Chance Adressbook Data store location.... so that it is includes in TM

Dear All,
As TimeMachine does not backup the standard store location of Adressbook:
/Library/AddressBookServer/Data
So I wanted to chance the location to "shared items/AB_BU" where everthing gets backed up.
(ServerAdmin/Adressbook/Settings/General ... choose)
But this doesn't work. And I always get this massage:
The CardDAV server returned an error (500) for the user “example”.
URL: http://192.168.1.133:8800/principals/_uids_/EB6BC6A8-6A67-4D05-986A-825320E3391B/
I observed that the Folder in /Library/ have the permissions (command+i) for
user = _carddav
group = _carddav
and the Folder in /shareditems/AB_BU/ not!!!
What confuses me the most is that I have done the same for iCal and everything is working fine there. the new store location for ical has the correct permissions ?
Do you have any experiences with this?
Thank you
Dietmar

To get better help sooner, post a [url http://mindprod.com/jgloss/sscce.html]SSCCE (Short, Self Contained, Compilable and Executable) example that demonstrates the problem.
db
edit Don't bother. Post the SSCCE on StackOverflow instead.
Edited by: Darryl Burke

Similar Messages

Changing data store location !!

Hi
Do anyone know how to change the data store location C:\Users\[USERNAME]\AppData\Local\Nokia\Nokia Suite to a preferred location as I recently lost lot of my messages and sync done in OVI??

How did you lose it from the location you have mentioned ? Did your system crash or something ? What you can do is keep a copy of this folder on a Pen Drive or on other Drive on your PC if you need...In case of a crash.. copy the data back to the original location...but you will need to take copy after every Sync...
You may find this interesting ...

Which is the most up to date version of FF that does not include the plugin-container ?

Hi Good People at Firefox
Firstly may I say that you have created a great product which kicked MS's ass for a long time however I'm now concerned that the latest updates are pushing my poor old desktop to the limit.
Upgraded to 4 today and the dreaded plugin container loaded yet again. On a PC with 512k memory and FF's notoriously bad memory management (i.e. it doesnt release memory when tabbed windows are closed) the plugin container is the last thing I need.
So can you tell me which is the most up to date version of FF that doesnt include the plugin-container option ? i.e. the last version of Firefox before plugin container.
I think it was version 3.?? but now I cannot revert to the previous installation to find out.
Thanks
Michael Dalton

You can disable the plugin-container in any Firefox version that uses it.
* http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
You can set the pref dom.ipc.plugins.enabled to false on the about:config page to disable the plugin-container process (OOPP)
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Unity Data Store for unity 8

Guys,
Im installing unity 8.0.3 , but unfortunately stuck at " cisco data store" .When i searched google itsays to install "sql server 2005 sp3" or"sql server express 2005 sp3". I installed express , but unity assistant still shows the result as "failed".
Any help from u guys will be appreciatable.

You should take a look at the "Read Me" file as it states that the Unity Data Store DVD for Unity 8 is NOT available for download. Refer to the following:
Do Not Use the Cisco Unity Data Store 2000 Disc from Cisco Unity 7.x and Earlier to Upgrade to Cisco Unity 8.0
If you are upgrading to Cisco Unity 8.0 and reinstalling software on the Cisco Unity server (for example, because you are replacing the server or upgrading to Windows Server 2003), you must use the Data Store 2000 disc that ships with Cisco Unity 8.0. The Data Store 2000 disc that shipped with earlier versions of Cisco Unity has a different directory structure, and the Cisco Unity System Setup Assistant, which guides you through installing and configuring Cisco Unity 8.0, will not recognize the Data Store 2000 disc that shipped with Cisco Unity 7.x and earlier. (If you paid for an upgrade to SQL Server 2005, we will ship you a Data Store 2005 disc with the rest of your Cisco Unity software.)
The Cisco Unity 8.0 version of the Data Store 2000 disc is not available for download on Cisco.com. To perform an upgrade that requires reinstalling software on the Cisco Unity server, you must either wait for the Cisco Unity 8.0 installation discs to arrive or manually install SQL Server 2000 or MSDE 2000. Manually installing the application is not documented and, therefore, not supported.
There's your answer. You need to order the upgrade kit from Cisco in order to get the proper DVD.
Hailey
Please rate helpful posts!

