Chane archive mode to non archive mode

hi
how can i change a an archived database to n on_archive database

Issue the following commands to put a database into ARCHVELOG mode:
1) Take Back up of Present SPfile by creating pfile " pfile path " from present spfile.
2) Shutdown the database by SUTDOWN IMMEDIATE.
3) Take Cold backup of the database in repsective place .
4) Change the parameter in the pfile.
log_archive_start = FALSE
log_archive_dest_1 = 'LOCATION=F:\Backup\Archive'
log_archive_dest_state_1 = DISABLE
log_archive_format = %d_%t_%s.arc
5) And make a spfile from the modified pfile in default location .
6) Start the database with spfile.
SQL> CONNECT sys AS SYSDBA
SQL> STARTUP MOUNT ;
SQL> ALTER DATABASE NOARCHIVELOG;
SQL> ARCHIVE LOG STOP;
SQL> ALTER DATABASE OPEN;
NOTE 1: Remember to take a baseline database backup right after enabling archivelog mode. Without it one would not be able to recover.
Also, implement an archivelog backup to prevent the archive log directory from filling-up.

Similar Messages

  • For streams , database in Archive log mode or non archive log mode?

    Hello ,
    I have a basic question,
    To set up oracle streams, what should be the the database mode (archive log or non archive log mode)?
    Thanks in advance,
    Raj

    It needs to be in archive log mode..thts the place frm where it captures the necessary information....
    Kapil

  • How to check whether user login in SNC mode or Non - SNC Mode

    Hi
    When SNC is enabled system will accept secure network connections. But,It is up to the user to login in SNC mode or NOT.
    Can any one let me know How to check whether user login in a SNC mode / Non-SNC mode?. Is it only through SU01?.
    Is there any other possibility?. where to check if user login through RFC connections?.
    Please correct me if i am wrong.
    Regards
    Srinivas P.

    Hi,
    Where to check if user login through RFC connections?
    Check T-Code SM04 on every instance. In the column Type you can see what kind of login has been used (GUI, RFC, Plugin, System).
    But,It is up to the user to login in SNC mode or NOT.
    Depends. Check these [parameters|http://help.sap.com/saphelp_nw04/helpdata/EN/19/164442c1a1c353e10000000a1550b0/content.htm]:
    snc/accept_insecure_cpic     
    snc/accept_insecure_gui      
    snc/accept_insecure_r3int_rfc
    snc/accept_insecure_rfc      
    Regards,
    Sven

  • Difference in stress mode versus non stress mode

    When I make use of stress mode (select the check mark) with loadgen 2013 I do not get exceptions reported. However when I use non stress mode there are too many exceptions which are:
    Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to make connection to the server.
    (hr=0x80004005, ec=2423)
     I am running loadgen on the exchange server itself and not a different client. 

    Hi,
    Stress mode just executes tasks as quickly as possible based on how quickly tasks are completing. It will ignore the day length and runs the tasks as quickly as possible.
    The error when you select non stress mode, it may be caused by RPC issue. More details about it, for your reference:
    https://social.technet.microsoft.com/Forums/zh-CN/b3c0eb67-cba6-4570-a563-ece482c3d06a/loadgen-2013-getting-mapiexceptionnetworkerror-unable-to-make-connection-to-server
    Best Regards,
    Allen Wang

  • Module-pool edit mode to non edit mode

    Dear friends ,
    I am working with module-pool, In that  when i enters value that field should become Visible mode   and should  not allow user to edit amount  Please guide me .
    thanks & regards

    Hi try this way...
    PROCESS BEFORE OUTPUT.
      MODULE status_<screen>.
    * Table control for OUTPUT
      LOOP WITH CONTROL <TableControl>.
        MODULE Modify_screen.
      ENDLOOP.
    MODULE Modify_screen OUTPUT.
    * Table control reading values from input screen & displaying on screen
      READ TABLE <Internal table>    INDEX <Table control >-current_line.
    * Logic for screen Display Mode when User enters data
      IF <ITAB>-FIELD is not Initial.       "This means User has enterd Data for the Particular Row
        LOOP AT SCREEN.
          IF screen-name = 'ITAB-FIELD'.       "Passs the table/WorkArea with Field name to make field Display mode
            screen-input = 0.
          ENDIF.
          MODIFY SCREEN.
        ENDLOOP.
      ENDIF.
    ENDMODULE.
    Prabhudas

  • How to use non-Unicode mode in VB6 with ADO.

