Change component for partial GR subcon PO (urgent!!!)

Hi, there,
Is there any user exit or enhancement for changing component requirements of partial GR subcon PO? In standard functionality, it's disallowed to modify component data if partial GR is done to subcon PO.
However, in reality, we need to change component requirement. Any input is welcome.
Regards,
Nancy

Hi,
If any adjustments are to be done related to component consumption, then use TCode: MIGO, subsequent adjustment then do the necessary adjustments.
For further help, just go through the link:
http://help.sap.com/saphelp_47x200/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm
Hope this helps.
Thanks,
Viswanath

Similar Messages

  • Change cctr for partial GR

    we have already done partial good receipt for one PO, how to change the cost ceter assignment for that po

    Hi,
    If these was any of the freight condition on a PO and if GR has been posted for PO, changing on the account assignment data will not be possible any more, even if the GR document has been reversed.
    You can change information like cost center if you select "acct.assg.changeable" for a given account assignment category.
    Before changing the account assignment data in PO please have a look at notes 210019 and 457511 question 5.
    Please ensure in OME9 the indicator 'Acct. asst. changeable' is set and allow the account assignment to be changed also after goods receipt.
    Please try this in a test system first and test throughly
    regards
    Waman

  • Is price change possible for Partially billing

    Hi ALL,
    I have done partial billing for a sales line item, now in the sales order can i change the price(PR00) for that  line item.
    Eg: QTY=100, i have done billing for 50. can i know change the price(PR00) for that line item in Sales Order.
    Thanks in advance
    regards
    Prasad

    Hi Prasad,
    No, as per standard its not possible. But yes you can update the price of remaining items in billing.
    Thanks,
    Raja

  • Changing country for adobe cc membership? (URGENT)

    Hello I have permanently moved from canada to india but my creative cloud membership is canadian, in my credit card info I can not change my country please let me know what to do? I dont have money in my canadian bank account.

    Hi Amritpaldesign,
    I have checked your account and I see the issue has been resolved with our customer support.
    If you require further assistance, please do not hesitate to come back to us.
    Thank you.
    Arnaud.

  • How to change material component for a Purchase Order?

    How to change material component for a Purchase Order?
    I need FM .
    PLEASE help

    Dear ,
    Create PO with item category L....There in Item detail you will get tab for material.
    There click in component Button, it will take you to the component screen there you can assign and deassign components.
    Hope this helps.
    Regards
    Utsav

  • Change of Source Structure for Partial Settled WBS elements - CJ02

    Hi
    As per standard SAP, the change of source structure under settlement perameters of WBS element is not supported when the settlement of WBS element is done either partial / full.
    However, the client needs this change by doing any Z-Development as one time activity (since the source structure was changed for certain WBS elements as per change in business process).
    Can i Know procedure to do the Z development to modify the source structure for partial settled WBS elements and also let me know the any side effects in this regard.
    Regards
    Anil

    Hi Anil,
    I agree with Ajay. You can try to change it in Debugging mode.
    The values are handed over from include LCJWBF5Q (form project_settle_single using)      
    Some customer have also made a modification as a permanent solution.    
    Unfortunately in the standard it is not possible.
    regards Bernhard

  • How to change component / actual used material during MIGO for Suncontract

    Hi
    We have below scenario, need your expert help...
    1) As per BoM Material A- is produced from Mat B.
    2) Sub-contact Order is created with Mat A and Mat B is sent to Vendor with Mov type 541.
    3) In few cases Mat A can be produced with Mat C / mat D etc
    4) Now at the time of MIGO..we will come to know that which mat is used .
    Question: -  Can I change component material at the time of MIGO. I mean can change component material from Mat-B  to Mat C etc.

    Hello Rajesh,
    You need to change the component in Purchase order (ME22N). there is not separate table for this.
    - Go to ME22N transaction
    - Select the line item for final product
    - Go to Material tab and click on "Component" at rightside
    - Add new material number here
    - You can keep old material or delete it.
    Hope this helps.
    Regards
    Arif Mansuri
    Reward if answer is helpful

  • Component pick release for partial quantity

    Hi All,
    For R12 environment , customer needs move order to be created for partial quantity using component pick release.
    As far as I know component pick release cannot be done for partial pick release and only possible when onhand qty is not available.
    Can any one pleas elet us know if we can have any alternate solution or easy customization so that client can edit the quantities before going to move order creation?
    Thanks
    Vasudha

    when the move order is created..update the allocation and then perform transact move order
    ex if for 10 qty move order is created..but if u wish to issue 5 qty to the job..then update the allocation..for the remaining u can just backorder the move order
    HTH
    Mahendra

  • ADF Faces - Change style for menuTab component

    How to change color for menuTab components (selected and enabled)?
    I do not want to create new style, all I need is just change some colors and fonts for default oracle style.
    I was able to change color for table, overridinf some styles in my css-file, but overriding
    <af_menuTabs_selected> and <af_menuTabs_enabled> did not work, because on generated html-page menuTab components do not use any styles. Is there any workaround to change color of that component?
    Thanks.