Assignment of movement type & store location

Hi friends
Can anybody suggest me how to assign movement type & store location so that while selecting movement type system should automatically pick up s.l.
Thanks
Umesh

First of all there no std setting for this kind of requirements and second thing you can use the user exit based on the stock type selection it should post in to particular storage location
to do that use user exit MBCF0009 (take help of ABAPer to implement this)
but you can not make based on the movement type and the reason is suppose you are doing GR against the PO with Mtype 101
you can do this for QI stock
Blocked stock
etc
so you can not make based on Mtype becusase same Mtype will be used of all kind of stock receipt for PO.
so use above user exit based on the stock type logic ystem should put the storage location.

Stock transfer between stor locations - copy in reference data

Dear all,
We would like to implement a process in SAP MM that is as follows.
However so far we have not been able to find a suitable/good solution for the below step number 5 below
Proces in general: A number of Materials are to be received in storage location 1 but to be stocked in storage location 2 of the same plant.
We configured it like this so far:
1                    MM01 - Material master created in both storage locations. In the field MARC-LGFSB ( external procurement stor.location) we have filled in storage location 1
2                    MD01 - mrp runs are executed ; results in Purchasing Requisitions created for storage location 1
3                    Purchase requisitions are converted to Purchase orders
4                    MIGO u2013 goods receipt for the purchasing order , hence receipt into stock of storage location 1
5                    MIGO_TR u2013 stock transfer posting stor.loc 1 to stor.loc. 2 . At this point we would like to be able to reference/copy the data of the step 1 into this transaction in order that the data does not have to be re-entered manually. We canu2019t find a way how to do this. Should we use other functionality to enable this? In the end what we are after is to avoid typing in data twice.
Your help would be much appreciated.
Cheers,
Arjan
Edited by: A. de Vries on Oct 27, 2010 5:41 PM

Why don't you receive the goods directly in the storage location where it is "stocked"?
If you still adhere to your idea you maybe could trigger an output (via message determination) when posting the GR in MIGO. The output would create an IDOC which posts the goods movement (check IDOC "MBGMCR02"??? --> this IDOC uses function modul "MB_CREATE_GOODS_MOVEMENT" )
This needs some development...

IPod Touch 5th Generation Australia Release Date? Last week I went to the Carindale Apple store located in Queensland and they had said they wont be getting it for a few months but they'll get it before next year. Anyone know the exact date ?

So the question says it all. Last week, I went to the Carindale Apple Store located in Queensland to purchase a iPad 2 and a iPod Touch 5th Generation. I asked one of the shop assistants when they were getting the iPod Touch 5th Generations and they had said that they didnt know that they would recieve it in a few months but they'll recieve it before next year. Anyone know the OFFICIAL RELEASE DATE of it in Australia ? I want to order it online but my mum doesnt have a credit card, lol .

No, Apple has not set a date.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

I am trying to change my Itunes store location but a message that I need to cancel a suscription in Itunes Match. How can I do to cancel this suscription? Thanks

I am trying to change my Itunes store location from Spain to USA but a message that I need to cancel a suscription in Itunes Match. How can I do to cancel this suscription? Thanks

To change a secondary account you have to delete/sign out of both accounts. After doing so, you can sign back in with the secondary account ID in System Preferences>iCloud and it will become the primary account. To delete an account from System Preferences>Internet Accounts, select it on the left sidebar, then click the "-" icon at the bottom to delete it.

How can I make extra storage on my phone when I have deleted any all data, pictures and files that I couldn't store in a dropbox and not have purchase additional storage?

how can I make extra storage on my phone when I have deleted any all data, pictures and files that I couldn't store in a dropbox and not have purchase additional storage?

