Change a price based on selected options...

Hey everyone. I know next to zero flash. I'm working on one of my first projects and would like to create a gallery of products that have two sets of options. For simplicity sake I'll use a shirt. If I have a specific shirt that costs different amounts based on a size of shirt and a color of shirt. If I have two flyout menus, I want to have a price text box that will change depending on what's selected. For example, medium and blue equals $50, medium and green equals $60, small and green equals $35.....so on and so forth. I'm at a complete loss and was wondering if any of you have ideas for what might be done. Thanks for any help.

You can use the arrays as you mentioned to populate the dropdowns with the display text and the value associated with the text.
OR
If the data is not going to change much then you can directly add the items to Dropdowns at the design time.
Then you need to write the code in the Calculate event of the Price field to display the price calculated from the the selections.
Hope this gives some idea..
Thanks
Srini

Similar Messages

Create a structure based on Selection option field values?

Hi Guys,
             can anybody tell me is ther anyway to creat a strucitre after giving the values to selection screen .I have a req where fiscal period is entered based on this i have to create a structure suppose i he give 3 to 8 then i have to create a strucure with with some fields including period3 period4 like that until Period8 so is there anyway tocreate like that or not?
Thanks,
Gopi.

You need an internal table not a structure. Either count from from the low value to the high value adding a record to the table or select the entries from the Period master table for that selection range.
Option 1
REPORT ZCOUNT.
tables: t009b.
select-options:
s_period   for t009b-poper no-extension.
data:
gt_poper type table of poper,
gs_poper type poper.
start-of-selection.
move s_period-low to gs_poper.
while gs_poper le s_period-high.
     append gs_poper to gt_poper.
     add 1 to gs_poper.
endwhile.
loop at gt_poper into gs_poper.
    write:/ gs_poper.
endloop.
endloop.
Option 2
REPORT ZCOUNT.
tables: t009b.
select-options:
s_period   for t009b-poper.
data:
gt_poper type table of poper,
gs_poper type poper.
start-of-selection.
select poper
    from t009b
    into table gt_poper
    where bdatj = '2007'
     and poper in s_period.
loop at gt_poper into gs_poper.
    write:/ gs_poper.
endloop.
Not sure if t009b is the right table.
Ta... JR

Changing field label for standard select option

Hi All,
I need to change the label for one of the standard select option for the custom report category.
the field is PNPSTAT1 - original label is - Customer-Specific Status - which i need to change as per customer requirement.
Can anyone tell me the way i can do it so that it can be viewed with correct label not only on the selection screen but in further selections mode as well.
Regards,
Raunak

Dear Raunak,
If you have standard select option for standard selection screen:
create a implicit enhancement for any standard program and wrote the below code at the end of the program and it is working..
INITIALIZATION.
%_s_PNPSTAT1%_app_%-text = 'ANY LABEL'.
If you have custom report select option, go to above Ravikiran's procedure.
Best of luck.
Regards,
Abbas.

How to create conditional text? (based on selected option, different text displays)

Hello, and thank you in advance for any assistance.
I need to create a .pdf with conditional text. Ideally, the user would select (via checkboxes) certain options, and only the text relevant to those selections would be included in the .pdf. Is this possible in Acrobat? If so, how? If not, what tool accomplishes this?
Many thanks.

Sorry 'bout that ! I was responding from e-mail and as you can see it's not working quite right. This is what I had wrote;
Tools ? What do you mean tools ? Adobe Acrobat is your tool. :-)
If you don't know javascript then you should entertain learning some if
you wish to "extend" Acrobat. That's the nature of the beast.
You may find some precompiled javascripts; but if you want customization
then you'll either have to pay someone to do it or yeah, learn javascript.
Check out Acrobatusers.com they have an excellent Acrobat Javascript section.
Best Regards,
Steve
Message was edited by: S.D.A.

How to change the select-options fields length to long

Dear friends:
   I had develop a program for sent email,and it have a field for fill mail address as below:
   data: lmail like adr6-smtp_addr.
   select-options: mailadd for lmail no intervals.
   my customer complain that the field is too short,but I can not change it to longer,the select-options component limit the visible length , how can i do for this problem!