    public String commandButton_action() {
    ot_msg.setValue("Hello");
    AdfFacesContext.getCurrentInstance().addPartialTarget(ot_msg);
    The code above works fine but I nead also, in the method, to generate a excel file with JXLS librairie.
    The file can takes a long time to download and thus I want to change the value of outputText while the file is generating and not after.
    How can I do that ?
    Thanks

  • COR1 -User Exit -for changing Component values

    Hi,
    We have following exits for COR1.Can anybody help me in locating the right match for my requirement.My need to change the item requiremnet quantities in material tab of COR1 t-code.
    I tried PPCO0008 & PPCO0001.For some reason it does'nt reflect the changes.
    For PPCO0008 even though i keep a break-point it is not stopping at this.
    Any ideas?
    CCOWB001            Customer exit for modifying menu entries                        
    COIB0001            Customer Exit for As-Built Assignment Tool                      
    COZF0001            Change purchase req. for externally processed operation         
    COZF0002            Change purchase req. for externally procured component          
    PPCO0001            Application development: PP orders                              
    PPCO0002            Check exit for setting delete mark / deletion indicator         
    PPCO0003            Check exit for order changes from sales order                   
    PPCO0004            Sort and processing exit: Mass processing orders                
    PPCO0005            Storage location/backflushing when order is created             
    PPCO0006            Enhancement to specify defaults for fields in order header      
    PPCO0007            Exit when saving production order                               
    PPCO0008            Enhancement in the adding and changing of components            
    PPCO0009            Enhancement in goods movements for prod. process order          
    PPCO0010            Enhancement in make-to-order production - Unit of measure       
    PPCO0012            Production Order: Display/Change Order Header Data              
    PPCO0013            Change priorities of selection crit. for batch determination    
    PPCO0015            Additional check for document links from BOMs                   
    PPCO0016            Additional check for document links from master data            
    PPCO0017            Additional check for online processing of document links        
    PPCO0018            Check for changes to production order header                    
    PPCO0019            Checks for changes to order operations                          
    PPCO0021            Release Control for Automatic Batch Determination               
    PPCO0022            Determination of Production Memo                                
    PPCO0023            Checks Changes to Order Components                              
    STATTEXT            Modification exit for formatting status text lines              
    Rgds
    Praveen

    Hi
    Try this Exit.
    PPCO0007  Exit when saving production order
    in that EXIT_SAPLCOZV_001  Function Exit.
    The structure has the fields and it will trigger while saving.
    Regards,
    Bala Krishna

  • How can I change the default wording of scrolling component for datatable

    Hi,
    Is it possible to change the default wording (i.e. "previous n" and "next n") shown on scrolling component for datatable? how ?
    I created a datatable based on a custom vector bean class. By default the count shown on scrolling component indicates number of rows (i.e. first 2 rows, next 2 rows). What I want is to show (if it is a 2X2 table) first 4 (items) and next 4 (items).
    Any suggestion?

    Not only can you set global values for each of the three columns, but you can also set unique column widths on a per community basis like this:
    .ptCommunity-1234 .columnOne { width: 635px; border-right:1px solid #CCCCCC; padding-top: 10px; padding-right: 20px; }
    .ptCommunity-1234 .columnTwo { width: 240px; padding-top: 10px; padding-left: 8px;}
    You can see here my community #1234 has a wide first column and a more narrow column two and even puts a little solid line between them.
    It's all in the stylesheets on your imageserver at the path I mentioned earlier. Again, look at the experience definition object in your admin portal and look at the stylesheet name in the dropbox. The stylesheet name you see is mapped to the .css file using the community-themes.txt file in the same ...yadayada/common/public/css folder on the imageserver.
    If you have, lets say, a mainstyle1-en.css that only has about a dozen lines dictating only the few items you mentioned before - then it has been stripped at one time because the default that comes w/ an original install is huge and a great starting point. It even has style tips and snippets in comment blocks to tutor you through its gargantuan variety of options.

  • How to change password for a user in WLS 7.0 embedded ldap in code?