Purchasing additional storage only applies to iCloud, not to the phone itself. You cannot purchase additional storage for the phone, only purchase a larger capacity phone. If you have deleted all of the content that you can, then that is all of the space that you have. What is it exactly that you are trying to do? Does this have to do with space for performing an OTA update of the iOS?

Report for showing pending (ageing) quantity according to store location w

dear ABAP Gurus,
I have made a roport for showing pending (ageiing) quantity acc to location wise.
and i m sending here the code i made for same.Tell me if sme amendments required.
Report for showing pending (ageing) quantity according to store location wise:
1.     Fields on selection screen (input screen) : Plant code From to , Material code From to , Current date, Numbers of days(for display the ageing(pending) balance for a given period,Storage locations from to.
2.     Field in the output List : Material code , Material descriptions, Balance quantiy,Balance value ,Consumptions date.
the code is:
REPORT ZAGEIN_SUDHA.
TABLES: mara,mseg,makt.
TYPES: BEGIN OF t_mara,
matnr LIKE mara-matnr,           "material number
maktx LIKE makt-maktx,           "material description
ersda LIKE mara-ersda,           "material creation date
lgort like mseg-lgort,           "storage location
bwart like mseg-bwart,           "goods received or issued
menge like mseg-menge,           "value at movement type
werks like mseg-werks,           "plant
END OF t_mara.
DATA: i_mara TYPE STANDARD TABLE OF t_mara with header line,
      itab type standard table of mara with header line,
*wa_mara TYPE t_mara,
v_date TYPE i,                      "age in days
GI type mseg-menge,                 "goods issued
GR type mseg-menge,                 "goods received
bal type mseg-menge,                "balance
total type i,
grace type i,
g_quan type mseg-menge.
SELECTION-SCREEN BEGIN OF BLOCK b1.
SELECT-OPTIONS: p_matnr FOR mara-matnr.
select-options: p_werks for mseg-werks.
select-options: p_lgort for mseg-lgort.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
REFRESH i_mara.
SELECT mr~matnr                        "mara-matnr
mk~maktx                               "makt-maktx
mr~ersda                               "mara-ersda
mg~lgort                               "mseg-lgort
mg~bwart                               "mseg-bwart
mg~menge                               "mseg-menge
INTO corresponding fields of table i_mara
FROM mara AS mr INNER JOIN
makt AS mk
ON mrmatnr = mkmatnr INNER JOIN mseg AS mg on mkmatnr = mgmatnr
WHERE mrmatnr IN p_matnr and mgwerks IN p_werks and mg~lgort IN
p_lgort.
total = 0.
IF sy-subrc = 0.
*CLEAR wa_mara.
LOOP AT i_mara.
if i_mara-bwart = '101' .
GR = total + i_mara-menge.
total = GR.
elseif
i_mara-bwart = '102' or i_mara-bwart = '122'.
GR = GR - i_mara-menge.
endif.
if i_mara-bwart = '261'.
GI = total + i_mara-menge.
elseif i_mara-bwart = '262'.
GR = GR + i_mara-menge.
endif.
bal = GR - GI.
if bal GE GR.
grace = 30.
else.
grace = 10.
endif.
g_quan = bal - GR.
v_date = sy-datum - i_mara-ersda.
endloop.
WRITE: / i_mara-matnr ,i_mara-maktx,' is ',v_date,' ,days old and
stored at' ,i_mara-lgort ,   ' with balance =', bal ,'the grace time is
', grace, 'and' ,'grace quantity is ' ,g_quan.
*ENDLOOP.

Hi,
That sounds like a nice report. What about it?!
Gareth.

Report for showing pending (ageing) quantity according to store location wi

Report for showing pending (ageing) quantity according to store location wise:
Fields on selection screen (input screen) : Plant code From to , Material code From to , Current date, Numbers of days(for display the ageing(pending) balance for a given period,Storage locations from to.
Field in the output List : Material code , Material descriptions, Balance quantiy,Balance value ,Consumptions date.