Dear All:
I had realized this function.
I defined a parameter and a pushbutton to replace the select-option componet,
the code share as below.
data: lmail like adr6-smtp_addr.
SELECTION-SCREEN BEGIN OF LINE.
parameters: mailCopy like lmail.
selection-screen:pushbutton 64(5) pubu user-command mailButt.
SELECTION-SCREEN END OF LINE.
select-options: mailadd for lmail NO INTERVALS no-display.
at selection-screen output.
CLEAR l_count.
DESCRIBE TABLE mailadd LINES l_count.
IF l_count > 1.
    write ICON_DISPLAY_MORE as icon to pubu.
ELSE.
    write ICON_ENTER_MORE as icon to pubu.
ENDIF.
at selection-screen.
CLEAR l_count.
DESCRIBE TABLE mailadd LINES l_count.
IF NOT mailCopy IS INITIAL AND mailadd[] IS INITIAL.
    MailAdd-low = mailCopy.
    Append mailadd.
ENDIF.
IF l_count = 1 and mailCopy IS INITIAL.
    refresh mailadd.
    clear mailadd.
endif.
if sy-ucomm = 'MAILBUTT'.
    perform show_box.
endif.
*       FORM show_box                                                 *
FORM show_box.
TYPE-POOLS aqadh .
DATA: tab_and_field TYPE rstabfield.
tab_and_field-tablename = 'ADR6'.
tab_and_field-fieldname = 'SMTP_ADDR'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
       EXPORTING
            TEXT           = 'SET E-Mail To '
            tab_and_field = tab_and_field
       TABLES
            range          = MAILADD
       EXCEPTIONS
            no_range_tab   = 1
            cancelled      = 2
            internal_error = 3
            OTHERS         = 4.
IF NOT MAILADD[] IS INITIAL.
    READ TABLE MAILADD INDEX 1.
    MAILCopy = MAILADD-LOW.
ELSE.
    CLEAR MAILCopy.
ENDIF.
ENDFORM.

Hiding and then making select-options visible on the selection-screen

I've created a selection screen. On this i've got a field (pr_inpt) depending on whose value i have to display the rest select-options viz. (so_c1, so_n1, so_d1, so_t1) say ,
1.)if (pr_inpt) contains value 'A' then display (so_c1 & so_d1)
2.)if (pr_inpt) contains value 'B' then display (so_n1, so_d1 & so_t1)
To achieve it, in the initialization event, i looped at the screen and for all (so_c1, so_n1, so_d1, so_t1) i made screen-active = '0'. Due to this my objective to hide fields in the beginning is achieved.
Next when user is entering value into (pr_inpt), i am making screen-active = '1' at selection-screen output event, for those relevant select-options (say if A, then made active for so_c1 & so_d1) but my problem is that it is making all select-options (so_c1, so_n1, so_d1, so_t1) visible on the screen which i don't want.
How can i achieve this, also is it possible to change the label of the select-options while displaying.
Plz help.

hi just copy and paste following code into ur abap editor and see weather this logic helps u ????
REPORT Z_HRA1.
tables: pa0000, pa0001.
parameters: p_chk1 as checkbox user-command rusr,
p_chk2 as checkbox user-command rusr,
p_chk3 as checkbox user-command rusr,
p_chk4 as checkbox user-command rusr,
p_chk5 as checkbox user-command rusr.
selection-screen: begin of block blk1 with frame.
select-options: s_pernr for pa0000-pernr modif id ABC no-extension no intervals,
s_stat2 for pa0000-stat2 modif id DEF,
s_werks for pa0001-werks modif id GHI,
s_persg for pa0001-persg modif id JKL,
s_persk for pa0001-persk modif id MNO.
selection-screen: end of block blk1.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'ABC'.
IF p_chk1 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'DEF'.
IF p_chk2 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'GHI'.
IF p_chk3 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'JKL'.
IF p_chk4 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'MNO'.
IF p_chk5 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Regards
Gagan

