information</a>. </div>
    >
    > </body>
    > </html>
    >

  • IGS issue , not showing background color.

    Hello ,
    I have bulid a dashborad on which we are showing businees graphic as speedometer.
    Now problem is  i want to change the background color where my speedometer is placed..
    process i followed is :
    right clicked on Business graphic element and clicked on Edit Customizing.
    than in the overview tab i choose "Background" and in the Broder properties i have given different colors code.
    But when i run my application no color gets display....
    Few plp suggested to add some tag in the IGS.XML , i dont know what to add in it..
    this IGS basis people took from the server and gave to us ...
      <?xml version="1.0" ?>
      <!DOCTYPE kernelPatches (View Source for full doctype...)>
    - <kernelPatches name="BC-FES-IGS" vendor="sap.com" sequenceFile="IgsTasksSequence.xml" sequence="process">
    - <os code="*">
    - <cmdVersion extractor="SAPCAR" archiveId="IGS" cmd="igswd">
      <arg value="-version" />
      </cmdVersion>
      <sar name="IGS.SAR" pattern="IGS.*\.SAR" dir="igs" id="IGS" manifest="igsmanifest.mf" opCode="X" required="Y" />
      <sar name="SAPCAR" opCode="C" required="N" dir="igs" />
      </os>
    - <os code="WIN">
    - <cmdVersion extractor="SAPCAR.EXE" archiveId="IGS_WIN" cmd="igswd">
      <arg value="-version" />
      </cmdVersion>
      <sar name="IGS.SAR" pattern="IGS.*\.SAR" dir="igs" id="IGS_WIN" manifest="igsmanifest.mf" opCode="X" required="Y" />
      <sar name="SAPCAR.EXE" opCode="C" required="N" dir="igs" />
      </os>
    - <os code="OS4">
    - <cmdVersion extractor="SAPCAR" archiveId="IGS_OS4" cmd="igswd">
      <arg value="-version" />
      </cmdVersion>
      <sar name="IGS.SAR" pattern="IGS.*\.SAR" dir="igs" id="IGS_OS4" manifest="igsmanifest.mf" opCode="X" required="Y" />
      <sar name="SAPCAR" opCode="C" required="N" dir="igs" />
      </os>
      </kernelPatches>

    Also somtimes when i click on Edit customizing it saying
    Information message as
    Object 'D6RX8LV20IZIFHIS257Y3W2LS.xml' not found
    as part of address
    'sap/bc/webdynpro/zwdsmf_dashboard//D6RX8LV20IZIFH
    I'
    Please help.

  • 4 random Rows of pixels not displaying correct colors RetinaMBP mid 2012

    Dear community, I noticed that my 15' Retina MacBook Pro, mid 2012 has some retina screen issues. As mentioned, 4 randomly possitioned rows (from side to side) of pixels have difficulty displaying the correct colors. It is unnoticable on light and dark backgrounds/images. However when you have color, they show clearly. Two of the rows appear lighter than the image color, the other 2 darker. Sometimes the color is completely different. It also happens under Windows7 Bootcamp and does not display on external monitors = Hardware failure. I have never ever droped, pressed, hit or abused my RMBP, expecially the screen.
    Has anyone heard or experienced similar issues?
    What could be the problem? Would be okay for a few dead pixels but those are 4 whole rows of pixels. Also they all seemed to fail at ones, not 1 row at a time.
    Thanks.

    Run your page through the validator here: http://validator.w3.org
    You have some structural defects in your code that should be taken care of. If it's still not working once you have the code cleaned, post back and we can take a closer look.

  • HDMI output to monitor not displaying all colors

    I am trying to use a second monitor on my Satellite S55t-b5152 and am able to get 1920x1080 output from the HDMI port through an adapter to either VGA or DVI into my external monitor, but with either adapter the colors look washed-out and not all the colors that are displayed on the internal monitor show up on the external monitor.  For example the position indicator in scroll bar on some apps shows up on the internal monitor, but disappears when I drag that window onto the external monitor.  I've tried multiple monitors and they all have the same symptom. I've investigated this some on external forums and it seems to be that the HDMI output under some conditions assumes that it is connected to a TV instead of a monitor and it limits the output color range.  On some graphics drivers it is possible to override that assumption and get the full range output from the HDMI port.  I haven't found a way to do that for the graphics driver on the S55t-b5152. Has anyone figured this out?

     
    Satellite S55T-B5152
    through an adapter to either VGA or DVI...
    Just want to comment that I'm not at all surprised that an adapter does not produce true colors. I'm sometimes amazed they work at all.
    Yours is HDMI 2.0 which complicates things still further.