Hi,
That sounds like a nice report. What about it?!
Gareth.

0IC_C03 - some key figures have unassigned Store location

Hi,
I try to implement Inventory managment scenario in BW.I follow the How to document How to handle inventory management scenarios in Bw.
Now I uploaded data to BW, the sume of key figures as general look good but I have problem with key figures,which work with value in currency, this key figures(e.g 0ISSVS_VAL, 0VALSTCKVAL) are not assigned to Store location 0STOR_LOC, values of these key figures have this characteristics Unassigned (#), unlike key figures with amount value e.g. kg etc are assigned to store location. So there is problem that is no possibility to compare material stock in currency and amount.
Do you have any experience how to solve this issue?
I work with BI 7.0 version and use standard object from BI content without modification.
Thanks
Petr
Edited by: Petr Jedlicka on Aug 12, 2011 2:30 PM
Edited by: Petr Jedlicka on Aug 12, 2011 2:31 PM

Hi,
Inventory values are captured at site/plant levels not the storage locations. These values are caputured using 2lis_03_um datasource. When you create a material, materials are created as per site. 0MAT_PLANT.
when there are movements of sales in the inventory, sales take place thru site not storage location. So sloc will not get updated in the transaction. where as when you move stock from one site to other site, there may be on storage location for all site or one sloc for one site. So for qtys you will have sloc.
Thanks
srikanth

Prod. stor. location usage Material master

Dear PP expert
Who can help to explain what meaning for this feild Prod. stor. location in MM01 transcation? what is its usage?>
Thanks

Hi Benny,
The Prod. sloc maintained in mtl master serves dual purpose, first when a production order is created for that material, it acts as the receiving location i.e. when you post a GR for the prodn order via MB31 the stock gets posted into this sloc. The other purpose is when this material is a component in a production order, then stock gets issued from this sloc.
This field can be maintained at material master level or at BOM level. The one maintained at BOM level has a higher precedence over the one in material master. If you might ask why 2 places to maintain the same data, there might be instances where the component is stored at different slocs depending on the BOM, then it makes sense to maintain at BOM level, but if the component is always maintained at a single sloc, then maintain in mtl master level.
Hope the above answers your query.
Regards,
Vivek

Show store locations on a Google map

What is the latest way to show store locations on a Google map in BC please? There are lots of resources but they seem to differ for the best approach to embed a Google map & many are out of date.

There is no latest way but the safest way is to use the google geolocation based on address rather then trying to use the lattitude and longitutde from BC. SInce these do not render out anything in several cases. Like if you are in a country that does not have a state for example.
You want to look at the latest google API and html5 implementation.
https://developers.google.com/maps/documentation/javascript/?csw=1
http://stackoverflow.com/questions/8970017/html5-multiple-point-locations

RBS Migration and Data Store Expension

I'm seeking some insight on if (and how) remote blobs are migrated. For example, if I've configured RBS for SharePoint 2010 but I'm approaching the storage maximum on the hardware of my remote blob location - how would I go about moving the blobs elsewhere and 'pointing' Sql Server and SharePoint to the new locations? In addition, if I were to simply add another storage location - how does one go about re-configuring the RBS to store blobs in a new/additional location?
TIA.
-Tracy

