Chanage background colour of adjacent column in xMII 11.5

Hi All,
Is it possible to change background color of adjacent column based on values.
e. g.
col1     col2     col3     col4     col5     col6
0     A     0     A     0     A
1     B     1     B     1     B
0     C     0     C     0     C
1     D     1     D     1     D
0     E     0     E     0     E
is it possible to set background colour of col2 based on value of col1.
col2 red if col1 value is 0 and col2 green if col1 value is 1
Regards,
Sachin
Edited by: sachinjadhavar on Jul 20, 2011 1:10 PM
Edited by: sachinjadhavar on Jul 20, 2011 1:11 PM

Hi Sachin,
I hope the columns are of iGrid. You can do it by writing iGrid methods.
For all rows, get the cell value using:
document.iGrid.getGridObject().getCellValue(ROWNUMBER,COLNUMBER)
Write the logic of color and apply the color to specific column using
document.iGrid.getGridObject().setCellBackgroundColor(ROWNUMBER,COLNUMBER,COLOR)
Hope this solves your problem.
Best Regards,
Kedar

Similar Messages

I'm using Photoshop Elements 12 on Windows 8.1. When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour. How can I restore the original toolbar?

I'm using Photoshop Elements 12 on Windows 8.1. When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour. How can I restore the original toolbar?

Thanks for your help - your suggestion worked beautifully.Dennis Hood
From: 99jon <[email protected]>
To: Dennis Hood <[email protected]>
Sent: Thursday, 15 January 2015, 15:20
Subject: I'm using Photoshop Elements 12 on Windows 8.1. When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour. How can I restore the original toolbar?
I'm using Photoshop Elements 12 on Windows 8.1. When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour. How can I restore the original toolbar?
created by 99jon in Photoshop Elements - View the full discussionTry re-setting the prefs.Go to: Edit >> Preferences >> General (Photoshop Elements menu on Mac)Click the button Reset Preferences on next Launch If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7099161#7099161 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7099161#7099161 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can I make a label for my chart that changes dynamically when I drag selection of data to adjacent column?

I have a custom budget using Numbers '08 and have labeled a chart in previous versions of my budget but when I tried to update it for the new year I can't figure out how to make the label change dynamically as I drag the selected area to the adjacent column. I have checked Numbers Help and Tutorial videos as wellas the manual and have not found anything that comes close to helping but as I said I had it on previous versions but obviously don't remember how I did it and unfortuanately it is not a very intuitive feature. Thanks in advance for any help on this.

The linkage appears to be automatic, but when broken, does not reattach itself.
Redoing the chart isn'r a long process, though, unless you've made extensive format changes to it. Here's my process, which started with a headerless table wiht the Month labels in Row 1 (and a Chart that had an "Untitled" label on the category axis, and ended with the table and chart shown below:
Click on any cell in the table to activate it.
Go Table > Add Header Row.
Select the cells containing the month names. Copy.
Select the cells in the same columns of the Header row. Paste.
Select the table. If the Header for the current month is highlighted and the month label is on the table, Stop here. If not (and it probably will not be), continue.
Delete the existing Chart (or drag it aside to use as a colour and style reference)
Unhide any hidden rows used in the Chart.
Select the cells to be charted.
Click the Series orientation control (¡¡¡) to change it. The control will turn 90° and move from the column highlight to the row highlight.
Your table and chart should now resemble the one in the image above. Edit the style as needed and you're done.
Regards,
Barry

Background Colour Incorrect when exporting to PDF from Crystal Reports 2008

Hello All
When exporting to PDF from CR2008 the background colour of the crosstab is incorrectly displayed. The problem is as follows to create a crosstab with a grey header row and column details in white we have used the following trick.
Format Cross Tab Border Background is set to Silver.
Crosstab Expert Grand Total Background colour is set to white.
The result is a crosstab with header in grey and details in white.
This report displays correctly in CR2008, and exports as seen on screen to everything but PDF. When exporting to PDF the Crosstab is completely grey taking on only the Background colour of silver, and ignoring the Grand Total Background colour being set to white.
What is strange that when I print to PDF the format is also displayed exactly as required,
Any help on this matter would be greatly appreciated.
Some additional details.
CR2008 version 12.3.1.683
Adobe Reader version 9.3.3
Windows XP Professional
Thanks
Phillip
Edited by: Phillip L on Nov 23, 2010 1:51 PM