  • Firefox 5 not printing background (colors and images) despit it's selection in Page Setup. Previous version worked fine.

    I upgraded to FireFox 5, but it is not printing background (images and colors) for certain pages which previously printed fine with my earlier version. Print Preview DOES shows the background images, but when sent to printer or PDF, background images do not appear in the printed output.

    I wish it were that but a long time ago when I had a problem with the gadgets with iGoogle back 6 months ago thereabouts I was asked to disable it then and I did and I just went to re-check and it is still not enabled, however, it will not let me un-install it though.. It only gives me an option to enable or disable.. Any advice ? So I'm wondering if it is something else still or is there a problem with the avast still ?
    thanks again for your help. Mind you that this all started when blogger went down ..
    take care

  • Photoshop CC not displaying 30bit color

    PS CC does not seem to display 30bit color as per the Ramp.psd file from AMD. PS CS6 displays 30bit color just fine. I've seen other posts and problems with AMD FirePro cards but I have an Nvidia Quadro K2000 and I an having the same problem. Has there been any progress on identifing this isuue. Thank you.
    NEC PA272W w/displayPort
    Nvidia K2000
    Win 7 Pro 64bit/no aero
    30bit color turned on in Pref's
    "Deep Color" on in driver

    For generic performance and trouble-shooting advice I’d like to recommend reading these:
    http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    As for the specifics:
    The image size is 4.31M. If I go to double the size and change nothing else, the image size jumps up to a whopping 17.2M.
    If you double the dimensions of an image the area is increased fourfold – so what is the problem there?
    The image dimensions are 500px x 135px, 300DPI, 8bit, RGB color. This is at 100% zoom. Those are the settings I normally use, but for some reason it’s showing the file as about half of the size it should be. (Tumblr post for comparison—they are 500px wide.)
    The introduction or Retina (and other high resolution) displays and browsers actually up-scaling images to accommodate those screen resolutions seems to have confused some users about the concept of pixels.
    Could you please post a full size screenshot on this Forum of the image at View > 100% in Photoshop and on tumblr?

  • HTML tags not displayed when using Data Template

    Hi All...
    I'm developing a BI Publisher report in which one of the columns is a clob data type. I'm using an xsl stylesheet to format the data present in the clob column.
    I've developed the report using data template as the data set. The problem is the clob column which has the HTML tags where not displayed properly...for example
    the tag starting with
    <
    is replaced with
    & lt;
    I did a couple of searches in this forum and in tim's blog but couldn't find a proper solution...
    http://blogs.oracle.com/xmlpublisher/2007/01/formatting_html_with_templates.html
    API and HTML Formated Content
    Re: Problem with text data elements containing escaped HTML codes
    HTML Output from CDATA
    Re: HTML formatted output
    Re: Special characters in CLOB are making report fail
    Re: Formatting of HTML tag problem
    I'm using BI Publisher standalone:Release 10.1.3.2. In one of the threads..
    Re: Special characters in CLOB are making report fail
    I came to know that data template cannot generate proper HTML tags for release 10.1.3.2. Is there any work around way to get the proper HTML tags when data template is used as a data set?
    Thanks in Advance...
    Edited by: user10280715 on Dec 9, 2008 3:13 PM

    Issue could be with the data that is selected in the other environment. It generally happens that the ALV will not give the same results as in the DEV in the other systems.
    Possible errors could be the control break statements in the loop...endloop block. validate the correctness of the control break stmts if any.

  • ID3 Tags Not displaying

    Good Morning all,
    I just imported a few hundered songs (MP3's converted from flacs) into iTunes and set up the artists, albums, genre, track #, etc. for each song. When I look at the songs in the music folder, these new song's tags do not display. I have several thousand songs and almost all of them have these tags displaying properly in the folder's columns. However, these songs do not. Is there a way to get the tags I entered in iTunes to show up for these songs in the folder without having to manually edit each one (there are hundereds)? I have never had this problem before. In the past whenever I edited a song in iTunes, the updated tags showed in my folder just fine. I am using windeows Vista. Any thoughts?

    No one has any information on these?