1.
Live SharePoint 2010 environment with SQL 2008 R2
a.
Take back up from 2010 live server.
i.
Open management studio on SQL server.
ii.
Take back up of content database of live application.
2.
QA SharePoint 2010 environment with SQL 2008 R2
a.
Restore SQL backup
i.
Open management studio on SQL server.
ii.
Restore database.
b.
Create Web Application
i.
Open SharePoint server
ii.
Open central admin
iii.
Create web application with classic authentication.
c.
Dismount database which is with existing application
i.
Open SharePoint PowerShell on SharePoint server.
ii.
Fire below command.
Dismount-SPContentDatabase <Database name>
Note: Change the database name.
d.
Mount restored database with existing application
i.
Open SharePoint PowerShell on SharePoint server.
ii.
Fire below command.
Mount-SPContentDatabase <Database name> -DatabaseServer <Database server name > -WebApplication <Web application>
Note: Change the database name and web application URL.
iii.
Open SharePoint Designer and change the master page and publish it.
iv.
Set the Test page as Home page.
v.
Test user logging
Logging with the 2-3 different users and test they can able to logging.
e.
Configure RBS
i.
Enable FILESTREAM on the database server
Open SQL Server Configuration manager on SQL Server.
From left panel click on SQL Server Services.
From right panel select the instance of SQL Server on which you want to enable FILESTREAM.
Right-click the instance and then click Properties.
In the SQL Server Properties dialog box, click the FILESTREAM tab.
Select the Enable FILESTREAM for Transact-SQL access check box.
If you want to read and write FILESTREAM data from Windows, click Enable FILESTREAM for file I/O streaming access. Enter the name of the Windows share in the Windows Share Name box.
If remote clients must access the FILESTREAM data that is stored on this share, select allow remote clients to have streaming access to FILESTREAM data.
Click Apply and ok.
ii.
Set FILESTREAM access level
Open SQL management studio and connect SQL database instance.
Right click on database instance and open Property.
Go to: click on advanced from left panel.
Find the “Filestream Access Level” property and set the value “Full access enabled”
Click OK and exit window.
iii.
Set SharePoint Configure FILESTREAM access level
Open Query window on root
Execute following query
EXEC sp_configure filestream_access_level, 2
RECONFIGURE
Restart SQL services
Note: You will get message” Configuration option 'filestream access level' changed from 2 to 2. Run the RECONFIGURE statement to install.”
iv.
Provision a BLOB store for each content database
Click the content database for which you want to create a BLOB store, and then click New Query
Execute following query
use [<Database name>]
if not exists
(select * from sys.symmetric_keys
where name = N'##MS_DatabaseMasterKey##')
create master key encryption by password = N'Admin Key Password !2#4'
Note:
Change the database name
You get “Command(s) completed successfully.” Message.
use [<Database name>]
if not exists
(select groupname from sysfilegroups
where groupname=N'RBSFilestreamProvider')
alter database [<Database name>]
add filegroup RBSFilestreamProvider contains filestream
Note:
Change the database name.
You get “Command(s) completed successfully.” Message.
use [<Database name>]
alter database [<Database name>]
add file (name = RBSFilestreamFile, filename =
'<E:\SQL\Data\PetroChina>')
to filegroup RBSFilestreamProvider
Note:
Change the database name and store path.
If you get message “FILESTREAM file 'RBSFilestreamFile' cannot be added because its destination filegroup cannot have more than one file.”
Ignore it.
v.
Install the RBS client library on each Web server
To install the RBS client library on the on the first Web server
Open SharePoint Web server
Open command prompt.
Execute following command
msiexec /qn /lvx* rbs_install_log.txt /i RBS.msi TRUSTSERVERCERTIFICATE=true FILEGROUP=PRIMARY DBNAME=<Database name> DBINSTANCE=<Database server> FILESTREAMFILEGROUP=RBSFilestreamProvider FILESTREAMSTORENAME=FilestreamProvider_1
Note:
Change the database name and database instance name.
DB instance should be <server name\instance name>
Download RBS.msi for respective SQL version.