If this is a big issue for you then please purchase a case and a Rep can duplicate and escalate to R&D.
As a work around export to Editable RTF and in Word 2007 you can get a PDF export plug-in and then export to PDF.
Thank you
Don

Background Colour in CSS

Hi there,
I'm creating a page in CSS and found that in selecting a
colour for a column, it only applies the colour behind where there
is actual content. After that, it reverts to the default colour of
the whole container. How can I make it so that the colour will
continue on down the page indefinitely? The reason I ask is because
the content in the neighboring box is longer and so it looks ugly
with this sudden cut off box beside it.
Thanks very much!
M

> I'm creating a page in CSS and found that in selecting a
colour for a
> column,
> it only applies the colour behind where there is actual
content. After
> that, it
> reverts to the default colour of the whole container.
How can I make it so
> that
> the colour will continue on down the page indefinitely?
There really isn't a concept of 'columns' in CSS as there is
with tables
(ie, TD).
A CSS column is usually a DIV container. A div will ONLY be
as high as the
content.
This is perhaps one of the main gripes people have creating
columnar layouts
with CSS.
Common workarounds are to apply colors in 'layers' by
wrapping your columns
in container divs, giving them a background color, and then
giving your
longer columns their own background color. The catch is that
you have to
know what the tallest column will be, and that's not always a
given.
Another option is to make a GIF of your column colors and
apply that as a
background to the main wrapper DIV.
Finally, there are some javascript options as well that, upon
page load,
will determine the height of the tallest column and adjust
the others
accordingly.
-Darrel

How to put colours for a column in ALV

Dear All,
I need to put green colour for 1 column in an ALV report.
Can anybody tell me how we can do that ...
Thanking you in advance,
Shankar