Get Selection options from one view to another view

Hi Experts,
I am using two views, first view it shows basic list of records based on selection options criteria , here I used component WDR_SELECT_OPTIONS . Then if we click on any record in first view then it opens popup window with record relevant information. Here I want to get selection option values while editing record values.
Initially I used context node for one value, for that just I created node and attribute then bind to table then I used with method get_static_attributes_table( ) in second view.
But I need all values to be used in second view.
Please could you suggest, is there another way to get values into second view?
Regards,
BBC

Hello BBC,
you can access the SELECT_OPTION component usage in second view and then you retrieve the selection fields and its corresponding range table. In this case the component usage instance will be shared across the application unless you explictly delete the component usage.
BR, Saravanan

How To... Change the Data Type for a SELECT-OPTIONS at run time.

Hello,
I am trying to restrict the values available for entry into a SELECT-OPTIONS at run time depending on user input.
The logic is as follows. The user has two input fields. A PARAMETER field which has the type RSDIOBJNM and allows them to choose an InfoObject. And the user has a SELECT-OPTIONS field to allow them to select the Characteristic values for that InfoObject.
I would like the following example to be possible:
The user enters 0MATERIAL into the PARAMETER. When the user clicks on the SELECT-OPTIONS control code will derive a list of possible options the user can enter in the SELECT-OPTIONS. In this case only values found in the master data or at least no values greater than 18 characters.
I have looked at the following function module SELECT_OPTIONS_RESTRICT and this do not appear to be helpful as they only restrict on the signs allowed for the values (unless I misunderstand, it is a complex function module!).
The code I have so far is (thus the user enters a InfoObject into p_char1 and the select options so_char1 should only accept active values of that InfoObject):
declaration of variables for user interface
DATA c_char(32) TYPE c.
declaration of count variable
DATA i_count TYPE i.
declaration of user interface
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
    PARAMETERS: p_ipack TYPE RSLOGDPID.
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
    PARAMETERS: p_char1 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char1 for c_char NO INTERVALS.
    PARAMETERS: p_char2 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char2 for c_char NO INTERVALS.
    PARAMETERS: p_char3 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char3 for c_char NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b1.
Is what I am trying to do possible???
Thanks for any help. Ross.

You really want to restrict possible values of a select-option based on another field, not change the length of type of the select-option field, right?
Here is what you do: Code a custom F4 value help for the select-option at event AT SELECTION-SCREEN ON VALUE REQUEST FOR.. The first thing you do here is read the value of the parameter field (p_ipack in your example). You can use function module DYNP_VALUES_READ. Based on this value, you can propose values for the select-option fields. Note that the use can still enter whatever s(he) wishes in to the select-option field without pressing F4. In this case, you will have to code some input validations taking into account the value in the p_ipack field.

Change Template Logo based on the selected values...

Hi All,
It is possible to change the logo based on the values or company I've selected. Its for invoice template since we have multiple client. The management want to change logo every time they select specific company invoice. Thanks
Whel

yes..you can achieve with one conditional formatting report..I am Talking about OBIEE reports only not publisher thing
1)upload all your images in /Images folder of server
2)create one Report with Company name column,click edit Column properties--> conditional formatting--->add conditions as required like Company name ='Oracle'-->In format window select Image and select Custom Image -->fmap:images/oracle.jpg-->in default select "Image only" option-->repeat for all images-->Make this company column as "is prompted" -->save the Report-->put this report on the dash board where that company prompt is available...and see results :).I implemented it successfully

In BI how to filter the selection options based on inputs on top field

Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram M

Hi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Changing property of select options