To install the RBS client library on all additional Web and application serversOpen SharePoint Web server
Open command prompt.
Execute following command
msiexec /qn /lvx* rbs_install_log.txt /i RBS.msi DBNAME=<Database name> DBINSTANCE=<Database server> ADDLOCAL=Client,Docs,Maintainer,ServerScript,FilestreamClient,FilestreamServer
Note:
Change the database name and database instance name.
DB instance should be <server name\instance name>
vi.
Enable RBS for each content database
You must enable RBS on one Web server in the SharePoint farm. It is not important which Web server that you select for this activity. You must perform this procedure once for each content database.
Open SharePoint web server
Open SharePoint PowerShell
Execute below script
$cdb = Get-SPContentDatabase <Database name>
$rbss = $cdb.RemoteBlobStorageSettings
$rbss.Installed()
$rbss.Enable()
$rbss.SetActiveProviderName($rbss.GetProviderNames()[0])
$rbss
Note: Change the database name.
vii.
Test the RBS installation
On the computer that contains the RBS data store.
Browse to the RBS data store directory.
Confirm that size of RBS data store directory.
On the SharePoint farm, upload a file that is at least 100 kilobytes (KB) to a document library.
On the computer that contains the RBS data store.
Browse to the RBS data store directory.
Confirm that size of RBS data store directory.
It must be more than before.
viii.
Test user logging
Logging with the 2-3 different users and test they can able to logging.
f.
Migrate RBLOB from RBS to SQL database and completely remove RBS
i.
Migrate all content from RBS to SQL and disable RBS for content DB:
Open SharePoint server.
Open SharePoint management PowerShell
Execute below script
$cdb=Get-SPContentDatabase <Database name>
$rbs=$cdb.RemoteBlobStorageSettings
$rbs.GetProviderNames()
$rbs.SetActiveProviderName("")
$rbs.Migrate()
$rbs.Disable()
Note:
Migrate() might take some time depending on amount of data in your RBS store.
Change the database name.
If you get message on the PowerShell “PS C:\Users\sp2010_admin> $rbs.Migrate()
Could not read configuration for log provider <ConsoleLog>. Default value used.
Could not read configuration for log provider <FileLog>. Default value used.
Could not read configuration for log provider <CircularLog>. Default value used.
Could not read configuration for log provider <EventViewerLog>. Default value used.
Could not read configuration for log provider <DatabaseTableLog>. Default value used.” Then wait for while it will take some time to start migration.”
ii.
Change the default RBS garbage collection window to 0 on your content DB:
Open SQL server
Open SQL management studio
Select your content DB and open new query window
Execute below SQL query
exec mssqlrbs.rbs_sp_set_config_value ‘garbage_collection_time_window’,'time 00:00:00′
exec mssqlrbs.rbs_sp_set_config_value ‘delete_scan_period’,'time 00:00:00′
Note:
Run one by one SQL query
You will get “Command(s) completed successfully.” Message
iii.
Run RBS Maintainer (and disable the task if you scheduled it):
Open SharePoint server
Open command prompt
Run below command
"C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer\Microsoft.Data.SqlRemoteBlobs.Maintainer.exe" -connectionstringname RBSMaintainerConnection -operation GarbageCollection ConsistencyCheck ConsistencyCheckForStores -GarbageCollectionPhases
rdo -ConsistencyCheckMode r -TimeLimit 120
iv.
Uninstall RBS:
Open SQL server
Open SQL management studio
On your content DB run below SQL query
exec mssqlrbs.rbs_sp_uninstall_rbs 0
Note:
If you will get message “The RBS server side data cannot be removed because there are existing BLOBs registered. You can only remove this data by using the force_uninstall parameter of the mssqlrbs.rbs_sp_uninstall stored pro” then run this “exec mssqlrbs.rbs_sp_uninstall_rbs
1 ”
You will get “Command(s) completed successfully.” Message.
v.
Uninstall from add/remove SQL Remote Blob Storage.
I found that there were still FILESTREAM references in my DB, so remove that reference
Open SQL server
Open SQL management studio
Run below SQL query on your content DB:
ALTER TABLE [mssqlrbs_filestream_data_1].[rbs_filestream_configuration] DROP column [filestream_value]