Here's a little sample program..... this illistrates coloring at the column, row, and cell level.
report zrich_0002 .
* Use of colours in ALV grid (cell, line and column)            *
* Table
tables : mara.
* Type
types : begin of ty_mara,
          matnr         like mara-matnr,
          matkl         like mara-matkl,
          counter(4)    type n,
          free_text(15) type c,
          color_line(4) type c,           " Line color
          color_cell    type lvc_t_scol, " Cell color
end of ty_mara.
* Structures
data : wa_mara     type ty_mara,
        wa_fieldcat type lvc_s_fcat,
        is_layout   type lvc_s_layo,
        wa_color    type lvc_s_scol.
* Internal table
data : it_mara     type standard table of ty_mara,
       it_fieldcat type standard table of lvc_s_fcat,
       it_color    type table          of lvc_s_scol.
* Variables
data : okcode like sy-ucomm,
       w_alv_grid          type ref to cl_gui_alv_grid,
       w_docking_container type ref to cl_gui_docking_container.
parameters : p_column as checkbox,
             p_line   as checkbox,
             p_cell   as checkbox.
at selection-screen output.
perform get_data.
perform fill_catalog.
if w_docking_container is initial.
    perform create_objects.
endif.
*&      Form create_objects
form create_objects.
create object w_docking_container
    exporting
      ratio                       = 60
    exceptions
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      lifetime_dynpro_dynpro_link = 5
      others                      = 6.
create object w_alv_grid
    exporting
      i_parent          = w_docking_container.
* Field that identify color line in internal table
move 'COLOR_LINE' to is_layout-info_fname.
* Field that identify cell color in inetrnal table
move 'COLOR_CELL' to is_layout-ctab_fname.
call method w_alv_grid->set_table_for_first_display
    exporting
      is_layout                     = is_layout
    changing
      it_outtab                     = it_mara
      it_fieldcatalog               = it_fieldcat
    exceptions
      invalid_parameter_combination = 1
      program_error                 = 2
      too_many_lines                = 3
      others                        = 4.
endform.
*&      Form get_data
form get_data.
select * from mara up to 5 rows.
    clear : wa_mara-color_line, wa_mara-color_cell.
    move-corresponding mara to wa_mara.
    add 1                   to wa_mara-counter.
    move 'Blabla'           to wa_mara-free_text.
    if wa_mara-counter = '0002'
    and p_line = 'X'.
* Color line
      move 'C410' to wa_mara-color_line.
    elseif wa_mara-counter = '0004'
    and p_cell = 'X'.
* Color cell
      move 'FREE_TEXT' to wa_color-fname.
      move '6'         to wa_color-color-col.
      move '1'         to wa_color-color-int.
      move '1'         to wa_color-color-inv.
      append wa_color to it_color.
      wa_mara-color_cell[] = it_color[].
    endif.
    append wa_mara to it_mara.
endselect.
endform.
*&      Form fill_catalog
form fill_catalog.
* Colour code :                                                 *
* Colour is a 4-char field where :                              *
*              - 1st char = C (color property)                  *
*              - 2nd char = color code (from 0 to 7)            *
*                                  0 = background color         *
*                                  1 = blue                     *
*                                  2 = gray                     *
*                                  3 = yellow                   *
*                                  4 = blue/gray                *
*                                  5 = green                    *
*                                  6 = red                      *
*                                  7 = orange                   *
*              - 3rd char = intensified (0=off, 1=on)           *
*              - 4th char = inverse display (0=off, 1=on)       *
* Colour overwriting priority :                                 *
*   1. Line                                                     *
*   2. Cell                                                     *
*   3. Column                                                   *
data : w_position type i value '1'.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'MATNR'    to wa_fieldcat-fieldname.
move 'MARA'     to wa_fieldcat-ref_table.
move 'MATNR'    to wa_fieldcat-ref_field.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'MATKL'    to wa_fieldcat-fieldname.
move 'MARA'     to wa_fieldcat-ref_table.
move 'MATKL'    to wa_fieldcat-ref_field.
* Color column
if p_column = 'X'.
    move 'C610'     to wa_fieldcat-emphasize.
endif.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'COUNTER' to wa_fieldcat-fieldname.
move 'N'        to wa_fieldcat-inttype.
move '4'        to wa_fieldcat-intlen.
move 'Counter' to wa_fieldcat-coltext.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'FREE_TEXT' to wa_fieldcat-fieldname.
move 'C'         to wa_fieldcat-inttype.
move '20'        to wa_fieldcat-intlen.
move 'Text'      to wa_fieldcat-coltext.
append wa_fieldcat to it_fieldcat.
endform.
Regards,
Rich HEilman

How can I change the background colour when working on a doc in full screen view (pages)?

Recently I have been working on docs without the distraction of having to see my desktop around my page file by using the full screen view in pages. I do find the contrast to an all black screen too harsh though and it makes my eyes more tired than seeing the clutter of my desktop around the page. Is there any way I can change the background colour?
Any help much appreciated!

When you are in Full screen mode move the cursor up to the top to show the Format bar. Then look to the far right. There you'll see Background and a rectangle. Click on the rectangle and change the colour.
For information on Pages download the Pages User Guide from your Pages Help menu.

How do I change the background colour on notes. I need a darker background due to a visual issue. Apple has now discriminated those with visual issues. I am so not happy with many of the new changes because of this.

I am so not happy with the new changes especially when it come to the ability to change background colours, fonts and font sizes/ colours... Does Apple really think that their only audience is the young cool crowd or people who do not have a visual impairment. Think before you make changes to your software and programs. You WILL lose more people to androids if you continue this way.
At least give users the ability to make apps like notes their owned by allowing them to pick the style, theme, background and colour, font size and colour.
A very ****** off Apple user who is now looking at Androids.