  • Tag not displayed

    Hi all
    I am running a script
    BACKUP
    INCREMENTAL LEVEL 1
    FOR RECOVER OF COPY WITH TAG 'incr_update'
    DATABASE;
    RECOVER COPY OF DATABASE
    WITH TAG 'incr_update';
    After the backup is run. I issue a LIST BACKUPSET command.
    RMAN> list backupset;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    10032 Full 7.55M DISK 00:00:01 29-JUN-09
    BP Key: 10033 Status: AVAILABLE Compressed: NO Tag: TAG20090629T153750
    Piece Name: /oracle_db/database/flashback/CDSDEV/autobackup/2009_06_29/o1_mf_s_690824270_54jnsgxc_.bkp
    Control File Included: Ckp SCN: 8281502719147 Ckp time: 29-JUN-09
    SPFILE Included: Modification time: 23-JUN-09
    This output does not show the tag 'incr_update'. How would I know which tag is used if the script does not display the correct tag.
    Thanks in advance

    It's a tag of copy, not a backupset made for recover.
    try
    list copy of database tag='incr_update';
    However, this: 'Piece Name: /oracle_db/database/flashback/CDSDEV/autobackup/2009_06_29/o1_mf_s_690824270_54jnsgxc_.bkp' it's a autobackup with only controlfile and spfile inside.
    You can't specify tag for autobackup as far as I know, but You can search here:
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta009.htm#RCMRF107
    cheers

  • JTextPane not keeping background color!

    Hi. I developed a text editor for a forum I'm developing. I have also integrated PHPspell into the project. To get PHPspell to interface with it, I use JavaScript to copy the HTML from the JTextPane into an I-Frame, which I then pass to PHPspell. Then, once the corrections to the document are made, it is passed back into the JTextPane control.
    This works properly, but when I use the getText() method of the JTextPane, I lose my background colors! They don't even show up in the HTML code from getText() (but they show up in the JTextPane.)
    Here is how I set the background color of the text:
            if ((defaultPane.getSelectionEnd() - defaultPane.getSelectionStart()) != 0)
                javax.swing.text.html.HTMLDocument tempDocument = (javax.swing.text.html.HTMLDocument) defaultPane.getDocument();
                javax.swing.text.SimpleAttributeSet style = new javax.swing.text.SimpleAttributeSet();
                javax.swing.text.StyleConstants.setBackground(style, color_chooser.getColor());
                tempDocument.setCharacterAttributes(
                    defaultPane.getSelectionStart(),
                    defaultPane.getSelectionEnd() - defaultPane.getSelectionStart(),
                    style,
                    false);
            defaultPane.requestFocus();Hope someone can help me.

    Whoops...just realized that I accidentally posted this message twice. Sorry about that. :(

  • Display does not display any color

    I have just installed the latest Java for Mac OS X 10.5 Update 4 and all the color has disappeared from my display, hence everything is in black and white. I am not absolutely certain but I think that is the last thing I did before the color disappeared. I have run ColorSync Utility and the first aid profile log has found an item to be incorrect but is incapable of crrecting it, claiming that it is locked when it is not. It says
    "/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
    Tag 'desc': Tag size is not correct.
    The file is locked. Could not be fixed."
    I have also run repair permissions in Disk Utility a number of times. Each time it claims to have repaired a long list of permissions but when I rerun it, it still has to repair the same long list of permissions.
    When i log in or restart I have full color so it is only a software problem. I have checked settings in System preferences and they haven't been changed and are set for millions of colors.
    Any ideas on what's wrong and how it can be fixed.

    dysong2 wrote:
    I have just installed the latest Java for Mac OS X 10.5 Update 4 and all the color has disappeared from my display, hence everything is in black and white.
    When i log in or restart I have full color so it is only a software problem.
    It is not clear at exactly what point you have no colour. You say you have no colour
    then you say you have colour after you login or restart.
    Dave

  • Rich text not displaying in color

    I have a text object that has the Paragraph Text Interpretation set to RTF Text.  However, when I run the report, all of the text displays as black instead of the colors the user defined.  It is supposed to display in red and yellow.  All other richtext formats such as bold, italics, etc. display properly.  I know the value of the richtext property is set properly because it displays inside a Visual Studio richtextbox properly.  I am only having issues with Crystal Reports.  Can someone explain how to get the colors to display for a richtext object?  I am using Crystal Reports for Visual Studio 2010.   Thanks.

    i only mentioned a Text Object as that's where a report developer can quickly test what formatting is available in crystal reports.
    if you create a new Text Object then you can look at what formatting options are available and you will then know what options are available in RTF. it's pretty limited. in a text object you can change fonts, colours, add tabs, etc. but not really that much more.
    since there are lots of tags that won't work try to find an SAP Note that goes over what works and what doesn't. for example, i don't think that the stylesheet tag is support and this could be what's causing the issue. there may be more unsupported tags etc.
    for testing create a new test formula to put on your report and then format as RTF. try this syntax first...this does work in cr.
    "{\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fnil\fcharset0 Calibri;}}"+
    "{\colortbl ;\red255\green0\blue0;}"+
    "\viewkind4\uc1\pard\sa200\sl276\slmult1\cf1\lang9\f0\fs22 This is red.\cf0\par"+

Maybe you are looking for