    I'm using ADO on top of OraOLEDB to connect to Oracle 9.2. The database characterset is AL32UTF8. Since my client can't handle Unicode characters, I need a character conversion. However, arcording to the OraOLEDB document( which can be obtained here http://download-west.oracle.com/docs/cd/B10501_01/win.920/a95498/using.htm#1010255):
    "How Oracle Unicode Support Works
    OraOLEDB works in two modes, Unicode mode and non-Unicode mode. When the client character set is not a superset of
    the server character set, OraOLEDB automatically enables the Unicode mode. In this mode, OraOLEDB stores the data in its cache in the UCS2 encoding scheme. The user should ensure that the database's character set is UTF8 in order to prevent any data loss.
    If the client character set is a superset of the server's, the provider operates in the non-Unicode mode. This mode provides slightly better performance as it does not have to deal with larger character buffers required by the UCS2 encoding."
    My client can only use NLS_LANG VN8VN3, which is NOT a superset of AL32UTF8, so "OraOLEDB automatically enables the Unicode mode". So if I code like this:
    Text1.Font="Some Vietnamese Font"
    Text1.Text= rs1.Fields("Name").Value
    the display is bad ('?' all over the place). This is because rs1.Fields("Name").Type is adVarWChar, so rs1.Fields("Name").Value is encoded in UCS2. What I need is to make rs1.Fields("Name").Type is adVarChar, but it seems to be impossible since Field.Type is readonly.
    When I use MS provider for Oracle, I found out that rs1.Fields("Name").Type is adVarChar, so Oracle do the conversion from/to AL32UTF8 (database character set) and VN8VN3(NLS_LANG) for me.
    Since I use LOB and things that MS does not support, I want to use OraOLEDB, so anyone can help me out? It's ugent.
    I can see that some 3rd program like SQLNavigator4.3 work well with NLS_LANG = VN3VN8 and DATABASE_CHARACTERSET=AL32UTF8 (i.e the program convert between the 2 characterset).
    Please correct me if I misunderstood anything.
    I need this ugently. Any help would be appreciated. If I don't make myself clear enough, please let me know.
    Thanks in advance.

    Thank you for your reply. I started to think that everybody is out on holidays...
    The Oracle9i Client version is 9.2.0.1.0
    Oracle Provider for OLEDB version is 9.2.0.4.0
    Oracle Net version is 9.2.0.1.0, in case you need it.
    The Oracle9i Database version is 9.2.0.1.0
    But I don't think it is a version problem, is it?

  • Db restore non archive mode lost redo log file..restore from controlfile tr

    i have a db 11g I had taken non archive backup but failed to take redo log files backup...
    so while i restored the db ... after formatting the machine ..the oracle instance wont start.
    I create a controlfile trace but when i run it i get errors.
    since i dont have the older log files.. how do i get around with this issue
    Thanks
    Following is the sample of control file trace ..Note i cannot create the redo log file
    since db wont be mounted at most it shall be in nonmount mode
    and below is my created controlfile ....
    CREATE CONTROLFILE REUSE DATABASE "XE" NORESETLOGS NOARCHIVELOG
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    MAXINSTANCES 8
    MAXLOGHISTORY 292
    LOGFILE
    GROUP 1
    'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_80L7C259_.LOG'
    SIZE 50M BLOCKSIZE 512,
    GROUP 2
    'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_80L7C375_.LOG'
    SIZE 50M BLOCKSIZE 512
    -- STANDBY LOGFILE
    DATAFILE
    'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSTEM.DBF',
    'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\UNDOTBS1.DBF',
    'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSAUX.DBF',
    'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\USERS.DBF'
    CHARACTER SET AL32UTF8
    I dont have these 2 files ..what do i do to get around this situation
    'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_80L7C259_.LOG'
    SIZE 50M BLOCKSIZE 512,
    GROUP 2
    'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_80L7C375_.LOG'
    SIZE 50M BLOCKSIZE 512
    -- STANDBY LOGFILE
    DATAFILE
    Edited by: zycoz100 on Feb 27, 2013 10:57 PM