Hi I have created a select options with the property read only = true by default, If a condition at the beginning is fulfilled I want to change the property read only of the previous field to false. I am doing it in the following way:
    DATA lt_range_table TYPE REF TO data.
Data from select options
    rt_objid = wd_this->m_handler->get_range_table_of_sel_field( i_id = zdcl_wdr_matriz_decision_asf=>e_atrib_m_dec_asf-grupo_form ).
    ASSIGN rt_objid->* TO <fs_objid>.
Create range tabl
    lt_range_table = wd_this->m_handler->create_range_table( i_typename = zdcl_wdr_matriz_decision_asf=>e_atrib_m_dec_asf-tipo_d ).
    DATA: id TYPE string.
    id = zdcl_wdr_matriz_decision_asf=>e_atrib_m_dec_asf-tipo_d.
    REPLACE ALL OCCURRENCES OF REGEX '\W' IN id WITH '_'.
    IF NOT <fs_objid> IS INITIAL.
    update property
      wd_this->m_handler->upd_selection_field(
       i_id              = id
       it_result         = lt_range_table
       i_read_only       = abap_false ).
    ENDIF.
What is wrong here please?
Help really appreciated

Hi Jorge.
Why do you perform the replacement? Are you sure, that the ID you used while adding the field is the same as the one you use for updating? What is the rror or does just nothing happen?
Cheers,
Sascha
Message was edited by:
        Sascha Dingeldey

How can i create a dynamic structure based on my input from a select-option

Hello,
This is to develop a custom report in FI for G/L Balance based on company code.
I have an input select-option for Company code.
Based on the range of company code my output layout should be modified.
I am not very much sure to create a dynamic internal based on the input from a select-option.
Can any one please let me know how can i do this.
I would appreciate for anyone who turns up quickly.
Thank you,
With regs,
Anitha Joss.

See the following program, it builds a dynamic internal table based on the company codes from the select option.
report zrich_0001 .
type-pools: slis.
field-symbols: <dyn_table> type standard table,
               <dyn_wa>.
data: alv_fldcat type slis_t_fieldcat_alv,
      it_fldcat type lvc_t_fcat.
data: it001 type table of t001 with header line.
selection-screen begin of block b1 with frame title text-001.
select-options: s_bukrs for it001-bukrs.
selection-screen end of block b1.
start-of-selection.
select * into table it001 from t001
                 where bukrs in s_bukrs.
perform build_dyn_itab.
* Build_dyn_itab
form build_dyn_itab.
data: index(3) type c.
data: new_table type ref to data,
        new_line type ref to data,
        wa_it_fldcat type lvc_s_fcat.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = 'PERIOD' .
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
append wa_it_fldcat to it_fldcat .
loop at it001.
    clear wa_it_fldcat.
    wa_it_fldcat-fieldname = it001-bukrs .
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 4.
    append wa_it_fldcat to it_fldcat .
endloop.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
               exporting
                  it_fieldcatalog = it_fldcat
               importing
                  ep_table        = new_table.
assign new_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
Regards,
Rich Heilman

Can I change the select option text for pnp ldb ?

hi Akll,
I am using a pnp logical database in my report and I have created my own hr category because i wanted to use field ename from the ldb in the selection screen. Now the problem with ename is I cant do a case sensitive search.
So I have replaced it with sname, so now my screen has sname instead of ename, however I want to change the selection text for select option ( at present it is 'EE name can be sorted' )
Kindly advise,
thanks,
GV

I guess the text cannot be changed.. anyways you can add the field as an additional field by normal coding in your report

Creating select option with the search help based on other select option

Hi,
I have displayed a selection screen with two select options S1 and S2.
My requirement is that the values in the search help of S2 should get filled based on the values selected in S1.
Note: User has option to select multiple values in S1.
Does anybody know how to implement this?
Thanks,
Feroz

>
Sanjeeva wrote:
> Hi,
>
> With standard f4 you cannot acheive this. You need to write customise with OVS or Simple value selector by reading S1 selected values.
>
> Thanks,
> Sanjeev
I'm getting fairly tired of seeing this completely incorrect information on this forum. As stated before and already found out by this poster, you can map input and output values between multiple data dictionary search helps. You do NOT have to resort to using OVS for this option.

Change a price based on selected options...

Similar Messages

Maybe you are looking for