    I asked the similar question before but don't have an answer yet.
    I need to change password for a user in my Java code. Any help will be
    appreciated.
    Here is my stack trace:
    c:\Test>java -classpath . testEmbeddedLdap
    attribute: uid
    attribute: description
    attribute: objectclass
    attribute: wlsMemberOf
    attribute: sn
    attribute: cn
    javax.naming.NoPermissionException: [LDAP: error code 50 - Insufficient
    Access Rights]; remaining name
    'uid=myRegularUser,ou=people,ou=myrealm,dc=mydomain'
    at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:2872)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2810)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2616)
    at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1374)
    at
    com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDir
    Context.java:255)
    at
    com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(Partial
    CompositeDirContext.java:172)
    at
    com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(Partial
    CompositeDirContext.java:161)
    at
    javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.
    java:146)
    at testEmbeddedLdap.main(testEmbeddedLdap.java:30)
    Here is my testing code:
    <PRE>
    import java.util.*;
    import javax.naming.*;
    import javax.naming.directory.*;
    public class testEmbeddedLdap {
    public static void main(String[] argv) {
    Hashtable env = new Hashtable(11);
    env.put(Context.INITIAL_CONTEXT_FACTORY,
    "com.sun.jndi.ldap.LdapCtxFactory");
    env.put(Context.PROVIDER_URL, "ldap://localhost:7001");
    env.put(Context.SECURITY_AUTHENTICATION, "simple");
    env.put(Context.SECURITY_PRINCIPAL, "uid=myAdministrator, ou=people,
    ou=myrealm, dc=mydomain");
    env.put(Context.SECURITY_CREDENTIALS, "myAdministrator");
    try {
    DirContext ctx = new InitialDirContext(env);
    String
    sUser="uid=myRegularUser,ou=people,ou=myrealm,dc=mydomain";
    String sOldPassword="myRegularUser";
    String sNewPassword="newpassword";
    for (NamingEnumeration ae = ctx.getAttributes(sUser).getAll();
    ae.hasMore(); ) {
    Attribute attr = (Attribute)ae.next();
    System.out.println("attribute: " + attr.getID());
    ModificationItem[] mods = new ModificationItem[2];
    Attribute mod0 = new BasicAttribute("userpassword",
    sOldPassword);
    mods[0] = new ModificationItem(DirContext.REMOVE_ATTRIBUTE,
    mod0);
    Attribute mod1 = new BasicAttribute("userpassword",
    sNewPassword);
    mods[1] = new ModificationItem(DirContext.ADD_ATTRIBUTE, mod1);
    ctx.modifyAttributes(sUser, mods);
    ctx.close();
    } catch (NamingException e) {
    e.printStackTrace();
    </PRE>
    "Neil Smithline" <[email protected]> wrote in message
    news:[email protected]...
    Two things. First, I'm not exactly sure what password you are trying to
    change. The LDAP server's password or a user's password in the LDAP
    server. Second, could you please post a stack trace.
    Thanks - Neil
    K Wong wrote:
    I am using (javax.naming.directory.DirContext.modifyAttributes) to
    change
    password to our development Weblogic 7.0 embedded LDAP.
    I login as the system administrator (a user in the administratorsgroup),
    but always gets the javax.naming.NoPermissionException - InsufficientAccess
    Rights.
    What user should I use? Any help will be appreciated.

    Hai,
    This condition based execution requires - javascript coding.
    In miscelleaneous tools bar, you have an option of SCRIPT_ITEM writer tool, drag the tool into your WAD layout, and select the properties , choose the editor option and paste your coding. that's it.
    Alternate option :
    in your web application design layout , you will fine XHTML coding editor , there you need to write coding and execute the same.
    Hope this will help to you.
    Assign Points if its really useful.
    Cheers !!!
    Bye
    Regards,
    Giri

  • Total Delivery Cost for partial Item delivery

    Hi Guru,
    I have a requirement wherein I have to apply the total delivery cost for partial Item delivery.
    For example: Even if there is partial GR, delievery cost must be paid in full.
    Say PO is for 100 PC and delivery cost is 100 EUR. Now at MIGO if the delivered quantity is 60, the freight vendor must still be paid 100 EUR.
    Is this possible by configuration or do we need to make any changes at code level? If yes, Please guide me on how to do that....

    Create a PO without tick GR-Bsd IV, suppose I have created PO with qty 20 and rate 1 INR and give freight 50 INR (Fixed Amount)..
    Then I have done partial GR for qty 5. My freight amount booked as 12.5 INR (for partial GR)
    Then I have gone for MIRO..
    Here select Goos/Service item + Planned delivery cost.
    Enter the PO, you can see two line items appear..
    One for goods and one for freight...
    Goods will come as qty 5 and amount 5 INR and Freight will come as qty 5 and amount 12.5 INR.
    Just change the freight qty and amount as 20 and 50 INR.
    Then post the MIRO, you can see your total freight will be booked to vendor..
    Now again do GR for qty 2, at that time your freight amount will booked as 5 INR.
    Then when you will go for MIRO, you can see only the GR item, Freight qty and amount will not come at the time MIRO..
    (Note : I have told the scenario as per my previous screen shot)

  • TS1544 I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but  when I try to see his account, it says I need to provide the keychain password. How can i get

    I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but  when I try to see his account, it says I need to provide the keychain password. How can i get it? I have no idea how to sort this out...

    First, make sure caps lock is not on.
    You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
    If you forget the password and FileVault is on

  • Delivery remaining quantity for partial delivery in STO

    Dear All,
    i have a requirment.in STO NLCC delivery we need to do delivery for partial quantities.

    it is a Typo mistake (System error)again i am posting this
    i have a requirement STO NLCC delivery we need to do delivery for partial quantities(this is the requirment please do not ask why you need this )
    in PO (NB) quantity is 10
    in NLCC delivery i changed it to 5.and did PGI  and Billing for 5 quantities.
    in the PO the remaining quantity 5 is still there.i want to do delivery for that 5 quantities by using VL10B.but it is not appearing in the List.
    could anybody worked this scenario before, then please guide me how to do delivery for remaining quantities.
    Regards
    sundar

Maybe you are looking for