    If you have a cold backup (database shutdown properly) without the redo logs, change this :
    CREATE CONTROLFILE REUSE DATABASE "XE" NORESETLOGS NOARCHIVELOGto
    CREATE CONTROLFILE REUSE DATABASE "XE" RESETLOGS NOARCHIVELOGYou have to change the NORESETLOGS to RESETLOGS for Oracle to recreate the online redo logs.
    Hemant K Chitale

  • RMAN in non-archive mode

    All,
    My database is running in NOArchive log mode. Few major tablespaces are created with NOLOGGING option. We run ETL process.
    My question is can I use RMAN though my tablespaces are created with NOLOGGING and DB is running in non-archive mode?
    if Yes how?
    Thanks

    user2486753 wrote:
    But as per the document it says I can do the incremental backup also but i have shutdown the DB to do that, is that correct?correct., however, you really need to understand what that means (incremental) and how you would do recovery...
    Again, read the docs and TEST, TEST, TEST, TEST, TEST, TEST, TEST, TEST, TEST, TEST, TEST!!!!

  • How to recover from corrupt redo log file in non-archived 10g db

    Hello Friends,
    I don't know much about recovering databases. I have a 10.2.0.2 database with corrupt redo file and I am getting following error on startup. (db is non archived and no backup) Thanks very much for any help.
    Database mounted.
    ORA-00368: checksum error in redo log block
    ORA-00353: log corruption near block 6464 change 9979452011066 time 06/27/2009
    15:46:47
    ORA-00312: online log 1 thread 1: '/dbfiles/data_files/log3.dbf'
    ====
    SQL> select Group#,members,status from v$log;
    GROUP# MEMBERS STATUS
    1 1 CURRENT
    3 1 UNUSED
    2 1 INACTIVE
    ==
    I have tried this so far but no luck
    I have tried following commands but no help.
    SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
    Database altered.
    SQL> alter database open resetlogs;
    alter database open resetlogs
    ERROR at line 1:
    ORA-01139: RESETLOGS option only valid after an incomplete database recovery
    SQL> alter database open;
    alter database open
    ERROR at line 1:
    ORA-00368: checksum error in redo log block
    ORA-00353: log corruption near block 6464 change 9979452011066 time 06/27/2009
    15:46:47
    ORA-00312: online log 1 thread 1: '/dbfiles/data_files/log3.dbf'

    user652965 wrote:
    Thanks very much for your help guys. I appreciate it. unfortunately none of these commands worked for me. I kept getting error on clearing logs that redo log is needed to perform recovery so it can't be cleared. So I ended up restoring from earlier snapshot of my db volume. Database is now open.
    Thanks again for your input.And now, as a follow-up, at a minimum you should make sure that all redo log groups have at least 3 members. Then, if you lose a single redo log file, all you have to do is shutdown the db and copy one of the good members (of the same group as the lost member) over the lost member.
    And as an additional follow-up, if you value your data you will run in archivelog mode and take regular backups of the database and archivelogs. If you fail to do this you are saying that your data is not worth saving.

  • FBL5N - Feild selection non editable mode

    Hi All,
    When i execute FBL5N transaction,i am not able to select the feilds as per my desire bcoz the feild display ICON is in non editable mode.
    The only option i have is layout selection and not the feilds selection.
    Can you let me know how to change it to editable mode.
    regards

    Hello,
    You don't have authorization for maintain ALV layouts. Please contact to your Basis department for authorization.
    ALV layout authorization object is S_ALV_LAYO. Please tell your Basis departman to give this object value for '23'.
    Regards,
    Burak

  • Excise invoice utilization pencil icon is showing non display mode

    Hi Expert
    when i create export invoice and when i create excise invoice with an go for utilization that pencil icon is showing in non display mode because if i want to change this bond,no bond, deemed export,Lou then it is not happening. I maintain configuration for that in default excise group and series group i maintained Export Under bond to specific sales area and excise group,series group and shipping point also.
    but i cannot change to bond.no bond.Lou.and deemed export as per the requirement. if any solution please answer me asap

    We cannot change this field from display to change. Once the excise invoice is captured the excise invoice number is freezed.
    It is SAP Standard & to break this you would need the access key from SAP.
    If the change in excise invoice number is by user mistake, please cancel the excise invocie and capture the new one.
    Thanks & regards
    Hameed Parvez