ALTER TABLE [mssqlrbs_filestream_data_1].[rbs_filestream_configuration] SET (FILESTREAM_ON = "NULL")
Note:
Run one by one SQL query
vi.
Now you can remove the file and filegroup for filestream:
Open SQL server
Open SQL management studio
Open new query window on top
Execute below SQL query
ALTER DATABASE <Database name> Remove file RBSFilestreamFile;
Note:
Change the database name
If it gives message “The file 'RBSFilestreamFile' cannot be removed because it is not empty.” Then remove all table prefix with “mssqlrbs_” from your database and execute SQL query again.
This query takes time as per your database size (almost 30 min).
You will get “The file 'RBSFilestreamFile' has been removed.” Message
Execute below SQL query
ALTER DATABASE <Database name> REMOVE FILEGROUP RBSFilestreamProvider;
Note:
Change the database name
You get “The filegroup 'RBSFilestreamProvider' has been removed.” Message.
Or If you get “Msg 5524, Level 16, State 1, Line 1 Default FILESTREAM data filegroup cannot be removed unless it's the last
FILESTREAM data filegroup left.” message. Then ignore this message.
vii.
Remove Blob Store installation
Open SharePoint server
Run RBS.msi setup file and choose Remove option.
Finish wizard.
viii.
Disable FILESTREAM in SQL Configuration Manager
Disable FILESTREAM in SQL Configuration Manager for your instance (if you do not use it anywhere aside this single content DB with SharePoint), run SQL reset and IIS reset and test.
ix.
Test the RBS Removed or not?
On the computer that contains the SQL database.
Confirm that size of SQL database (.mdf file).
On the SharePoint farm, upload a file that is at least 100 kilobytes (KB) to a document library.
On the computer that contains the SQL database.
Confirm that size of SQL database.
It must be more than before. If there is no difference then ignore it. Just check it Store is no more in SQL.
x.
Test user logging
Logging with the 2-3 different users and test they can able to logging.
g.
Convert classic-mode web applications to claims-based authentication
i.
Open SharePoint server
ii.
Open SharePoint PowerShell
iii.
Execute below script
$WebAppName = "<URL>"
$wa = get-SPWebApplication $WebAppName
$wa.UseClaimsAuthentication = $true
$wa.Update()
$account = "<Domain name\User name>"
$account = (New-SPClaimsPrincipal -identity $account -identitytype 1).ToEncodedString()
$wa = get-SPWebApplication $WebAppName
$zp = $wa.ZonePolicies("Default")
$p = $zp.Add($account,"PSPolicy")
$fc=$wa.PolicyRoles.GetSpecialRole("FullControl")
$p.PolicyRoleBindings.Add($fc)
$wa.Update()
$wa.MigrateUsers($true)
$wa.ProvisionGlobally()
iv.
Test user logging
Logging with the 2-3 different users and test they can able to logging.
h.
Take SQL backup from QA server
i.
Open SQL server
ii.
Open management studio on SQL server
iii.
Select the content database
iv.
Take back up of content database
Information: This SQL backup is not content RBS.
3.
New SharePoint 2013 environment with SQL 2012
a.
Restore SQL backup
i.
Open SQL server
ii.
Open SQL management studio
iii.
Restore the SQL database using *.bak file
b.
Dismount database which is with existing application
i.
Open SharePoint server
ii.
Open SharePoint management PowerShell
iii.
Execute below script
Dismount-SPContentDatabase <Database name>
Note: change the database name which bind with existing application.
c.
Mount restored database with existing application
i.
Open SharePoint server
ii.
Open SharePoint management PowerShell
iii.
Execute below script
Mount-SPContentDatabase <Database name> -DatabaseServer <Database server name> -WebApplication <URL>
Note:
Change the database name with new restored database name
Change the database server name in form of “DB server name\DB instance name”
Change the URL of web application
This command take some time.
d.
Upgrade site collection
i.
Open SharePoint server
ii.
Open new site
iii.
You will find message on top “Experience all that SharePoint 15 has to offer. Start now or Remind me later”
iv.
Click on “Start”
v.
Click on ”Upgrade this Site Collection”
vi.
Click on “I Am ready”
vii.
After some time you will get message “Upgrade Completed Successfully”
viii.
Test User logging.

Chance Adressbook Data store location.... so that it is includes in TM

Similar Messages

Maybe you are looking for