Hi Tricia,
I'm sorry but I don't see an ideal way to do this. Is it the yellow label text, e.g: "New" against the white background which is causing the difficulty?
The only way I've found of getting the colors to change in Notes is via Settings>General>Accessibility>Invert Colors but then it looks like something has barfed all over your screen.
I'd be very, very surprised if Apple do not fix this, firstly because I believe "Accessibility" is a legal matter and secondly because they will not want to cause difficulty for their customers. We have to remember that this is a major, major overhaul of iOS, it has essentially been taken back to the drawing board and done from scratch again, it may take a little time, but I'm sure they will fix these issues.
Regards,
Steve

How to print Adobe Forms without the black/gray backgrounds in the side columns

How can we print Adobe Forms without the black/gray backgrounds in the side columns? We are wasting a lot of ink printing out these forms and would like to have simply black ilnes to distinguish columns and black lettering, but no background colors. Any help would be appreciated. Thanks.

I am not positive what you are printing from but I am thinking it is from the View Responses tab with a response row selected and then shown in "Detail View" and that the column of field names has a dark grey background...
To change the color of the column headers select the row of headers (do this by clicking on the first dark grey header field and then scroll to the last one and shift+click on the last one), then in the "Text" tools change the text color to Black and the Fill color to white:
(Selected the header cells)
Changed the text/font color to black and the fill color to white
Now you can see the detail view does not have the dark grey.
Thanks,
Josh

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Thanks

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Yellow on white is harder to read. Thanks

Another question. How do you bookmark something. It was so easy before, why did they change it? Can I uninstall it?

Change the colour of some column headers

Hello All,
I have a table with a few columns. I want to colour some of the column headers. I want to do this as these columns represent a KEY.
Regards,
Aayush

Hi Aayush,
As such there doesn't exist any way to colour only some column <b>headers</b>. The two existing options are :
1) Show the data of some columns in a different colour. For this use text views (default one) as the column elements, and select one among the few built-in colours for the property 'semanticColor' of the text view.
2) Attach a small image to the primary column's header, using the 'imageSource' property of the table header.
Hope this helps,
Best Regards,
Nibu.

My iTunes 11.0 (mac) has a black background colour and I can not see all of the information. How do I change the background colour in iTunes 11.0 (mac)

My iTunes 11.0 (mac) has a black background colour and I can not see all of the information for each song. How do I change the background colour in iTunes 11.0 (mac) so I can see check boxes etc. My download window shows no information, it is entirely black.

Trent o
Someone else in the forum told me how to do this. If you have Onyx on your system then select Parameters, iTunes and turn off high contrast mode. If you don't have Onyx, I'd suggest getting it. It is freeware and used to help maintain your system. Good luck
Paul

How can I sum the values in a given column on sheet 1 i.e. A1:A50 based on the adjacent columns specific value i.e. B1:B50 = "Living Room" on sheet 2

How can I sum the values in a given column on sheet 1 i.e. A1:A50 based on the adjacent columns specific value i.e. B1:B50 = “Dinning Room” on sheet 2
For Example:
SHEET 1
A
B
$50
Dinning Room
$800
Dinning Room
$300
Kitchen
$1,000
Master Bedroom
$100
Dinning Room
SHEET 2
Display the total SUM amount of each Project based on Sheet 1
Project Name
Total Cost
Dinning Room
$950
Kitchen
$300

Would be a good idea to open iWork Formulas and Functions User Guide and search for the description of the function named SUMIF
The Guide is available for every user thru the Help menu.
Yvan KOENIG (VALLAURIS, France) jeudi 19 mai 2011 17:32:42
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Changing background colour for a new Workspace page

Hi everybody,
can anybody help me?
I want to create a new Workspace Page. When i create a new page in the workspace, the colour is white. How can i change the background colour?
Thanks for any suggestion!
Eddy

Eddy,
This forum is for workspace manager - a database product that has no UI itself. I'm not sure what product you are using, but it's not WM.
Bryan

Background Colour in Pages 5.0.1

Knowing how Apple likes to have everything sent electronically, and not printed, I am surprised that I can't change the background page colour of documents.
I can change the background of a word, sentence and paragraph. I can even select all the text on a page and change the background colour of that.
But there is still a white border all around this document, where the margins, headers and footers are.
It looks really NAFF.
Anyone got any ideas please.

Make a page size rectangle, color it and send it to the back or make it a master object.
Peter

Chanage background colour of adjacent column in xMII 11.5

Similar Messages

Maybe you are looking for