  • Exchange 2010 all mail clients with internal cached and internal non-cached mode users having connection status issues, login prompt -- external is fine either way

    Hello,
    I'm seeing an issue that started this past Monday with no recent change to our environment. 
    External Outlook Anywhere users and Mobile users, OWA users are unaffected.
    Internal Users are affected when using Outlook of any version, 2010 or 2013.
    -Internal Users normally log into their workstation with their ad credentials, domain joined machines. Outlook opens without credentials prompting ideally.
    1 . Using Cached Mode:
    a. Login Prompts, slowness - Since Monday, users are getting prompted to login. The prompt goes away after logging in at startup. It is also causing high CPU
    on the workstations.
    b. Free/Busy, Out of Office doesn't work. I can, however complete auto-setup for a new user, so autodiscover is not completely down for internal users.
    c. Checking Connection Status shows connecting status on highlighted entry below without ever establishing connection (just goes away).
    The outlook icon in the system tray says "Outlook is requesting data from the server":
    2. Using Non-cached mode 
    a. No Login Prompt at startup, business as usual
    b. Free/Busy, Out of Office works fine. Autodiscover is fine.
    c. Checking Connection Status shows normal except, it has "casarray URL, then status is referral" it seams to flicker this constantly then go away intermittently.
    d. Main issue in non-cached mode is, sometimes a user will log into windows, open outlook and it will not open and says "server is unavailable. Retry, work offline, or cancel" I can try re-opening, same message.
    Only after logging out of windows, logging back in, I can get back into outlook. This is not every time, or consistent with specific users, but random. 
    3. Lync Pop up  for credentials often, though entering the password.
    URLs are correct. Autodiscover, EWS, etc. 
    Already tried bypassing our loadmaster load balancer with host files on clients. same issue regardless of casarray node. 
    Not sure what is going on.
    Josh

    You have a hybrid configuration with Office 365, right?  You didn't provide this valuable piece of information.
    In Exchange Online PowerShell run this command:
    Get-OrganizationConfig | FL PublicFoldersEnabled
    If the value is "Remote" then users with Exchange Online mailboxes are looking to on-premises public folders.  Be sure that you have legacy pubic folder interoperability properly configured.
    http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • I may have found a software bug.  Ver 12.0.1.26   Was playing in non shuffle mode.  Turned shuffle back on but it is not doing it.  Any guesses?

    I may have found a software bug.  Ver 12.0.1.26   Was playing in non shuffle mode.  Turned shuffle back on but it is not doing it.  Any guesses?

    SadisticIron wrote:
    i just baught my first iphone and it is a jalbroken
    Buzz! Thank you for playing!
    Discussing jailbroken devices is forbidden here by the Terms of Service.
    You can not get help here.

  • Item field to non-editable mode(display mode) in Purchase Order(ME22n).

    Hi SDN,
    Based on the Comany code i need to modify the item level fields like <b>Item, Account Assignment, Material</b> to non-editable mode(display mode) in Purchase Order(ME22n).
    So i modifed in the method MODIFY_SCREEN_TC_LINE of class CL_TABLE_VIEW_MM and set the value L_FIELD_STATUS = *  for the screen filed MEPO1211-EBELP. When i execute, the whole column changed to display mode and the empty rows filled with 0(zero). But i want only grey mode for the line items that are present for that PO but not for the whole column. So can any one guide me to do so. I am using 4.6c.
    Thanks in Advance
    Regards
    Basha

    Hi Ramesh,
    Normally you can change the currency field, after entering information in Data base's table, go to Detail's table and change the rate as you want, then directly choose your PO number.
    so the system accept the rate entered aven though the PO had another rate.
    Regards.

  • Help Needed---Opening Attachments/Templates of a BP in non-editable mode

    Hi...
    I am new to CRM...
    How do we open a document/Template attached to a BP in non-editable mode in web UI?
    Helpful Answers would be rewarded.
    Thanks
    Swapna

    Hi...
    I am new to CRM...
    How do we open a document/Template attached to a BP in non-editable mode in web UI?
    Helpful Answers would be rewarded.
    Thanks
    Swapna

Maybe you are looking for